Bluetooth driver not working on Windows 10

Hello everyone, I upgraded my PC from Windows 8.1 to Windows 10 today. Everything else is working fine but the bluetooth driver seems to be incompatible. I had the 'Mediatek (Ralink) bluetooth software driver for Windows 8.1' installed earlier, which doesn't work with Windows 10. I checked with the Ralink website and the HP driver support but didn't find anything as yet.  My question is, will the driver for Windows 10 be made available soon?thanks

Hi  ,
Thank you for visiting the HP Forums! A great place where you can find solutions for your issues, with help from the community!
I came across your post about the Notebook, and wanted to assist you! I have looked into your issue about your HP Pavilion 15-n010tx Notebook and issue with drivers for Bluetooth and Windows 10. Here is troubleshooting when drivers are not available yet. Have you tried in the Device Manager to update the driver that is currently installed? In the device manager try selecting find new hardware.
Here is a link to the HP Support Assistant if you need it. It has a Wireless support assistant inside it that might help you. The updated drivers will be posted as available. We are seeing them update regularly. I would check back to your drivers page. I hope this helps. Thanks.  

Similar Messages

  • HP deskjet D2300 series driver not working in windows 7

    This procedure is much too complicated for an average user. You know that millions of Wondow XP users are switching to Windows 7. I' sure that most of them are facing similar problems. HP should come with a user friendly solution that solves the above issues. Don't you think?
    My problem remains unsolved.

    Hi dvh,
    Welcome to the HP Forums!
    I see that your HP Deskjet D2300 series driver not working in windows 7.
    Do you see any error messages with the installer? Or does it just close out and doesn't install?
    In the meantime, please try using our HP Printer Install Wizard for Windows.
    Hope to hear back from you, and have a great day!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • Bluetooth is not working with Windows 8.1 on U410 touch

    Hello,
    I have a Lenovo U410 touch, and i just upgraded to windows 8.1 though the store.
    And the bluetooth is not working at all, it says that the PC is searching for Bluetooth devices. While everything was working great before.
    I have updated all the drivers from the Lenovo websites and still nothing is working
    I went to device manager and checked under bluetooth: Intel (R) Centrino Wireless Bluettoth 4.0 + High Speed. Microsoft Bluettoth Enumator, Microsoft Bluetooth LE enumarator all 3 are up to date.
    Then I went to network connections (from the start) and i have a red cross under Bluettoth network connection 2 and says not connected.
    My windows is also up to date
    I really think gooing back to Windows 8 since i cannot listen to my music on my beatbox and connect to my phone and tablet,
    Thank you for your help

    neokenchi wrote:
    hi erabbath,
    Welcome to the Forums.
    If you have the Intel Centrino N2230 Wireless + Bluetooth adapter, can you try to:
    1. Navigate to the Control Panel (large icon view) > Devices and Printers and try to pair a bluetooth device (i.e. Bluetooth Headset) and observe if it gets detected under the device list.
    2. If the Bluetooth Headset is listed but it's not working try toright click on it > choose Properties. On the bluetooth properties Window, go to the Services Tab and check all the appropriate bluetooth services.
    Sample picture
    Let me know your findings.
    Regards
    Thank you very much for your answer,
    I went to Control Panel  > Devices and Printers and i tried to add a new device as the bluetooth doesn't appear this is what i got. By the way the bluetooth was on.
    Link to picture
    And this is what i have on the Bluettoth
    And it search endlessly whereas before the upgrade it was working properly,
    All the drivers are up to date as well as windows updates are all installed
    Thanks in advance for your help
    Regards
    Moderator note; picture(s) totalling >50K converted to link(s) Forum Rules

  • Bootcamp bluetooth mice not working in windows 7 pro

    I have an early 2008 MBP and just installed Windows 7. I cannot, for the life of me, get either of my bluetooth mice to connect in Windows 7. Both worked in XP and both work in Mac OS. The install is a clean one, not an upgrade. The mice are an older Logitech MX Revolution BT mouse and a Razer Orochi. During setup, they appear to connect, but don't. On second try, the bluetooth connection window just keeps spinning while connecting to the mouse (no system or app hangs, just no activity.) Any help would be greatly appreciated.

    Thanks, alrich68.
    Just before I checked your reply, I found a VERY similar post on MacRumors with a couple more steps and clarification on why the problem exists -
    http://forums.macrumors.com/showthread.php?t=630024
    gloss wrote
    It took me two hours, but I fixed this last night.
    First off, you need to go into Mac OS and remove the keyboard and mouse from your Bluetooth settings entirely. You'll add it back in later.
    Boot into Windows.
    Click on the Bluetooth control panel, and go to settings. Under Hardware, it probably says 'Generic Bluetooth Adapter'.
    Click 'Properties' and 'Change Settings'.
    Go to drivers, and 'Update Drivers'. Have Windows look on your machine to find all available drivers ('Let me pick from a list')
    UNselect 'Show Compatible Drivers'.
    Look for 'Apple' in the manufacturer names, then select the Apple Bluetooth Driver. Install.
    Once this is done, pair your keyboard through the wizard. It should now bring up a passcode and confirm it much more quickly than before.
    Once this is done, go back to Bluetooth settings and return the Drivers to 'Windows Generic'. If you leave it on the Apple drivers the keyboard will disconnect randomly and frequently.
    Your keyboard will now be paired, but won't work. Go to the Device Manager, right click on the entry for the wireless keyboard.
    Click on 'services'.
    It should bring up a single entry for keyboard/mouse HID services. Click this and press Apply or OK. After it installs, you should be golden.
    There are two issues here - one is that Mac OS seems to 'reserve' the Bluetooth device such that it won't pair correctly with any iteration of Windows while it's already paired in OSX. It works fine the other way around, however, so you need to make sure it's set up in Windows before Mac OS.
    Second, there's a Bluetooth driver issue in Windows 7 such that it won't pair with the keyboard - it'll run through the steps, but the keyboard itself will not appear to actually 'get it'. Switching to the Apple drivers briefly will ameliorate this and allow proper pairing, but to actually keep the keyboard working you should use the built-in drivers.
    Thanks again alrich68. Seeing the instruction worded in two slightly different manners, suddenly made sense. I now have the Mighty Mouse working as well! Work the first try!!
    Chock another one up for the user base being more inventive and imaginative than the Apple engineers!!
    I agree with other comments, that this solution SHOULD have been released as an official Apple Support post, and not having to rely on the user base to struggle with this problem to ultimately figure out a solution.
    BTW - for those who may think apple actually reads these posts, they typically don't unless someone calls in on Apple Care and points out the problem and posts to the support tech. The forum is USER managed. So, unless someone actually calls Apple Care or sends an offical http://www.apple.com/feedback/ post, Apple does not know what happens here.
    Anyway, thanks again!
    Ta

  • Byte Corseca BT Stereo bluetooth Headset Not working in windows 8.1

    Hi
    I m using Byte Corseca BT Stereo bluetooth Headset its working fine in windows 8 . when i get update from microsoft windows 8.1 its not working ..Please any one give me the solution.
    Thanks in Advance
    Ramesh M

    what is your laptop model?
    update your Bluetooth driver, in order to work with Windows 8.1 your Bluetooth driver need to be updated
    you can find updated driver from your manufactured site. I this Bluetooth comes with software, try to reinstall it
    Please also check if there is any important update driver for your laptop

  • VN7-791G bluetooth devices not working after Windows 10 upgrade

    After upgrading to Windows 10 on my 2 month old Acer VN7-791G, my Logitech bluetooth mouse could not pair, my bluetooth speakers could not pair and neither could by Nexus 7.  All these devices were working fine on Win 8.1 earlier. Under Device Manager, only the generic Windows Bluetooth, Microsoft Bluetooth Enumerator and LE Enumerator drivers were showing (dated  21/6/2006).  Under Network adapters, the driver showing was the Qualcomm Atheros QCA64x4 ver 10.0.0.62 dated 18/5/2015. I checked that this model is indeed compatible under ACER's website for Windows 10.  I have also been checking the ACER drivers for Win 10 for this model but there are no new updated ones for Bluetooth. I downloaded the Win 8.1 ones and installed them but they still would not work (the Microsoft ones are still showing under Device Manager). I had to actually downgrade back to 8.1 a few days ago due to this issue but thought I would try to update to Windows 10 again hoping it would work but still no luck.  I had googled but can't seem to find a solution and suspect that I need an updated bluetooth driver for Windows 10 from Acer or Broadcom.  The Atheros website do not have any Windows 10 bluetooth drivers as well. I may have to downgrade again and try again in a few months time unless someone could please point me in the right direction. Thank you.  

    Yay! Success at last!  Well, I had to resort to drastic measures which I was dreading and delaying. Basically, I rolled back to Windows 8.1 Then Reset PC to Factory Setting.  This wiped out all data and applications/programs After getting back to default Windows 8.1, I tried pairing my bluetooth mouse and it worked I then immediately installed Windows 10 (from ISO file downloaded earlier) off a USB stick I chose the option for a clean install (this doesn't load any of the ACER bloatware) Once logging into Windows 10,I went into Device Manager and uninstalled all Bluetooth drivers Then I ran the setup for the Windows 8.1 Atheros bluetooth drivers as suggested - "LITE-ON Bluetooth_M 3rd WiFi 2x2 AC+ BT M.2 QCA NFA344_3.0.0.373_W81x64" I tried pairing my mouse and Nexus 7 and it works!!! For reference, here is my setup under Windows 10 after successfully pairing bluetooth devices. btw, interesting to see that the event log still reports some error about further installation just like earlier - probably indicates that the Win 8.1 Acer drivers are not 100% compatible yet.     

  • Bluetooth Mouse not working in Windows 7?

    Just installed Windows 7 Ultimate 64bit on an iMac i5 with 20Gb
    Everything installed correctly and W7 boots fine, even did the drivers for bootcamp before the full Windows install
    Thing is I have the Apple slim Bluetooth Keyboard and Magic Mouse (that come with the iMac) it seems that the Mouse just will not respond??
    The keyboard is working?? on Bluetooth but not the mouse and as i dont have a corded one to hand i am trying to navigate the whole Windows with my keyboard!!
    please help how do i get Windows to see my Apple Mouse under bootcamp??

    my exp is that my magic trackpad unlike in osx require ment to click it before it turn on and begin to respond to touch
    but my bluetooth razer mouse don't work with blutooth so I connect it by usb which it also support could be that windows don't care for 2 bluetooth "mouse" input devices at the same time

  • Bluetooth software not working in Windows XP SP2

    Not sure why but when I install the latest MacBook Pro drivers Bluetooth is not installing.
    I can't see it in the Control Panel but the Device Manager has it listed as Working Properly.
    No where do I see where I can setup Bluetooth devices

    If you'll check out the Boot Camp Faq's, you will find this is one of several items not yet supported.

  • Satellite C650D-113 - WiFi driver not working on Windows XP

    The wifi-driver downloadable from Toshibas site is not working it seems, it installs as if it's all correct, removing the yellow exclamation mark from the device manage. But the "wireless network connection" icon that is supposed to appear in the network connections folder does not appear and this is where I am stuck.
    Or maybe it wasnt the driver, downloaded and installed the wireless lan client manager because there were no specific "wifi driver" to download.

    Yep, checked the fn+f8 before posting, and it's on. A new problem has arisen now aswell, the audio driver won't install with the message "ERROR: driver installation failed: could not find the MEDIA device for this driver." What gives?
    Edit: Allright, the driver from the link given worked, awesome, thanks! Only sound left that needs to work and I'm set. :)
    Message was edited by: linusb_89

  • Video Card driver not working on Windows

    Hi,
    I just finished installing Windows 7 through bootcamp just for Microsoft Flight Sim X. I used bootcamp to burn a disc with the updates and drivers and installed it. When I try to start the flight sim, I get: "Flight simulator is not working with your video card. Veryify you have the latest drivers installed for your video card."
    Any suggestions?
    Thanks,
    Glen

    64-bit is much much better handling today's system with the RAM graphic card memory and the rest.
    If not that I would have gone with 8 RP 64-bit as well which includes support for USB3, multiple monitors is much much better, and better self recovery and repair too, and feels like it has been tuned and optimized better than 7 performance wise.
    I don't see much use for 32-bit OS except on small 2-3GB systems and tablets.

  • ThinkPad T510: eSata External Hard Drive Not Working with Windows 7...

    Hey folks,
    My LaCie Quadra 1TB drive arrived on Monday and the Quadra disconnects 1 minute into any copy / move function using the eSata connection. The USB 2.0 connection works just fine, however, I invested the extra money in a Quadra specifically to take advantage of eSata connection and would like to get this working.
    I received the following from LaCie support:
    "...the issue with eSATA and large or small drives on Windows 7 is a known issue.  However, it is not limited to LaCie drives and we believe this to be a Windows 7 driver issue from Microsoft... using a third party eSATA card with its own drivers does eliminate the issue."
    So, before I spend another £50 on an eSata ExpressCard trying to fix something that should work out of the box:
    Any idea how to get my eSata drive working on my ThinkPad T510 or ThinkPad Mini Dock Plus Series 3?
    Does the ThinkPad Mini Dock Plus Series 3 eSata connector have its own drivers, as this - ideally - is where I'd like my external drive to be permanenelty connected.
    Kind regards,
    John Diddy

    Hi Bananaman,
    Nope. tried a new eSATA cable and the issues are exactly the same.
    LaCie recommend an ExpressCard with it's own drivers to resolve the problem. Trying to avoid this route as I intend to use the drive for regular backups and running virtual machines so it'll be used heavily and I'd rather not have a cable sticking out of the side instead of the docking station!
    Any further thoughts?

  • XtremeGamer driver not working with Windows 7

    I recently upgraded to Windows 7 and I can't get my XtremeGamer sound card to work. I've installed the latest drivers listed on your site and I still don't get any sound. Any thoughts as to what might be causing this problem? I've used the update manager to ensure my driver is fully up-to-date.

    I have been battling with this issue as well for several weeks now. I have gone as far as to try Windows 7 professional 64-bit, downloading the driver from numerous locations, reformatting the computer several times, and attempting to install it on an SSD as well as a standard hard drive. I finally decided to call Lenovo and just got off the phone with them... At first, the representative advised me that it was because I installed Windows professional 64-bit instead of the home premium version that came with the computer. I advised them that I was not willing to except that answer and that I disagreed with it (not to mention that at one point had it up and running with Windows 7 64-bit professional). The following response that I was given is to pay either $179 for ongoing support or to pay $90 for a one-time support issue. This is unbelievably frustrating the computer is not even six months old, I have never run into issues like this before, and let's just say this isn't my first barbecue so I know what I'm doing. Simply out of principle, I am now considering getting rid of this thing and going back to Asus... So tired of dealing with this garbage.

  • Touchscreen driver not working under Windows 8

    Installing Windows 8 on HP Touchsmart 520 is really a nightmare. The installation procedure of display driver and Voltron Touchscreen drivers usually produces error 9998. Weirdly, I succeeded in somehow working around this by using a different display driver (some beta-version from Intel), but this was buggy. Since reinstallation of Win 8 I cannot get the Touchscreen driver to install anymore. Given the fact that the Touchsmart series is selling on its Touchscreen capabilities and given the fact that HP relies on Microsoft OS it is not only mildly irritating that HP has so far not been able to supply device drivers that work well with Win 8 Release Preview. Which solution do you suggest ? Wait ? Go back to Win 7 ?
    This question was solved.
    View Solution.

    Sure, thanks anyway. HP sucks.

  • V570 video driver not working with windows 7 home premium 64 bit

    i have tried many ties instaling the video card driver from the lenovo support site for my v570, after install and reboot , blue dump screen appears and i've to restore the windows. so far i'm running without the vga driver. someone pls help to resolve this issue

    I have been battling with this issue as well for several weeks now. I have gone as far as to try Windows 7 professional 64-bit, downloading the driver from numerous locations, reformatting the computer several times, and attempting to install it on an SSD as well as a standard hard drive. I finally decided to call Lenovo and just got off the phone with them... At first, the representative advised me that it was because I installed Windows professional 64-bit instead of the home premium version that came with the computer. I advised them that I was not willing to except that answer and that I disagreed with it (not to mention that at one point had it up and running with Windows 7 64-bit professional). The following response that I was given is to pay either $179 for ongoing support or to pay $90 for a one-time support issue. This is unbelievably frustrating the computer is not even six months old, I have never run into issues like this before, and let's just say this isn't my first barbecue so I know what I'm doing. Simply out of principle, I am now considering getting rid of this thing and going back to Asus... So tired of dealing with this garbage.

  • DVD drive not working with Windows?

    Hi, I have a 20" Intel Core Duo iMac running Windows XP SP2 via Bootcamp.
    I tried burning a homemade DVD last night using several programs (Nero and DVD Shrink to be specific) and I was not able to choose the DVD drive as the target.
    When I open My Computer, it shows as a CD Drive?
    I know it at least reads DVD's because I've installed a few things using DVD's. And on Mac OSX it both reads and writes DVD's because I've backed up my stuff on a DVD-R before installing Bootcamp.
    So it appears that it just isn't writing DVD's on Windows XP.
    Is this a common problem or is anyone else having similar troubles?
    Thanks in advance.

    Hi
    I have the same problem with mine which is why I am searching this forum.
    Were you ever able to resolve this?
    Thanks

Maybe you are looking for

  • How to include xml file without embedding in flex web application?

    Hi I have a big XML file around 11 mb. I want to include this xml in my web application without embedding. So anyone have idea to include. Please suggest me any idea. Thanks

  • IPhoto 5 deleted my albums!

    I started iPhoto 5 for the first time today. Previously, I had all my pictures organized under a folder called "Albums," under the usual "pictures" folder. iPhoto 5 asked me if I wanted to transfer the albums to iPhoto 5, and I said yes. However, onl

  • Apex Notification plugin fire to specific users page

    i have IR page, how can i send the notification to specific user with particular row or any reference column value/heading.also revert back to creater with replied massage.these users are using same application with same IR page from LAN. What i did

  • Partner profiles and ports

    How to transport the configuration of partner profiles and ports from Development to Quality systems.

  • Blocksite does not block a bookmarked site

    I installed Blocksite to use it to block Facebook on my home computer. It works if I type in the URL in the text box. But, if I click on the bookmark on the toolbar for Facebook that was saved before I downloaded Blocksite, it does not block Facebook