Bluetooth Macbook Pro Retina Won't Respond or Turn Off

I have a wireless trackpad paired to my Macbook Pro Retina via bluetooth. This has been working fine for a fair few weeks up until the last few days when the trackpad stops working and starts searching for bluetooth, but my bluetooth says it's on. I try to turn off the bluetooth on the Macbook and it will not turn off. It just freezes and stays "on" but not working. In addition, every time I try to access the bluetooth settings, everything on the setting page works except for the "turn bluetooth off" button.
The only "fix" I have found so far is to restart my computer which is a huge hassle. Anyone else with this problem or know how to fix it?

A couple of things to try,
SMC reset:
Follow directions for a battery you should not remove yourself
You may have to reset some of your prefences after this, including the BT set up, as this "flushes" out the set up which may have become corrupted somehow.
If no joy post back, there are a few other things to check.

Similar Messages

  • My new macbook pro retina won't connect to my iPhone 4s via bluetooth

    Just bought macbook pro retina. have had iPhone 4s for two years and use it to tether my iPad to regularly no problem. however the macbook pro won't connect to the iPhone via bluetooth. it recognises it's there and a connection code is displayed, but when I enter the code it won't connect and the phone insists that I agree to 'forget this device'. how do I enable tethering so I can use the 3g signal to browse on my laptop whilst travelling please?

    Only thing I could suggest would be to "Reset Network Settings" on the phone (Settings> General> Reset>) . Of course, this will forget and delete any saved Wi-Fi or network configurations, but if that's not a problem for you then, maybe worth a shot.
    Although saying that, I think iCloud remembers old settings (if you are connected and sharing network configurations), so may not be a total loss.

  • MacBook Pro Retina, won't boot with USB3 attached.

    Enjoying my new computer(ofcourse), thought i ran into a troublesome problem:
    I plugged in Flashdrive 2, restarted and starting to hold alt to get into the boot menu.
    But it never showed up(tested for about 5min), the screen showed up in gray, but then no more action was seen.
    I pulled out Flashdrive 2 and had to hold the power key for a hard stop.
    Then started the computer as normal and the boot menu showed up just as normal!
    I repeated the process but with Flashdrive 1.
    And the very same course was repeated.
    Again I repeated the process but with Flashdrive 3 (with the very same ISO on it).
    The install of windows succeded without any problem at all!
    Note: When booted up in OSX i can read and format all the drives wiihout any type of error.
    Computer: MacBook Pro Retina; RAM: 8gb, SSD: 256gb. MacBook Pro and Air Update 1.0 Installed.
    Flashdrive 1a: Corsair Flash Voyager 8GB USB3; Ubuntu, bootable.
    Flashdrive 1b: Corsair Flash Voyager 8GB USB3; Empty
    Flashdrive 2: Corsair Flash Voyager 8GB USB3; Windows 8, bootable.
    Flashdrive 3: SanDisk 4GB USB2, Windows 8, bootable.

    Intel-based Macs: Resetting the System Management Controller (SMC)
    But you may want to take it in to an Apple store as this type of thing should not happen on a New computer.

  • Macbook Pro Retina won't drive HDMI out

    So I was talked into the new MacBook Pro Retina in place of a new Mac Pro by the guys at the Apple store.  I told them I needed to drive 4 displays and they assured me the MBPr would do that.  2 from mini display ports.  1 from HDMI and it's own display.  Fair enough.
    Only, the HDMI out seems dead.  I am running two Dell monitors on the mini display to DVI connectors.  I am trying to run a 3rd Dell monitor on HDMI to Disply port but am getting no signal.  None.  Nada.  After a few seconds the monitor tells me there is no signal from the computer and it shuts down. 
    I have seen a lot of other issues around the HDMI output.  Anyone know the status?  Has Apple bugged this?  Is there a fix in the works?

    Try with just the HDMI external; display. I would suspect the HDMO cable if this test does not work. Tray a new HDMI cable. If the new cable does not work, take the computer to an authorized service center. There is no "bug" using HDMI to an external monitor.

  • MacBook Pro Retina won't wake after after sleeping!

    On most occasions after my 13" MacBook Pro Retina  has been put to sleep (by closing lid or pressing Power  button) overnight  it will not wake up again until I have reset the Systems Management Controller.   Opening the lid, or Power button or Space bar still leaves a black screen.
    My wife's new 11" MacBook Air suffers similar problems even after our local Apple Store reinstalled Mavericks in an attempt to resolve the problem..
    Any thoughts on a solution would be gratefully received - thanks.

    Mac Pro is not the same as the notebook MacBook Pro
    More Like This - from side bar
    Re: my 2012 macbook pro takes forever to wake up after sleeping overnight
    Re: Retina MacBook Pro hang time on wake.
    Re: Retina MacBook Pro wont wake from sleep
    Re: Retina Macbook Pro Freezes after sleeping...
    Re: Macbook pro retina crash when wake up from longtime sleeping

  • Is it safe for my MacBook pro retina plugged in while it's off?

    Hello Everyone, so I have read that putting your MacBook pro in sleep while plugged in all the time is safe as long as you run the battery once in awhile, but what about if I want to shut down my MacBook pro Retina off without unplugging the charger and just leave it on for the rest of the night and then just turn my macbook pro back on still without unplugging the charger? Is it safe, no KABOOM!!? Lol ok I'm going to sleep now and I will turn off my Mac and unplug it for now until further instruction. Thanks in advance and good night!

    you can leave it plugged in - when fully charged - charging stops to avoid overcharing your battery.
    do not fully discharge your battery to 0% constantly, doing so will shorten your battery life.
    good luck

  • My MacBook Pro Retina won't turn on! Yesterday I installed the new updates.

    So it's fully charged. I used it without any problems last night, then shut it down. This morning when I tried to turn it on, it won't. I have Lion installed and am up to date with all of the software updates. There is a green light in the AC adapter. What should I do??

    I know this post is from back in September of last year, but I wanted to comment for posterity to say what worked for me with my July 2012 retina MBP refusing to turn on. From the link preludio posted above:
    Use the "Resetting the SMC on portables with a battery you should not remove on your own" method (ie., for all Macbook Pros early-2009 and later). Worked perfectly for me:
    Plug in the MagSafe power adapter to a power source, connecting it to the Mac if it's not already connected.
    On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
    Release all the keys and the power button at the same time.
    Press the power button to turn on the computer. 
    Anonymous34 wrote:
    So it's fully charged. I used it without any problems last night, then shut it down. This morning when I tried to turn it on, it won't. I have Lion installed and am up to date with all of the software updates. There is a green light in the AC adapter. What should I do??

  • MacBook Pro: Keys won't respond

    On my MacBook Pro, two of my keys won't respond: the "1" key and the "delete" key. I looked under them and it is clean. Can it be fixed/repaired/replaced?

    1. Reset PRAM.
    2. Reset SMC.
        Choose the method for:
        "Resetting SMC on portables with a battery you should not remove on your own".
    If this does not help, contact Apple.

  • My new macBook Pro Retina won't connect to my wifi.  Password IS CORRECT.

    I just got a new-in-box retina MacBook Pro.  It sees my wifi network--signal is max--but the base station will not accept the 100% correct password.  Other devices have no trouble connecting.
    I'm setting it up for a PC switcher.  What an embarrassment!
    We're trying to connect to a Time Capsule base station which I added to my system last week.  No other devices have trouble connecting.

    -->Try Connect to Other.
    Done.  Failed.
    -->Try clearing the preferred network.
    If I understand you correctly, there is no preferred network.  It's a new machine, it's never connected to anything.
    -->Please update your signature with your installed operating system for the questionable MacBook Pro, or indicate what Mac OS X version you are running, so we can tell you if there are additional things to look for.
    Thanks for alerting me to this. I added some more stuff to my sig.
    It's a new Retina MacBook Pro, running Mavericks 9.0.  I just unboxed it this morning.

  • MacBook Pro Retina won't install windows 7 64bit

    Hi guys, i'm tryng to install windows 7 64bit but no success till now. I'm using an updated version ( service pack 1 integrated) when windows loads i can't install it on the bootcamp partition because it says"windows needs an ntfs partition to install" . Then i cancel that partition, create one new ntfs one, and try to install.... then windows tells me "Impossible to create a new system partition or locate an existing system partition. For further information, look at the program's registry files"
    It seems to be an error caused by a defective driver of the controller of the hard disk.... so the controller of the ssd. Or is it something else? how can i install windows via bootcamp on the new macbook pro with retina display?

    you format the FAT/MSDOS to NTFS inside the Windows installer.
    Windows installer: Advanced Options tab.
    You don't create, you just use the one "BOOTCAMP" that was created by Boot Camp Assistant.
    create a Windows support software (drivers) CD or USB storage media
    The Boot Camp Assistant can burn Boot Camp software (drivers) to a DVD or copy it to a USB storage device, such as a flash drive or hard drive. These are the only media you can use to install Boot Camp software.
    Installation Guide  Instructions for all features and settings.
    Boot Camp 4.0 FAQ  Get answers to commonly asked Boot Camp questions.
    Windows 7 FAQ  Answers to commonly asked Windows 7 questions.

  • Help: Macbook Pro Retina won't boot past Grey screen w/ Logo

    My computer died last night with each application not responding. I couldn't shut down normally so I held the power button to turn it off.
    Next morning, I tried to boot the MacBook Pro and the boot process stalled at the grey screen with the Apple Logo and spinning wheel. I let it go for an hour and there was no change on the screen. Based on Apple's help desk I ran Hardware diagnostics (extended with looping disabled) and got the following error
    4HDD/11/40000000: SATA (0,0)
    The screen shot is below
    I ran this again with standard testing (no looping) and standard with looping and all gave the same results.
    Any ideas? The compute will not boot.
    Thank you

    That's what I thought but was able to do CMD-R and verify/repair permissions the disk. My hard drive is actually a flash drive so I'm guessing the controller or motherboard.
    I do have it backed up with the last 24 hours ago.

  • Macbook Pro (Retina Early-2013) will not turn on

    I plugged my iPhone into my computer and was going through the process of syncing my music when my MacBook Pro just powers down completely. I've been unable to turn the computer on since then, following the Apple trouble-shooting process.
    Interestingly, when I do a SMC reset, the LED color on my MagSafe charger will change to green and then back to orange, leading me to believe that it isn't an issue with either the connection to the power button, or with the logic board itself. In spite of this, no boot-up sounds, no LED lighting up on the Caps Lock button, no nothing.
    Has anyone else run into an issue like this before? Were you able to resolve it?

    Hello FAHQALL,
    The resource below will provide some steps to try if your MacBook Pro won't turn on.  Resetting the SMC is one of them.  Troubleshooting the MagSafe adapter and installed RAM are also included.  There are links in the article for additional support if the computer needs to be physically inspected.
    If your Mac won't turn on - Apple Support
    I hope this information helps ....
    - Judy

  • MacBook Pro (June 2010) freezing with screen turned off (not sleep)

    This issue has happened to me two times now. I recently bought a Macbook Pro 13 inch and the problem has happened when I let the computer sitting there without moving anything with its lid opened, after like 20 minutes when i'm going to use it again it has the screen turned off, the fan on and the indicator light half way on constantly but anything would respond, to use it again I have to hold down the power botton until it turns off.
    It was not sleeping because I have the sleep timer set to never, what I do have on is the sleep display timer to 15 minutes.
    Any ideas?

    Please help!
    Now I got this then of turning it back again and a 3 min loading of the OS.
    What could it mean, I don't know how to read this please
    Interval Since Last Panic Report: 439785 sec
    Panics Since Last Report: 1
    Anonymous UUID: 99693572-2AB2-4994-91C1-BA78E287216A
    Sun Nov 28 08:09:45 2010
    panic(cpu 0 caller 0x2aab55): Kernel trap at 0x00333cc0, type 14=page fault, registers:
    CR0: 0x8001003b, CR2: 0x00000010, CR3: 0x0ec75000, CR4: 0x00000668
    EAX: 0x00000000, EBX: 0x169c152c, ECX: 0x711f0000, EDX: 0x084f0800
    CR2: 0x00000010, EBP: 0x75dc3d98, ESI: 0x169c1504, EDI: 0x00853800
    EFL: 0x00010246, EIP: 0x00333cc0, CS: 0x00000008, DS: 0x75dc0010
    Error code: 0x00000000
    Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
    0x75dc3ba8 : 0x21b50c (0x5d42fc 0x75dc3bdc 0x223974 0x0)
    0x75dc3bf8 : 0x2aab55 (0x59616c 0x333cc0 0xe 0x596336)
    0x75dc3cd8 : 0x2a09a8 (0x75dc3cf0 0x1 0x75dc3d98 0x333cc0)
    0x75dc3ce8 : 0x333cc0 (0xe 0x3700048 0x75dc0010 0x2a0010)
    0x75dc3d98 : 0x34bd51 (0x169c152c 0xc1d46f0 0x75dc3dc8 0xa284e9c)
    0x75dc3db8 : 0x383596 (0x169c1504 0xffff 0x1 0x33b12f)
    0x75dc3de8 : 0x392ce4 (0xa284e9c 0x246 0x75dc3e78 0x0)
    0x75dc3e08 : 0x4b0d1c (0xa2a6990 0x9 0x0 0x0)
    0x75dc3e68 : 0x4b0dc4 (0xa2a6990 0x1 0x75dc3eb8 0x47169e)
    0x75dc3e88 : 0x46ce50 (0xa2a6990 0x75dc3ed8 0x8707bc0 0x8a422a0)
    0x75dc3ef8 : 0x46ec01 (0x91548b0 0x9d34ee0 0x8a422a0 0x2329f0)
    0x75dc3f38 : 0x46ecd2 (0x0 0x46 0x75dc3f5c 0x1)
    0x75dc3f78 : 0x4f12e8 (0x8a422a0 0x8b11968 0x85d9ae4 0x54ba08)
    0x75dc3fc8 : 0x2a143d (0x8b11964 0x0 0x10 0x8b11964)
    BSD process name corresponding to current thread: mDNSResponder
    Mac OS version:
    Kernel version:
    Darwin Kernel Version 10.5.0: Fri Nov 5 23:20:39 PDT 2010; root:xnu-1504.9.17~1/RELEASE_I386
    System model name: MacBookPro7,1 (Mac-F222BEC8)
    System uptime in nanoseconds: 300147122741321
    unloaded kexts:
    com.speedbit.driver.vadriver 1.0.2 (addr 0x599fe000, size 0x20480) - last unloaded 127304656841847
    loaded kexts:
    com.speedbit.driver.vadriver 1.0.2 - last loaded 127304755007100
    com.vmware.kext.vmnet 3.0.0
    com.vmware.kext.vmioplug 3.0.0
    com.vmware.kext.vmci 3.0.0
    com.vmware.kext.vmx86 3.0.0
    com.parallels.kext.prl_vnic 5.0 9220.531002
    com.parallels.kext.prl_netbridge 5.0 9220.531002
    com.parallels.kext.prlusbconnect 5.0 9220.531002
    com.parallels.kext.prlhidhook 5.0 9220.531002
    com.parallels.kext.prl_hypervisor 5.0 9220.531002 2.0.2
    com.paragon-software.filesystems.ntfs 82
    com.vara.driver.VaraAudio 1.0.2
    com.Cycling74.driver.Soundflower 1.5.1
    com.iospirit.driver.rbiokithelper 1.8.0
    com.pctools.iantivirus.kfs 1.0.1
    com.AmbrosiaSW.AudioSupport 2.3.6 1.9.3d0 2.3.8f7 2.1.0 100.12.19 1.2.0 1.9.9f12 1.13 3.4.5 1.0.17 1.5.0d3 1.9.9f12 3.0.0d4 7.0.0 1.1.6 17 1.4.12 4.5.0d5 170.0.34 6.2.4 200.3.2 200.3.2 2.6.5 2.5.8 4.1.5 1.6.3 2.3.9b6 426.36.1 31 1.0.0d1 4.7.1 2.1.5 4.1.7 160.0.0 4.1.7 1.5 1.4.0 1.3.1 1.3.5 1.6 1.3.5 1.4 105.13.0 1 0 2.1.11 105.13.0 2.3.8f7 10.0.3 17 1.9.9f12 10 14 10 10 20 2.0.3 74.2 1.7.9fc4 1.3 1.9.9f12 1.9.9f12 1.0.8d0 41 3.1.0d3 4.5.0d5 1.0.8d0 6.2.4 6.2.4 2.2 2.2 2.3.8f7 2.3.8f7 2.3.8f7 206.6 4.1.5 2.6.5 1.6 1.6 1.6 2.6.5 2.6.5 4.1.5 3.9.0 1.2.5 2.6.5 402.1 312 1.9 4.2.6 2.0.4 4.1.5 4.1.7 2.2.7 1.4.0 1.6.5 1.1 1.0.0d1 6 289 1.6.2 1.3.5 2.6 1.3.0
    Model: MacBookPro7,1, BootROM MBP71.0039.B0B, 2 processors, Intel Core 2 Duo, 2.4 GHz, 4 GB, SMC 1.62f6
    Graphics: NVIDIA GeForce 320M, NVIDIA GeForce 320M, PCI, 256 MB
    Memory Module: global_name
    AirPort: spairportwireless_card_type_airportextreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 (
    Bluetooth: Version 2.3.8f7, 2 service, 19 devices, 1 incoming serial ports
    Network Service: AirPort, AirPort, en1
    Serial ATA Device: TOSHIBA MK2555GSXF, 232.89 GB
    Serial ATA Device: HL-DT-ST DVDRW GS23N
    USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8507, 0x24600000
    USB Device: Internal Memory Card Reader, 0x05ac (Apple Inc.), 0x8403, 0x26100000
    USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0x06500000
    USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x06600000
    USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8213, 0x06610000
    USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x0237, 0x06300000

  • Macbook Pro 10.6.8 will not turn off, restart, or even sleep after upgrading to OS X Mavericks

    It was working fine for the first 4 days until now, the computer won't turn off, won't restart, and won't sleep. When click on those button, the computer has no response. Also the iMessage App appears to not working as well. I tried forced turn off by holding the power button, but then it takes about 1 to turn back on. And now after it is on ago, it won't turn off again. And the Imssage is not working again. Other apps seems works just fine. Any suggestion?

    Hi, Kinshinhh. 
    Thank you for visiting Apple Support Communities.
    I would recommend processing an SMC reset on your MacBook Pro. 
    Intel-based Macs: Resetting the System Management Controller (SMC)
    If experiencing issues with messages, try the steps in the article below. 
    Connection Doctor
    In Messages, you can select Video > Connection Doctor to assist you with possible connection issues. Connection Doctor shows the following details:
    Statistics–With the following details
    Chat Duration–How long the chat has lasted.
    Frame rate–The number of frames per second (fps) that video plays.
    Bit rate–The average number of kilobits that one second of video data uses (kbits/s).
    Frame size–The resolution, in pixels, of the video. The mew pixels, the more detailed the image.
    Audio and video quality–100% means no loss of quality. Issues may occur if quality falls below 90%.
    Capabilities–A pane that shows you what capabilities you have based on your computers hardware and Internet connection.
    Network Statistics–Displays information about your bandwidth settings and network router type.
    Bandwidth limitation–Indicates whether the bandwidth has been limited to a particular speed in Messages.
    Tip: Click "Settings…" to open Messages preferences and adjust your "Bandwidth limit:" setting.
    Router type–Identifies the kind of network address translation (NAT) router your computer is using to communicate with other devices. Router type are:
    Tip: Consult with your network administrator, if you have a router type other than "Full Cone".
    Full Cone–Anyone on the Internet can send replies to the computer.
    Restricted–The router associates the translated address and port with a particular destination address. Replies from other addresses are filtered out.
    Port Restricted–The router associates the translated address and port with a particular destination address and port. Replies from other addresses and ports are filtered out.
    Symmetric–THe router associates the translated address and port with a particular destination address and port, but uses ad new translated port for each destination address and port.
    Unknown–The type of router could not be determined.
    Error Log–Inspect reported errors in the Messages error log. Note: This option is dimmed if there are no errors present.
    Mac Basics: Messages
    Jason H.

  • MacBook Pro 15" i7 the Display just turns off suddenly

    My MackBook Pro 15" i7  4GB RAM , 512 Video Memmory
      Some time  the Display just turns off suddenly....   and I cannot get it back on display again
       I have to restart to turn the screen back on .   After on  then popup error report msg
    this  is  Details........
    Interval Since Last Panic Report:  25906 sec
    Panics Since Last Report:          2
    Anonymous UUID:                    E1FB7524-2CEC-4A16-9524-CA53851EB8BC
    Sun Mar 31 00:28:21 2013
    panic(cpu 2 caller 0x9d4c9b): NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xc0000000 0x7f2cf000 0x0a5480a2, D0, P2/4
    Backtrace (CPU 2), Frame : Return Address (4 potential args on stack)
    0x5519a188 : 0x21b837 (0x5dd7fc 0x5519a1bc 0x223ce1 0x0)
    0x5519a1d8 : 0x9d4c9b (0xbea28c 0xc5a800 0xbf8e60 0x0)
    0x5519a278 : 0xaef608 (0x8db1c04 0x9382004 0x100 0xcb42b6)
    0x5519a2c8 : 0xae6601 (0x9382004 0x100 0x5519a2f8 0x9c4778)
    0x5519a2f8 : 0x16c89a6 (0x9382004 0x100 0x438004ee 0x5519a308)
    0x5519a438 : 0xb0e2b5 (0x9382004 0x9565004 0x0 0x0)
    0x5519a478 : 0x9dde7c (0x9382004 0x9565004 0x0 0x0)
    0x5519a518 : 0x9da55b (0x0 0x9 0x0 0x0)
    0x5519a6c8 : 0x9dc58f (0x0 0x600d600d 0x702b 0x5519a6f8)
    0x5519a798 : 0xc9feae (0xc1d00048 0xbfef0033 0xbfef0034 0x857c)
    0x5519a808 : 0xcaf734 (0x9c3a600 0x9d62580 0x8 0x3)
    0x5519a828 : 0xcd4322 (0x9d62580 0xb 0x5519a848 0x3648)
    0x5519a858 : 0xcd4b3d (0x9675000 0x0 0x5519a87c 0x0)
    0x5519a888 : 0xcb4d79 (0x9675000 0x7d297080 0x0 0x70)
    0x5519a8d8 : 0xc76d0c (0x4648d000 0x0 0x0 0x3)
    0x5519a948 : 0xc7640f (0x4648d000 0x0 0x2 0x3)
    0x5519a978 : 0xc6c05f (0x4648d000 0x0 0x2 0x4640c000)
    0x5519aab8 : 0xca55d8 (0x4640c000 0x1 0x5519abcc 0x5519abc8)
    0x5519ab68 : 0xc67fe1 (0x4640c000 0x1 0x5519abcc 0x5519abc8)
    0x5519abe8 : 0x56da06 (0x4640c000 0x0 0x5519ae3c 0x5519ac74)
    0x5519ac38 : 0x56e2a5 (0xcf6720 0x4640c000 0x9d27888 0x1)
    0x5519ac88 : 0x56eb59 (0x4640c000 0x10 0x5519acd0 0x0)
    0x5519ada8 : 0x286638 (0x4640c000 0x10 0x9d27888 0x1)
    0x5519be58 : 0x21dbe5 (0x9d27860 0xa55a5a0 0x1fd7e8 0x5d43)
    0x5519be98 : 0x210a86 (0x9d27800 0x0 0x9201b20 0x968d380)
    0x5519bef8 : 0x216f84 (0x9d27800 0x0 0x0 0x0)
    0x5519bf78 : 0x295c57 (0x900d7a8 0x0 0x0 0x0)
    0x5519bfc8 : 0x2a256d (0x900d7a4 0x7fff 0x10 0x900d7a4)
          Kernel Extensions in backtrace (with dependencies):
    BSD process name corresponding to current thread: WindowServer
    Mac OS version:
    Kernel version:
    Darwin Kernel Version 10.8.0: Tue Jun  7 16:33:36 PDT 2011; root:xnu-1504.15.3~1/RELEASE_I386
    System model name: MacBookPro6,2 (Mac-F22586C8)
    System uptime in nanoseconds: 1774311688225
    unloaded kexts:          4.2.0 (addr 0x142d000, size 0x65536) - last unloaded 124931706507
    loaded kexts:          1.9.3d0 - last loaded 23229544010          2.1.0          1.2.0          100.12.31          2.0.5f14          2.0.5f14          1.57          3.0.1d2          3.5.7          1.0.20          7.0.0          1.1.6          6.4.0          1.5.1          2.10.6          1.5.2d10          6.4.0          4.7.0a1          6.4.0          201.6          2.6.1          303.8          201.6          31.1          1.0.0d1          2.6.8          1.6.4          428.42.4          4.2.4          4.7.3          1.4.0          160.0.0          2.1.7          3.0.5b8          4.2.4          1.3.6          1.3.1          1.5          1.7          1.3.6          1.4          142.6.0          1          0          2.1.14          142.6.0          17          2.0.5f14          10          14          10          10          20          1.0.10d0          74.2          2.4.5f3          10.0.3          2.0.3          1.8.3fc2          1.3          2.0.5f14          2.0.5f14          41          1.0.10d0          1.0.1          6.4.0          6.4.0          3.1.0d5          4.7.0a1          2.2.1          2.2.1          2.4.5f3          2.4.5f3          2.4.5f3          2.6.8          2.6.7          207.7          4.2.0          4.2.4          3.9.0          2.6.8          1.6          1.6          1.6.1          402.1          1.2.6          2.6.8          320.1          4.2.4          4.2.6          2.0.6          1.10          4.2.4          1.4.0          1.6.6          1.1          1.0.0d1          6          289.1          1.6.3          1.3.6          2.6.5          1.3.0
    Model: MacBookPro6,2, BootROM MBP61.0057.B00, 2 processors, Intel Core i7, 2.66 GHz, 4 GB, SMC 1.58f15
    Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 512 MB
    Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
    Memory Module: global_name
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (
    Bluetooth: Version 2.4.5f3, 2 service, 19 devices, 1 incoming serial ports
    Network Service: AirPort, AirPort, en1
    Serial ATA Device: Hitachi HTS545050B9SA02, 465.76 GB
    Serial ATA Device: MATSHITADVD-R   UJ-898
    USB Device: Hub, 0x0424  (SMSC), 0x2514, 0xfa100000 / 2
    USB Device: Internal Memory Card Reader, 0x05ac  (Apple Inc.), 0x8403, 0xfa130000 / 5
    USB Device: Apple Internal Keyboard / Trackpad, 0x05ac  (Apple Inc.), 0x0236, 0xfa120000 / 4
    USB Device: BRCM2070 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0xfa110000 / 3
    USB Device: Bluetooth USB Host Controller, 0x05ac  (Apple Inc.), 0x8218, 0xfa113000 / 7
    USB Device: Hub, 0x0424  (SMSC), 0x2514, 0xfd100000 / 2
    USB Device: Built-in iSight, 0x05ac  (Apple Inc.), 0x8507, 0xfd110000 / 4
    USB Device: IR Receiver, 0x05ac  (Apple Inc.), 0x8242, 0xfd120000 / 3
    pls  help me............

    Welcome to the Apple Support Communities
    You have a Mid 2010 15-inch MacBook Pro, and your log is showing a NVIDIA graphic card problem.
    Apple has determined that these computers have got a defective NVIDIA graphic card, that may cause unexpected restarts, black screens, kernel panics... See >
    Fortunately, Apple is repairing all of these computers for free, so just make a backup of your data and take the MacBook Pro to an Apple Store or reseller to get your computer repaired. This repair may take some days depending on the place you take the MacBook Pro, because the whole logic board has to be replaced

Maybe you are looking for