Bluetooth and Plantronics Legacy random disconnect issues

I've been using the latest MAXX with the latest Plantronics Legacy headset. Randomly, bluetooth will disconnect, the call will remain active but does not automatically failover to either handset or speaker option (literally the call is active and I'm in limbo). The only way to reengage with the caller is to press speaker, then to make matters worse, the phone will start cycling through headset, bluetooth, speaker etc. until the call ends! When I recycle the phone and bluetooth the problem goes away, then reappears randomly (days or a week later). Anyone having this issue? Any sense on it being related to the phone or bluetooth? I've installed the latest drivers for both and I'm now going to cycle the phone daily in the event it's a caching issue somewhen in between the OS's. Either way, Motorola or Plantronics need to make a better thing...

Hello DCJW,
Bluetooth headsets are a great way to communicate, especially while on the go. It will be my pleasure to assist with getting your Plantronics earpiece to work properly. First, may I ask is there any physical or liquid damage on the Bluetooth or the Droid Maxx? Also, what software and android version do you have installed on the Maxx? Can I assume that the Plantronics Bluetooth earpiece is the only Bluetooth device profile that’s connected to the Maxx? I would suggest unpairing the earpiece from the phone, then reboot the device, and re-pair the earpiece. Once you have done so then please retest an post your findings. I’m looking forward to your reply.
Thank you…
ArnettH_VZW
Follow us on Twitter @VZWSupport

Similar Messages

Wrt600n / wpc600n random disconnect issues

hi,
i've been running the new AP / cards for a few weeks now, and am seeing some weird behavior on them.
when connected to the AP using either vista (using windows to manage wireless setting), or in xp (using the linksys utility), i'm getting random disconnects. the wireless connection will just drop from 1-10 seconds, then reconnect on it's own.
for these connections, i am forcing the AP and cards to use the n band.
the AP is set to N mode only, and all other settings on the AP are set to Auto. the clients are using all default settings as well, and this issues occurs during web surfing, email, etc. and is repeatable.
any suggestions?
Message Edited by d-rick on 01-20-2008 09:50 AM

r u using the linksys adaptor on vista or on xp
if ur using it on vista
please download the drivers for vista from
www.linksys.com/vista
live life king size

QOSMIO X500-12D - webcam, bluetooth and fingerprint disconnection issues

Hello,
I still got no solution for this problem. I already did a clean install of Win 7 x64 but still no luck. The devices still keeping disconnecting and I have to reboot to resolve. (this is bad since I normaly using a bluetooth keyboard)
Further this Problem seems not only to occour if system goes 'idle' since my bluetooth keyboard was disconnected during typing. (whatever 'idle' means).
Sometimes I was able to recover at least the Bluetooth connection by turn it off and on again within the Toshiba Bluetooth Stack, sometimes with the HW switch (which also deactivates the WLAN) and sometimes only a reboot helped.
It seems that all three devices (Bluetooth, Webcam, Fingerprintsensor) are connected to the same integrated USB root hub within the system.
After my last test, everything was working before I left the system during a nightly copy operation of a 'few' gig, I come back after ~4 hours and all devices were disconnected (HW not installed) --> I checked in the device manager (see [http://support.microsoft.com/kb/241257] to show devices which are not connected and in the computermanagement right click device manager -> View -> Show hidden devices) all 3 devices shown as 'not connected'.
I already opened a case at support and they told me to update the bios. (when I opened the call the tests were done with the latest bios available)
Nevertheless, I also had a small talk with the support and they told me to restore the system from the recovery DVD's and check if the problem persists after the restore of the 'certified' image (drivers and so on). If it still persists they will do a HW repair. (change mainboard or whatever)
*AGAIN... is there still NO solution out there? I have searched the web and found many people with the same issues. (X500 owners and others)*
_What did i tried:_
- different hotfixes as described at [http://aps2.toshiba-tro.de/kb0/TSB0402UQ0001R01.htm] and [http://aps2.toshiba-tro.de/kb0/FAQ0402UC0001R01.htm] ([http://support.microsoft.com/kb/978258])
- right now I am using [http://support.microsoft.com/kb/981214] since the build numbers of the files are higher than in the hotfix mentioned above and therefor this hotfix should also resolve the problem described in [http://support.microsoft.com/kb/978258]. (and I am using an USB audio device)
- I also tried to disable different things of the power management (e.g. disabled usb selective suspending)
Modell QOSMIO X500-12D
Partnumber PQX33E-030009GR
BS-Version Microsoft Windows 7 Ultimate 6.1.7600 x64
BIOS-Version V2.60
CPU Intel(R) Core(TM) i7 CPU Q 720 @ 1.60GHz
RAM 4096MB RAM {color:#ff0000}(<- Toshiba Tools reports wrong RAM size, 6GB installed)
{color}HD Size 499,685,253,120 [Byte] 465.368 [GB]
Video NVIDIA GeForce GTS 360M Version=8.17.12.5896
Screen Resolution 1920 x 1080

HI,
It seems that I have found a solution for this problem.
If you have read my first post exactly you should have read that i already disabled the selective USB suspend.
I have connected 2 external USB hubs which are powered by an AC/DC adapter. On this USB hubs I have connected varios USB devices...7.1 USB Headset, external HDD's, PDA, Card Reader, PKI device, USB Sticks, etc.
Nevertheless, I also disabled the the Powermanagement settings on all devices which were involved and where it is possible.
To do this goto the device manager --> right click --> View --> show devices by connection.
Now locate your bluetooth, webcam and fingerprint device. (be carefull names might be different because of different drivers!)
Should be under ACPI x64-based PC --> PCI-Bus --> Intel(R) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller --> {color:#ff0000}*USB-Root-Hub*{color} --> {color:#ff0000}*Generic USB Hub*{color} -->
There you should find all integrated devices which are troublemaker:
* {color:#ff0000}*AuthenTec Inc. AES2550*{color}
* Bluetooth USB Controller-7 from TOSHIBA
* USB-Webcam
Now double click every device in this 'chain' and locate the powermanagement TAB. (Please note that NOT all devices in this chain do have a powermanagement tab and cannot be configured....that's ok)
On the power management tab uncheck 'Allow the computer to turn off this device to save power' and click OK.
I have done this for all devices which are {color:#ff0000}*marked red in the chain above*{color}. (_I also deactivated the USB selective suspend in the used powermanagement plan!)_
It seems to work now....until now no more bluetooth problem or devices which were gone. It might be that it is enough to disable the Power saving settings only on one or two devices, but right now i had no time to test.
Please also keep in mind that I am using the latest Intel Chipset driver, latest Toshiba drivers and installed the Microsoft hotfixes described in my first post in this thread!
It would be very nice if some people can try and post here if it works!
Regards

MACbook Pro/Bluetooth?Disconnect issues with an Apple mouse and keyboard

Well Folks-
The disconnect issue I have with my Macbook Pro using a wireless Apple Keyboard and mouse is BACK. I wiped the hard drive clean and I reinstalled and I updated the O.S. system including purchasiing Lion via the ineternet one by one and the disconnect issue has retuned on Day 4. What else is there left to do? Anyone?

Hi....
Might be corrupted Bluetooth preferences (.plist)
Go to /Library/Preferences
Move the com.apple.Bluetooth.plist file from the Preferences folder to the Trash.
See if that helped. You may need to re, "pair" your devices and the Mac OS X will re geneate a new .plist file for you.
Make sure the batteries are fresh also.

Bluetooth keyboard and mouse disconnect issue

I have a 20" Aluminium iMac with the bluetooth keyboard and mouse. Recently i've started to have some issues where the keyboard keeps disconnecting & reconnecting, also the mouse going slow and jerky. They have been working perfectly fine for the past year but only recently started to play up. I have gone into bluetooth prefs and deleted them and re-connected, this seemed to be a temporary fix but after a while it started again, although not as bad as before. I usually leave my Mac on all the time and just put it in sleep mode, the issue now seems to be waking it from sleep as well. I have tried restarts and re pairing as i said before but nothing seems to be solving the issue. Any ideas or fixes would be appreciated.
Thanks.

I'm experiencing the exact same problem. I have an MacBook with the bluetooth keyboard and mouse. I've had them for about a year and they've worked perfectly; this problem has only showed up in the last couple of weeks. I didn't know whether it was a hardware problem or software (perhaps a recent software update), but considering the exact same thing is happening to someone else I'm inclined to think software rather than hardware.
The keyboard disconnects and reconnects (immediately) a couple of times an hour. It's not such a problem with the keyboard, but whenever that happens, the mouse goes very slow for several minutes, until it finally works out. The mouse doesn't disconnect (I have hardware growl on and am notified of disconnections/connections); it just goes very slow.

Yoga 13 Bluetooth (and Wi-Fi) serious issues

Yoga 13 Bad Wi-Fi and Bluetooth – almost giving up (and giving back)
I have purchased the Yoga 13 a week ago, and everything was fine. EXCEPT, I experienced problems to connect to the public Wi-Fi. I get 5 seconds of Wi-Fi connected, and then 5 seconds of "limited connection", and again "connected" for 5 sec., "limited" for 5 sec., and so on. I convinced myself it was because of the large number of people connected at the place I have been at. But now I am sitting here, with just a few people, and it seems they are all connected well, and only I get the 5 seconds cycle.
But it wasn't for this issue that I started to feel frustrated with my 1 week old Lenovo Yoga. It's the Bluetooth issue that really bothers me. I am trying to use Microsoft Notebook Bluetooth 5000 mouse. I have to use it, since I have to use both USBs for other devices. At first it worked fine. Just the random disconnections everyone on the net are talking about. I tried everything: I set the power management of the realtek rtl8723A chip so it won't be able to turn off the BT. I also set the BT to automatically search for devices under services.msc management, which supposed to help reconnection after sleep. Each time it seemed like the problem was solved, until the next time it randomly disconnected.
So I have updated my machine. First, I've updated the BIOS from CN52 to CN55. I don't know if it's relevant, but I mention it anyway. Them I've updated the realtek drivers, according to the recommendations I found in Lenovo support forums. Things only got worse.
Now the PC either (1) can't recognize the mouse at all, although it recognizes my cell phone, and my cell phone recognizes the mouse; (2) or it recognizes the mouse, and then asks me to pair with the mouse using a code (!!) as if the mouse is some kind of a laptop. Even then, if I press Next (using 0000 or 1234 as a code results with nothing), the PC starts some driver installation, calling the mouse HID compliant, and usually the process terminates itself before it finished. Only once for a dozens of attempts, does the PC recognize the mouse properly, installs it and the mouse works – only it became incredibly laggy, barely usable. It is hard to believe it worked fine from the beginning, and any update just made it less usable.
Now, trying to downgrade the Realtek driver results with the same problems. I tried various versions of this driver – no success. I also made a system restore once, to get back to the point before updates, but the same result: no mouse recognition / all sorts of problems I mentioned above.
I am frustrated. I bought this computer for an urgent work, and already spent 5 or 6 hours just to make it work, and still no success. I am just a moment from giving up. Any ideas?
[*pardon my English]

I forgot to mention I used a fresh pair of batteries for the mouse (rules out simple solutions).

My phone will randomly disconnect from the wifi and when I retype the password it says it is wrong. It will eventually work but I have to wait for a message to pop up on my screen to allow me to retype the wifi password.

When I first got my phone it worked perfectly fine with the wifi. Although later on I began to have problems connecting it. It will randomly disconnect from the wifi and when I try to retype the password it tells me it is wrong, although it is right. It will eventually work but in its own time, a message will pop up and allow me to type in the password and it will work. But sometimes it takes an hour or more and sometime it takes 10 minutes. I've seen where other people have had this problem but I don't know how to fix it. I'm not sure if it's an issue with my phone or if it's with my wifi. Does anyone know how to fix this?

Does this happen with all Wi-Fi hotspots? A specific one?
Have you tried forgetting the Wi-Fi connection and then reconnecting to it?
What about power cycling the Wi-Fi router?

N80 bluetooth disconnecting issue

I am unable to use my bluetooth gps with N80. It disconnects the bt connection about once in 5 minutes.
I've read some forums and it seems that others are also experiencing similar bug in N80 (bt headsets and gps's)
My firmware is 3.0617.0.6
I'm using Navicore software and disconnecting happens both with location api and direct bluetooth connections. This (using location api) makes me believe, it is operating system issue and not Navicore.
I'm waiting for an upgraded firmware. When will it be released and is this bug known/fixed?

Hi there, I had problems with the bluetooth too. I have the same firmware as you and was having problems with a headset. I took it to Phoneland and although there is no new firmware at the moment there is a service upgrade (Bluetoothe, Wi-Fi etc)which fixed the problem with the headset. Maybe you need to get yours done too. Just tell them your having trouble with bluetooth and they will have a look. It's free too as long as it's still under warranty. Hope this helps.
Is that an N95 in your pocket or are you just pleased to see me?!?
Life's too important to take seriously.
Nokias I've owned 3210, 3310, 6100, 7650, 6600, 6680, 6630, N80, N95
I'm a 26 year old boy BTW

W520 random sleeping and black screens - videos of issue attached

Btw my mobo,cpu,memory i believe were all replaced last time i took it in with this issue...
Still getting it consistantly:
Random Black Screens and Random Sleeping:
www.youtube.com/watch?v=AvWl9ck26xI
Black Screen:
www.youtube.com/watch?v=7A3NqnC80iU
I thought before maybe its Bluetooth related as sometimes when screen would turn black and then come back, I would get a 'Bluetooth Device Not Discoverable'. So turned off Bluetooth in the BIOS, but still having display/sleep issues.
I removed hte Lenovo Power Manager/PM Driver, and turned off sleeping in the Windows power settings (in every setting including if Low Battery Action). Any ideas?
I just upgraded to a 3 year warranty (the more expensive one), should i just ask to replace mobo/cpu/memory again or will Lenovo actually test it for other issues?
Thanks,
Ari
Solved!
Go to Solution.

Well my issue wasn't an external monitor... it would goto sleep by itself when Im trying to write code/programming... then randomly wake and go back to sleep up constantly ruining workflow (or wait a few hours Im sleeping at odd times in the morning lol). or the monitor would turn black suddenly. I think I tested via external monitor but didn't matter what result was, the random sleeping issues indicated a larger issue.
It was a crimped connector the 1st time it went back to Lenovo. the past 4/5 times its gone back i think they are stumped. For me, Im honestly not sure... it might be the OS is on a mSATA instead of the regular hard drive and Windows doesnt know how to handle that hardware.
Their newer W540 manual seems to indicate do an OS on mSATA at your expense.
Do you have an mSATA OS? Anyway, thats a very small chance. not sure.

SAMSUNG AND PLANTRONICS BLUETOOTH VERY BAD COMMUNICATION PROBLEM

I RECENTLY PURCHASED A NEW SAMSUNG REALITY PHONE AND A PLANTRONICS PBT245Z BLUETOOTH.
Major Problem. Intermittently when I place a call using my Bluetooth (either driving or at home), I would hear the first ring (and only the first ring) of the person I'm trying to call. My headset then goes dead, however, the recipient will answer the call after hearing several rings but not able to communicate with me.
I have been to Verizon several times, they exchanged the Bluetooth and the phone twice, but I'm still have the same problem.
For some reason, when I try to show the technicians at the Verizon Store, it works fine.
Before I throw this phone and bluetooth under the bus, can anyone help or explain why this is happening.
Thanks
Cjaco

Hi db93oh:
You have done some great troubleshooting steps on the device, and this issue should be fixable considering it worked before. The first question to answer here is about the software. Your version is current, and there hasn't been any new software released to alleviate problems like this. Here's what I would recommend to get the issue resolved:
1) Remove the your car listing from the phone AND remove your phone listing from your car. Set it up again, and retest.
2) If step 1 fails, try to do a restore on your Alias 2 (steps here). This WILL erase everything from your phone. Ensure you have downloaded Backup Assistant and you have your pictures safeguarded by sending them to an email address or pix place. Follow step 1 again, and re-attempt.
Please follow up with your results!
Good luck,

Droid 3 and Plantronics Bluetooth

Just got a Droid 3. I really like the phone! I also got a Plantronics PLT_K100 Bluetooth device. It's supposed to allow you to use your phone through the radio on your car. It worked once, well, mostly, anyway. I pressed the button on the Plantronics and I heard through my phone "Please say a command". I said "Call Bill". The phone answered "Calling Bill". Then, I heard the phone ringing through the radio, and when answered, that was through the radio, too. When the call ended I heard "Call terminated" through the radio. That was the last time it worked. Now, the only thing I hear through the radio is "Call terminated"! I called Plantronics support, and was told to un-link the device, then remove it from the Droid, then turn off the Droid and remove the battery. Replace the battery and re-link the device. No joy - same issue. So I thought the Plantronics was defective. Took it back to the Verizon store and got a new replacement. It has the exact same issue! So now I think it is the Droid. There are very few settings on the Droid for Bluetooth and none has changed. I believe it is a software bug. Does anyone have any ideas?

Have you cleared the pairing for the device and readd us? Also under the bluetooth settings there should be a hardfree option and this needs to be checked... Also the reciever requires you use a radio station try changing the station option..
I have a simular unit made by Jabra and it works fine, im not impressed with quality but it connects and works without issues.

RDS 2012 - Slow Perforamance, random disconnects - The RDP protocol component X.224 detected an error (0) in the protocol stream and the client was disconnected.

We have an RDS environment configured on server 2012 with approx. 20 users connecting for remote app utilization across 4 different locations that are connected via VPN. Server 2012 has great resources from the virtual host so system resource allocation
shouldn't be an issue. I'm thinking these errors are correlating with the performance problems. Any recommendations on how to effectively end these errors or to boost performance?
RDS Log File
Log Name:      Microsoft-Windows-RemoteDesktopServices-RdpCoreTS/Operational
Source:        Microsoft-Windows-RemoteDesktopServices-RdpCoreTS
Date:          3/3/2015 7:47:51 PM
Event ID:      97
Task Category: RemoteFX module
Level:         Warning
Keywords:
User:          NETWORK SERVICE
Computer:      REMOTE1.mzltg.local
Description: The RDP protocol component X.224 detected an error (0) in the protocol stream and the client was disconnected.
System Log Error Log Name:      System
Source:        Schannel
Date:          3/4/2015 10:42:02 AM
Event ID:      36887
Task Category: None
Level:         Error
Keywords:
User:          SYSTEM
Computer:      REMOTE1.mzltg.local
Description: A fatal alert was received from the remote endpoint. The TLS protocol defined fatal alert code is 49.

Hi Shane,
Do you have any progress at the moment?
Regarding the TLS error code 49, it indicates a valid certificate was received, but when access control was applied, the sender did not proceed with negotiation.
More information for you:
SSL/TLS Alert Protocol & the Alert Codes
http://blogs.msdn.com/b/kaushal/archive/2012/10/06/ssl-tls-alert-protocol-amp-the-alert-codes.aspx
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

The Wi-Fi randomly disconnects, and now it is not even available as an option in the "Network Preferences" area.

After having the MacBook Pro for about 1.5 years, the Wi-Fi randomly disconnected. Ethernet works fine, however, whenever I tried clicking "Turn Wi-Fi On", nothing happens. I have tried a SMC reset, resetting the PRAM (resetting the PRAM worked for a bit and then suddenly it didn't), and shutting down/restarting the laptop multiple times. Often times does the Wi-Fi turn back on, however it immediately disconnects after about a minute. Now I have come to a point where, in the Network Preferences area, the Wi-Fi option is not available on the list that is on the left side of the preferences. A PRAM reset solved this case, but for some reason it doesn't work anymore. I took it into a local Mac store, where they said that they would need to check if it was the Wi-Fi card that was causing the problem and would need to charge me $50 for the tech service to check it out (which is obviously what I would not do...at least if there is some way to go around this). Help.
~TheIvyX

I am also suspicious that your WiFi card may have a probelm.
Do an SMC Reset before you do anything else.
Intel-based Macs: Resetting the System Management Controller (SMC)
An appointment at the genius Bar at an Apple store is FREE, in warranty or out.
Apple only charges for services when parts are needed, and then it is a flat rate for the repair, no diagnosis fees and no surprises.

USB drive randomly disconnects (and causes deep traversal in Time Machine)

I have two external drives connected through a USB hub and they get sometimes randomly disconnected. Sometimes when I plug the drives in, only one appears on the desktop. Then I unplug them, plug them back in and just the other drive appears.
The other problem is that I back up one of the drives to the other using Time Machine and when the drive disappears by itself, Time Machine needs to perform deep traversal of the whole drive AND backs up the whole drive from scratch (see the console log below).
Any suggestions are appreciated!
Thanks,
Peter
8/5/08 Aug 5, 7:20:33 PM /System/Library/CoreServices/backupd[27374] Node requires deep traversal:/Volumes/monster reason:kFSEDBEventFlagMustScanSubDirs|
8/5/08 Aug 5, 7:24:31 PM /System/Library/CoreServices/backupd[27374] Starting pre-backup thinning: 203.69 GB requested (including padding), 43.57 GB available
8/5/08 Aug 5, 7:24:31 PM /System/Library/CoreServices/backupd[27374] No expired backups exist - deleting oldest backups to make room

The USB hub could have a problem (or not enough power); try connecting the drives directly to the Mac and see what happens. Is it a powered USB hub, and are the drives self-powered (i.e. each drive gets its own power from a wall socket/surge protector)?

Bluetooth and direct call from Outlook 2010 issue

Hello.
I connect Nokia 5300 via Bluetooth and can call from Nokia Communication Center. But when i try to call from Outlook, phone begins dialing and immediately shows strange icon "D" and break dialing.
If i connect via USB - all work without any problems - form Nokia Communication Center and from Outlook also.
In OS Nokia is shown as Standard Modem via Bluetooth (Microsoft)
PC Suite 7.1.6
Windows 7 x64 Ultimate RUS SP1
Outlook 2010 x64

Workstations are on a domain
Also it may appear to be more of a issue with 2000 .pub type of files. As users can create a 2010 .pub file and it works great fine. But every time a user opens a 2000 .pub file via outlook and tries to edit and save it requests the
user to do a save as, vs. save to outlook temp location.

Bluetooth and Plantronics Legacy random disconnect issues

Similar Messages

Maybe you are looking for