Blue screen with large text lower left

I have a Z935 ultrabook purchased last year with Win 8 OS. I was doing something, I can't remember what, when I got the blue screen. In the lower left there was the date and time in large type (3/8 -1/2 inch). Below this was the 5-bar symbol of a wireless connection indicator.
In the lower right there was the symbol which, normally, clicked on, would bring up the dialogue Restart, Shut Down, Log Off, or Lock. Nothing happened, here, however.
All I could do was to shut down using the physical on/off button. I turned it back on - same thing - same blue screen. I did this several times. Nothing else worked, no key did anything, no Ctrl-Alt-Del.
I finally read about using the F12 key on turning back on, and I received a page with the option to Recover, or something like that, and oher options, i chose Recover, and a screen came up with several options.The first option was Continue normally, and there were options to Restore, Reset, or something like that. I just chose Continue Normally, and everything came up as it was supposed to, and all is OK now.
Does anyone know what might have caused this screen, or has anyone received one like it - with the time, date, wireless indicator, etc.?
Thanks very much.
Solved!
Go to Solution.

Many, many reasons for BSOD's, Bob. Hopefully, there won't be a next time. However, if a freeze of any kind, BSOD or otherwise, happens again, reset the system by holding DOWN the power button for 10 seconds or until all the indicator lights go out, fan stops and you're sure the computer is off. Turn back on and everything should be back to normal.
C.B.
Toshiba Sat. C75D-B7260 Win 8.1 64 Bit--Toshiba Sat. L775D-S7132 Win 7 HP SP1 64 Bit and Win 10 PRO Technical Preview--Toshiba Sat. L305-S5921 Win Vista SP2 32 Bit

Similar Messages

I have an IPod 2nd generation I bought from a pawn shop. It worked for a day but now when I try to charge it, it keeps switching back and forth from the large full screen icon of a low battery and a lighting bolt below to the blue screen with the apple s

I have an IPod 2nd generation I bought from a pawn shop. It worked for a day but now when I try to charge it, it keeps switching back and forth from the large full screen icon of a low battery and a lighting bolt below to the blue screen with the apple symbol in the middle. I had it on charge all night but still dead.

Try here.
iPod touch: Hardware troubleshooting
You may have a hardware problem.

Blue Screen with Text re IPOD size not being valid

Now everytime I reboot, I get a blue screen full of text about the IPOD size not being valid, and I have to hit the reset button to get out of the loop.
THEN, when I try to just wipe everything off the IPOD and start over/Restore, I get a message that says IPOD manager internal error.

With the internal memory error message stopping Update, I went online to see if I could manually download the latest update...or any update. Even a previous version.
But to do that I have to go back to Itunes 7...The only reason I don't like version 7 is that my Ipod contents disappear from the Itunes source window when the Ipod is not connected to the computer.
Anyone know of a more reliable mp3 player ?
Thanks for letting me ramble.
Chip

My macbook13in has a blue screen with error code 10813

my macbook 13in has a blue screen with error code 10813

Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Also see:
Reinstall OS X Without Erasing the Drive
OS X Yosemite- Reinstall OS X
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless.

Stuck on blue screen with clouds rainbow, floated ...

As it says.
When I start Skype, it goes straight to a blue screen with blue clouds and a green rainbow at the bottom. I get no prompt to login. I have followed various guides, such as renaming login to login1, deleting login, restarting the computer, uninstalling then installed skype (which gets me an error code 2734 I think), uninstalled and installed Internet Explorer. I have run windows update and everything is up to date. I also followed the advise in the floated topic, and even after using Command Prompt (which was not in Accessories folder, had to search cmd to find it) and restarting, the 'click this button' does not work.
Skype was working fine on Sunday, and now it is broken. The only thing I have done in the meantime is run a repair tool for Windows Media Player as a game I installed required it to play in game music.
EDIT: I use Windows 7.
Solved!
Go to Solution.

Scripting in Internet Explorer might be disabled by an Antivirus software. What Antivirus software is installed on your computer?
Meanwhile you can try the “legacylogin” workaround, which should enable login to Skype using the old legacy login window. However, you will not be able to login using Microsoft account (email address).
Quit Skype. Make sure that you don’t see any Skype.exe processes in Windows Task Manager. If necessary, then stop these processes.
Open this folder on your computer:
C:\Program Files (x86)\Skype\Phone\
You should see there the Skype application file (Skype.exe). Right click on the Skype.exe file and select: Send to – Desktop (create shortcut). Right click on the newly created shortcut and select Properties and then the Shortcut tab. In the Target field you will see now:
"C:\Program Files (x86)\Skype\Phone\Skype.exe"
Click with your mouse on the text in the Target field and move your curser one space after the last quotation sign and add the text /legacylogin. The text in the Target field should now read:
"C:\Program Files (x86)\Skype\Phone\Skype.exe" /legacylogin
Click OK to save the changes. Start Skype using this new shortcut. Can you now login to Skype?

Macbook Pro 10.6.8 won't shut down. Blue screen with spinning wheel.

it's an 15 inch macbook pro. since I bought this computer was working fine about last year. Somehow, start of this year, the problem begins. Everytime when i opened microsoft word 2011 on mac or Photoshop cs5, and quit the software as normaly. When i try to shut down the blue screen with spinning wheel apears. this spining wheel is endless. But funny thing is that after use other software such as games, web browser (safari) etc. and quit them. when i shut down there was not a problem. only word 2011 for mac and adobe photoshop cs5. Any solutions?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
Step 1
Select "system.log" from the file list. Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Post the messages logged during the time something abnormal was happening. That time might be before or after the boot.
For example, if the problem is a slow startup taking three minutes, post the messages timestamped within three minutes after the boot time, not before. If the problem is a system crash or freeze, post the messages from before the boot time, when the system was about to crash or was failing to shut down. In either case, please include the BOOT_TIME message at the beginning or the end of the log extract.
Post the log text, please, not a screenshot. If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
If the log doesn't go back far enough in time, scroll down in the Console file list to /private/var/log/system.log.0.bz2. Search that archived log, and if necessary the older ones below it, for the same information.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.
Step 2
Do the same with kernel.log.
Step 3
Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post shutdownStall or hang logs — they're very long and not helpful.

Blue screen with rotating gear

I have installed a new hard drive in a mac mini PPC. When I try to install OS X from the original disk, I get as far as the language selection screen and then it goes to a blue screen with a rotating gear. I have left it there for an hour and nothing changes. I did make sure to format the drive before I tried to install. I don't know what to try but I am very stuck at this point.

Matthew:
Check your formatting against these directions:
Formatting, Partitioning Erasing a Hard Disk Drive
• With computer shut down insert install disk in optical drive.
• Hit Power button and immediately after chime hold down the "C" key.
• Select language
• Go to the Utilities menu (Tiger) Installer menu (Panther & earlier) and launch Disk Utility.
• Select your HDD (manufacturer ID) in left side bar.
• Select Partition tab in main panel. (You are about to create a single partition volume.)
• Select number of partition in pull-down menu above Volume diagram.
(Note 1: One partition is normally preferable for an internal HDD.)
• Type in name in Name field (usually Macintosh HD)
• Select Volume Format as Mac OS Extended (Journaled)
• Click Partition button at bottom of panel.
• Select Erase tab
• Select the sub-volume (indented) under Manufacturer ID (usually Macintosh HD).
• Check to be sure your Volume Name and Volume Format are correct.
• Click Erase button
• Quit Disk Utility.
Open installer and begin installation process.
cornelius

MBP stuck on blue screen with spinning loading icon during update to 10.6.7

I have a mid-2010 model Macbook Pro 13inch, 2.4ghz/4gb ram
I've been scouring apple forums and even reddit and my googlefu has yielded no such luck. Basically, System Update has been yelling at me for a few weeks now to upgrade to 10.6.7 (among other updates) and I've been putting it off and putting it off, with the intention of eventually doing the update, but I just kept forgetting.
Finally tonight, I remembered, and decided to open System Update, and do all the recommended updates that it was asking me to do. So, without thinking twice (I've never had an issue with this before) I clicked download and install, and away it went, downloading like usual and then rebooting.
Thing is, it's been stuck at this blue screen with the spinning spiral coming up on 5 hours now. I know the 10.6.7 update was close to 400mb, but I've never had anything like this happen before.
My hard drive had more than 150 gigs free on it last time I checked, and it's been running absolutely flawless up until now.
Has anyone else experienced this? Is it supposed to take so long? What do I do?
I've been contemplating shutting it down by holding the power button, but since it's a OS update I'm afraid the drive will be corrupted, and unfortunately I don't have a current backup of the drive either... Help

I left my macbook plugged in over night, we're now going on 14 hours of this blue screen with the spinning wheel/symbol. Anyone?

My MBP 15 inch can't switch off (freeze at blue screen with spinning wheel)

Whenever i try to "shut down" my MBP, it will freeze at the blue screen with the spinning wheel (that keeps spinning like 'eternally')! Any idea how to solve the problem?
I tried booting from the installation disk and repairing disk with "disk utility" but to no avail. Have also tried repairing disk permissions... Any idea how else should i tackle this problem?
Currently i can only switch off my MBP by holding the power button (forcing it to shut down)...
Please help Thanks!

Launch the Console application by entering the first few letters of its name into a Spotlight search, and select "system.log" from the file list. Enter "BOOT_TIME" (without the quotes) in the search box. Note the times of the log messages referring to boot times. Now clear the search box and scroll back in the log to the time of the most recent boot when you had the problem. Look for error messages in the minutes before that time, and post them here -- the text, please, not a screenshot. Edit out excessive repeats, if any. Do the same with kernel.log.
If the logs don't go back far enough in time, scroll down in the Console file list to /private/var/log/system.log.0.bz2 and /private/var/log/kernel.log.0.bz2. Search those archived logs, and if necessary the older ones below them, for the same information.
Also in Console, look under System Diagnostic Reports for crash or panic logs, and post the most recent one, if any. For privacy’s sake, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please do not post shutdownStall or hang logs -- they're very long and not helpful.

I have an iMac from 2008. When I start I get gray screen with apple and turning gear. Next blue screen. Then light blue screen with turning gear. Back to blue screen. Now just back and forth blue to light blur

I have an iMac from 2008. When I start I get gray screen with apple and turning gear. Next blue screen. Then light blue screen with turning gear. Back to blue screen. Now just back and forth blue to light blur

Reinstall OS X:
Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.
Reinstalling Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion and click on the Continue button.
Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer.

What does it mean when you computer crashes and when you turn it back on it shows you a blank blue screen with a little folder and a question mark in the middle?

What does it mean when you computer crashes and when you turn it back on it shows you a blank blue screen with a little folder and a question mark in the middle? It's a old imac from 1997.

I don't have original discs that it came with.
Then you still can use the second option with the keyboard combo I posted, called "resetting the PRAM."
Also when you way hold the c key down do you mean turn computer off and turn back on holding the c key?
Yes, or you can simply restart. As you don't have the CDs, this isn't on the plate any more.
The internal backup battery is not expensive and, in most iMacs is user-replacable. If yours has a tray-loading optical drive like this one:
it takes a major teardown to replace the internal battery. If this is the case, you'd be better off to leave the computer plugged in all the time; that eliminates the main reason for having a working battery.
If it has a slot-loading optical drive like this one:
things are much easier. The battery is visible through the RAM access door on the bottom of the computer case. The manual:
http://manuals.info.apple.com/en_US/iMacG3_2000UserManual.PDF
has sketches of how to access the RAM and therefore the backup battery. Unfortunately, the pdf on the manual goes up sideways on-screen and the RAM instructions are pretty deep into the manual. It's probably easier to scroll (for a while) to the section on adding RAM and print the applicable pages.
When you work on the battery, some sort of non-conductive pliers or large tweezer or forceps help unless you have tiny fingers. Make sure to note the polarity of the old battery and install the new one in the same orientation.
The battery itself is readily available. If price is no oblect, you can get it for a small rasom from Radio Shack Store ("Tandy" outside the US) as part number 23-026.
Online, they are dirt-cheap even after adding shipping. I buy backup batteries form this outfit:
3.6v Newer Technology Lithium 1/2 AA PRAM Computer Clock Battery

Blue Screen with spinning coloured wheel

My girlfriend borrowed her iMac G4 Flat Panel to a friend and now it won't load the OS properly.
The following happens:
1. The grey screen appears (with the smiling MAC in the middle)
2. The Mac OS X start-up screen appears with the progress bar
3. Then a blue screen, with a spinning coloured wheel in the top left corner
4. After a couple of minutes, a few windows pop open (probably whatever the person accessed last)
5. The windows disappear and all you're left with is a blue screen and spinning coloured wheel in the top left corner
6. The MAC then remains in this state indefinitely
Unfortunately, I’m unable to tell what version of the MAC OS is running.
We cannot find the OS disk either.
I will greatly appreciate any assistance anybody is able to provide.
Thanks

Brannas...
Empty,Blue Screen.
http://docs.info.apple.com/article.html?artnum=106464
1. Start up in Safe Mode.(shift key at startup)
a. Drag the Fonts folder from the Mac OS 9 System Folder (not the Mac OS X System folder) to the desktop.
b. Drag the Fonts folder from ~/Library/Fonts to the desktop.
b. Restart the computer in Mac OS X.
c. If this solves the problem....you have a corrupt font in one of the above font folders
2. Remove incompatible third-party startup items.
a. Start up in Safe Mode.(shift at startup)
b. Open the Mac OS X hard disk.
c. Drag third-party items out of ....
/Library/StartupItems .......
/System/Library/StartupItems ...
Place them on the desktop .... If you're unsure whether an item is a third-party item or an Apple-installed item, don't move it.
d.Restart the computer.
Note.. If this resolves the issue, add the Startup Items one at a time until the symptom occurs again. That way you'll know which one is incompatible. Repeat these steps and remove the incompatible item.
3. If your computer still starts up to a blue screen, follow these steps.
a. Start up using cpmmand+S....(Single-User Mode).
b. Type: mount -uw /
c. Press Return.
d. Type:
mv /Library/Preferences/com.apple.loginwindow.plist preferences2.old
Tip: There is a space between ".plist" and "preferences".
e. Press Return.
f. Type:
mv /Library/Preferences/com.apple.windowserver.plist preferences3.old
g. Press Return.
h. Type: reboot
i. Press Return.
4. Reset certain privileges.
a. Start up the computer in Single-User Mode.
b. Check the volume with fsck.
c. Type: mount -uw /
d. Press Return.
e. Type: chmod 1775 /
f . Press Return.
g. Type: reboot
h. Press Return.
george

Start Up problems, I'm past the grey screen now at blue screen with spinning gears.

Hello I'm working on my Mothers I Mac I believe its a G5,, I do see IMAC 8.1. Today when she turned it on all that came up is a gray screen with a spinning gear. I tried Disk Utility but the HD wasn't being recognized. After a few more trial and errors I finally reset the SMU, Which when I ran disk utility again the hard drive was recognized. I verified it and it said HD seems to be ok. I restarted and sure enough I made it past the gray screen but now Its stuck on a blue screen with a spinning gear. It looks almost like the login screen is trying to load but never comes up. Every 10-20 sec it flickers and the gear just keeps spinning. The fan was never coming on, not until I reset the SMU so I'm currently letting it cool down. Hoping this helps. Should I run the disk utility again and click the repair hd, even though no errors were listed when I verified it.

An iMac 8,1 is an Intel model. Are you sure it's a G5 (not an Intel model?)
Perhaps you should try reinstalling OS X:
How to Perform an Archive and Install
An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

Reset PMU and Powerbook won't boot past the blue screen with "Mac OSX" box

Hi-
Problem: I tried to reset my PMU, and now when my computer restarts it won't go past the blue screen with the "Mac OSX" logo in the box (and progress bar, that never fills up). I then also tried to reset PRAM, but it still won't boot properly.
Backstory--
I've had my 12-inch Powerbook G4 for about 3.5 years already, so things are starting to get a bit out of whack. I replaced my battery about 3 months ago, which has been great, but recently my power-cord has been wonky (having to unplug it and replug it in to make sure it actually charges the computer, the light flickers on and off, etc). Today it actually started producing SPARKS at the place where the thin white wire meets the white plastic power brick, so I decided it was time to get a new one. Brought it home, plugged it in, and since it seemed like the battery indication icon on the menu bar was all out of sync with the powercord colored-light, I tried restarting it a few times, but still the same. Then, I decided to reset the PMU, which may have been a huge mistake. And now it won't boot past the blue screen... Any advice? I'm going to try restarting it in "safe" mode, but I'd be so grateful for any recommendations. Hope I haven't done something irreversibly stupid with the PMU reset.
Thanks,
Samantha

Hello all,
Thanks for all of your great suggestions and info-- here are a few responses.
1) The disk I just borrowed from my friend appears to be the full retail version-- it looks just like the links that Ali B sent, and is in a large box saying "Mac OSX Tiger, version 10.4"... will this be the proper disk to do an Erase and Install? The only other disks I have came with my Powerbook when it was originally purchased, when it came Panther (I think, 10.3?). Would I use both sets of these disks to do erase and install? Or only the Tiger OSX disks?
2) I get the sense that Disk Warrior or Tech Tool might be necessary, but does it make sense to TRY to do erase-install before buying them? Also, are there any downloadable (for pay) versions of this, or would I need to track down the actual physical disks in Hong Kong or wait for them to be shipped?
3) I haven't yet tried the S.M.A.R.T. test, should I do that first? What is the procedure? Are there any results or ways to know if the drive is too far gone (so that I might instead replace the internal hard-drive) instead of pay 100 USD first to do the disk repair?
4) Cornelius said: "An alternative would be to completely reformat and erase the entire HDD, then re-install and restore your data from backup. If your backup is in the form of a bootable clone of the entire HDD, you can just clone it back." I use Super-Duper to back-up and the most recent one copied the whole thing-- what would be the later procedure of "cloning it back"?
5) As I'm able to use my computer pretty normally right now, but does it still mean that it might crash/die at any moment? Is there any way to tell?
Thanks so much!

Lightroom 6 is displaying a blue screen with a white X through it in the Develop module for all my photos

I can see a large version of my photo in Library mode, but in Develop module, all that appears is a blue screen with an X in it. Has anyone else experienced this? How can it be fixed?

I went to the performance tab and LR6 is not even using my GTX860 card, it's using the onboard Intel HD Graphics 4600. Lame. And I'm still getting the blue screen.
I disabled the GPU use and LR6 sped up considerably, oddly enough, especially the crop tool, which was very slow with LR6. Everything was always lightning fast with 5 and appears to be back to normal after disabling the PGU, so I'm fine with just leaving it disabled. Yeesh.
Will try to update the NVidia drivers and post back.

Blue screen with large text lower left

Similar Messages

Maybe you are looking for