Blu-ray Object: "Sept-Nov_2008", Error: "invalid format", Code: "14", Note: "ERROR: This stream does

I am trying to transcode a self contained FCP quicktime movie file and I get the message - Blu-ray Object: "Sept-Nov_2008", Error: "invalid format", Code: "14",
Note: "ERROR: This stream doesn't include Picture timing SEI, Unit Offset = 785835706". I am going to use quicktime pro 7 to import  a quicktime movie instead of FCP self contained file into encore. But if anybody has any suggestions, please let me know. I have read about wrong field orders but I am using a custom preset with the field order set to upper (odd) - since I am using a Apple ProRes 422 (proxy) for the FCP sequence.

This thread might be helpful:
http://adobe.hosted.jivesoftware.com/message/3460426
-Ramesh

Similar Messages

  • Blu-ray Error: "invalid operation", Code: "19", Note: "primary video stream attributes must be consi

    When i try make a blu Ray (folder or image) i receive this error "
    Blu-ray Object: "<Timeline>Untitled Timeline", Error: "invalid operation", Code: "19", Note: "primary video stream attributes must be consistent with playList"
    is a specific error for blu ray?
    Whats happen?.
    Thanks a lot
    If I create a dvd, all is right, no error are showed a dvd folder is created

    Hello:
    Finally I could make the Blu Ray disc.
    The problem was in put in the same timeline two files in mpg format and psd file with 6 seconds of duration.
    (no compatible timeline, causes error code 19)
    For  a right process a put each file in sperate timeline and end action link to the next file, Then, all go right an BR plays fine.
    Maybe there was somthing diferent inside each mpg file , incompatble for a same timeline.
    The mpg files were extratecd from dvd (vob files)
    I hope that my exprerince help in the future to others persons with the same problems
    Thanks all for support
    Regards

  • Can anyone advise on this error: "Timeline", Error: "invalid format", Code: "14", Note: "Unknown

    Hello,
    Attempting to author a basic Blu-ray disc.  Everything appears to be ok when I run the build check to make sure that the disc will write out correctly.  When I start to build and burn the disc, Encore begins to import the video asset, and then quits with the following error message:
    Blu-ray Object: "<Timeline> Untitled Timeline", Error: "invalid format", Code: "14", Note: "Unknown exception"
    Does anyone have any thoughts regarding this error?  In the project timeline, everything plays ok - picture and sound.  I am importing a MPEG-2 file that came out of Compressor as an .m2v file.  Not sure if this could be the cause of the invalid format.  If so, odd that it imports into the project and simulates ok.
    Thanks,
    Mtbakerstu

    Thanks Stan.
    The project originates in Final Cut Pro, so it is easier for me to export out directly from FCP than to make an intermediate file to go into Premiere Pro.  Also, going directly makes it more fool proof in terms of potential downstream issues with the MPEG encode.
    That said, do you have a file format recommendation if I were to export a master file out of FCP, and then import into PP ?
    Regarding if I want the M2V to work, do you know what setting might be causing the error... presuming that's the issue.  Does it make sense that I would be able to see the video file workin in Encore, but when I try to then "build" it fails?
    Thanks again, feedback most appreciated!
    Mtbakerstu

  • Blue-Ray Object: "Menu"; Export File Not Found--Any Clues?

    Trying to build a Blue-Ray DVD in CS3 (version 3.0.1.008). Project has motion menus and previews without errors. Upon trying to build either a disc or image I get the error
    Blue-ray object: "Menu"; Export file not found.
    Where "Menu" is the name of one of the sub menus in my project.
    Has anyone seen this error? What is an Export file? When and how does it get created?
    I have successfully burned this project to a standard DVD format.

    I have the pleasure of closing out my own question. I found the following post that was the clue I needed.
    http://forums.creativecow.net/readpost/145/857374
    It would appear that the Blue Ray build process is a lot more sensitive to file naming. I brought into my project a menu that I used as a starting template, I edited it in Photoshop and then renamed it in Encore. During the Blue Ray build process Encore rendered the menus to the original template names, but when it needed them to build the DVD it looked for the files that had the new names I had given the menus in Encore.
    Here is the fix. I exported the final menus using the Save as Template function in Encore. I then re-imported them as menus and relinked them to the DVD assets. Everything worked fine from that point on.
    The interesting thing is this did not happen when building a standard DVD using the same menus.

  • I'm trying to create a list using CustomSchemalXml property in ListCreationInformation object in CSOM. But, the code throws an error "Invalid List Schema".

    I'm trying to create a list using CustomSchemalXml  property in ListCreationInformation object in CSOM. But, the code throws an error "Invalid List Schema". Any pointers on how to set the CustomSchemalXml property?
    Sri

    Hi Lakshmanan,
    Thanks for your reply.
    I checked this post and there was no solution to the problem there. I undersand we cannot create a list based on custom template in CSOM, but what I'm looking for is how of form xml and set it to CustomSchemalXml
     property, so that everytime when I want to create a list with similar content types and stuff, I can just set the
    CustomSchemalXml  property. 
    Sri

  • "Invalid access code (Bad parameter)" error encountered when trying to import VSS DB into TFS 2012

    I'm trying to import a VSS DB into TFS 2012 using the VSS Upgrade Wizard.
    However, I'm getting an "Invalid access code (Bad parameter)" error when I click the "List Available Projects" link button.
    I have been able to get the wizard going with a different VSS DB, but not this one.
    How can I fix this and get the import going?

    Hi,
    Thank you for your post.
    Do you use OLE Automation objects when you log on VSS? Please refer to this
    FIX: VSS OLE Automation Error Message "Bad Access Parameter"
    Regards,
    Lily Wu
    MSDN Community Support | Feedback to us
    Develop and promote your apps in Windows Store
    Please remember to mark the replies as answers if they help and unmark them if they provide no help.

  • Adobe Print Form Error - Invalid Response Code: (401) Unauthorized

    Hi, I've just configured ADS on Netweaver 2004s. I've run through the config guide and everything works ok including the form generation test report FP_TEST_00 which outputs PDF without issue. I have two problems:
    -When I run a "test connection" on the RFC destination 'ADS' using the ADSUSER for the login details, I get a 403 not authorized error. Changing this user to J2EE_ADMIN resolves the issue and I get a 302 redirect. I've tried adding other permissions to the ADSUSER without any luck.
    -Running a report on the Portal under e.g. Executive Reporting and attempting to just right-click and hit "Print Version" results in a 401 error for request "http://hostXX:portXX/AdobeDocumentServices/Config?style=document" exactly as per this thread: Re: Adobe Form Creation Error - Invalid Response Code: (401) Unauthorized. However, I've double-checked all user details in Visual Administrator (ADS_AGENT) and on the ABAP stack side in su01 and sm59. I also tried changing the users to dialog with no effect. If I go directly to that URL and log in with ADSUSER I get a 403 not authorised error (using J2EE_ADMIN is again successful). I've noticed that in the http access log the HTTP protocol used is 1.1 when using the web browser and 1.0 when using the sm59 connection test. I've heard of problems with using HTTP/1.1, but when I change the options on IE8 to use HTTP/1.0, it changes for all other requests except the request for "http://hostXX:portXX/AdobeDocumentServices/Config?style=document", which is still submitted as HTTP/1.1. Conversely, in sm59 if I specify that it should use HTTP/1.1 under Special Options, I can see from the access log that it is in fact still using HTTP/1.0. Could this be related to the 401 error code that I'm seeing?
    Any help would be appreciated. Thanks,
    John

    I think I've ruled out the HTTP protocol version as being an issue here. However I may have found more useful information on the actual issue.
    In the security log under usr\sap\<SID>\DVEBMGS00\j2ee\cluster\server0\log\system I see a different message for the unsuccessful report PDF generation attempt to that of a direct query to the same URL with the same web browser, as below. The unsuccessful attempt appears to forget the ADSUSER credentials and resort to the default J2EE_GUEST which has no authorisations and therefore fails. The direct query doesn't lose the ADSUSER credentials and I think this is because it prompts for the user/password when needed. Does anyone know why this happens for a direct query to this URL but not for the PDF generation attempt?
    Resulting logs from unsuccessful PDF generation attempt:
    #1.5 #005056AF1EB300750000002D0000142000048B4D2208F055#1279063306899#/System/Security/WS/SecurityProtocol#sap.com/irj#com.sap.security.core.client.ws.AuthenticationContext.setDestination#AICL0001#622##<host>_<sid>_3576650#AICL0001#4c1a62608ed511dfbe2a005056af1eb3#SAPEngine_Application_Thread[impl:3]_5##0#0#Info#1#com.sap.security.core.client.ws.AuthenticationContext#Java###An destination was set with the following properties:
    {0}.#1#{PROXY_ENABLED=false, CLIENT_AUTHENTICATION_KEYSTORE_VIEW=, SAP_SID=, SLD_URL=, USERNAME=ADSUSER, SLD_WS_NAME=, URL=http://<host>:50000/AdobeDocumentServices/Config?style=document, PROXY_URL=, SSL_SERVER_AUTHENTICATION=IGNORE, SLD_WS_SYSTEM_NAME=, PASSWORD=XXX, SLD_WS_PORT=, SAP_CLIENT=, DEFAULT_URL=http://localhost:50000/AdobeDocumentServices/Config?style=document, Authentication=BASIC, CLIENT_AUTHENTICATION_KEYSTORE_CERTIFICATE=, URL_CHOICE=Custom, SAP_LANGUAGE=}#
    #1.5 #005056AF1EB30072000000250000142000048B4D220A12ED#1279063306977#/System/Security/Authentication##com.sap.engine.services.security.authentication.logincontext#J2EE_GUEST#0##<host>_<sid>_3576650#Guest#4c1a62608ed511dfbe2a005056af1eb3#SAPEngine_Application_Thread[impl:3]_24##0#0#Info#1#com.sap.engine.services.security.authentication.logincontext#Plain###LOGIN.FAILED
    User: N/A
    Authentication Stack: com.adobe/AdobeDocumentServices*AdobeDocumentServices_Config
    Login Module                                                               Flag        Initialize  Login      Commit     Abort      Details
    1. com.sap.engine.services.security.server.jaas.BasicPasswordLoginModule   SUFFICIENT  ok          exception             true       Authentication did not succeed.#
    Successful direct access of URL http://<host>:50000/AdobeDocumentServices/Config?style=document (click on rpData test and manually log in as ADSUSER):
    #1.5 #005056AF1EB30070000000250000142000048B4D3E260016#1279063778670#/System/Security/Authentication##com.sap.engine.services.security.authentication.logincontext#ADSUSER#675##<host>_<sid>_3576650#Guest#812f72008ed611dfa62d005056af1eb3#SAPEngine_Application_Thread[impl:3]_14##0#0#Info#1#com.sap.engine.services.security.authentication.logincontext#Plain###LOGIN.OK
    User: ADSUSER
    Authentication Stack: com.adobe/AdobeDocumentServices*AdobeDocumentServices_Config
    Login Module                                                               Flag        Initialize  Login      Commit     Abort      Details
    1. com.sap.engine.services.security.server.jaas.BasicPasswordLoginModule   SUFFICIENT  ok          true       true                 
    Central Checks                                                                                true                  #
    #1.5 #005056AF1EB30070000000260000142000048B4D3E2666A6#1279063778702#/System/Security/Audit/J2EE##com.sap.engine.services.security.roles.audit#ADSUSER#675##<host>_<sid>_3576650#ADSUSER#812f72008ed611dfa62d005056af1eb3#SAPEngine_Application_Thread[impl:3]_14##0#0#Info#1#com.sap.engine.services.security.roles.audit#Java###{0}: Authorization check for caller assignment to J2EE security role [{1} : {2}].#3#ACCESS.OK#SAP-J2EE-Engine#all#

  • I have just bought a hdmi tv and would like to view very high quality images, using apple tv, stored on my external hard drive. I also have blue ray movies stored on my external hd. will i be able to stream these to my tv and view them in 1080p?

    I have just bought a hdmi tv and would like to view very high quality images, using apple tv, stored on my external hard drive. I also have blue ray movies stored on my external hd. will i be able to stream these to my tv and view them in 1080p?

    sorry, why isn't correct?
    i try convert video with quick time to apple tv, import in itunes( that's ok)  but is impossible to synchronize my apple tv ( unsupported file).
    where I wrong?
    please could you explain me the correct procedure?
    i have some video ( holiday movie an photo movie in mpeg2 full HD) to convert for apple tv, and from 2 years some video editing with imovie.
    normally I prepare my video with Imovie, create a file .mov full hd (like master)  and with roxio convert file for apple TV.
    apple world is new for me, after 25 years with microsoft!
    thank so much
    mauro

  • Invalid Response Code: (502) Proxy Error

    I am getting following error when trying to consume a web service using a proxy .
    I have two Server, named A and B
    The wsdl file was generate at A by Function Module => Utilities => More Utilities => Create Web Service => From Function Module. And I can send data in Web Services Navigator(A Server ).
    So I import it in Web Dynpro as a model.But I deploy it in another J2EE engine(B Server).
    the Error log:
    java.rmi.RemoteException: Service call exception; nested exception is: com.sap.engine.services.webservices.jaxrpc.exceptions.InvalidResponseCodeException: Invalid Response Code: (502) Proxy Error ( 找不到主机。 ). The requested URL was:"http://hqbd3.sinopec.com:8000/sap/bc/srt/rfc/sap/ZHQMRO_RP_RYJG_WS?sap-client=200"com.sinopec.bwbcs.wd.rpryjg.batchinput.medol.proxies.ZHQMRO_RP_RYJG_WSSoapBindingStub.bicCfzhqmroRpRyjg(ZHQMRO_RP_RYJG_WSSoapBindingStub.java:99) com.sinopec.bwbcs.wd.rpryjg.batchinput.medol.proxies.ZHQMRO_RP_RYJG_WSSoapBindingStub.bicCfzhqmroRpRyjg(ZHQMRO_RP_RYJG_WSSoapBindingStub.java:108) com.sinopec.bwbcs.wd.rpryjg.batchinput.medol.Request_ZHQMRO_RP_RYJG_WS_bicCfzhqmroRpRyjg.execute(Request_ZHQMRO_RP_RYJG_WS_bicCfzhqmroRpRyjg.java:87) com.sinopec.bwbcs.wd.rpryjg.batchinput.RpryjgBatchCreate.assignElementToRpryjgListData(RpryjgBatchCreate.java:387) com.sinopec.bwbcs.wd.rpryjg.batchinput.RpryjgBatchCreate.createRyjgData(RpryjgBatchCreate.java:320) com.sinopec.bwbcs.wd.rpryjg.batchinput.RpryjgBatchCreate.onActionBatchInput(RpryjgBatchCreate.java:217) com.sinopec.bwbcs.wd.rpryjg.batchinput.wdp.InternalRpryjgBatchCreate.wdInvokeEventHandler(InternalRpryjgBatchCreate.java:261) com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87) com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67) com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleActionEvent(WindowPhaseModel.java:420) com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:132) com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335) com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143) com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:313) com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713) com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666) com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250) com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149) com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62) com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53) javax.servlet.http.HttpServlet.service(HttpServlet.java:760) javax.servlet.http.HttpServlet.service(HttpServlet.java:853) com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401) com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266) com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387) com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365) com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944) com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266) com.sap.engine.services.httpserver.server.Client.handle(Client.java:95) com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175) com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) java.security.AccessController.doPrivileged(Native Method) com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
    Whether it is because different Servers?
    Edited by: Cheney Cao on May 20, 2008 3:38 AM

    /****:/#

  • I create an id. on review option when i enter visa card and security code, it always gives an error msg "Invalid Secruity code". but i use this code for money withdraw from ATM and for shopping also. plz tell the solution ????

    i create an id. on review option when i enter visa card and security code, it always gives an error msg "Invalid Secruity code". but i use this code for money withdraw from ATM and for shopping also. plz tell the solution ????

    The code they are asking for is the last three digits of the number on the back of the card (you don't use this when using an ATM or presenting the card in shops).

  • WS Navigator shows error "Invalid Response Code (500)

    I have published a ECC 6.0 webservice in PI Service Registry. I use NW Dev Studio and attempt to find the published WS but I get an error in the WS Navigstor.
    Endpoints were created so I attempt to consume it in NWDS but I get the the following error:
    "Invalid Response Code: (500) WSDL could not be generated  The requested URL........""
    In somamanger I can see the WSDL and it looks fine...
    Any ideas or steps that I need to do or missed?
    Thanks
    Mikie

    Hi,
    Are you able to test the web service on the web service navigator successfully. On the soamanager you have an option for testing the web services in web service navigator.
    Regards,
    Yasar

  • Just purchased blue ray movie from store with a redemption code but will not download with out inserting disc I have a macbook air

    just purchased blue ray movie from store with a redemption code but will not download with out inserting disc I have a macbook air

    I am experiencing the same thing. I have many books that I used to read on my iPad.
    Now on iBooks in Mavericks all my books downloaded correctly apart from two which I really want to work (The Lean Startup and Communicating The User Experience).
    When I download both using the cloud icon just when it reaches 100% I get this message:
    [Insert Book Name] failed to download
    To try again, select Check for Available Downloads from the Store menu.
    When I check for available downloads it says I have already downloaded all my books.
    Anyone know how to fix this.
    I do realise that this is only v1 of iBooks so I hope Apple sorts it out soon.
    Thanks!!!

  • Cannot download WSDL from .....Invalid Response Code: (404) Not Found.

    Hi expert,
    hcb-msap59 (PI system) & hcb-msap49 (ecc system)
    When I try calling the ws navigator with this wsdl: http://hcb-msap49.res.no.enterdir.com:8016/sap/bc/srt/wsdl/sdef_ECC_DOCUMENTCRTRC1/wsdl11/ws_policy/document?sap-client=101
    it gives error :
    Cannot download WSDL from http://hcb-msap49.res.no.enterdir.com:8016/sap/bc/srt/wsdl/sdef_ECC_DOCUMENTCRTRC1/wsdl11/ws_policy/document?sap-client=101: Invalid Response Code: (404) Not Found. The request URL was:"http://hcb-msap49.res.no.enterdir.com:8016/sap/bc/srt/wsdl/sdef_ECC_DOCUMENTCRTRC1/wsdl11/ws_policy/document?sap-client=101". Check, whether the URL is correct, and the Web Service that you are requesting is up and running
    In http://hcb-msap49.res.no.enterdir.com:8016/sap/bc/webdynpro/sap/appl_soap_management?sap-language=EN and go to technical configuration, system global settings, access information j2ee server, the hostname and port is of PI system.
    Any idea why Im getting the error? If I click on http://hcb-msap49.res.no.enterdir.com:8016/sap/bc/srt/wsdl/sdef_ECC_DOCUMENTCRTRC1/wsdl11/ws_policy/document?sap-client=101 the sire is opening.
    Any idea why I cant open it from ws navigator of my PI system?
    Thanks.
    Regards,
    Thava

    Hi,
    Can you access that URL when you paste it into your browser? You don't need to configure system global settings unless you want to go to PI's navigator automatically - you can always copy & paste the link after opening the wsnavigator in PI yourself as well. If you can access the link, kindly check your network & proxy setup.
    Regards,
    Gokhan

  • After updating my MacBook Pro to yeosemite I want my old screen saver picture back. I did a full back up before the install. I found the "Settings" folder in Time machine but when I try to open it I get an error message saying "You can not open this

    After updating my MacBook Pro to yeosemite I want my old desktop picture back. I did a full back up before the install. I found the "Settings" folder in Time machine but when I try to open it I get an error message saying "You can not open this folder. It is in TimeMachine".

    Can you browse the Time Machine drive from Finder?
    If you can and you know where the picture was stored ie on your desktop you can browse through the folder structure to the picture copy it and paste it somewhere on your new install before right clicking it and 'set as desktop background'

  • Error FF753 Tax code 01 not appear in any G/L account item with FM Active

    Hi
    We have fund management configured for one of the company code, while creating billing document through VF01/VF02 we are  getting the Error FF753 Tax code 01 not appear in any G/L account item.
    This error however does not appear when posting directly from FI with the same tax code.
    I have tried to change the message control in which case i am getting a dump pointing to PSM-FM.
    Please advise.
    Regards
    Sandeep

    Hi:
              If you could please refer to the contents of  OSS Note 112609 - How are tax codes transferred to conditions ?
    "Symptom
    If a billing document is transferred to accounting the system displays error messages. Transferring tax codes from tax conditions into the pricing conditions and discounts does not function as expected.
    Other terms
    FF805, FF747, FF753, MWSKZ, MWSK1, tax code
    Reason and Prerequisites
    The tax condition in the SD pricing procedure contains incorrect reference steps, there are several tax conditions in the pricing procedure of which the tax codes overwrite each other or a program error exists.
    Solution
    In the accounting document for a billing document, the different G/L account line items are provided with a tax code. The tax code of the G/L accounts is transferred from the tax condition(s) of the billing document. How are the tax codes of the tax conditions transferred into the other conditions of a billing document ?
    Basically:
    The conditions of a billing document are read from top to bottom. As soon as an active tax (inactive = ' ') is read, the system transfers the tax code of this tax into the non-tax conditions as follows:
        1. The reference steps (From-step, To-step) are read (the reference steps are defined in the pricing procedure).
        2. The tax code is transferred into all conditions, for which
        the step number of the condition lies in the pricing procedure between "From-step" and "To-step",
        the condition is not inactive (exactly: the inactive flag is not equal to A (Condition exclusion), M (Inactive due to manual entry), or X (Incorrect)),
        the condition is not statistical (if it is no invoice list condition),
        the condition is no tax condition.
    After the transfer of the tax code the system searches for the next active tax. If further taxes are found, their tax code is again transferred according to the above procedure. If the reference steps of different taxes overlap, tax codes that have already been transferred are overwritten. To all non-tax conditions which in the pricing procedure stand after the last tax condition the tax code of the last active tax condition is transferred if they are not statistical.
    Special features:
        1. If the "From-step" of a tax condition refers to a subtotal of the pricing procedure, the tax code of the tax is not only transferred into the conditions with step number between From-step and To-step but into all non-tax conditions for which
        the step number of the condition in the pricing procedure is lower than the "To-step" of the tax condition.
        the condition is not statistical (if it is no invoice list condition).
        the condition is not a tax condition.
        2. If the "To-step" of the tax condition is smaller than the "From-step", then the system sets "To-step = From-step".
    Notes:
        1. As of Release 4.0 the tax code is no longer transferred in pricing but only when the billing document is released to accounting.
        2. If you use several taxes and tax codes and Customizing is incorrect for the release of billing documents to accounting, among others the system may display error message FF747.
        3. If there are several taxes in the pricing procedure refer to Notes 72173 and 82091 for Releases 3.0D - 3.1G. For Release 3.1H, only note 82091 is relevant.
        4. For conditions which are transferred into accounting (thus not statistical, not inactive conditions) and do not contain a tax code, the system searches for a default tax code which in Accounting Customizing can be set depending on the company code (tax code for non-taxable transactions). This applies to releases up to and including Release 4.5B. For Release 4.6, refer to Note 385127."
    Regards

Maybe you are looking for