Bluetooth no longer works with iOS 7

Hi everyone, my Bluetooth simply will not work on my iPhone 4 of my iPad 2. It turns on and searches however they don't even discover each other. I have tried to pair it with my car which it des see however I keep getting an error when I try to pair them. I don't even get to the password stage. Any one know a fix for this? Thanks

There are some other discussions on loss of lock screen and control center music controls.
https://discussions.apple.com/message/23063432#23063432
https://discussions.apple.com/message/23042786#23042786
https://discussions.apple.com/message/23071045#23071045
I believe it is the same issue, which would indicate that it is an issue with the phone, nothing to do with the car/stereo/speakers/etc.
When I lose Bluetooth control I also lose lock screen (and control center) controls.  Other controls work, but no play, pause, skip forward/back, and of course no song resume on reconnection.  A hard phone reset or power cycle fixes it every time, I never have to mess with the car.  However, the issue re-occurs about every 2-4 days and I have to reset the phone again to get control back.  Does everyone else lose lock screen control at the same time as BT?
It may be a hardware issue.  I have a 4S.  What phone models are exibiting the BT issue?

Similar Messages

  • TS2755 Messages no longer works with iOS 6.

    Messages no longer works with iOS 6. Done all the checks, everything that's recommended. Zilch

    Had the same problem after updating to ios 6 could not send-recieve text messages at all. Did a restore on  iphone same problem, changed setting same problem. called at&t they said they is a problem the ios 6 that changes setting at att  take techline 15 minutes and imessage and text messages working ok

  • Active Sync certificates no longer work with iOs 4.3

    Existing Active Sync certificates no longer work with iOs 4.3. Can I fix this?

    My results differ from yours.
    With iOS 4.0x, 4.1 and 4.2x my smart playlists with live updating were broken. It would start with track 1 of 5, then 2 of 4, then 3 of 3, 4 of 2, then would generally crash the iPod app. If I left the playlist and re-entered it would have removed the entries already played, but I would find that some of the entries that should have played had actually been skipped in m playlist.
    With iOS 4.3, my playlists are properly working for me again. Now they play 1 of 5, 2 of 5, 3 of 5, ... If I return to the playlist while it is playing, I see that the entries that have already played are removed, and if I leave the playlist to return later, it starts over a 1 of 2, 2 of 2...
    I have posted another thread of how I have my playlists defined, so perhaps that would help you. I do recall that there were some conditions that used to cause problems if used in a smart playlist.

  • Bluetooth No Longer Working With Headset

    I have a Motorola bluetooth headset that I've used with my ibook before without a hitch, but when I screwed up OS X and reinstalled it (note: reinstalled the operating system, but didn't format) it no longer works with the headset. I can connect to it just fine, but if I try to use it for anything such as switch my audio output to the headset, the program will freeze - same applies to using the headset for input. The headset isn't broken as it works fine with my phone, but my ibook won't cooperate and they are paired correctly. Is their someway to reinstall the bluetooth drivers or something to that extent? Thanks

    jrnet154 wrote:
    Hi - I'm a student with disabilities and rely heavily on accessibility features that make my life easier. For example, I use a Bluetooth headset to trying answer phone calls and use Siri… I especially use the "Raise to speak" option for accessing Siri
    If you have a headset, why use Raise to speak? Kinda defeats the purpose of the headset.
    Press and hold the button on your headest to call up Siri.

  • Ipod out no longer works with iOS 6.1

    As the title suggests, after updating my iPhone 5 to iOS 6.1 the iPod out function no longer works with connected devices. With the previous version, I could hook up my Kenwood car stereo using the lightning to 30 pin adapter and the stereo would "Read" my iPhone and begin playing the first track of my music collection. I also had song, artist and playlist search support.
    Now, all I get is a constant "Reading" indicator and can't get past this point.
    Is anyone else having any experiences similar to this and does anyone have any suggestions to fix it?
    Thanks

    Try this.
    Go to Settings>General>Date and Time>Set Automatically>Off.
    Set the date one year ahead. Try to get email.
    If you get an error message, go back to the settings. Correct the date and time (set automatically) then go back and try to get email again.

  • AirPrint no longer works with ios 5?

    I can no longer print from my print app print n share. I used this app to
    Print my "drivers log book" app. Tech support from print n share said
    Apple took away the feature to print through all print apps that send wifi
    Straight to the printer. Why would apple do this?

    It's possible to use free software (Virtualbox and Ubuntu) to fix the broken iOS 5 Airprint printing with non supported printers.  Here's a fix that works on my imac, but should also work on even a windows pc.
    My setup is a lion imac with 2 non-airprint supported usb printers attached, a belkin wifi router that provides network connectivity for my imac, ipad, and iphone.
    Install ubuntu 11.10 in a virtualbox vm.  Specify to use the "Bridged Adapter" with "en1: WiFi (AirPort)" for the network hardware.  Make sure the imac's usb printers are setup with sharing.  On ubuntu, select System Settings > Printers and add your imac's shared printers to the list.  Then start ubuntu's firefox and set "localhost:631" in the address. On the administration tab, under the Server section, check "Share printers connected to this system" and hit Change Settings button to activate it.  Go back to ubuntu's printer setup, and right click on each printer and check that the properties Policies tab does not have any messages about it being unshared. If so, then go back to firefox and make sure the Server sharing checkbox is enabled. It may help to reboot.
    Fire up virtualbox to be able to use AirPort printing to your imac's usb printers, when you want to print from the iphone or ipad. This also works on iOS 5.
    Only problem is error message from iphone to check the printer for errors, even though it actually prints ok.
    references: 
    http://askubuntu.com/questions/26130/how-can-share-my-printer-so-that-i-can-use- it-with-airprint
    https://lists.ubuntu.com/archives/ubuntu-devel/2011-June/033611.html

  • Bluetooth no longer works with Toyota

    After the 2.01 upgrade, the bluetooth connection with my Toyota Sequoia no longer works. It will pair but will not be recognized.

    Actually, I'll bet you can get it to link-up, but indeed, since V 2.0.1 mine doesn't automatically link anymore, the key word being "automatically". I discovered that you can manually force it to be recognized in my 2007 Toyota Prius, but you have to re-enter the 4-digit pass code every time you start the engine. Try this: On your iPhone, go to Settings/General/Bluetooth, and un-pair your Toyota device (which the default is "Hands Free". Then, from the Toyota's main phone screen: Settings/Bluetooth/Register. Finally, enter the 4 digit code shown, into the iPhone, which by now should be looking for that code.
    Again, this is just a one-time work-around, which unfortunately must be repeated every time, until someone figures out how to restore the automatic linking.

  • IPad 2 hdmi connector no longer works with iOS 7.3

    Hi any one else had this issue? I have always connected my iPad 2 to my tv via a apple made hdmi connector, used mainly for fils on netflix eat. Since firmware updated to 7.3 this no longer works. Is this anther apple issue? My wife has an iPad 3, pre lightening and the "official" adapter has never works just get a message that states the attached accessory is not supported.... Any ideas anyone???

    I have an ipad 2 running ios 6.0.1 and an older Dell TV (1080i) and have always been able to mirror.  Running ios 5 the mirroring worked perfectly for sound and video.  Don't remember if I tried while running 5.1.  Now that I have 6.0.1, I can still mirror, but the whole screen is pink on this Dell TV.  When I make the connection from ipad to the tv, mirroring starts immediately and the notification bar on the ipad home screen pulsates from blue to black and the cable is detected.  I have sound and video working fine except for the colors.  The ipad detects the AV Composite cable under settings>about but there is no TV out setting under General Settings where I'm supposed to see TV OUT listed under iTunes Wi-Fi sync.  I have changed the hdmi to a new one, but it didn't help.  I also have a new Panasonic Viera tv and everything (with the same cables) works perfectly on that TV.  Leads me to believe it's an issue with the TV OUT function of the ipad.  I don't know if any of this is helfpul information, but I thought it might help you narrow down what is going on with your setup.

  • Answering calls from car no longer works with iOS 8 update

    After updating the firmware to iOS8 my iPhone no longer answers calls from my car bluetooth audio. I get the call alert but the car answer button is disabled.. I am using standard bluetooth communication and not the A2DP technology.
    Is anyone facing a similar issue?
    I am using iPhone 5s

    I know that I had to delete the entry in the car's Bluetooth setup (for Steve's iPhone - replaced and iPhone 5 with 6) and then go through the setup again to get it to work. Perhaps that would solve your issue?

  • Airplay no longer works with IOS 7.0.3?

    I have uploaded IOS 7.0.3 to my I-Pad but now Music does not offer Airplay through my Airport Express and music system as it used to - is there any fix?  Airport Utility shows a good connection and Airplay is enabled.  The system works OK with my MacBook Pro

    If you don't see the AirPlay icon in the Control Center:
    1. Turn off router, Apple TV and iPad
    2. Turn on router and then wait 30 seconds for it to complete start-up process
    3. Turn on Apple TV and then wait 30 seconds for it to complete start-up process
    4. Turn on iPad (wait 30 seconds) and test AirPlay

  • Apple Lightning to SD Card Reader no longer working with iOS 8.0.2

    I just tried to copy photos from my wedding to my iPhone 5 and iPad Mini w/Retina(both with iOS8.0.2), and I get the message "This device is not supported". I find this odd, as it is the official Apple branded SD card reader.
    Does anyone have any ideas as to why this would all of a sudden not be working? I had no issues prior to updating to 8.0.2.
    If it is just this version of iOS, I do hope that it is fixed in 8.1.

    The lightning to SD card reader has NEVER been supported on the iPhone only on iPads
    Compatibility
    Questions about compatibility?
    Call
    0800 048 0408 or Chat now 
    iPad models
    iPad with Retina displayiPad miniiPad mini with Retina displayiPad Air
    To sort the iPad suggest you restore the device  especially if you did the update ovrer the air

  • Gmail push no longer working with iOS 6?

    I am not sure if this is an iPhone 5 issue or an iOS 6 issue but since getting my iPhone 5, GMail is not getting pushed to my device, mail only arrives when I open the Mail app. All of my settings are correct, the account is set up as an Exchange account and the same settings work fine on my iPad 2. I have deleted and re-added the account, removed all mail accounts and added them back one by one, and now done a restore. Still exactly the same problem.
    Only option I can see is to set up as a new phone but that's going to be painful, anyone else having the same problem?
    Thanks
    Chris

    Guys, I've just tried this and it worked for me. I'll post an update if it stops working, but it appears having 2-step authorisation is mandatory on iOS 6
    http://www.youtube.com/watch?v=mP0UaTMxGCY&hd=1

  • EMAIL NO LONGER WORKS WITH IOS 6

    After I downloaded IOS 6 my email stopped working. I checked all my settings and nothing changed. Is this a known bug or something else? Any solutions?

    Try this.
    Go to Settings>General>Date and Time>Set Automatically>Off.
    Set the date one year ahead. Try to get email.
    If you get an error message, go back to the settings. Correct the date and time (set automatically) then go back and try to get email again.

  • Autofill for email no longer works with ios 6

    iphone 4s does not autofill email addresses after iphone ios 6 update

    Try this.
    Go to Settings>General>Date and Time>Set Automatically>Off.
    Set the date one year ahead. Try to get email.
    If you get an error message, go back to the settings. Correct the date and time (set automatically) then go back and try to get email again.

  • S11 flex Bluetooth doesn't work with IOS 7

    Unit connects but sound plays through iPhone or iPad. S11 is not available (even though connected) in Airplay Listing. If I hold down  mute button SIRI come on through head set. If I tell SIRI to play play list the playlist plays but music still plays through speakers on iPhone

    I reset my Motorola S11 Flex to factory settings and it works just fine now. To do that, make sure the head phones are off. Press the power button and multi-function button and the lady in the head phones will talk to you..the first option is to reset to factory settings. Do this and it will work. Hoped this helped

Maybe you are looking for

  • HT202879 I have latest version of Numbers (3.1) but when I try to open a Numbers sp. sheet it says I need a newer version.

    Numbers sp sheet is shared. Both user systems on same rev of Numbers. I have latest version of Numbers (3.1) but when I try to open a Numbers sp. sheet it says I need a newer version. There is no newer version available. The files get info box says t

  • Problem in SOAP Client Handler configuration

    Hi all, I am working on a webservice project where i have to send SOAP headers in the SOPA Request from Client and retrive the same at webservice end. I have configured server Handler in webservices.xml of the Webservice and it is working fine. (It i

  • Sub contracting scenarios

    Hi gurus, I have a question on Sub contracting. My present scenario is--- -I have CD which have some content in that.when I go for printing of that content,I will give that CD to the vendor and i will ask him to print 100 books.In this case the CD ha

  • Abap keyword documentation for ERP 2005

    Hi, I am currently working on a R/3 upgrade project and I am looking for changes on the programming language ABAP. The problem is, those changes are documented in the ABAP key documentation. But since, we have not yet the new version, I have no acces

  • Redirecting a domain URL to a file

    Is there any SAF directive (e.g NameTrans) to redirect a domain URL (e.g http://www.xyz.com/rob.txt) to a file rob.txt sitting at location /x/y/rob.txt (other than root directory rob.txt). Bascially I want to achieve any request coming to http://www.