Blue Screen of Death of multiple Windows Multipoint Servers at the same time in NUServer64.sys

Hi, we are running
Windows MultiPoint Server 2011 on 4 Dell 9010 machines and 45 Wyse E02 clients connected by 4 switches. Every week we got 2 or 3 random BSoD for all servers at the same time. Memory dump for server 2,3,4 show that the exception is from NUServer64.sys.
Please check below for the system event logs and memory dump analysis output. Any help would be appreciated!
server1:
Warning 11/17/2013 8:55:52 PM
e1cexpress 27
None
Critical 11/17/2013 8:55:48 PM
Kernel-Power 41
(63)
Error 11/17/2013 8:56:08 PM
BugCheck 1001
None
The computer has rebooted from a bugcheck. The bugcheck was: 0x0000001e (0xffffffffc0000005, 0x0000000000000000, 0x0000000000000008, 0x0000000000000000). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: 111813-19765-01.
Error 11/17/2013 8:56:03 PM
EventLog 6008
None
The previous system shutdown at 12:53:40 on 2013/11/18 was unexpected.
Error 11/17/2013 6:55:49 PM
Disk 11
None
The driver detected a controller error on \Device\Harddisk2\DR2.
Error 11/17/2013 6:55:48 PM
Disk 11
None
The driver detected a controller error on \Device\Harddisk2\DR2.
Warning 11/17/2013 3:42:08 PM
Microsoft-Windows-TerminalServices-Licensing
18 None
server2:
Warning 11/17/2013 8:55:39 PM
e1cexpress 27
None
Critical 11/17/2013 8:55:31 PM
Kernel-Power 41
(63)
Error 11/17/2013 8:55:52 PM
BugCheck 1001
None
The computer has rebooted from a bugcheck. The bugcheck was: 0x0000007e (0xffffffffc0000005, 0xfffff80002c80166, 0xfffff880023397e8, 0xfffff88002339040). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: 111813-17518-01.
Error 11/17/2013 8:55:44 PM
EventLog 6008
None
The previous system shutdown at 12:53:53 on 2013/11/18 was unexpected.
Warning 11/17/2013 7:16:07 PM
NUServer64 3
None
server3:
Warning 11/17/2013 8:55:38 PM
Microsoft-Windows-TerminalServices-Licensing
18 None
Error 11/17/2013 8:55:31 PM
BugCheck 1001
None
The computer has rebooted from a bugcheck. The bugcheck was: 0x0000004e (0x000000000000009a, 0x0000000000417c94, 0x0000000000000006, 0x0000000000000002). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: 111813-9937-01.
Warning 11/17/2013 8:55:24 PM
e1cexpress 27
None
Critical 11/17/2013 8:55:21 PM
Kernel-Power 41
(63)
Error 11/17/2013 8:55:27 PM
EventLog 6008
None
The previous system shutdown at 12:53:49 on 2013/11/18 was unexpected.
server4:
Warning 11/17/2013 8:55:33 PM
Microsoft-Windows-TerminalServices-Licensing
18 None
Warning 11/17/2013 8:55:09 PM
e1cexpress 27
None
Critical 11/17/2013 8:55:05 PM
Kernel-Power 41
(63)
Error 11/17/2013 8:55:25 PM
BugCheck 1001
None
The computer has rebooted from a bugcheck. The bugcheck was: 0x0000000a (0x0000000100000001, 0x0000000000000002, 0x0000000000000001, 0xfffff8000328abe6). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: 111813-14055-01.
Error 11/17/2013 8:55:14 PM
EventLog 6008
None
The previous system shutdown at 12:53:21 on 2013/11/18 was unexpected.
Error 11/17/2013 8:51:47 PM
NUServer64 4
None
\Device\NUServer_995D6600
<995D6600_3> Disconnect fail.
Error 11/17/2013 8:51:47 PM
NUServer64 4
None
\Device\NUServer_995D6600
<995D6600_3> Connect fail.
Warning 11/17/2013 8:51:47 PM
NUServer64 3
None
\Device\NUServer_995D6600
<995D6600_3> Connect time-out.
Warning 11/17/2013 8:50:00 PM
NUServer64 3
None
\Device\NUServer_995B9000
<995B9000_3> Hi-Perf socket active clear.
Error 11/17/2013 8:49:25 PM
NUServer64 4
None
\Device\NUServer_995D6600
<995D6600_3> Disconnect fail.
Error 11/17/2013 8:49:25 PM
NUServer64 4
None
\Device\NUServer_995D6600
<995D6600_3> Connect fail.
Warning 11/17/2013 8:49:25 PM
NUServer64 3
None
\Device\NUServer_995D6600
<995D6600_3> Connect time-out.

Memory dumps:
server1:
2: kd> !analyze -v
* Bugcheck Analysis *
KMODE_EXCEPTION_NOT_HANDLED (1e)
This is a very common bugcheck. Usually the exception address pinpoints
the driver/function that caused the problem. Always note this address
as well as the link date of the driver/image that contains this address.
Arguments:
Arg1: ffffffffc0000005, The exception code that was not handled
Arg2: 0000000000000000, The address that the exception occurred at
Arg3: 0000000000000008, Parameter 0 of the exception
Arg4: 0000000000000000, Parameter 1 of the exception
Debugging Details:
EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
FAULTING_IP:
+3031623733386137
00000000`00000000 ?? ???
EXCEPTION_PARAMETER1: 0000000000000008
EXCEPTION_PARAMETER2: 0000000000000000
WRITE_ADDRESS: 0000000000000000
ERROR_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
BUGCHECK_STR: 0x1E_c0000005
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: System
CURRENT_IRQL: 0
TRAP_FRAME: fffff8800c744860 -- (.trap 0xfffff8800c744860)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=0000000000000000 rbx=0000000000000000 rcx=0000000000000000
rdx=0000000000000000 rsi=0000000000000000 rdi=0000000000000000
rip=0000000000000000 rsp=fffff8800c7449f0 rbp=0000000000000000
r8=0000000000000000 r9=0000000000000f44 r10=fffff80003602000
r11=0000000000000358 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0 nv up ei ng nz na pe nc
00000000`00000000 ?? ???
Resetting default scope
LAST_CONTROL_TRANSFER: from fffff800036c2738 to fffff80003677bc0
STACK_TEXT:
fffff880`0c743fd8 fffff800`036c2738 : 00000000`0000001e ffffffff`c0000005 00000000`00000000 00000000`00000008 : nt!KeBugCheckEx
fffff880`0c743fe0 fffff800`03677242 : fffff880`0c7447b8 00000000`00000030 fffff880`0c744860 00000000`00000000 : nt! ?? ::FNODOBFM::`string'+0x487ed
fffff880`0c744680 fffff800`03675dba : 00000000`00000008 00000000`00000000 00000009`00000000 00000000`00000030 : nt!KiExceptionDispatch+0xc2
fffff880`0c744860 00000000`00000000 : 00000000`00000030 ffffffff`fffe7960 00000000`00000000 00000000`00000000 : nt!KiPageFault+0x23a
STACK_COMMAND: kb
FOLLOWUP_IP:
nt! ?? ::FNODOBFM::`string'+487ed
fffff800`036c2738 cc int 3
SYMBOL_STACK_INDEX: 1
SYMBOL_NAME: nt! ?? ::FNODOBFM::`string'+487ed
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: nt
IMAGE_NAME: ntkrnlmp.exe
DEBUG_FLR_IMAGE_TIMESTAMP: 521ea035
FAILURE_BUCKET_ID: X64_0x1E_c0000005_nt!_??_::FNODOBFM::_string_+487ed
BUCKET_ID: X64_0x1E_c0000005_nt!_??_::FNODOBFM::_string_+487ed
Followup: MachineOwner
server2:
0: kd> !analyze -v
* Bugcheck Analysis *
SYSTEM_THREAD_EXCEPTION_NOT_HANDLED (7e)
This is a very common bugcheck. Usually the exception address pinpoints
the driver/function that caused the problem. Always note this address
as well as the link date of the driver/image that contains this address.
Arguments:
Arg1: ffffffffc0000005, The exception code that was not handled
Arg2: fffff80002c80166, The address that the exception occurred at
Arg3: fffff880023397e8, Exception Record Address
Arg4: fffff88002339040, Context Record Address
Debugging Details:
EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
FAULTING_IP:
nt!KeSetEvent+16
fffff800`02c80166 f6037f test byte ptr [rbx],7Fh
EXCEPTION_RECORD: fffff880023397e8 -- (.exr 0xfffff880023397e8)
ExceptionAddress: fffff80002c80166 (nt!KeSetEvent+0x0000000000000016)
ExceptionCode: c0000005 (Access violation)
ExceptionFlags: 00000000
NumberParameters: 2
Parameter[0]: 0000000000000000
Parameter[1]: 000000010f7f0a50
Attempt to read from address 000000010f7f0a50
CONTEXT: fffff88002339040 -- (.cxr 0xfffff88002339040)
rax=0000000000000000 rbx=000000010f7f0a50 rcx=0000000000000001
rdx=0000000000000000 rsi=fffffa800f7ec050 rdi=fffffa800f7ec1a0
rip=fffff80002c80166 rsp=fffff88002339a20 rbp=000000010f7f0a50
r8=0000000000000000 r9=0000000000000150 r10=fffff80002c06000
r11=fffff88002339a30 r12=0000000000000000 r13=fffffa800de82220
r14=fffffa800f7f0ae0 r15=0000000000000002
iopl=0 nv up ei ng nz na pe nc
cs=0010 ss=0000 ds=002b es=002b fs=0053 gs=002b efl=00010282
nt!KeSetEvent+0x16:
fffff800`02c80166 f6037f test byte ptr [rbx],7Fh ds:002b:00000001`0f7f0a50=??
Resetting default scope
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: System
CURRENT_IRQL: 0
ERROR_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
EXCEPTION_PARAMETER1: 0000000000000000
EXCEPTION_PARAMETER2: 000000010f7f0a50
READ_ADDRESS: 000000010f7f0a50
FOLLOWUP_IP:
NUServer64+65f1
fffff880`0ab8c5f1 488b6c2448 mov rbp,qword ptr [rsp+48h]
BUGCHECK_STR: 0x7E
LAST_CONTROL_TRANSFER: from fffff8800ab8c5f1 to fffff80002c80166
STACK_TEXT:
fffff880`02339a20 fffff880`0ab8c5f1 : 00000000`000003f0 00000001`00000000 fffffa80`0f7ec000 00000000`00000500 : nt!KeSetEvent+0x16
fffff880`02339a90 fffff880`0ab8c8aa : fffffa80`0f7ec1a0 fffffa80`0f7eeb0c fffffa80`0f7ee2c8 00000000`00000002 : NUServer64+0x65f1
fffff880`02339ad0 fffff800`02f721d3 : fffffa80`0f7f0ae0 fffffa80`0f7ec260 fffffa80`0f7ec050 fffffa80`0c72e040 : NUServer64+0x68aa
fffff880`02339b40 fffff800`02c85261 : fffff800`02e21200 fffff800`02f72101 fffffa80`0c72e000 00000000`00000000 : nt!IopProcessWorkItem+0x23
fffff880`02339b70 fffff800`02f182ea : 501a7d4d`a14dcd79 fffffa80`0c72e040 00000000`00000080 fffffa80`0c70b6f0 : nt!ExpWorkerThread+0x111
fffff880`02339c00 fffff800`02c6c8e6 : fffff880`01f42180 fffffa80`0c72e040 fffff880`01f4d0c0 9ae0ec34`00b81aae : nt!PspSystemThreadStartup+0x5a
fffff880`02339c40 00000000`00000000 : fffff880`0233a000 fffff880`02334000 fffff880`02339370 00000000`00000000 : nt!KiStartSystemThread+0x16
SYMBOL_STACK_INDEX: 1
SYMBOL_NAME: NUServer64+65f1
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: NUServer64
IMAGE_NAME: NUServer64.sys
DEBUG_FLR_IMAGE_TIMESTAMP: 4f66a064
STACK_COMMAND: .cxr 0xfffff88002339040 ; kb
FAILURE_BUCKET_ID: X64_0x7E_NUServer64+65f1
BUCKET_ID: X64_0x7E_NUServer64+65f1
Followup: MachineOwner
server3:
0: kd> !analyze -v
* Bugcheck Analysis *
PFN_LIST_CORRUPT (4e)
Typically caused by drivers passing bad memory descriptor lists (ie: calling
MmUnlockPages twice with the same list, etc). If a kernel debugger is
available get the stack trace.
Arguments:
Arg1: 000000000000009a,
Arg2: 0000000000417c94
Arg3: 0000000000000006
Arg4: 0000000000000002
Debugging Details:
BUGCHECK_STR: 0x4E_9a
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: System
CURRENT_IRQL: 0
LAST_CONTROL_TRANSFER: from fffff80002d629ef to fffff80002cd3bc0
STACK_TEXT:
fffff880`14417968 fffff800`02d629ef : 00000000`0000004e 00000000`0000009a 00000000`00417c94 00000000`00000006 : nt!KeBugCheckEx
fffff880`14417970 fffff800`02e0403b : fffff880`14417a08 fffffa80`10cd1b88 fffff880`144179e0 00000000`000005a0 : nt!MiBadRefCount+0x4f
fffff880`144179b0 fffff800`02e078a7 : fffffa80`12894000 00000000`00000000 fffff6fb`7ea004a0 fffff800`00000001 : nt!MiFreePoolPages+0xa8b
fffff880`14417ac0 fffff880`0ad8d07a : 00000000`00000003 fffffa80`0f4471a0 fffffa80`36747345 fffffa80`00000000 : nt!ExFreePoolWithTag+0x7c7
fffff880`14417b70 fffff800`02f702ea : fffffa80`10cd1a80 00000000`00000080 fffffa80`0c70a740 003f005c`005c0000 : NUServer64+0x1707a
fffff880`14417c00 fffff800`02cc48e6 : fffff800`02e4ee80 fffffa80`10cd1a80 fffff800`02e5ccc0 00310026`00330023 : nt!PspSystemThreadStartup+0x5a
fffff880`14417c40 00000000`00000000 : fffff880`14418000 fffff880`14412000 fffff880`144174b0 00000000`00000000 : nt!KiStartSystemThread+0x16
STACK_COMMAND: kb
FOLLOWUP_IP:
NUServer64+1707a
fffff880`0ad8d07a 440f20c0 mov rax,cr8
SYMBOL_STACK_INDEX: 4
SYMBOL_NAME: NUServer64+1707a
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: NUServer64
IMAGE_NAME: NUServer64.sys
DEBUG_FLR_IMAGE_TIMESTAMP: 4f66a064
FAILURE_BUCKET_ID: X64_0x4E_9a_NUServer64+1707a
BUCKET_ID: X64_0x4E_9a_NUServer64+1707a
Followup: MachineOwner

Similar Messages

When i type in my correct password on the login screen and press enter it just goes to a blue screen for a few seconds then goes back to the same login screen again, please i need help?

When i type in my correct password on the login screen and press enter it just goes to a blue screen for a few seconds then goes back to the same login screen again, please i need help?

You can take some of the steps here, #4, #5 or even trying a #18
Step by Step to fix your Mac
but I suspect your going to first have to create a data recovery drive
Create a data recovery, undelete boot drive
to get your data off the machine,
then do a #20 to eliminate the bad sectors as that's why your getting the "pinwheel" it's getting a delay reading from the drive, right when your trying to log in too, what a bad spot for it to happen.
Step by Step to fix your Mac

New Camera RAW in Photoshop CC 2014 won't open multiple Panasonic RAW (.rw2) at the same time from Windows Explorer.

New Camera RAW in Photoshop CC 2014 won't open multiple Panasonic RAW (.rw2) at the same time from Windows Explorer. If I select 2 raw files and click "Open" Camera RAW will only open 1 raw, then when I click "Done" it will close and open the second, sequentially. Previous Photoshop CC and RAW worked fine, it would open mulitple RAW at the same time. How do I fix this?

If it worked for you that way previously there isn't much to comment about. I just tried opening multiple images from Windows Explorer with Photoshop CS6 and Camera Raw 8.6, and the first image would open and when I clicked cancel then the second image would open. But if I wanted multiple images opened in Camera Raw to work on them simultaneously it was necessary for me to open them from Bridge. I just did it as an experiment because I normally use Lightroom. Anyway, IF it was a feature at one time to work as you described, it doesn't seem to be that way now.

In windows how do we install and activite multiple versions of tuxedo at the same time ?

Hi All,
In windows how do we install and activate multiple versions of tuxedo at the same time ?
Advance wishes

You can run different versions of Tuxedo on the same server, as long as they are installed in different directories.
See PeopleTools 8.53 installation manual Task 3-1: Installing Oracle Tuxedo
You can install Oracle Tuxedo once for each release on a machine, regardless of the number of PeopleSoft
applications or databases the server supports. For example, if you are a PeopleSoft 9.1 customer and have
Oracle Tuxedo 6.5 installed, you may install Oracle Tuxedo 6.5 and Oracle Tuxedo 11gR1 on the same
machine in separate directories. For example:
On Windows, you may install into C:\oracle\tuxedo11gR1_VS2010 and C:\tux65.
On UNIX, you may install into /home/oracle/tuxedo11gR1 and /prod/tuxedo/6.5.
E-TUX: Can Multiple Versions of Tuxedo Coexist on One Physical UNIX or Linux Server? (Doc ID 607828.1)

Running PSConfig on multiple servers at the same time

Hi - we are updating an 8 server farm with a CU and in order to reduce downtime I am wondering whether it is supported/risky to run PSConfig on multiple SharePoint servers at the same time
I plan to run the first one by itself - then after that set 7 off at the same time
In the past I have always run them serially just to be cautious but there is pressure to reduce downtime so I want to know if there is any risk in running them simultaneously
Thanks!
J

In general its not a good idea. Running PSConfig will try to establish a lock on the configuration database. Doing that from two servers at the same time may cause the update to fail.
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem.

"you can not use multiple instance of Program at the same time"

Hello @ all,
I have a Problem, after the installing from Acrobat Testversion and acrobat reader in version in "all Combination" 8 an 9.
I get this misstake information "you can not use multiple instance of Program at the same time" if I want open more then 1 .pdf.
If I have no pdf open, but acrobat/reader so i can´t open with the same Misstake.
I have deinstalled and installed, Allways I bekame the same information. I tryed all things to clean and know i don`t know forward.
Important: by Drag an Drop in the Acrobat Reader it is going, but by direct click on the pdf i get mistake.
Maybe, you know what I can do!
Thanks for help!

Installation of both Acrobat and Reader in the same Windows machine is not advisable. If I were you, I would remove both completely and then reinstall the one you want to keep.

JVM 1.3.1_06 Solaris 8 (sparc) multiple jvm's crash at the same time

Hi All,
I had multiple jvms crash all at the same time today morning, i was wondering if anyone had any similar issues with 1.3.1_06:
Only a few jvms left an hs_errpid.log: here is the one with the most info:
An unexpected exception has been detected in native code outside the VM.
Unexpected Signal : 10 occurred at PC=0xff02f8f8
Function name=VerifyClassCodes
Library=/www/gmgwh/weblogic/jdk/j2sdk1_3_1_06/jre/lib/sparc/libjava.so
Current Java thread:
at java.lang.Shutdown.halt(Native Method)
at java.lang.Shutdown.exit(Shutdown.java:209)
at java.lang.Terminator$1.handle(Terminator.java:33)
at sun.misc.Signal$1.run(Signal.java:193)
at java.lang.Thread.run(Thread.java:479)
Dynamic libraries:
0x10000 /www/gmgwh/weblogic/jdk/j2sdk1_3_1_06/jre/bin/../bin/sparc/native_threads/java
0xff350000 /usr/lib/libthread.so.1
0xff340000 /usr/lib/libdl.so.1
0xff200000 /usr/lib/libc.so.1
0xff330000 /usr/platform/SUNW,Ultra-Enterprise/lib/libc_psr.so.1
0xfe400000 /www/gmgwh/weblogic/jdk/j2sdk1_3_1_06/jre/lib/sparc/hotspot/libjvm.so
0xff2d0000 /usr/lib/libCrun.so.1
0xff1e0000 /usr/lib/libsocket.so.1
0xff100000 /usr/lib/libnsl.so.1
0xff0d0000 /usr/lib/libm.so.1
0xff1c0000 /usr/lib/libmp.so.2
0xff090000 /www/gmgwh/weblogic/jdk/j2sdk1_3_1_06/jre/lib/sparc/native_threads/libhpi.so
0xff060000 /www/gmgwh/weblogic/jdk/j2sdk1_3_1_06/jre/lib/sparc/libverify.so
0xff020000 /www/gmgwh/weblogic/jdk/j2sdk1_3_1_06/jre/lib/sparc/libjava.so
0xfe7d0000 /www/gmgwh/weblogic/jdk/j2sdk1_3_1_06/jre/lib/sparc/libzip.so
0xfe3e0000 /usr/lib/locale/en_US.ISO8859-1/en_US.ISO8859-1.so.2
0xfe390000 /www/gmgwh/weblogic/jdk/j2sdk1_3_1_06/jre/lib/sparc/libnet.so
0xfe230000 /usr/lib/nss_files.so.1
0xfe160000 /www/gmgwh/weblogic/6.1/sp4/lib/solaris/libmuxer.so
0xfd0e0000 /usr/ucblib/libucb.so.1
0xfd090000 /usr/lib/libresolv.so.2
0xfd050000 /usr/lib/libelf.so.1
0xfafd0000 /app/oracle/product/8.1.7.4/lib/libocijdbc8.so
0xe1800000 /app/oracle/product/8.1.7.4/lib/libclntsh.so.8.0
0xfafb0000 /app/oracle/product/8.1.7.4/lib/libwtc8.so
0xfaf90000 /usr/lib/libsched.so.1
0xfaee0000 /usr/lib/libaio.so.1
Local Time = Wed Jan 19 09:09:31 2005
Elapsed Time = 22367
# The exception above was detected in native code outside the VM
# Java VM: Java HotSpot(TM) Client VM (1.3.1_06-b01 mixed mode)
#

hi there
i would direct my efforts to search for the culprit on who generated the signal (either a INT, TERM or HUP). The crash occurred is just but another side-effect. The VM received a shutdown signal and shld exit. Just that while exiting, it crashed.
There is this bug
http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=4904881
Which is pretty rare. I am not sure if you are encountering this bug but if u have a core, a pstack of the core should show > 2 threads with doing the signal shutdown.

For the past month, I've had an echo of my voice while I'm talking on my phone. It's very annoying and sounds like multiple people are speaking at the same time and it's only me. Anyone know what's wrong?

For the past month, I've had an echo of my voice while I'm talking on my phone. It's very annoying and sounds like multiple people are speaking at the same time and it's only me. Anyone know what's wrong?

For the past month, I've had an echo of my voice while I'm talking on my phone. It's very annoying and sounds like multiple people are speaking at the same time and it's only me. Anyone know what's wrong?

Dispatch center - Select multiple tasks for scheduling at the same time

Hi!
I need a consultation regarding Dispatch center. Is there a functionality to select multiple tasks for scheduling at the same time for one resource?
Please, guys, this is urgent.
Jan

You can schedule a single task or multiple tasks automatically directly from the
dispatch center. The scheduling criteria applied come from Advanced Scheduler.
Make Sure, you have the advanced scheduler. With out Advanced Scheduler and by just using Advice, you can only assign one task at a time.
HTH
ps: for more information, refer Field Service User Guide, "Scheduling Tasks"

Are there any apps for having seperate volume controls for each app if multiple apps are playing at the same time?

Are there any apps for having seperate volume controls for each app if multiple apps are playing at the same time?

I don't think you can do that the volume is universal, but maybe turn down the volumes in the app settings?

K9N2 SLI Platinum Blue Screen of Death when installing Windows XP

My hardware includes:
•   MSI K9N2 SLI Platinum Motherboard
•   Corsair XMS2 TWIN2X4096-6400C5
•   GeForce 9800 GT 512MB GDDR3
•   AMD Phenom X4 9850 Quad Core Processor, Black Edition 2.5GHz
4MB Cache 2000MHz [4000 MT/s] FSB
•   Thermaltake Ruby Orb Aluminum Core CPU Cooler
•   UltraX3 850 Watt ATX Modular Power Supply
•   [1] Western Digital 200MB7200 ATA133 [Not connected yet]
•   [1] Maxtor 80MB ATA133 Drive [Not connected yet]
•   [1] Western Digital 500GB 7200RPM 16MB SATA II HARD DRIVE
•   [2] Seagate 7200.11 ST3500320AS 500GB SATA Hard Drives With 32 MB Cache
[Not connected yet]
•   LG DVD-RW
•   Toshiba DVD-ROM [Not connected yet]
•   AMI Bios v02.61
•   Antec Full Tower case
After partitioning my drive with Fdisk I tried to install Win Xp. My plan was to format the drive with XP. XP starts up and runs through the initial system check then when it prepares to install I get the blue screen that says [my words] "Windows has shut down to prevent damage to your system. If drivers are mentioned try disabling them in the BIOS or get the latest bios update from the equipment manufacturer..." The error is:
Stop 0x0000007E on the next line
pci.sys - address f7480BFbase at f7487000 Datestamp 3b7d855c
Just never had these problems setting up a system and soon I will be able to say it took me 2 years to get this running. Hope someone can help. Thanks

Use XP Installation disk with SP2 or SP3 included to fix the BSOD.
Simple your XP installation disk is outdated and cause troubles with latest hardware.

Multiclips and multiple audio tracks playing at the same time

I've only just taken delivery of my first ever mac (only ever used PC) with FCP, and I'm loving it already! Done lots of reading and viewing of video etc etc, and it's not as daunting as I thought it might be. I have one question the books don't seem to answer, and I can only find one reference to this on this site, with no definitive response. FCP5 probably doesn't work this way, but just in case someone knows different......
I film and edit motorsport (karting) programmes for television in the UK, using multiple cameras. I usually lay all the video and audio tracks on the timeline, (synched) lock the audio for each (as it is engine noise, and I want it playing without abrupt changes at cuts as each kart passes each camera, whether in shot or not) then cut the video tracks and delete those video segments not required.
The most exciting aspect of FCP5 for me is the multiclip editing facility, which I have found very easy to learn and is going to save me hours of work! However, I want to know if there is a way of having each audio track from each camera used in the multiclip laid down on the timeline when you import the multiclip to the timeline from the viewer, in order that I can play each audio track from each of the cameras at the same time.
I know how to cut from angle to angle, leaving the audio from the selected angle as the one audio track playing, but I want all of the tracks to appear in the timeline and play at the same time. I know there's a bit of a workaround by locking the video and importing each audio track from each clip independently, but if you do have to re-synch one of the multiclips, this means the audio is not then synched with the original clip, which will have had an in point set before being imported in as part of a multiclip.
I can understand why you might want to keep audio from one camera only playing over the whole multiclip, or to switch between audio from each, but in my case I prefer all audio to play at the same time. The workaround is still do-able for me as I'm only talking about engine notes, which if they are a few frames out is not very noticeable at all, but I would like to know if I'm right in thinking I cannot do it the way I would like to?
Wish I'd used FCP from the start, but glad I've got it now.....especially with the 30 inch screen! It's 4.40am, been going over 19 hours straight and I'm still making comments like...."WOW, that's brilliant"...every half hour!
G5 Mac OS X (10.4.3) Quad, 8gb ram, 2 x G-Media GRaid 500gb Raids, 30 + 20 inch Cinema screens

...

How can I save multiple tabs to open at the same time?

Hi,
I have a set of websites that I need to access regularly and I'd like to be able to open all the tabs in a window at the same time rather than clicking on each one individually. I know this was possible in previous safari versions but I can't figure out how to do it in Yosemite (v8).
Can someone walk me through how to do this please? I've googled this but haven't been able to find an answer for this latest version of safari.
Thanks!

Try one of these extensions for multiple cookie sessions.
Multifox: 
http://br.mozdev.org/multifox/ 
Cookie Swap extension: 
https://addons.mozilla.org/firefox/3255/ 
Cookie Pie extension: 
http://www.nektra.com/oss/firefox/extensions/cookiepie/

Can 2 matrix windows be open at the same time, for different parts?

I played a midi part freely, and then overdubbed a second part on a different audio instrument "in unison" (there is a joke here, I know), but some of the note attacks were slightly off.
I wanted to open the matrix windows for both parts to align the notes. But I could open only one window at a time. Is there a way to open both matrix windows at the same time so you can look at the two parts side by side?
Thanks for any advice,
Jim

yes - but in order for it to work u should not enable the link button - the pink one in the upper left corder of the matrix...

How to select multiple substring in JTextarea at the same time?

I want to select multiple substring in a jtextarea at the same time by select(start,end) method, turns out only the last substring is highlighted, how to implement my goal?

jamesybaby wrote:
What you got so far? A SCCEE would be nice?my aim is to search key words in jtextarea and highlight all matched result.
package frame;
import javax.swing.*;
import java.awt.*;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import java.util.regex.Matcher;
import java.util.regex.Pattern;
public class FrmSelect extends JFrame {
    public FrmSelect() throws HeadlessException {
        setSize(800, 600);
        final JTextField tfKey = new JTextField();
        tfKey.setPreferredSize(new Dimension(200, 20));
        final JTextArea taContent = new JTextArea();
        JScrollPane jsp = new JScrollPane(taContent);
        tfKey.addActionListener(new ActionListener() {
            public void actionPerformed(ActionEvent e) {
                String key = tfKey.getText();
                String content = taContent.getText();
                String[] splited = content.split(key);
                Pattern ptn = Pattern.compile(key, Pattern.CASE_INSENSITIVE + Pattern.MULTILINE);
                Matcher matcher = ptn.matcher(content);
                taContent.requestFocusInWindow();
                while (matcher.find()) {
                    int start = matcher.start();
                    int end = matcher.end();
                    taContent.select(start, end);
        add(tfKey,BorderLayout.SOUTH);
        add(jsp,BorderLayout.CENTER);
        setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
        setVisible(true);
    public static void main(String[] args) {
         new FrmSelect();
}please copy below into the jtextarea and type key 'prop' in the jtextfield, press return.
prop1adsfasfd
prop2adsfasdfadsf
prop3asdfasdfasdf

Blue Screen of Death of multiple Windows Multipoint Servers at the same time in NUServer64.sys

Similar Messages

Maybe you are looking for