Bluetooth in new Sequoia - does it work or not?

I was just wondering if anyone out there has a new Toyota Sequoia with built-in bluetooth AND a first generation iPhone with 2.0. I need to know if anyone can tell me with certainty if this vehicle will still connect with the iPhone's bluetooth after the 2.0 update or not (I know many car bluetooths have been disabled with the 2.0).
I ask because I have a friend who has not yet updated and she will probably die if she is unable to use the bluetooth in her car. I need to know if it will work before I help her update. Thanks in advance.

Just an update ... did the 2.0 update and it seems to still be working okay. (knock on wood).

Similar Messages

  • My IPad just froze when i was doing my work, its not responding now, i didn't hit it and it is brand new

    my IPad just froze when i was doing my work, its not responding now, i didn't hit it and it is brand new

    thank you so much, i just tried it and i worked.

  • Passive interface on a SVI, does that work or not?

    Hello all,
    At my office, I am trying to clean some of the routing table and fix some routing issues. We run eigrp for internal network. In one of the routers, eigrp neighbor relationship is through SVIs only. I'm actively trying to use "passive interface default" for all the L3 devices, and doing "no passive... " for the interfaces that are currently forming neighbor relationship. So, does that work the same for SVIs? Do I just do "no passive interface default int vlan XX" for all the SVI that are forming the neighbor relationship? will that work the same as for a physical interface? or do I need to track the physical ports that are actively using that vlan? I have looked around and haven't found a definitive answer. I would really appreciate some help.
    Thank you in advance.

    Disclaimer
    The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
    Liability Disclaimer
    In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
    Posting
    I know it works for OSPF, I would assume it would for EIGRP too, but cannot say for sure.

  • TS2097 I inserted a new DVD, it is working but not coming out. Whenever I try to eject it, it does not come out. Apple should provide us the easy and manual way to eject CD/DVD or?

    Hello,
    I inserted a new DVD in my mac book pro, its working and the drive is reading the dvd but unfortunately is not coming out. I have tried several ways mentioned on all over the net and apple community websites but nothing has worked so far.
    I need a easier and manual way to eject the DVD. Where is apple's help?
    Please help me. This is one of the weaknesses Apple should work on because it is causing us pain and loss of efficiency which is not apple's quality.
    Thanks

    Thanks for asking, actually I just found a trick on a website.
    It siad that restart MBP while holding eject button, I did it and DVD came out right away.
    I hope that this works out for everyone.
    But still there is a need for a manual eject system so that people don't worry about stucking the DVD or CD in th drive.
    Thanks anyway dear.

  • Bluetooth Handfree kit Parrot does'nt work!!!

    Hello everyone, I'm really ****** ... just bought iPhone4 OS
    4.1.
    Before I had 2G, and 3G, then 3G. I state that is not my
    particular interest to share files via bluetooth or another, but the only
    essential thing that made the previous iPhone was connected
    perfectly to any accessory. NOW NO MORE '!
    I installed a car kit Parrot CK3100. He always
    worked perfectly before, even with the latest update
    of 3GS os 4,0,1, was even ringing the alarm set
    iPhone, you can always read the phonebook, call list etc..
    Now, I try to connect the iPhone to the device 4, but sees no
    can in no way to connect, returning the message
    "Match failed." I tried in every way, even trying
    from the unit but nothing to match it.
    Can anyone tell me why these things happen and if there is a way to
    solve? Thanks.

    Yes, it is "Authorised". When Ovi Maps is in use and the Bluetooth connection is lost(you leave the car and take the phone with you, GPS stays in the car) you get the information "No GPS connection" from the Ovi Maps applications voice guidance. Then when you come back, the connection to the GPS is not made automaticly. You just get a popup on the phone where you can choose different bluetooth devices, including the external GPS. This should not happen, the connection should be made automaticly and then jus just continue navigation.
    If you choose the GPS from the popupwindow, it works but you get again the popup and it asks you for the device(at this moment you altready have the connection, but it still asks for it). You can again choose the GPS, but again the same popup will be shown..... if you choose cancel, you got no connection and the only thing to get it, is to close the program and start it again.

  • Targus Bluetooth Mini Optical Mouse - Does it work?

    Has anyone tried this with the Macbook and can confirm it works. Seems to be the cheapest bluetooth mouse out there.
    It doesn't officially support the Mac but I found this - http://www.macmegasite.com/node/1705
    Just wondering if it works on the Macbook.

    Yup, I believe they are.
    I read else where that a user that bought bluetooth mouse that comes with dongle bluetooth adapter, having a bit of technicall problem pairing using macbook bluetooth, and as soon as they plug the dongle into usb port, it detected and work nicely.
    Mike

  • New iPhoto: Does it work on original iPad?

    As far as I can see from the specs, the newly announced iPhoto works with the iPhone 4 and the iPad 2, but not the original iPad. Is that correct? If so, why?

    Well this page
    http://www.apple.com/ipad/from-the-app-store/apps-by-apple/iphoto.html
    says this is the case.
    Why? Who knows? Only Apple can say for sure but it may have something to do with the original iPad not having the power to run the app.
    But to be sure, you'd need to ask Apple.

  • Our Audition 3 is apparently no longer able to "register" through the regular channels. Adobe registration sent me here for info, saying it was a CS 2 product. Just putting it on a new machine, doing forensic work, not on line.

    Registration lady implied there is a work around for re-installing/activating Audition 3.

    See - Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3 - http://helpx.adobe.com/x-productkb/policy-pricing/creative-suite-2-activation-end-life.htm l

  • Mini DisplayPort to DVI and VGA - Does it work or not?

    I have just received my new aluminium MacBook Pro, and I think it is awesome. I can even get over the fact that it lacks the full-size DVI connection like the old one has just because it is so nice and shiny. I do need it to work with both DVI and VGA displays though, so I know I will need to buy an adaptor.
    My question is: If I buy either the mini DisplayPort to DVI or the dual-DVI adaptor from the apple store, will either one of them work with a DVI-VGA cable? I have heard so far that the single-DVI adaptor does NOT support the VGA pass-through, but would like some confirmation. Even if it is cheaper to buy both the DVI and VGA adaptors I would prefer the dual-DVI adaptor as long as it can do VGA as well, because one adaptor is better than 2.

    As far as I know daisy chaining adapters will not work for the MiniDisplay port. http://discussions.apple.com/message.jspa?messageID=8300784#8300784
    You will need to buy both adapters, the MiniDisplay to DVI and a MiniDisplay to VGA. I would also suggest you voice your opinion at http://www.apple.com/feedback/macbookpro.html and let them know how you feel about needing to purchase an adapter when one should be included with the computer purchase.

  • Webi 4.0 Passing parameters - how the heck ! does it work or not ?

    dear all
    i am knew to all this, quite capable of reading manuals, and an ex ABAPer in SAP.
    but when it comes to trying to pass a single parameter to a Webi report, based upon the new open document v4.0 syntax, it has finally got me.
    it seems i am not alone either.
    this works, and opens the webi with the full contents
    http://localhost:8080/BOE/OpenDocument/opendoc/openDocument.jsp?iDocID=AXofXym2kBRLuR4NwFiMPwo&sIDType=CUID&sType=wid
    i have tried both, a "new parameter" and a universe parameter, based upon my dimension "State", with no such luck on the underlying webi query filter.
    i thought i would only have to add "&lsSState=VIC" (no including the quotes), for it to filter my records for the state Victoria (no points for guessing where i am). But no. I still get all the same old records.
    then i tried *District=VIC", still the same old records without applying the query filter.
    so what am i doing wrong ! please ! help !
    thanks

    finally, here's the deal
    the opendocument 4.0 documentation is wrong. the parameter values are separated by at semicolon, and not a comma. also, do not put square brackets around them.
    this works
    u2022     lsMpmDistrict=NSW
    u2022     lsMDistrict=NSW
    u2022     lsMpmDistrict=NSW;SA
    u2022     lsMDistrict=NSW;SA
    this does not work
    u2022     lsMDistrict=[NSW],[VIC]
    u2022     lsMDistrict=[NSW];[VIC]
    if only the documentation explained it properly, i would have saved hours of time.

  • Does setQueryTimeout work or not?

    We're using oracle 8i on windows nt with the classes111.zip jdbc library. If I lock a table and then my code tries to update it, my query hangs even though I've set the query timeout to 5 seconds.
    I've read in several discussion groups that there is a problem with the setQueryTimeout method, but there's no bug reports on it.
    Is this a known problem, should we suspect our code, or what?

    There is a known bug with query timeout that results in the driver leaving dead threads around. Other than that, it does work in the 8i drivers.

  • Ipod from pawn shop, wont register in itunes...does it work or not?

    I had an ipod (2nd gen) but it got wet. I have a bunch of songs in my itunes and just purchased a ipod (1st gen) from a pawn shop and want the songs from my itunes to be put on the new one. Im alittle confused about clearing the songs off the old. Also when I plug the new one in, It doesnt want to open itunes or have any response whatsoever on my computer. Please comment with any help.
    thx hidd

    Can/Does the iPod Shuffle still retain a charge?  In other words, when you remove it from the charger does it power on still?  If not, it's a likely sign that the battery is shot and in need of a replacment, especially considering the age of the device.
    B-rock

  • Synchroniation - does it work or not?

    I have a Skype client (latest) with some history. I'm installing new client onto another PC. History is syncing very, very partially. It does sync only for recent contacts and not more than for a month. Some of recent contacts sync only when I mark them as unread, not more than a last month also.
    Is there something to do with that?

    Only the latest about 30 days chat history is saved on Skype Network (The Cloud) and synced to Skype on new devices.

  • SynchNotification - Does it Work or Not

    I have read three places on this forum about SynchNotification - seems like a great concept.  However, when the procedure is put into place, it is never executed by the Synch Manager (though it has two lines showing it has started and completed the procedure).  Please confirm whether this procedure does or does not work.  If it does not work, do you happen to know if it will be fixed in a future patch?
    Thanks

    I'm not sure of the details in the other posts but if you create a stored procedure called "SynchTransaction" in the WebTools database it should get called at the very end of the synch process.
    I just created one that simply inserts a record into my TransactionQueue and it did as expected. If the synch crashes and doesn't finish then that call will not be made ... so I guess some of those timeout errors may prevent it from being called. Essentially, if you see the message "Starting SynchNotification." then it should be called if it exists.
    Here's my stored proc:
    CREATE PROCEDURE [dbo].[SynchTransaction]
    AS
    INSERT INTO TransactionQueue
               ([ObjectType]
               ,[NameSpace]
               ,[TransactionType]
               ,[KeyFieldNames]
               ,[KeyFieldValues]
               ,[TimeStamp]
               ,[SynchStatus]
               ,[SynchError])
         VALUES
               ('STEVE',
               'netpoint.api.fulfillment',
               'X',
               'Start',
               'End',
               GETDATE(),
               'None',
    Edited by: Stephen Vineham on Feb 26, 2010 6:00 PM

  • VIDEO: Does it work or not? Please explain how to find it/use it!

    Does anybody have the video feature functioning??
    Please post a screenshot of the video feature on your phone.
    To take a screenshot on the iPhone, presss sleep button and home button at the same time.
    THANKS!

    You can only record videos on the new iphone 3G S which you can by in the Apple store or at an AT&T store, sorry i was hoping they would have video function for the 3G but they don't.

Maybe you are looking for

  • Want To Use Motion 3 for :30 sec. Spots

    I'm trying an experiment. I'm creating an entire :30 sec. TV spot in Motion 3. Since I have a beefy system, I figured why not, it may speed up my work flow. I'm surprised to find Motion struggling to play back fairly simple layouts. Better when I use

  • Print button

    Hi Experts, Can you please take some time to tell me how to add the print button to a view/page. Thanks !!! Anand

  • How can I set a specific user log on neme to a specific machine

    Greeting, I have a question :  How can I set a specific user log on name to a specific machine. e.g.  Only User.A can log on to PC.A and the other can not. Base On : Windows Server 2003 Active Directory Version : 5.2.3790.1812

  • How old is test/dev environment?

    Hi, How can I check, How old is test/dev environment which was cloned from PROD in past. by the creation time of control file? Thanks

  • I can't open example report test.rdf

    When execute the example report in the demostration page, I get this error: REP-110: Unable to open file 'test.rdf'. REP-1070: Error while opening or saving a document. REP-0110: Unable to open file 'test.rdf'. Any idea? Thanks.