Bluetooth  "discoverable"  and can't switch that off!

Hello all,
I've never seen this: my bluetooth was ok, I had it on but not discoverable. Now, I just tried having my phone seen - no ^problem there. For some reason I had turn the discoverable on.
I can't switch it off now! I click the tick to make it not discoverable, a second later it's back on!
My computer is now discoverable all the time.
I tried trashing the bluetooth plists, restarting, the usual.
No result.
please help me!
T

I dont know whats happened but...
I'd try plugging it into your PC and see if itunes recognises it, from there maybe try a sync of some stuff; or if that doesnt work try a restore.
Failing that, wait until the battery runs out, watching a film whilst using the internal speaks on full is a good way to burn through the juice, and see how it behaves after fully charging.
Do the buttons work at all? Can you tell us what FW your running?
hope you get it working.

Similar Messages

  • My boyfriend and I have each an IPhone with two different Apple IDs. Since the recent software his contacts appears in my Iphone. How can I switch that off? I have be looking at both Iphones and Iclouds.

    My boyfriend and I have each an IPhone with two different Apple IDs. Since the recent software his contacts appears in my Iphone. How can I switch that off? I have be looking at both Iphones and Iclouds.

    All apps and purchases are linked to your apple ID, so you can't share them across 2 devices that are using different apple id's, it won't work. the purchases that are on your mac at the moment will only work with the apple id they were brought with.
    the only thing thats possible to share is purchased music. you have to first covert it to mp3 within itunes, then your bf can import it into his own itunes library and sync with his phone.

  • Can't get to desktop and can't switch it off anymore

    Hello, all of a sudden my I-phone stays in the phone mode and I can't get it back to the main menu. I can't either switch it off. Does anyone know what's happening and how to solve this?
    Thanks

    I dont know whats happened but...
    I'd try plugging it into your PC and see if itunes recognises it, from there maybe try a sync of some stuff; or if that doesnt work try a restore.
    Failing that, wait until the battery runs out, watching a film whilst using the internal speaks on full is a good way to burn through the juice, and see how it behaves after fully charging.
    Do the buttons work at all? Can you tell us what FW your running?
    hope you get it working.

  • Trying to update to 10.7 I tunes to windows 7 64 bit and download gets stuck and can't switch it off without crashing computer-pain and frustrating,can anyone at apple help?

    Trying to update to 10.7 I tunes to windows 7 64 bit and download gets stuck and have to crash the computer to stope download window to try other options-it's been the same all week
    Even when I try to download 64bit updated as forums say it gets stuck.
    You would have thought it should be a simple update as usual.
    Any advice
    Thanks,

    I'd first try downloading an installer from the Apple website using a different web browser:
    http://www.apple.com/quicktime/download/
    If you use Firefox instead of IE for the download (or vice versa), do you get a working installer?

  • Only one track is downloaded per album on itunes on my iphone 5. Every time I download a new track it deletes the previously downloaded track on that album. Why is this happening and how can I switch it off?

    Only one track is downloaded per album on itunes on my iphone 5. Every time I download a new track it deletes the previously downloaded track on that album. Why is this happening and how can I switch it off?

    Most YouTube content requires the Flash plugin. Sometimes it's necessary to uninstall then reinstall that plugin.
    Uninstall the Flash plugin then reinstall new >  Troubleshoot Flash Player | Mac OS
    Very important to uninstall the currently installed plugin first.
    Now launch Safari and try a video.
    If you have the ClickToFlash extension installed, that can prevent Flash based video from streaming. It can also be installed as a plugin in /Library/Internet-Plug-Ins.
    And check to see if Safari is running in 32 bit mode. Right or control click the Safari icon in your Applications folder then click Get Info. If the box next to:  Open in 32 bit mode  is selected, deselect, quit then relaunch Safari.
    You may also need to delete the cache associated with Safari .
    Open the Finder. From the Finder menu bar click Go > Go to Folder
    Type or copy/paste:   ~/Library/Caches/com.apple.Safari
    Click Go the move the Cache.db file from the com.apple.Safari folder to the Trash.
    Quit and relaunch Safari. Try a video.

  • Just tried to sync my ipad with my macbook and the ipad seems to have frozen and i can't switch it off or open any app

    just tried to sync my ipad with my macbook and the ipad seems to have frozen and i can't switch it off or open any app

    Hold down the Sleep/Wake button and the home button together until the apple logo appears (ignore the ON/OFF slider) then let both buttons go and wait for device to restart (no data will be lost).

  • I have the 5S and there is a check mark next to no sound when phone is in lock mode that prevents me from getting my calls and messages. How can I turn that off? Clicking it does nothing. Please help! Thanks!

    I have the 5S and there is a check mark next to no sound when phone is in lock mode that prevents me from getting my calls and messages. How can I turn that off? Clicking it does nothing. Please help! Thanks!

    Thanks for taking the time to try to help me. . I checked and the Do not disturb is off. The check is still there stopping calls from coming in when phone is locked. Any other ideas? Thanks again!

  • I have a 3GS. Am trying to sync a plantronics explorer 232 Bluetooth headset and can't figure it out. I have Bluetooth turned on but it searches for devices and the headset never shows up. Anyone know exactly how to do this?  My tech skills are lacking

    I have a 3GS. Am trying to sync a plantronics explorer 232 Bluetooth headset and can't figure it out. I have Bluetooth turned on but it searches for devices and the headset never shows up. Anyone know exactly how to do this?  My tech skills are lacking

    I have the same blueparrott headset headset with the directions. Actually reading them just fixed my iphone pairing issue.
    Here they are in case u still need them along with what I needed to do to get mine to work with iphone 4
    Pair Headset with Phone
    Turn off headset off
    Hold down headset's MFB (large top button) until red & blue lights flash and you hear 2 rising tones, followed by 4 more tones. Must wait for all before you release the MFB button!! (I had my hubby hold the MFB while I waited for the tones since both come from the headset
    Release the MFB and follow your phone's instructions to place it in 'bluetooth' discoverable mode.  With the iphone4, go to "General" and then "Bluetooth" and turn indicator to "ON".
    This is where my issue occurred as the phone could not find the bluetooth, although it worked with my LG phone.  So after trying it several times thinking I was nuts and that the issue was with the iphone, I looked further in the blueparrot's directions and found this step that fixed the issue.
    Reset Paired Devices List
    On the bluetooth, press and hold down both the volume up & volume down buttons for 5-6 seconds.  A double beep will be heard and the list will be reset.  Pairing info for devices previously paired will be lost.
    The bluetooth directions provide this as step 4 but that did not work for my phone (see below)
    4. Once the phone discovers the headset, select "pair" and enter "0000" code and that when pairing is complete the blue light on the headset will stop flashing and phone will prompt you to 'connect'.
    This is what I had to do after resetting the device list on my bluetooth
    4. My iphone instanting discovered the headset and displayed it under 'Devices" but showed a message that it was 'not connected'.  Once I selected the device on the iphone by pressing on it then it changed to "connected". 
    Even when I turn the bluetooth on and off the device remains on the list and alll I do is select it to connect and disconnect after I turn on my blueparrott bluetooth
    I hope this helps others!   

  • IPhone 3GS stuck and I cannot switch it off. Screen shows an USB plug connecting to iTunes.

    My iPhone 3GS stuck and i cannot switch it off. Screen shows an USB plug connecting to iTunes.

    this usually appears when your iphone is not registered correctly with apple/itunes so plug it in to your computer and try setting it up if it gives you the correct prompt. if not try to restore and sync. usually tis problem appears when your iphone has no sim card or is not registered correctly. in this case you need to contact your carrier and set up an account. if you are trying to use it without a service or sim card then unless you go through some sketchy program of hacking it it is worthless to you without a sim or service plan. i have the original iphone1 i got from a buddy of mine i used as an ipod before getting an iphone4 and if i took the sim out this message appears. if you do have a sim and a service plan than there might be a problem with the phone reading the sim card you you can go into your service provider's store and request a new sim to see if that works.
    I am sorry if none of this is helpful for i have no other suggestions.

  • I need to restore iPhone but it won't let me until I turn off "Find my iPhone".  I can't turn that off because of the restrictions passcode.   Please help

    I have a restrictions passcode on my son's phone.   I had recently changed the code and now what I thought was the new code, isn't working.
    I need to restore the phone, but it won't let me until I turn off "Find my iPhone."   I can't turn that off without a passcode.
    Please help!

    Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled - Apple Support
    You'll need to use the instructions in the link above to put it in recovery mode.

  • I am on OS X and i am having problems sending pictures from the new pictures app via email.  when i hit the sharing button i have the option to send via iMessage or Facebook but the email option is ghosted and can't be checked off.  any suggestions?

    I am on OS X and i am having problems sending pictures from the new pictures app via email.  when i hit the sharing button i have the option to send via iMessage or Facebook but the email option is ghosted and can't be checked off.  any suggestions?

    I've resolved my problem now.  It wasn't iphoto: preferences:@ that I needed but iphoto:preferences:general where there is the option to choose email for sending photos.  Can't believe I missed that before.

  • MY ipod Touch is Stuck & says Disabled it will not come out of that screen at all. How can I get that off so my device will work

    MY ipod Touch is Stuck & says Disabled it will not come out of that screen at all. How can I get that off so my device will work

    Disabled
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Forgot passcode or device disabled
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:                                                             
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes       
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:           
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        
    If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.
    If you previously synced to the computer then you may be able to recover use of the iPod without erasing the iPod by following the instructions here:
    Disabled Recovery-must use syncing computer.

  • I put a vacation alert on my text and can't take it off.

    I put a vacation alert on my iPhone 4 text and can't take it off.  Help!

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • How can I transfer photos from my comp to my ipad2.I have the connection kit and can transfer photos that are direct from camera BUT if I transfer photos from comp to card it will not recognize them ????

    how can I transfer photos from my comp to my ipad2.I have the connection kit and can transfer photos that are direct from camera BUT if I transfer photos from comp to card it will not recognize them ????

    To sync photos from a Mac or Windows PC to your device using photo applications
    Make sure you have the latest version of iTunes installed.
    In iTunes, select your device's icon in the Devices list on the left.
    Click the Photos tab.
    Choose "Sync photos from."
    On a Mac, choose iPhoto or Aperture from the pop-up menu.
    On a Windows PC, choose Photoshop Album or Photoshop Elements from the pop-up menu.
    Note: Some versions of Photoshop Album and Photoshop Elements don't support collections. You can still use them to sync all your photos.
    If you want to sync all your photos, enable the option for "All photos, albums, events, and faces." If you want to sync photos from only some albums, events, or faces, enable the option for "Selected albums, events, and faces" and then select the albums you want. If syncing on a Mac with iPhoto version 6.0.6 or later, you may enable the option to "Include videos" to sync videos directly from iPhoto to your device. (Requires iOS 3.0 or later).
    Click Apply.
    To sync photos from a folder on your hard disk to your device
    Drag the images you want into a folder on your computer. If you want images to appear in separate photo albums on your device, create folders inside the main folder and drag images into the new folders.
    In iTunes, select the device icon in the Devices list on the left.
    Choose "Sync photos from."
    Select Choose Folder from the pop-up menu and choose your main image folder.
    Click Apply.

  • Hi, my iphone 4s is saying im not connected to the internet, my wifi is on and ive tried switching it off and on and nothing, still cant connect. help!

    hi, my iphone 4s is saying im not connected to the internet, my wifi is on and ive tried switching it off and on and nothing, still cant connect. help! it was working perfectly fine earlier today.

    Try a reset by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.

Maybe you are looking for

  • Ctrl+alt+backspace doesn't work anymore after system update

    After a recent system update (xorg got updated among other packages), ctrl+alt+backspace doesn't restart gdm anymore. Before you say it, I have the following in my /etc/X11/xorg.conf Section "ServerFlags" Option "DontZap" "false" EndSection Here is t

  • Built-in Create operation - confusing behavior ADF BC4J, ADF Faces

    I noticed a strange behaviour of Create built in. Every time when I try to insert a new row, but validation fails, form displays error message, and then when I correct the field causing validation to fail and commit, I get a whole bunch of validation

  • SQL2012 Express Error: "insufficient system memory in resource pool 'internal' to run this query"

    I am running the SQL2012 express (version shown below) and get the following error after a day or two of operation. This is a new server 2012 installation. source: SQL2012Express  "There is insufficient system memory in resource pool 'internal' to ru

  • If check box then combo box

    Hi there, I have been searching for the answer for this question. I am trying to write JavaScript for the following situation.  If my check box is selected then the values of combo box 1, combo box 2, and combo box 3, will all read "N/A".  My fields

  • Failed to retrieve file via FileDescriptor URL

    Hi, I'm trying to retrieve and display image file uploaded to FilePublisher example provided in the SDK using FileDescriptor url property. It doesn't seem to work - How can I actually retrieve the file uploaded in AFCS for further processing (instead