Bluetooth n95 not working with headset

i have recently bought the motorola s9 bluetooth stereo headset. there are a couple of problems. it works fine to connect for the first time using the code on the phone. then if i turn the headset off and on it connects and immediatly disconnects. this is a problem but not a major one.
the biggest problem is the music cuts out all the time for a couple of seconds. i have tried placing the phone right next to the headset and it stil happens. i have read the other n95 forums and see this is very common with the new firmware (i had already installed new firmware so i dont know if this happened on the old firmware).
does anyone else have this problem with another headset or can anyone give me a solution. how often does firmware come out. and is it possible to delete the new firmware.

Same problem here, unfortunately - iPhone 3G & 3.0 do not work with both the SHB6100 and SHB7100 by Philips.
Philips SHB6100 + iPhone 3G 3.0: A2DP *does not work*
Philips SHB6100 + Nokia and SE phones: A2DP works
Philips SHB6100 + MacBook Leopard: A2DP works
Sony DR-BT30Q + iPhone 3G 3.0: A2DP works
Complaining here, however, is not really going to help as these are user to user forums and there is nothing users can do to fix this. Please report this issue at the Apple iPhone Feedback page @ http://www.apple.com/feedback/iphone.html

Similar Messages

Bluetooth is not working with Windows 8.1 on U410 touch

Hello,
I have a Lenovo U410 touch, and i just upgraded to windows 8.1 though the store.
And the bluetooth is not working at all, it says that the PC is searching for Bluetooth devices. While everything was working great before.
I have updated all the drivers from the Lenovo websites and still nothing is working
I went to device manager and checked under bluetooth: Intel (R) Centrino Wireless Bluettoth 4.0 + High Speed. Microsoft Bluettoth Enumator, Microsoft Bluetooth LE enumarator all 3 are up to date.
Then I went to network connections (from the start) and i have a red cross under Bluettoth network connection 2 and says not connected.
My windows is also up to date
I really think gooing back to Windows 8 since i cannot listen to my music on my beatbox and connect to my phone and tablet,
Thank you for your help

neokenchi wrote:
hi erabbath,
Welcome to the Forums.
If you have the Intel Centrino N2230 Wireless + Bluetooth adapter, can you try to:
1. Navigate to the Control Panel (large icon view) > Devices and Printers and try to pair a bluetooth device (i.e. Bluetooth Headset) and observe if it gets detected under the device list.
2. If the Bluetooth Headset is listed but it's not working try toright click on it > choose Properties. On the bluetooth properties Window, go to the Services Tab and check all the appropriate bluetooth services.
Sample picture
Let me know your findings.
Regards
Thank you very much for your answer,
I went to Control Panel > Devices and Printers and i tried to add a new device as the bluetooth doesn't appear this is what i got. By the way the bluetooth was on.
Link to picture
And this is what i have on the Bluettoth
And it search endlessly whereas before the upgrade it was working properly,
All the drivers are up to date as well as windows updates are all installed
Thanks in advance for your help
Regards
Moderator note; picture(s) totalling >50K converted to link(s) Forum Rules

Bluetooth No Longer Working With Headset

I have a Motorola bluetooth headset that I've used with my ibook before without a hitch, but when I screwed up OS X and reinstalled it (note: reinstalled the operating system, but didn't format) it no longer works with the headset. I can connect to it just fine, but if I try to use it for anything such as switch my audio output to the headset, the program will freeze - same applies to using the headset for input. The headset isn't broken as it works fine with my phone, but my ibook won't cooperate and they are paired correctly. Is their someway to reinstall the bluetooth drivers or something to that extent? Thanks

jrnet154 wrote:
Hi - I'm a student with disabilities and rely heavily on accessibility features that make my life easier. For example, I use a Bluetooth headset to trying answer phone calls and use Siri… I especially use the "Raise to speak" option for accessing Siri
If you have a headset, why use Raise to speak? Kinda defeats the purpose of the headset.
Press and hold the button on your headest to call up Siri.

IPhone 5 Bluetooth Audio not working with stock Toyota radio

I have a 2010 Toyota 4Runner Limited which has the premimum JBL radio in it. Up until recently, I have had an iPhone 4 which worked well with both hands free phone features, along with Bluetooth Audio so I can stream my music from iTunes or Amazon Cloud Players. I dont use the feature all the time, so I am not sure when it stopped working (after upgrading to IOS6 or upgrading to an iPhone 5) but bluetooth audio no longer works. I can still use the bluetooth phone features, but if I go to the bluetooth music tab on my stereo, it states that the portable player is not connected. Siri also works fine through bluetooth, as it it can read my text messages, ask and answer questions through the car stereo, though I cannot make an outgoing call with Siri because after it shuts off siri and starts to dial, my stereo disconnects.
I know Apple updated the bluetooth, but you would think the new version would be backwards compatible, right? Is there a plan from Apple to fix this, because I am sure Toyota isnt going to update the firmware on their stereos just to fix an issue with one phone...

Actually, as an update, mine is now working (the BlueTooth Audio part, Siri still cannot place calls).
I have done this on my first (now smashed) iPhone 5 and my new iPhone 5. It takes a lot of trial and error, but you can get it to work.
First thing is with the iPhone 4, all I had to do was connect the phone in the phone connect screen and it just worked for both. Not so with the 5. With the 5, I have to register it both in the Audo Settings> Bluetooth Audio Settings menus as well as the phone settings on the radio. I didnt know there were two different connections with two different pins. (0000 and 1212). I forget which one you have to connect first, but again, I tried it so many times both installs and it eventually worked. It may be easier to change the name of either the Phone or Bluetooh Audio name from Car Multimedia, so the iPhone can easily connect to one or the other, but I left them both with the same name. I can now play music, and when the phone rings, automatically swaps over to that one.
Play with it and you will get it to work. If I have time, i will remove it and do it again and write down the steps.

Iphone 5 bluetooth is not working with my macbook

can somebody help me? my iphone 5 is not working when i try to use it with my mackbook.

What are you trying to do? The only thing you can pair your bluetooth for is to tether from your phone to your macbook. You cannot do anything else with bluetooth.

Bluetooth Suddenly Not Working With My Huawei Phone

I have a 13 inch Macbook Pro (the latest one). I also have a Huawei y300 phone. The two used to work together fine. I could send photos back and forth using bluetooth with no problems. But now I can't send anything. I can pair my phone with my MacBook but when I go to send a file, I get a "cancelled by user" message on my phone. Nothing will connect to Bluetooth on my Macbook. I think it's the Yosemite update. That's when the bluetooth seemed to have stopped working. Has anyone had this issue? is there any fix?

First check and see if Wacom has a driver update.
If their most recent driver does not solve the problem, then you need to call Wacom and work with them to see why the driver is not working on your system.

Apple Bluetooth Keyboard not working with Macbook??

I copied this from a post on a reply earlier, but thought I'd start a new post and hope that someone has had a similar problem.
I have the new Apple wireless keyboard that doesn't work on my Macbook. Ironically, the only keys that do work are the top row. Screen brighten or dim, Dashboard, speaker volume control etc...
I've connected it and paired it successfully, but the keys just don't seem to work. (delete and arrow keys also work) After a while, my mighty mouse (wireless) start acting funny, or the track pad button on the laptop itself stops working. Shutting of the keyboard at this point doesn't help and I need to reboot the computer.
I've taken it to Fortune Tower in Bangkok where they have a apple support center and he couldn't get it to work on his 17" mac book pro either. He wanted me to leave it, but I took it back to the international departure terminal of the Bangkok international airport, (had to wait for another flight to China to do this) and returned it to the store where I bought it. But they wanted to see the problem and I showed them that it didn't work. Convinced, then then brought out a new one and I wanted to verify that IT worked but same exact problems.
I suggested that they connect it to another computer? Which they did, an Imac and it worked fine. Then they connected it to a Mac Book Pro, (15 inch) and it worked fine there as well.
Could this be a firmware update issue?
Anyone else having problems like this?
I just hope that this isn't a simple setting somewhere that I've overlooked... but I'll try anything at this point.
thanks,

I have exactly the same problem! Macbook Pro 2GHz (so not a very recent one...), OS, firmware, etc updated to the latest. My Mac dealer proposed to do a clean installation of 10.5.2 - did not help. Apple Support told me to uninstall the keyboard and install it again (for more help they want money...) I did - same problem. Only function keys and cursor keys work. Funny thing - during pairing the code can be entered and recognized, but later no character cames through.
The keyboard is perfectly OK, since it works with my MacPro without any problems.
The mouse, on other hand, works nicely so far.
Maybe now will someone give us a wise advice?

New Bluetooth Keyboard Not Working with iMac 2005

I just purchased a refurbished 2009 wireless Mac keyboard for my computer at work to replace the old outdated one. However, when I try getting it to connect I encounter a problem. While its being picked up by the bluetooth just fine, it tells me that it is unable to actually connect. It tells me the keyboard itself does not have the 'services' required to connect to the computer. I'm not sure what this means? This is not an issue I have ever encountered before. If anyone can assist me with this issue I would greatly appreciate it.

HI Michelle
i have the same problem Also using an iMac21 inch late 2012. Has been working perfectly until 10.10.3. Now when the iMac wakes from sleep neither the mouse or keyboard are connected. The only recourse is to force a hard restart with the power button.
i have tried all your above items and also to no avail. I have set sleep to wait indefinitely & that has resolved my issue. Albeit with an increase in energy use.
I Would be grateful if anybody had some tips on how to resolve this situation.
thanks
paul

Ipad bluetooth keyboard not working with remote desktop

My clients ipad bluetooth keyboard works any other time, just not when connected to his servers via the remote desktop. PC Windows 7 Servers.
I'm trying to get the keyboard information, but any ideas?

Are you using an app like LogMeIn Ignition to access your servers? I believe that LogMeIn Ignition requires you to tap a little keyboard button near the bottom of the screen to activate use of the keyboard (that's how it works in Splashtop Remote, can't be much different in LogMeIn Ignition.)
Are you sure the app you have supports blue tooth keyboard support with remote desktop? (not sure if they have to, I just recall seeing this in Splashtop patch notes awhile ago.)
HuskieN.

Bluetooth Headphones not working with the Nano 6th Gen

I was wondering if anyone else out there has issues with using bluetooth headphone with the new nano. I have a pair of Motorola Motoroka S9 headphones and have to use the D650 Adapter with it and when I plug into the bottom of the iPod I get "Unsupported" Accessory is not supported. As I know Apple hates to put bluetooth in anything other then iPod Touch & iPhones. What's up with that?? All my other nanos 2nd & 3rd Gens work fine with the adapter......but my current and newest one doesn't. Anyone else having that issue?

SchuFlee wrote:
How did you reboot the ipod nano 6th gen?
Two things this thing needs.
1. Digital / regular watch face combo.
2. capable bluetooth headphones. Either a plug in add-on to either headphone or multi-pin port. Also a speaker of some sort to tell that an alarm is going off.
I use alarms on my watch.
more watch face designs(digital and analogue) would be awesome.

Logitech cordless bluetooth headphones not working with zen to

Anyone else have problems with these only coming through one speaker. Or if there was something I needed to do to fix this.

I don't have any other bluetooth devices. I wish I did that would solve the mystery on if it's the headphones. Update I just messed with the headphone adapter and I hear it in one ear then the other ear only when it's securly in there. If I have it out a little in the middle it catches both speakers sometimes. You think that is the headphones that are defecti've or my second plug in the touch. The reoson I say the second plugin spot is that it works great with simple headphone plugged in.

Nokia Bluetooth does not work with Parrot carkit o...

I cannot call with my Nokia E90 via my build-in Renault Carminat Bluetooth carkit, nor with my Parrot CK3100, unless I put on or off (!) the external SIM-mode in the Nokia, after connection is established with the carkit. The next time I enter the car, calling is not possible, unless I again put on or off the external SIM-mode. Anybody knows what to do?

Hi there,
please give some more details. What do you want to connect? A mobile phone or whatever? Did you installed the latest drivers/bluetooth stack from the toshiba website?
If not already did, check this link an download the stack for your machine:
http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp
And I would appreciate a more detailed description of your problem.
Thx

Bluetooth will not work with car stereo after IOS6

I upgraded to ios6 and lost a number of Bluetooth functions with Alpine car stereo 1. Can no longer control playback from head unit. 2. Track info no longer displayed on head unit. 3. When head unit finds iPhone it no longer begins to play automatically.

If this is an after market car radio, you can go to the manufacures website, and they should have an update available for your head unit. Some manufactures dont have it available and you may need to replace and update your head unit. If this is factory installed, go to your local dealership, and they can do the update for you.

Smart Talk not working with Bluetooth since update

I have been using Smart Talk for many months now on my iPhone. I have a bluetooth headset which I generally use.
This has worked fine (with the exception that when I get an incomming call it disconnects the bluetooth from the Smart Talk call).
But now, since installing version 1.28.0, Smart Talk is not working with my bluetooth headset at all. When I first make a call the headset is connected - I hear ringback tone. But as soon as the call is answered, the headset disconnects and the call is transferred to the iPhone itself. And the Smart Talk app does not give me any options to select the "audio source" (as it does if I make an ordinary mobile call).
As I almost exclusively use the headset, this latest update has made Smart Talk unusable for me.
Is there anyway I can get back to the previous version?

I worked out the problem... I'm using iPhone 4S iOS7
- Start BT Smart Talk from in car
- call someone, connects to bluetooth
- call someone else, connects to bluetooth
- call someone else, no bluetooth connection
- kill and restart BT Smart talk
- call someone, connects to bluetooth
- call someone else, connects to bluetooth
- call someone else, no bluetooth connection
3rd call, always no bluetooth.
It seems there is no way to select the output like with all other bluetooth devices too

Bluetooth does not work correctly with Siemens Tek Connect headphone device

I hopefully tried the new bluetooth support in OS 3.0, but it does not work with my Siemens Tek Connect headphone device. It syncs as expected, but no sound is heard. I can choose the Tek Connect in the music app and other programs, my headphone (actually my two hearing aids, which are connected wireless with ear to ear communications (e2e) via the Tek Connect necklace device) signals the connection to me (a beep), but nothing is heard. Codec problem?
Andreas

I own Phonak hearing aids with their Bluetooth-capable iCom device which allows my aids to be used as a phone headset and also supports the A2DP stereo bluetooth profile. My iPod Touch 2Gen 32GB is able to play to my hearing aids properly.
One thing I noticed is that the iPod does not allow you to control the volume when using Bluetooth. It expects the headphones to be able to control the volume. Have you used your hearing aids as Bluetooth headphones on any other device? Maybe the device isn't programmed properly to set the volume while in headphones mode. I know my audiologist had to program the volume on each mode separately on my device.
My MacBook Pro is able to play music over Bluetooth to my hearing aids fine. But I have never gotten Windows to work properly sending audio to my hearing aids. Do you have a Mac with Bluetooth? Try to get that working to see if it's your hearing aid device that's causing the trouble or not.

Bluetooth n95 not working with headset

Similar Messages

Maybe you are looking for