BLUETOOTH ADAPTER LASERJET PRO 100 MFP M175A

Hi,
Can anyone tell me the correct bluetooth adapter for a LaserJet Pro 100 MFP M175A?
I was just about to purchase the BT500 but realised it is not compatible with the model I have.
Thanks in advance.

Hi Orinoco,
Thank you for visiting the HP Support Forums! To get the best answer to your question please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
I hope this helps!
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Similar Messages

HP Laserjet Pro 100 MFP M175nw

Hi, I am having problems connecting the printer wirelessly to the MacBook Pro. I have downloaded the printer software and everything seems to be set up ok. In the System Preferences it reconises the printer and says the printer is ready or idol. But when it comes to printing out a document, once I have sent a document to print my laptop then says 'The printer is not connected' in the settings???
I have done a Wireless Nework Test Report from the printer. In the Diagnostics summary the network Name (SSID) says it has failed and unconfigured, but I do not know how to rectify this?
I'm having this problem with two MacBook Pro laptops. One is running on Mac OS X Lion 10.7.5 the other is running on OS X 10.8.2
Regards
Susanna

You could be having one of two problems, either the printer will not maintain a wireless connection or it just need to connect again. I will post two documents in order then. The first one explains how to set the printer back onto the network (I recommend using the USB cord for this process but there are multiple ways - see documentation).
--Installing the Product on the Network--
If you read through the document and find it doesn't directly address the problem, then I think this one will help you the most.
--Printer is Offline--
Both documents have instructions for both of your computers so they should be most helpful. Let me know if you need any assistance with these.
Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
When a solution is found please mark the post that solves your issue.
Every problem has a solution!

HP Laserjet Pro 100 Color MFP M175nw Print missing/faded down centre of every page

HP Laserjet Pro 100 Color MFP M175nw. Operating on Windows 7 from my laptop wirelessly. Just bought this new a few day's ago and each page of print has about 20mm wide streak missing print running down the centre. what can I do to correct this problem? I have tried printing a cleaning page a couple of times and calibrating color from the Print Quality Menu also a couple of times but this has made no difference. I'm using a Premium quality paper for use in laserjet printer's. Could someone please advise me what I can do. Thanks in anticipation.
This question was solved.
View Solution.

Hi Watcher35,
I see that the new Laserjet Pro 100 MFP M175NW is missing print down the center of the pages, you have ran cleaning and color calibration but the issue is not resolved.
Would this be an accurate example of the issue: but with the "Bb" would be completely missing?
This HP document: Resolving Print Quality Issues may take you though some of the same steps you have already done, I suggest not skipping any steps.
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here.
Regards,
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

LaserJet Pro 100 M175A and Livebox router

Hi all,
I have a question. Is compatible the printer LaserJet Pro 100 M175A (without wireless) with the Orange router livebox 2.0 (printer server mode)??
I cannot see in the specification of the printer if its compatible with the protocol IPP or LPD.
Thanks in advance.
Carlos

Hi @Popper123 ,
I see by your post that you would like to know which toners this printer uses. I can help you.
I did a search on the HP SureSupply website and the toners are a HP 126A.
I have provided the website for you to take a look at. HP LaserJet Pro 100 colorMFP M175a.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

PRINTING IN COOL DOWN MODE PROBLEM IN HP LASERJET PRO 100 COLOR MFP M175a

i recently bought HP Laserjet pro 100 color MFP M175a but it prints like 40 pages and goes to cool down mode and it takes like 10 minutes to cool and again it prints 40 pages so i donot the problem

Hi @teko2014,
I see by your post that the printer keeps going into a Cool-Down mode. I can help you with this. I can help you with this.
I have provided a document with Resolving Control Panel Messages.
Make sure the printer is connected directly to a wall outlet. (don't use a power hub or a surge protector) This ensures the printer is receiving full power and may help this situation.
Update the printer's firmware. HP LaserJet Pro 100 color MFP M175a Drivers.
Select your operating system, click next, click the link for firmware.
Where is the printer located? (enclosed cabinet, desk)
If the printer is in a enclosed area, temporarily move it to another open location and try printing again.
What is the paper's weight and what kind of paper are you using?
What operating system are you using? How to Find the Windows Edition and Version on Your Computer.
How is the printer connected? (USB/Ethernet/Wireless)
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP LaserJet Pro 100 Color MFP M175a and airport express

Hi,
I just bought an HP LaserJet Pro 100 Color MFP M175a and installed it via USB cable on my mac book pro. Then I connected the cable to my Airport Express (where I had before a Samsung printer working correctly) and now it is impossible to find my printer via the airport express. I tried to add it via the printers & scanners (+) but it does not appear in the list.
Then I tried to add it via IP address but the 175a model has no IP address, which means I can put the address of the airport express but it does not communicate with the printer then...
I really tried several options without success and would be really grateful if someone has an idea or a solution.
Thanks in advance for your help!
Chris

Hi,
Thanks for the link that is really useful. However when we follow this process, the printer is not recognized as a printer but as a scanner, which means that everytime we want to print with it, it is not possible because the scanner is not proposed as a device to print.
On the following link http://h30434.www3.hp.com/t5/Mac-Printing-and-Scanning/Laserjet-100-color-MFP-M175a-Mbook-Air-lion-o... we are trying to solve this problem with Provost but it seems to be more complicated than expected. So please feel free to tackle this problem with us .

Laserjet pro 100 color mfp m175

We have a number of HP LaserJet Pro 100 Color MFP M175's in our school. They are connected to the network via ethernet cable rather than wirelessly. A number of users print to them either from a Windows XP (running service pack 2) desktop or from a Windows 7 (newly built) laptop. They were working fine for a few days and then all of a sudden they may have any of the following problems:
unsupported personality error printed at the top of a lot of pages (ie you may try and print one page but hundreds of pages come out with this error).
there may be an invalid driver error on the control panel on the printer
there may be weird alien-looking characters at the top of hundreds of blank pages
initially all of the printers had the driver installed that came with the printers, when we started getting the error, we then tried running the diagnostics doctor on the hp web site, which said all the drivers were valid. We have also tried using the universal print driver from the HP support website, but still get the problem after a few days. We can make all of the errors go away by re-installing any of the above drivers, but then the problem starts happening again after a few days. The server is Windows 2003R2 running service pack 2, we have tried installing the drivers on the server too, but they won't install. Another printer was set up this week in the school office which only has people printing from Windows 7 machines and doesn't have the error - this could be because it's too soon to happen yet, or maybe because there are no Windows XP machines printing to it? (It does print through the same server as the others) Help would be greatly appreciated, we are a school and so can't afford to be wasting lots of paper, plus this is taking up all of our time rather than fixing other issues! thanks in advance

Tammy, sounds like there could be a couple things that might cause this issue. The first of which is that the RJ45 cable you are using to connect the printer might have become corrupted. I would replace that cord and see if the issue remains.
Second, I want you to see about updating the firmware from this website :
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&lc=en&dlc=en&product=5076465
If that still presents issues, you can use that same website to download the more recent drivers. I would uninstall the old version you have on the computer and then open that link and install the full feature software.
Let me know how that goes and I will get right back with you!
I hope you are having a wonderful week, and I hope that the weather where you are located is as beautiful there as it is here!
-Spencer

Want to print remotely to my HP LaserJet Pro 100 color MFP M175nw

Hello! I have a
HP LaserJet Pro 100 color MFP M175nw printer in my office. It is connected to my wifi network from the office and i can use it from several laptops from office with no issue.
Now i want to be able to print and scan papers from my home pc also which is connected to my home wifi network.
I found there it is possible to print pages over internet. Except hpeprint option, how can i add printer from office to printer list from my home pc.
Please help me.
Thanks!

Hi Tolick,
Thank you becoming a member of the HP Support community. I understand that you have an HP Laserjet 100 at your office and you would like to be able to print to it when you are at home.
Super_Dave is correct with the solution he gave you. I just wonder if you have set up the ePrint feature of your Laserjet yet and customized the ePrint email address? If you have then using the ePrint software that you installed on your laptop should allow you to print to your office printer from home. The instructions on how to do this are in the HP ePrint Software User Guide on page 16 in the section titled "Use HP ePrint (Windows)".
If you haven't set up the ePrint feature of the printer I have included a two documents for your reference. The first one is how to get the claim code and the second is how to setup the customized ePrint email address. This may the step that is missing to make the ePrint software work for you.
HP ePrint Software User Guide
Getting the Printer Claim Code
Setting Up a Custom Email Address for ePrint
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

HP LaserJet Pro 100 color MFP M175nw unable to communicate with product

Hi guys,
I've had a HP LaserJet Pro 100 color MFP M175nw for 12months now and it has worked great over my wireless network. I recently upgraded from router from a 5 year old single band router to a late model dualband wireless N router.
Since i did this my HP LaserJet Pro 100 color MFP M175nw was unable to reconnect to my new network.
I have uninstalled the drivers and have tried reinstalling the drivers but each time (after I select Connect the Product/Coonect through wireless network, have tried both Yes retrieve the wirelss settings on my computer and No I will enter the wirelss settings manually) but no matter which I select the printer is installed successfully but then gets stuck at 15% and says cannont communicate with the product.
I have disabled my firewall during the installation and have only used the USB cable when the installation has asked me to do so.
The printer is visible in control panel but each time I do a test print or send something to the printer in the sys tray the print job is shown but nothing ever happens.
The installation will work fine if I install it via the directly connect to the computer using USB option.
If I do a test print fromt he printer itself by going into the network setting, network test it prints a page that says:
Wireless On Pass
Wirelss Working Pass
Network Name SSID Found Fail
Security Fail
Your HP printer cannot find your wirelss router. The WPA authentification method on your HP has changed fromt he default setting.
Is there anyway I can edit the SSID network name and password without having to do this install process?
This is really frustrating. Just spent 3 hours with HP support which got me know where (they were reading the script the supplied me) and then when I rebooted and went to go back to online chat support the website tells me their support is only available during business hours!
Any help would be great

OK time to back up totally. I need to make sure you are following the instructions in the user guide to install this printer. Please start from scratch by uninstalling all software from your computer and outline every step to make sure it is correct.
You have to use the USB cable to set up the wireless connection.
Go here for the User Guide and all installation info. Get your drivers and troubleshooting info here too.
http://h10025.www1.hp.com/ewfrf/wc/manualCategory?cc=us&dlc=en&lc=en&product=5076465
The reason we have to start over is that you started the software installation when you changed your router. You don't have to do this, but now we do.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Scanner icon lost HP LaserJet Pro 100 color MFP M177fw

HP Model: HP LaserJet Pro 100 color MFP M177fw
After "updating" drivers on my IMac my Scanner disappeared and I have not been able to Scan for over a month. I just started a new business and this is debilitating! Can anyone shed any light on this? I do have Yosemite and will unintall it to get my Scanner back if that's what it takes. However, HP should "fix" this issue immediately; afterall, I spent close to $400 on this JetPrinter and am willing to return it.

Hi @BertieBaby ,
I see that you are having issues with scanning after updating drivers on the Mac. I will certainly do my best to help you.
Did you download and install the Full Feature Software when you first setup the printer?
If you didn't, please download and install them from this link. HP Color LaserJet Pro MFP M176/M177 Series Software.
If you already have the Full Feature Software installed, try the following steps:
Repair the Disk Permissions on the Mac:
Close all applications.
On the Apple menu bar, click Go, click Applications and then click Utilities.
Double-click Disk Utility.
Highlight your hard drive/partition on the left.
Click Verify and then Repair Disk Permissions.
Restart the computer..
Reset the Printing System:
Note: This will remove all printers in the print and Fax/Scan, any printer removed can be re-added later by clicking the plus (+) symbol.
Click the Apple icon and then click System Preferences.
Click Printers & Scanners.
Right-click (or Ctrl +click) in the left white side panel, then click Reset printing system.
Click OK to confirm the reset.
Type the correct Name and Password.
Click OK to reset the printing system.
Then click the + sign to add the driver, highlight the printer. (you might have to click the drop down to select the printer's name-LaserJet Pro 100 color MFP M177fw Bonjour) Then click on the Add button.
Test the printing and scanning.
If there is anything else I can help you with, just let me know.
Have a nice weekend!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP LaserJet Pro 100 color MFP M175nw does not connect to wireless network

I recently upgraded my wireless network router. I had my HP LaserJet Pro 100 color MFP M175nw connected to the old wireless network router. The SSID is password protected (WPA2)
I need to connect the printer to the new wireless network router. However, neither the control panel nor blue wireless connection button provide any way for me to do this. The manual has not walked through a way to do this.
There really needs to be a simple, no-nonsense way to just connect the printer to the wireless network. How do I connect this printer to a new wireless network?

Hi @shakayumi ,
I see that you are having issues configuring the printer on the new router. I would like to help.
Restore the printer's network defaults.
Touch the Setup button. (wrench)
Select Network Setup Menu.
Then select Restore Defaults.
Print out a configuration report to make sure the IP address is 0.0.0.0 and the SSID is cleared.
Printing a Configuration Report.
Here are the directions for setting up the printer through the Wireless Direct to configure the printer over the network as Infrastructure.
Turn the Wireless Direct on the printer.
On the printer touch the setup button, (wrench) then select network setup menu, select wireless menu, select wireless direct and turn it on.
On the computer, in the bottom right corner click on the wireless icon and select the printer from the list to connect to. Then open Internet Explorer and type in the IP address (192.168.223.1) for the printer in the address bar.
This will load the embedded web server for the printer.
Select the networking tab, wireless on the left hand side.
Fill out all your network information, select infrastructure, select your network name, put in password and type of encryption. Apply settings.
Click on the wireless icon and connect back to your network name.
Print out a configuration report to make sure the IP address is valid. (192... or 10....)
Now create a new port, this will save you the time, instead of uninstalling and reinstalling the software.
Go to Start, Devices and Printers, right click the printer, go to Printer Properties, select the Ports tab.
Click Add Port, select Standard TCP/IP Port, then select New Port and follow the wizard.
Type in the proper IP address for the printer.
Make sure the printer is online.
Test the printer.
If you are still having issues, then try this method:
If you have a Ethernet cable, connect it from the printer to the router.
Wait about a minute, print the configuration page to see if you get a IP address.
Then type the IP address into Internet Explorer's address bar to bring up the printer's web page.
Select the networking tab, wireless on the left hand side.
Fill out all your network information, select infrastructure, select your network name, put in password and type of encryption. Apply settings.
Then disconnect the Ethernet cable.
Then wait a minute to see if you get a wireless light on the printer, print the configuration page and check the IP address again. Then type the IP address into Internet Explorer's address bar to bring up the printer's web page.
If the printer is back on the network, create a new port. Steps are listed above.
Make sure the printer is online.
Try and print now.
What operating system are you using? How to Find the Windows Edition and Version on Your Computer.
If you need further assistance, just let me know.
Have a great day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP LaserJet Pro 100 Color MFP M175

How do I reverse print or get a mirror image of my document on this printer?
HP LaserJet Pro 100 Color MFP M175
Thank you.

I don't believe reverse print is an option within that printer.
Depending on what you are printing, you may be able to reverse the document in the program itself. For example, in MS Word, you can use WordArt to reverse the text. Highlight your text, choose the Insert tab, click WordArt, pick a style, it will change the text, then go into text effects, then 3D rotation, then 3D rotation options. In the X field, type in 180 which will turn things 180 degress horizontally.
Of course, if you are printing an image, you can simply mirror the image in your program. Then print it.
Hope those ideas offer some help.
007OHMSS
I was a support engineer for HP.
If the advice resolved the situation, please mark it as a solution. Thank you.

Hp laserjet pro 100 color mfp m175nw auto power

does anyone know how to set up the hp laserjet pro 100 color mfp m175nw so that it will turn on after a power failure

Hi,
I afraid it is not possible.
After a power failure you will have to manually turn on the device again.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

HP Laserjet Pro 100 Color MFP M175nw installation issue

Hello,
I have a problem installing my HP Laserjet Pro 100 Color MFP M175nw wirelessly. Back in time when I first installed it, it took me a few installations, but suddenly it was installed. Now after a lot of tries, I still get stuck at the part where the USB cable have to be used to pass the network details to the printer. It get stuck at 15% and after a while it gives the error that I have to connect my printer, although it is plugged and the installation initially continued.
When I put my cable, Win7 is also itself installing the printer, can that be the issue?
Thanks in advance for your help!
Ewout

Hello Ewout,
I would suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
An HP representative has greater resources and will be able to look to see if the system has any hardware issues.
Thanks again for your time.
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

HP LaserJet Pro 100 color MFP M175nw error

i have HP LaserJet Pro 100 color MFP M175nw installed on print server.
sometimes if the printer restart the hostname will back to default hostname setting and need to reconfigure again.
if anyone has ever experienced something similar? or could help for this problem?

Hi tehdjie
I am not completely familiar with his server, this is the consumer support.
I would recommend an uninstall/reinstall of the full feature software for 2003 and a firmware update for the printer. I included the link for the software and the firmware update.
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=1005&lc=en&cc=us&dlc=en&sw_lang=&product=5076...
I would post this issue on the business forum for more assistance.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

BLUETOOTH ADAPTER LASERJET PRO 100 MFP M175A

Similar Messages

Maybe you are looking for