Bluetooth not being detected on Windows XP SP2 (3000 N200)

Hi,
I removed windows vista that came preinstalled and installed a windows xp sp2. I downloaded the bluetooth drivers for my version ie. 3000 N200 0769 BBG. But the bluetooth is not being detected. The bluetooth LED is always off (Only the WLAN LED is green). I tried to install drivers from broadcom site also. But, installation is not proceeding as it cannot detect any hardware. Bluetooth was working properly on windows vista. So i dont think it is any harware issue.
Any idea what could be the problem? Please help me out with this ...
Thanks & Regards
Ashok

Bluetooth is working 100% perfectly with Win Xp. I think you guys are not installed proper driver, i think this link will help you out..
http://www-307.ibm.com/pc/support/site.wss/TVSU-UPDATE.html#DLP
Best option is better to download System Update 3.14 (16MB) tool in the avobe link and you will get all the proper drivers for your lap. Till now you uanble to slove your problem I will upload the Blooth tooth driver for you. Let me know Waiting for your reply.
Thank you
_Kid_

Similar Messages

Iphone 4s not being detected by windows 8 laptop and itunes

Hey all,
My iphone 4s is stuck in recovery mode and my laptop is not detecting the iphone when i plug it in. I plug in my other iphone and ipods fine but this iphone 4s is not being detected so i know it is not the cables. I have uninstalled all of the apple apps and drivers from my computer including itunes and re-installed them again and still nothing. When i turn on the iphone it shows a blue itunes logo with a cable indicating for me to connect it to my laptop, but it turns off after 30 seconds which doesn't allow it to restore thus a notification shows up on itunes saying that the iphone could not be found.
I downloaded the latest version of ios, but could not install it since the iphone is not responding. so right now it is basically a paper weight.
Is there anything i can do?
thanks all....

Hello Bethany2
Try creating a different user for your computer and open iTunes to see if shows up in that newly created user. The article below will home a few more troubleshooting steps, some of which you have already tried.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
Regards,
-Norm G.

Ipod not being detected by Windows

Hey! I've asked this question before, but no one has given me anything yet. Not being selfish or anything. But when I put in my ipod my computer tells me:
One of the USB devices attached to this computer has malfunctioned, and Windows does not recognize it.
For that, Itunes doesn't detect it either. Can't put songs on when that happens and it leads to an very distressed kid. Can someone help me and others who have this problem?

but then I'll have to get all the song from CD's again.
If they are all in your iTunes library and you sync your iPod, when you get a new iPod, you just need to sync it to the library. If you've been manually managing your iPod's content, and the songs are not stored on your computer, well, you were taking a chance that the iPod would break or get lost.

New Zen Touch not being detected by Windows

I just bought a 20 gig Zen Touch off ebay, and tried to get it to run.
The firmware on the Zen tells me it's version 2..0, which is the PlaysForSure version. So, I downloaded the driver specific to PlaysForSure, and tried to run it. It looked like it installed just fine, but when I plug in the player, it just recognizes it (at the start) as Creative Zen Touch, and opens up the Found New Hardware wizard. So, I don't think it recognizes my Zen.
This, of course, leads to all the programs not being able to recognize my Zen, either, and to me not being able to reload the firmware (just in case), or anything of the sort. Not really sure how to proceed, and I've been scanning the help files, which have been no help. The knowledge database seems to suggest that Windows XP will just load the proper drivers, which, of course, it doesn't.
How do I proceed? I thought this would be the answer, but it presumes that Windows will detect the device as an MTP, and somehow just find the right driver, which it doesn't.
I'm at a bit of a loss as to where I go from here. The drivers aren't installing, and the closest I can get is my Device Manager showing the Creative Zen with a big yellow question mark next to it, because the drivers aren't installed properly.
Help?

Try downloading and installing the latest drivers, Creative Zen and Jukebox Driver Upgrade version .30.03.
Also try running a disk cleanup from rescue mode.

360 wireless received not being detected by Windows 7 64bit

Greetings, I bought this controller a couple of years ago and it's worked fine with Win7 until now. Now the receiver isn't being detected by 2 different computers. This makes it sound like the receiver has failed, but because it's not really and active
device how often do they really fail? There doesn't appear to be anyway to force Windows to detect something, the "find new device" wizard never finds it's and never even returns from looking. Any advice is appreciated.

Windows 7 is an Operating System. It is not a diagnostic tool and it has no capability to compensate for defective hardware!
You need to contact your service provider or the manufacturer for diagnostic assistance with your defective hardware. All hardware fails at some point. Some may be fully functional for years while others will fail within a very short period time.
The is now way to forecast when a piece of hardware will fail.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

IPod Not Being detected by windows.. pls hepl!!!!!!!!!!!

i have a 5.5 gen ipod 30 gig video.
whenever i connect it to my computer, it says 'the usb device attached to the computer has malfunctioned and windows does not recognise it' is there something wrong with my ipod motherboard?? in the meantime it plays music n charges normally with an adapter.
im in a fix
i cant update my ipod or sync anything
can anyone please help me out

I have the same problem wiht my 5g 60GB unit, the USB driver reinstall method from the iPod support page does not work, I tried most solutions you find online, 5R's, restarting the PC, cheching the drivers, etc. the last 2 solution I'll try before getting a new mainboard (just to save all the Backup data I have on its disk) to see if it works are:
1.- Connecting it to a Mac, to let it mount, disconnect it safely and test again in a PC. (It worked before with several USB memory drives that weren't recognized after being unplugged from a PC without the proper procedure)
2.- Try with a FireWire cable.
I've been struggling with this for about 2 weeks and those are the only two choices left, during the week I'll check with a friend's Mac (how I miss Mine!) and will keep you posted.
See ya

Ipod not being detected by windows. please help!!!

I have an iPod 30 gb. Serial No- 8L647801V9K
Its about two years old.
All of a sudden one fine day, it stopped showing up on my the computer. Neither does itunes detect it nor does internet explorer. A bubble shows up saying the usb device attached has malfunctioned. It doesnt even charge.
I tried resetting it(centre + Menu)
then i thought my usb cable was bad.
i bought another one and the same problem continues.
i even tried the diagnostic option in itunes to detect ipod.
the ipods completely dysfunctional when connected via either of my two cables.
the 'do not disconnect sign' doesnt come and neither does the battery charging one.
there's nothing wrong with my computer or my usb because i tried my ipod with two other computers as well.
But funny enough, the ipod charges with the adaptor.
im totally stumped
i hope i manage to get this issue sorted out.
i feel lost without being able to update my ipod or sync my playlists.
please help me
thanks

Promi wrote:
I have an iPod 30 gb.
Its about two years old.
So then it is a Classic model and not a 5th generation model?
Promi wrote:
there's nothing wrong with my computer or my usb because i tried my ipod with two other computers as well.
AND??? The iPod did or did not work with the other two computers?
Patrick

HFS+ partitions not being detected on Windows 7

Hello Apple Discussions community,
I recently bought a Mid 2014 Retina Macbook Pro, and installed Windows 7 on it using Bootcamp, I installed the appropriate Bootcamp drivers including the one responsible for HFS+ support (verified that they were installed correctly by looking at the /Windows/System32/drivers directory), and all updates available for Windows, but the Mac OS X HFS+ partition doesn't show up in Windows Explorer as it would on my older MacBook Pro late 2011, is there anything I may have missed to get HFS+ partitions to show up?
Any help would be very much appreciated.
Thank you in advance.

Bluetooth is working 100% perfectly with Win Xp. I think you guys are not installed proper driver, i think this link will help you out..
http://www-307.ibm.com/pc/support/site.wss/TVSU-UPDATE.html#DLP
Best option is better to download System Update 3.14 (16MB) tool in the avobe link and you will get all the proper drivers for your lap. Till now you uanble to slove your problem I will upload the Blooth tooth driver for you. Let me know Waiting for your reply.
Thank you
_Kid_

Ipod 4g 32G not turning on, not charging (on multiple cords, both comp and wall, 4 20min), not being detected by Itunes or Windows 7 64bit OS, will not reset, tried taking it out of "DFU", NO DMG, Itunes up2date, All I'm getting is a blank black scrn

Ipod Touch 4th generation 32G not turning on, not charging.
I have used multiple cords on both computer USB and wall USB converters. I let it sit there for over 20 min with each attempt.
It is not being detected by Itunes or my Windows 7 64bit OS. I have tried all 4 of my USB ports (both USB 2.0 and 3.0), with 3 different chargers.
Holding home and power button will not reset.
Tried taking it out of "DFU" mode but Itunes won't detect it, I didn't think that would work anyway.
NO DAMAGE, I have been very careful with it, aside from a few minor scratches. (that you can't even see unless the light reflects them)
My Itunes is up to date, as is my OS.
All I'm getting is a blank black screen. It has been working fine on this computer before. I have no idea what could have happened. I'm at my wits end here.

See if you missed anything here:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

My iphone is not being detected by the itunes on my laptop with windows 8

the iphone is not being detected by the itunes on my laptop with windows 8
someone please help

iPhone, iPad, or iPod touch not appearing in iTunes

My Ipod Nano 5th generation is not being detected by Widows and Itunes. I have tried everything based on the trouble shooting tips outlined. Has anyone had this situation before? How was it resolved. My Ipod is just out of warrenty

Have done all trouble shooting tech a through Apples and still have not resolved issues on Windows and itunes not detecting my Ipod nano 5th generation device. Tried restoring the device manually using disk mode and still not being detected by the computer. Device is our of warenty as when service repair charges are $125.00 dolars more than I paid for this device. There must be some way to restore the entire device to factor settings without having to be connected to itunes and Windows. I wish I could connect but again device is not being read. I have another Ipod that is 8GB instaed of 16GB and it works fine. The sad thing about this situation is that my 9year old daughter worked hard doing delivering fliers for a long time to save her money to buy this 16 GB 5th generation Nano. Otherwise the Ipod works well but will not syncronize songs as it is not being detected. Maybe this is a result of corrupt files that got onto my daughters Ipod somehow and thus causing it not the be detwected through the USB connection thus as a result not be understoud as a working device through Windows and itunes. If anyone can help me out there including itune techs that would be well appreciated, but for now my daughter is not able to add new or delete any songs on her ipod as well pictures, and everything. Thanks

Try changing the cord. I could NOT get my computer to recognize my iPod 5th Gen until I read somewhere that different apple devices use different cords. I was inadvertently using my iPad cord and that caused my computer to not recognize my ipod.

My iphone 4 is not being detected by any of my computers and not charging when connected to any computer. It will, however, charge to the car or wall. The only change that I can think of is that I downloaded a podcast from itunes directly from my phone.

My iphone 4 is not being detected by any of my computers and not charging when connected to any computer. It will, however, charge to the car or wall. The only change that I can think of is that I downloaded a podcast from itunes directly from my phone. I've since deleted this podcast with no luck. I've restarted both the phone and the computer, still no luck. One computer is running Vista and the other Windows 7, both have the latest Itunes Update. Anyone have a fix for this?

You clearly did not notice that you have joined a USER TO USER COMMUNITY FORUM
This is NOT Apple ,Apple do not read nor do they therefore respond
So if you would like to wind your neck in ........................
try a reset of iPhone and then a restore,best, as new and if it then functions correctly try restoring with your backup

Hp v235r flash drive not being detected on my computer

Hi,
I am using hp v235r flash drive for more than 5 years. It's not being detected on my computer since two days. Can any one solve my problem, as there is lot of important data stored in it and hasn't been backed up recently.

Hello budda48,
Its possible the driver for the pen drive is corrupted in your computer, or the drive has met its end of life.
First, confirm that the Pen Drive is seen by other computers. Plug it in to another computer that you havent tried yet.
If it is not working on other computers, then the usb drive is corrupted and there wont be anything else we can do.
If it is working in other computers, then try these steps to troubleshoot the Pen Drive.
Confirm that the port on the computer is not bad. Choose a different port to insert the drive. Next…
Part 1: Make sure that the drive has a drive letter assigned in Disk Management.
Open Computer Management by right clicking on Computer and clicking Manage.
Click on Disk Management. Give it a moment to open the view of the drives installed.
Look for a drive that does not have an assigned drive letter and is not labeled as System Reserved.
Note: System reserved drives are reserved by Windows and will not allow you to assign a letter.
Right-click the unlabeled drive and click Change drive letter and paths…
Click Add and then click OK to select the first available drive letter.
If the Change drive letter and paths… option is not available, make sure that the drive is Online.
If the drive is Offline, right-click the disk number and click Online.
Part 2: If the drive does have a letter assigned and it still does not work, uninstall the driver.
You can safely remove any usb drivers that are not in use (hidden drivers). Devices that get plugged in later will simply reinstall its needed driver again.
Remove the pen drive from the computer if it’s attached.
Right click Computer and click on Properties. In the System window on the left side, click on Advanced System Properties.
Choose the Advanced tab and click on Environment Variables… button at the bottom.
Under System Variables, click on the New… button
Type this in the box that pops up. Variable Name: devmgr_show_nonpresent_devices and also give the Variable Value: 1
Click OK on all the open windows to close them out.
Go to Computer Management again and click on Device Manager. Go to View at the top of the window and click on Show Hidden Devices.
Click on the drop down arrow for Universal Serial Bus Controllers to open the list. Look for any USB Mass Storage Device that is hidden (greyed out) and delete it. There may be several and it’s ok to delete all those hidden USB Mass Storage Devices.
When you connect the pen drive to the computer again, give it a minute to reinstall the driver.

IPhone 6 and iPod Touch 5 not being detected by iTunes 12

iPod 5 and iPhone 6 is not being detected after I downloaded iTunes 12.1.2
Tried changing the lightning conductor, that didn't help either.
Re-installed iTunes but it was of no use. :/

See iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2

Phone not being detected on laptop

hi , well my phone is not being detected, i made assure that the usb cable is alright, usb port is not 3.0 and is fine good and is among working ports, after trying so much i changed pc , cable but the phone still remains same undetected, wherein if i restart my phone it shows installing mtp drivers and shows symbol to have patience post which it shows error,it is behaving this way only after the update to kitkat i guess, because before that it was alright.suggestions appreciated and thanks in advance
Solved!
Go to Solution.

To solve the issue, open Device Manager on your computer to reinstall the driver for your device while your device is connected with your PC via a USB cable.
Microsoft Windows Vista and 7 users
To open Device manager on your computer
Click on the Start button.
In the Search box, type device manager, and then press enter.
To reinstall the drivers for your device
Scroll down to the Universal Serial Bus controllers (USB section) of the Device Manager window.
Look for an MTP Device: Media Device, Unknown Device or any other reference to your phone. Click on this entry and choose "Uninstall" whilst leaving the device connected.
Wait a few minutes, and the computer will reinstall the drivers for the device.
Now, the phone is accessible via Computer/My Computer on your computer.
What are your thoughts about this forum? Let us know by doing this short survey.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Bluetooth not being detected on Windows XP SP2 (3000 N200)

Similar Messages

Maybe you are looking for