Bluetooth issue in ios 7.1

I am facing the Bluetooth issue in ios 7.1 iphone.In ios 7.0 it works fine without any problem.I am using the EA framework for reading/writing the data in my application.Still I have not got any correct solution for this scenario. I am having a doubt that this issue is happening as because of EA framework which I am using it or do i need to change any settings.Could someone tell me the solution for this problem?

1.I am using an external Bluetooth kit by which I will send the command through my iphone application.I will communicate with the external Kit through a command that writes and reads the data using External Accessory framework.In lower version except IOS 7.1 i was able to communicate properly without any issues.In EA framework implementing a delegate method I could able to write/read a data.
2) Right now I am facing an issue only in ios 7.1 where I was not able to read any data from the external Bluetooth Kit.I have researched regarding this issue in all the sites I got to know some information that because of EA framework issue in ios 7.1 where I am able to communicate.But still I have a confusion that its happening because of EA framework or any other ios issues.

Similar Messages

Bluetooth issues with IOS 5.0 and Volkswagen

Ever since 5.0 came out my VW bluetooth connects ok in the car however when you leave the car ,the volume on the ringer stays at two bars and is almost inaudible. There are also playback issues at times of music when connected to VW bluetooth in that the volume stays at zero volume and i have to turn it up to hear the music. The ringer volume problem is the most annoying as it causes me to miss calls. Is anyone working on this?

Great news everyone!!! I installed iOS 5.1 beta on my iPhone 4 and the volume Bluetooth problem is gone!!!
For most unless you are in the Apple iOS developer program you won't be able to install it yet but once it's released the problem should be fixed.
Something to note.. I did have to turn the volume up once after it connected to my 2012 VW GTI. Since then it has stayed where I put it and I couldn't be happier.
Not happy with how long it took to get resolved but nonetheless happy it is resolved. Let just hope it stays resolved when it goes public.
~Sara

IPhone 6 BlueTooth issues with iOS8

Ok here is my findings:
Tried 2 iPhone 5 units before iOS8 and no issues with Bluetooth (1 I had for 2 years and no issues in my car). Once updating to iOS8 the bluetooth didn't work well at all for phone calls but music connects fine. Strange issues with the unit automatically start dialling but not able to cancel call until you disconnected bluetooth.
Also incoming calls ring but unable to answer and seem to lock up so you have to disconnect bluetooth to hang up.
I tried everything listed in the forums here and what the Apple reps told me. It works for a short while until the phone gets turned off or synced with iTunes. Now I have a new iPhone 6 with iOS 8 and it worked initially before I started setting things up.
I did not restore from a back up, I started as a new phone. Once I installed all my apps (Not in iTunes, rather manually over the air) and changed settings on the phone (not sure if it because of changing settings or turning the phone off) it would not connect to bluetooth in my car anymore, well it does just for music. I have tried my wife's iPhone 5c and it seems to work fine with my bluetooth so it definitely has nothing to do with my vehicle.
Apple there is a definite issue here. Stop telling me and other people to contact my car manufacturer to fix the issue. It all worked fine before iOS 8. Something needs to be done ASAP or I will be returning my phone and jumping ship to an Android or Windows phone as much as that may pain me. I have been a loyal Apple customer for the last 7 years. If this is how you are going to treat me and other loyal customers, you will not keep us for long.
I am hoping someone from Apple is reading this. If so I am expecting to be contacted. We expect a resolution fast!

I had same Bluetooth issues with iOS 8 on my iPhone 6; no phone/no music streaming although showing as "connected" with my 2 vehicles (VW and Audi).
Apple telephone technical support team solved issue with both cars as follows:
1. Delete the phone from handsfree memory in the Bluetooth car settings.
2. "Forget" the handsfree device (car) in the iPhone Bluetooth settings.
3. Reset ALL settings in iPhone (not just network settings)!!
(note: I had to reset ALL settings twice in a row for this to work.)
It worked in both cars! (Hope it stays working.....?)
You will have to reset wallpaper, and most other settings, as well. Certainly worth the trouble to get car Bluetooth up and running properly.
Good luck.

IOS 4.3 still did not fix the bluetooth issue

I am still unable to pair up my bluetooth stereo headphones with my iPhone 4. I originally had it paired up back when my iPhone 4 was running 4.0, but ever since iOS 4.2.1, I've been unable to pair up anything with my bluetooth. Does the Apple Corporation even look at these posts? Anybody else having bluetooth issues?

Actually, I would be very surprised to find out that Apple does not read these forums. A smart company would monitor discussion about their products, especially on a sight they sponsor, to gain insight on how to improve their product and or customer service. However, you should always file your complaint through the proper channels. I have had a few minor glitches between my iPhone 4 and my Jawbone Icon but things seem significantly better...so far. It just angers me that Apple has not admitted to any kind of bluetooth connectivity problem. This experience has completely tainted any kind of positive experiences from my iPhone 3G. I'm very likely to try a Droid or Blackberry when I upgrade again.

8.2 iPhone 6 + bluetooth issue

Up until 8.2, my bluetooth connectivity with my VW Passat was just fine. I could stream music, make calls using the steering wheel controls, etc. When a call came in, music would cut out, caller id would show on the phone and I could answer the call using the steering wheel controls.
This worked for my iPhone 4, iPhone 5 and iPhone 6+ up until this latest iOS update (8.2)
Now, when a call comes in, my car will ring, the phone stays with a black screen. After 2 rings, my iPhone 6+ begins to ring and the caller id shows. If I was using the music app, the music will cut out when the phone rings (as it should), but as soon as the phone is answered, the music begins playing again over the call.
I can no longer make a call using the steering wheel controls. After saying 'call' then the name, the car disconnects the phone. Again, this has never happened with any of the iterations of iOS with iPhones and this car up until 8.2
I can, however, make calls using the iPhone 6+ and Siri, using the car speaker and mic.
I've noticed other glitches in iOS 8 (all versions) but this bluetooth issue is most annoying and dangerous. It has now removed Hands Free from my car and forced me to use the handset if calls are made or come in.
Has anyone else seen similar issues on 8.2? I've cleared the Bluetooth settings and restarted the phone many times and I can't seem to get it to work correctly.

Yes, I have exactly the same problem with all our VW & Volvo at work. iOS 8.1 iphone 6 & 6+ Bluetooth 4.0
now, we have bought some other smart phone with latest 4G+ technology : no more problems good connectivity
we used old iphone 4 with iOS 5.1.1: the Bluetooth connectivity was fine, but no 4G+!!
by by apple

N200 bluetooth issue

Hi, on start up (with vista) it keeps saying "Windows needs to install the software driver for Bluetooth Periferal device", I selct "search and install driver" but after looking everywhere it keeps saying that windows was inable to find the driver and thus, the hardware will not work properly, however, I am able to use the bluetooh as I've copied files form and to my nokia n73 via bluetooh with no problem at all, any solutions for this problem (that's kinda annoying by the way) thanks!!

1.I am using an external Bluetooth kit by which I will send the command through my iphone application.I will communicate with the external Kit through a command that writes and reads the data using External Accessory framework.In lower version except IOS 7.1 i was able to communicate properly without any issues.In EA framework implementing a delegate method I could able to write/read a data.
2) Right now I am facing an issue only in ios 7.1 where I was not able to read any data from the external Bluetooth Kit.I have researched regarding this issue in all the sites I got to know some information that because of EA framework issue in ios 7.1 where I am able to communicate.But still I have a confusion that its happening because of EA framework or any other ios issues.

Cannot remove bluetooth devices in iOS 8

In bluetooth settings, I am trying to remove a bluetooth device using iOS 8 on an iPhone 5; however, when I select the device, "Forget This Device" is greyed out and unavailable. I have done some searching and found that this can happen with jailbroken phones, but mine is not jailbroken. I now have two devices that are in my iPhone bluetooth settings that have this issue: my iMac and my iPad.
Anyone else seeing this or knows of a fix?

I just found a solution that worked for me by disabling Handoff in both my iMac and my iPhone.
For OSX:
System Preferences → General and scroll down. Uncheck Allow Handoff between this Mac and iCloud devices
In iOS:
Go to Settings → General, scroll down and turn off the switch for Enable Handoff
I was then able to select forget for the desired bluetooth devices, and then switch Handoff back on.

IPhone 4: Since iOS5 Bluetooth issues when connected to car hands free and audio system

Hi @ all,
this discussion is either a kind of "warning" for those who hadn't yet updated to iOS 5 and a beg to Apple for fixing the issue:
Obviously the iOS 5 does have some problems with VW and Ford (germany) modells equipped with handsfree and audio systems (googling a little bit resulted in many, many complaints in german discussion forums about it). Unfortunatelly I'm facing these problems now too:
Issue 1:
When the iPhone is connected to the audio-system of the car via Bluetooth, the Audio Slider on the iPhone doesn't work any longer. The only thing that it is capable to do is, if you slide it completely to the left, which results in switching the audio completely off.
Issues 2 (much more annoying):
When the iPhone is connected to the handsfree system of the car, the ringtone volume is obviously set to "off" or at least "extreme low". This doesn't harm when using the phone with the handsfree since the ringtone still is coming from the cars loudspeakers. But as soon as you leave the car and the bluetooth connection is disconnected, the ringtone audio on the iPhone is STILL set to "off". Means: Each time, when you leave your car, you have to increase the ringtone volume manually.
Issue 1 is more a "not nice" or a "OK, it's first release" bug. But issue 2 would have been a reason for me to wait for upgrading to iOS 5, since I'm using my iPhone as a business tool and am quite frequent on travel.
To verify that I hadn't had a bug when upgrading for the first time my iPhone, I completely set my phone back to factory default, put it in maintenance mode and re-flashed it completely anew using iTunes. I only performed minimal setup to make sure, nothing else could cause this. The issue still remained, therefore it was clear to me, it is iOS 5. I never had any of these issues with iOS 3 und 4. A probable "workaround" would be a downgrade, but this doesn't work, as known, either.
@ Apple Engineering: Please fix this as soon as possible!
Cheers,
Frank

Good question... I haven't found a "reliable" way of sending constructive(!) Feedback to those at Apple who really care. I remember the beginning days of Mac OS X, when the reply-link was even on top of the dock.
Maybe I'm just not aware of working feedback channels, I only can hope that some of Apple's people with "influence" read statements like this...
Cheers,
Frank

Have had to re-pair all Bluetooth devices since iOS 7

It seems that I've had to re-pair all bluetooth devices with my iPhone and iPad since upgrading to iOS 7. Was this expected or is there some issue with iOS 7 that is affecting existing bluetooth pairings?
Has Apple posted any knowledge base articles on this yet?
Thanks,

WiseJD's comments are fascinating to me, because I had the opposite situation. My iPads, with which I have never used Bluetooth, both came up with Bluetooth "On" after updating to iOS 7. I was surprsed by this.
As I recall, my iPhone also had Bluetooth on after the upgrade.
By the way, I also have a Lexus and can report no pairing issues since the update.

IPhone 4: Bluetooth Issues - Hands Free Phone in vehicle

All,
This is my first Apple post. I usually go out and Google and find/figure things out on my own, but I am stumped!
I recently upgraded my wife to an iPhone 4 16gb Black from an iPhone 3GS 8gb. With the 3GS, we were able to pair the phone with our 2011 Toyota Highlander with bluetooth capability, giving me nearly 9 month pregnant wife the ability to stream audio to her stereo, but more importantly she was able to make/receive calls in her car using the hands free.
We were able to go through the setup like we did with the 3GS to pair it. It pairs up just fine. However, the only thing that works is the audio streaming. She cannot access the phone for calling/receiving calls with the vehicle. When a call comes in, I remember the 3GS having a bluetooth headset option that showed up, but as long as the bluetooth was on in the car, the stereo would automatically pick up the call and she could talk to the car and hear the call through the speakers.
I have read that the iPhone 4 had bluetooth issues with older IOS versions, but she is on 4.3.3 currently. Again, audio streaming her music works, just not the phone. What gives?

Hey Shane!
You could always try going to Toyota and see if there is a firmware upgrade available for your car. Even though your car is new, there are always firmware releases available.
New Phones don't always work with older firmwares in new Car Stereos. With Technology changing everyday you want to make sure your always update on all devices involded.

Keynote remote will not pair with ipad after update to 10.7.2-bluetooth issue or remote app issue?

Noticed keynote remote will not pair after updating. Bluetooth light flashes a couple of times then goes off. I'm wondering if it's a bluetooth issue or a keynote remote app issue.
Any suggestions or remedies?
thanks

Then again, it may not.
I've tried all the things recommended in the Apple KB article, and it doesn't work. Mulderscully is right, in the recent iOS 5 upgrade, Bluetooth is not turned on (at least, its symbol is not visible) from within Keynote even if you turned it on in the Settings menu. Posts in another thread recommended using another app to establish a Bluetooth connection between the iPad and iPod (I used Touch Rummy), then switching back to Keynote and Keynote Remote. This does work for me, but it is an awkward workaround. Shouldn't 'It just work'?

Iphone 4s bluetooth connection after IOS 8.0.2

Have updated my iPhone 4s to IOS 8.0.2 the Bluetooth connection with my car is no longer, I have reset bith, deleted both re-paired both.
It can see the car Bluetooth just no longer makes it its first preference, with every phone call whilst in the car I have to manually select the car hands free.
this is not satisfactory as before the update it worked perfectly better than perfectly!

Hi Jimbig77,
Welcome to Apple Support Communities.
Take a look at the article linked below, it describes a similar issue and provides a resolution that may work for the issue that you’re describing.
Get help connecting your iPhone or iPad to a Bluetooth accessory
If that doesn’t do it, this article provides a lot of additional information and troubleshooting suggestions that'll resolve most Bluetooth issues.
iOS: Troubleshooting car stereo connections
I hope this helps.
-Jason

Bluetooth issues w/ IPhone 6 & Chevy Traverse

I Had the iPhone 5 and my Bluetooth worked great in my Chevy traverse. Now that I have the iPhone 6 I am experiencing constant issues with the Bluetooth and traverse functions. The phone number shown on incoming and outgoing calls does not match the actual number, the vehicle buttons don't answer incoming calls, the Bluetooth connection seems to drop after you make the 1st call once connected (2nd call made requires disconnect and reconnect to work). Is any one else experiencing Bluetooth issues with their vehicle or with the Chevy traverse? Anyone know how to fix these issues?
thanks,
Robert

Hello Rjshimanek3,
I have an issue with bluetooth on iPhone 6 Plus not working properly with my car as well. My iPhone 5 worked fine with the car. My iPhone 5 used to have iOS 7.1 and it worked. I upgraded my iPhone 5 to 8.0 (a few days before iPhone 6/6+ available in the store) and it also worked. Now my iPhone 6 plus did not seem to work with my car BT properly. If I play music, I can hear the sound through my speakers. However, when I placed a phone call using BT in the car, it dialed out but as soon as the call is connected, the audio source (as seen from the iPhone 6 plus screen) switched from car BT to just "iPhone". Most of the times now when I tried to connected my iPhone 6 Plus to the car BT, my car menu is frozen like the phone is dialing out, which it is not doing. So I have to turn off BT of the iPhone 6 Plus in the car.
Here are a few things that I tried
> I tried to delete the bluetooth device from my car and repaired it and it did not work
> I tried to reset network settings from the iPhone 6 plus and repaired it with the car BT and it did not work
> I tried to restart the iPhone 6 plus and repaid it with car BT and it did not work
> I upgraded iPhone 6 plus to latest iOS 8.0.2 and it did not work with my car BT
> I tried my iPhone 6 plus on another car (same make though, different model) and similarly can't make phone call and car menu frozen with "dialing" on the screen.
I would like to try my car BT with another iPhone 6 or iPhone 6 + which I don't have so I can see if it's my particular iPhone 6 plus or the car. At this point, I am thinking.
I'd like to hear if others are having issue with Bluetooth on iPhone 6/6+
thanks

Bluetooth - SerialPortProfile in iOS?

Hello,
i found a interesting bluetooth modul which allows a connection to iOS-devices.
http://www.connectblue.com/products/bluetooth-products/bluetooth-modules/bluetoo th-iphone-ios-accessory-module-obs414/
The description says:
"iPhone/iPod touch/iPad connectivity:
• Supports SPP/PAN Bluetooth connection with iOS devices"
... but the official Apple-Note says that SPP is not supported by iOS.
http://support.apple.com/kb/HT3647?viewlocale=en_US&locale=en_US
I know that i have to be in the MfI-Programm to use this moduls correctly.
Dear Developers, is the SPP-Profil really supported by iOS?

1.I am using an external Bluetooth kit by which I will send the command through my iphone application.I will communicate with the external Kit through a command that writes and reads the data using External Accessory framework.In lower version except IOS 7.1 i was able to communicate properly without any issues.In EA framework implementing a delegate method I could able to write/read a data.
2) Right now I am facing an issue only in ios 7.1 where I was not able to read any data from the external Bluetooth Kit.I have researched regarding this issue in all the sites I got to know some information that because of EA framework issue in ios 7.1 where I am able to communicate.But still I have a confusion that its happening because of EA framework or any other ios issues.

Iphone 5 issues after IOS 8.2 update: my husband's phone and my phone get the same phone calls ONLY when we are home. Any suggestions on where to look to fix this?

Iphone 5 issues after IOS 8.2 update: all the iphones in the house receive the same phone calls ONLY while we are at home. Any ideas on how to fix this?

That is a new "feature" described in Connect your iPhone, iPad, and iPod touch using Continuity
You can turn it off by going to Settings > FaceTime and changing "iPhone Cellular Calls" to off

Bluetooth issue in ios 7.1

Similar Messages

Maybe you are looking for