BO XI 3.1 SP3 Install issue on Windows Server 2008 R2 64-bit
We are trying to install the lastest Build of Business Objects XI 3.1 SP3 on a new server with Windows Server 2008 R2 64-bit OS (51038908_part1.exe,51038908_part2.rar, 51038908_part3.rar).
The setup never finish! It seems that the setup can't validate the CMS installation and is trying again and again.
In the "Enterprise XI 3.1 SP3 - Windows - Supported Platforms" document, the Windows Server 2008 R2 Entreprise 64-bit Edition is supported.
The antivirus is desactivated and the setup.exe file was launched in the administrator mode.
Any ideas?
Edited by: Frederic Wojnarowski on Nov 22, 2010 5:45 PM
We have run into similar issues with that same package (51038908_part1.exe) which is a complete install of "BOE-3.1 package with SP3" for Windows 2008 Server that only installs in the 64-bit mode.
We had a 32-bit Oracle 10g client installed, that BOE did not recognize for the CMS - so the install was hanging at the CMS config...(no clear errors / no simple way to roll-back the failed install).
We only discovered the underlying Oracle issue when we deployed just the CMS with a local MySQL database - and then tried to point the CMS at the Oracle DB instead. It gave us TNS errors even though we could hit the same TNS without issue using SQL-PLUS on the same machine.
This lead us to assume that the 64-bit BOE couldn't connect via the 32-bit Oracle 10g drivers.
We have had trouble installing the 64-bit Oracle 10g client that we downloaded - so are now looking for some advice.
Anyone know which specific 64-bit Oracle 10g client should be used with the cumulative "BOE-3.1 package with SP3" 64-bit package (51038908_part1.exe)...?
I assume that this Oracle client will be used for any connection to the CMS / AUDIT Oracle databases - and any RPT content running on the CR-JobServers that is using an Oracle Native connection...?
Thanks in advance for the advice.
Similar Messages
-
Installing CF9 on Windows Server 2008 Standard 64-bit
Hi-
I'm attempting to install a new ColdFusion configuration with a host who is useless regarding the support that they offer (for now, they shall remain nameless).
It's a Windows Server 2008 Standard 64 bit VPS configuration. MySQL is already installed so I'm on the hook to configure ColdFusion 9 with IIS (7.5, I believe). There are numerous settings which the installer does not seem to address so I've had to address several Module Mappings which failed during the install....
Can anyone point me to an installation doc for the above configuration? Will the CF installer eventually handle these issues or are we on our own to support this?
Thanks in advance,
RichMy advice is to get out now and go to a site like hosting.com that has a solid track record hosting CF. There are several others to choose from. If they are starting this rough you will have constant problems.
-
Issue Installing SP2 for Windows Server 2008 SP1
Hello, I have a very annoying issue, and I hope someone can help a bro out.
Server: Windows Server 2008 SP1 64-bit
Issue: SP2 wont install on Windows Server 2008 SP1
This is what I am seeing when I check the event viewer:
1. (Information) Windows Servicing is setting package KB948465(Service Pack) state to Staging(Staging)
2. (Error) Windows Servicing failed to complete the process of changing update 948465-382_neutral_GDR from package KB948465(Service Pack) into Staging(Staging) state
I have no idea why this is coming up, nor why the server cant fix the issue, but now I am forced to deal with it. So if anyone has any helpful tips it would be greatly appreciated.
What I have done so far:
I have downloaded the standalone SP2 file from microsoft, and tried to install, still failed. Just sent me to the prereq page, which is pretty useless considering the fact I already have SP1 installed, and nothing new has changed physically or digitally
in the system.
Also, although not a huge issue, I also have a security update that is failing, basically with the same issue as the SP. Below is its Error event log.
(Error) Windows Servicing failed to complete the process of changing update 974318-11_neutral_LDR from package KB974318(Security Update) into Staging(Staging) state
Im hoping that upon discovering the SP issue, I can resolve the security update issue, as the errors have the same issue(failed to complete staging state).Thank you for your time.
~I will provide any further info if needed.Thank you for pointing me in the right direction Milos. Yes I ALWAYS google my issues before going on forums for help. And to no avail. However, below is the relevant info(sorry I did not post this the first time;first time dealing with an issue like this,
so I wasnt for shore what relevant data pertained to this issue):
I also did not copy and paste the entire log in here(obviously) because its huge, however I will post link to full file if requested/needed, but hopefully I grabbed the entire log for my SP2 update failure issue. All I can grab from this log is that the
CBS failed. However, I have no clue where to go after that..
WindowsUpdate.log:
2015-02-22 19:24:15:093
940 d10
AU AU initiated download, updateId = {D0ABB478-FFD1-448A-9058-939C0B427AD4}.107, callId = {2AFDE80E-EFBF-40A6-861B-32400AC5493B}
2015-02-22 19:24:15:093
940 d10
AU Setting AU scheduled install time to 2015-02-23 08:00:00
2015-02-22 19:24:15:106
940 1538
DnldMgr *************
2015-02-22 19:24:15:107
940 1538
DnldMgr ** START ** DnldMgr: Downloading updates [CallerId = AutomaticUpdates]
2015-02-22 19:24:15:107
940 1538
DnldMgr *********
2015-02-22 19:24:15:107
940 1538
DnldMgr * Call ID = {2AFDE80E-EFBF-40A6-861B-32400AC5493B}
2015-02-22 19:24:15:107
940 1538
DnldMgr * Priority = 1, Interactive = 0, Owner is system = 1, Explicit proxy = 0, Proxy session id = -1, ServiceId = {9482F4B4-E343-43B6-B170-9A65BC822C77}
2015-02-22 19:24:15:107
940 1538
DnldMgr * Updates to download = 1
2015-02-22 19:24:15:107
940 1538
Agent * Title = Windows Server 2008 Service Pack 2 for x64-based Systems (KB948465)
2015-02-22 19:24:15:108
940 1538
Agent * UpdateId = {D0ABB478-FFD1-448A-9058-939C0B427AD4}.107
2015-02-22 19:24:15:108
940 1538
Agent * Bundles 2 updates:
2015-02-22 19:24:15:108
940 1538
Agent * {A34F6A47-5AB9-44CB-AB3F-9FC64F7B903C}.107
2015-02-22 19:24:15:108
940 1538
Agent * {77DBCA97-29DC-42BA-9DB2-03C7B4D262D4}.107
2015-02-22 19:24:15:108
940 1538
DnldMgr *********** DnldMgr: Regulation Refresh [Svc: {9482F4B4-E343-43B6-B170-9A65BC822C77}] ***********
2015-02-22 19:24:15:108
940 1538
DnldMgr Contacting regulation server for 2 updates.
2015-02-22 19:24:15:109
940 1538
Misc Validating signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\wuredir.cab:
2015-02-22 19:24:15:119
940 1538
Misc Microsoft signed: Yes
2015-02-22 19:24:15:123
940 1538
Misc Validating signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\wuredir.cab:
2015-02-22 19:24:15:131
940 1538
Misc Microsoft signed: Yes
2015-02-22 19:24:15:134
940 1538
DnldMgr Regulation server path: https://www.update.microsoft.com/v6/UpdateRegulationService/UpdateRegulation.asmx.
2015-02-22 19:24:15:135
940 d10
AU # Pending download calls = 1
2015-02-22 19:24:15:135
940 d10
AU <<## SUBMITTED ## AU: Download updates
2015-02-22 19:24:15:644
940 1538
DnldMgr * Regulation call complete. 0x00000000
2015-02-22 19:24:15:661
940 1538
DnldMgr *********** DnldMgr: New download job [UpdateId = {A34F6A47-5AB9-44CB-AB3F-9FC64F7B903C}.107] ***********
2015-02-22 19:24:15:732
940 1538
DnldMgr * All files for update were already downloaded and are valid.
2015-02-22 19:24:15:732
940 1538
DnldMgr *********** DnldMgr: New download job [UpdateId = {77DBCA97-29DC-42BA-9DB2-03C7B4D262D4}.107] ***********
2015-02-22 19:24:15:733
940 1538
DnldMgr * Queueing update for download handler request generation.
2015-02-22 19:24:15:733
940 1538
DnldMgr Generating download request for update {77DBCA97-29DC-42BA-9DB2-03C7B4D262D4}.107
2015-02-22 19:24:16:095
940 1538
Handler Generating request for CBS update 77DBCA97-29DC-42BA-9DB2-03C7B4D262D4 in sandbox C:\Windows\SoftwareDistribution\Download\2c728f96f2387c9d64aed5c97088b631
2015-02-22 19:24:16:095
940 1538
Handler Selected payload type is ptExpress
2015-02-22 19:24:16:124
940 1538
Handler UH: DpxRestoreJob returned 0x80070002
2015-02-22 19:24:16:124
940 1538
Handler Detected download state is dsHavePackage
2015-02-22 19:25:32:077
940 dcc
AU AU received policy change subscription event
2015-02-22 19:26:21:898
940 d40
Handler FATAL: CBS called Error with 0x80070002,
2015-02-22 19:26:21:899
940 1538
Handler FATAL: UH: 0x80070002: Async stage operation failed in CUHCbsHandler::StageCbsPackage
2015-02-22 19:26:21:909
940 1538
Handler FATAL: Request generation for CBS update complete with hr=0x80070002 and pfResetSandbox=0
2015-02-22 19:26:21:909
940 1538
Handler FATAL: Error source is 106.
2015-02-22 19:26:21:909
940 1538
DnldMgr FATAL: DM:CAgentDownloadManager::GenerateAllDownloadRequests: GenerateDownloadRequest failed with 0x80070002.
2015-02-22 19:26:21:909
940 1538
DnldMgr Error 0x80070002 occurred while downloading update; notifying dependent calls.
2015-02-22 19:26:35:006
940 1538
Agent *********
2015-02-22 19:26:35:006
940 d10
AU >>## RESUMED ## AU: Download update [UpdateId = {D0ABB478-FFD1-448A-9058-939C0B427AD4}]
2015-02-22 19:26:35:007
940 1538
Agent ** END ** Agent: Downloading updates [CallerId = AutomaticUpdates]
2015-02-22 19:26:35:007
940 d10
AU # WARNING: Download failed, error = 0x80070002
2015-02-22 19:26:35:007
940 1538
Agent *************
2015-02-22 19:26:35:007
940 d10
AU #########
2015-02-22 19:26:35:007
940 1538
Report REPORT EVENT: {3C6B2054-CE6F-4A29-9E94-D44AB5C4963F}
2015-02-22 19:24:15:004-0500 1
147 101
{00000000-0000-0000-0000-000000000000}
0 0 AutomaticUpdates
Success Software Synchronization
Windows Update Client successfully detected 2 updates.
2015-02-22 19:26:35:008
940 d10
AU ## END ## AU: Download updates
2015-02-22 19:26:35:008
940 d10
AU #############
2015-02-22 19:26:35:008
940 d10
AU Setting AU scheduled install time to 2015-02-23 08:00:00
2015-02-22 19:26:35:008
940 1538
Report CWERReporter finishing event handling. (00000000)
2015-02-22 19:26:35:009
940 1538
Report REPORT EVENT: {85DD7E1D-0632-44FF-81F3-34E75B954869}
2015-02-22 19:26:22:129-0500 1
161 106
{D0ABB478-FFD1-448A-9058-939C0B427AD4}
107 80070002
AutomaticUpdates Failure
Content Download Error: Download failed.
2015-02-22 19:26:35:181
940 1538
Report CWERReporter::HandleEvents - WER report upload completed with status 0x8
2015-02-22 19:26:35:181
940 1538
Report WER Report sent: 7.4.7600.226 0x80070002 D0ABB478-FFD1-448A-9058-939C0B427AD4 Download 106 Unmanaged
2015-02-22 19:26:35:182
940 1538
Report CWERReporter finishing event handling. (00000000)
2015-02-22 19:26:40:009
940 1538
Report REPORT EVENT: {E88B7854-8974-46BE-B243-143ED103C6FF}
2015-02-22 19:26:35:009-0500 1
188 102
{00000000-0000-0000-0000-000000000000}
0 0 AutomaticUpdates
Success Content Install
Installation Ready: The following updates are downloaded and ready for installation. This computer is currently scheduled to install these updates on Monday, February 23, 2015 at 3:00 AM: - Security Update for Windows Server 2008 x64 Edition
(KB2507618)
2015-02-22 19:26:40:009
940 1538
Report CWERReporter finishing event handling. (00000000) -
Hp laserjet pro mfp m126nw printing issues in windows server 2008 r2 standard
hp laserjet pro mfp m126nw printing issues in windows server 2008 r2 standard
printer installed but print not coming ...
please give me solutions of this problemgo to http://www.hp.com/go/tools may help resolve the issue.
Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
Click "Accept as Solution" if it solved your problem, so others can find it.
I work on behalf of HP. -
Is it possible to install Firefox on Windows Server 2008?
I try to install Firefox 3.6 on Windows server 2008 but it says that the file is corrupted.
Is it possible to install Firefox on Windows Server 2008?From the Parallels website:
32-bit Operating Systems
Windows 8 with: Windows 8, 8.1 (when available)
Windows 7 SP1
Windows Vista SP0, SP1, SP2
Windows Server 2008 R2, SP2, SP1, SP0
64-bit Operating Systems
Windows 8
Windows 7 SP1
Windows Vista SP0, SP1, SP2
Windows Server 2012
Windows Server 2008 R2, SP2, SP1, SP0
I do suggest that you upgrade RAM to at least 8gig
if you haven't already.
FWIW, I currently use Win8/64 bit with Parallels on a 2011 Mini Server
using the windows environment for engineering applications and have
had no issues. I am running Mountain Lion but do not have the
Server app installed. -
I am wondering if it is possible to install and run Windows Server 2008 on a Mac Mini Server as a VM as my main application uses Windows VisualBasic and Fox Pro and requires a Static IP to connect to it, My other offices connects to Windows Server via RDP.
Basically I am researching a Server for the same purpose and since Mac Mini and OsX both are robust in nature it can fit the bill if every thing work fine.
ThanksFrom the Parallels website:
32-bit Operating Systems
Windows 8 with: Windows 8, 8.1 (when available)
Windows 7 SP1
Windows Vista SP0, SP1, SP2
Windows Server 2008 R2, SP2, SP1, SP0
64-bit Operating Systems
Windows 8
Windows 7 SP1
Windows Vista SP0, SP1, SP2
Windows Server 2012
Windows Server 2008 R2, SP2, SP1, SP0
I do suggest that you upgrade RAM to at least 8gig
if you haven't already.
FWIW, I currently use Win8/64 bit with Parallels on a 2011 Mini Server
using the windows environment for engineering applications and have
had no issues. I am running Mountain Lion but do not have the
Server app installed. -
Installing Application Server 10g (10.1.3) on Windows Server 2008 R2 64 bit
installing Application Server 10g (10.1.3) on Windows Server 2008 R2 64 bit
i have installed this but restarting of server making problem
i m not able to start opmn.ctl
what should i do is there any other version to be downloaded
I did.
1. i installed X 86 software as 64 bits is available for itanium only
2. it installed successfully after changing value in orapram.ini
now after reboot of server my opmnctl doesnt come up
what can be the issue?hi,
1st..check whether all the services of oracle are started in services.msc(if possible pls specify what all services of oracle can you see in services.msc)
2nd..when you use the command opmnctl startall..what errors do you get..
3rd..can you specify the opmn.logs and ons logs
Regards
Fabian -
Installing a New Windows Server 2008 R2 Child Domain by Using the Command Line
Installing a New Windows Server 2008 R2 Child Domain by Using the Command Line:
http://technet.microsoft.com/en-us/library/cc731873%28v=ws.10%29.aspx
dcpromo /unattend /InstallDns:yes /ParentDomainDNSName:mysite.com /replicaOrNewDomain:domain /newDomain:child /newDomainDnsName:gridview.mysite.com /childName:gridview /DomainNetbiosName:gridview
/databasePath:"c:\Windows\ntds" /logPath:"c:\Windows\ntds" /sysvolpath:"c:\Windows\SYSVOL" /safeModeAdminPassword:pass1 /forestLevel:4 /domainLevel:4 /rebootOnCompletion:yes
Error Code:
The specific argument 'childName' is not recognized.
I am trying to insert gridview as a childname.Hi,
Before going further, can we try another domain name to see what will happen?
Besides, if the issue persists, we can try installing a new child domain by using the GUI.
Installing a New Child Domain by Using the Graphical User Interface (GUI)
http://technet.microsoft.com/en-us/library/cc771856(v=ws.10).aspx
Best regards,
Frank Shen -
Cannot install WSUS in Windows Server 2008
Hi.
I want to install WSUS in Windows Server 2008 R2 Enterprise, but when it try I have a prompt to upgrade Web Services (IIS), then I have a Fail message.
Here is the HTML File log:
<Informational>: This server might need to be restarted after the installation completes.
Web Server (IIS)
<Informational>: Find out more about Windows System Resource Manager (WSRM) and how it can help optimize CPU usage
Web Server
Application Development
ASP.NET
.NET Extensibility
ISAPI Extensions
ISAPI Filters
Security
Windows Authentication
Performance
Dynamic Content Compression
Management Tools
IIS 6 Management Compatibility
IIS 6 Metabase Compatibility
Windows Server Update Services
Web Server (IIS): Installation failed
The following role services were not installed:
Web Server
Application Development
ASP.NET
.NET Extensibility
ISAPI Extensions
ISAPI Filters
Security
Windows Authentication
Performance
Dynamic Content Compression
Management Tools
IIS 6 Management Compatibility
IIS 6 Metabase Compatibility
Windows Server Update Services: Installation failed
<Error>: The update could not be found. There may be a network connection issue. Click here for more information.
Please refer to the full log at: 'C:\Windows\logs\ServerManager.log'
And the .log file log is here:
2988: 2009-07-14 09:19:42.125 [InstallationProgressPage] Loading progress page...
2988: 2009-07-14 09:19:42.156 [InstallationProgressPage] Creating WindowsUpdateDownloader.
2988: 2009-07-14 09:19:42.156 [InstallationProgressPage] Searching for Updates...
2988: 2009-07-14 09:19:42.156 [InstallationProgressPage] Starting asynchronous download.
2988: 2009-07-14 09:19:42.171 [WindowsUpdateDownloader] Creating session.
2988: 2009-07-14 09:19:42.171 [WindowsUpdateDownloader] Search query: 'CategoryIDs contains '4e487029-f550-4c22-8b31-9173f3f95786''
2988: 2009-07-14 09:19:42.171 [WindowsUpdateDownloader] Searching....
2988: 2009-07-14 09:19:51.328 [WindowsUpdateDownloader] Initial search failed, try again on WU server.
2988: 2009-07-14 09:19:52.843 [WindowsUpdateDownloader] Search returned: Succeeded, found 0 updates.
2988: 2009-07-14 09:19:52.843 [InstallationProgressPage] Search completed, result: Succeeded.
2988: 2009-07-14 09:19:52.843 [InstallationProgressPage] Downloading...
2988: 2009-07-14 09:19:52.843 [WindowsUpdateDownloader] Sending failure DownloadComplete event.
2988: 2009-07-14 09:19:52.843 [InstallationProgressPage] Download completed, result: NotStarted.
2988: 2009-07-14 09:19:52.843 [InstallationProgressPage] Error (Id=0) Failure message: 'The update could not be found. There may be a network connection issue. <a href="WSUS.chm::/html/54a9eb1f-5dd1-42d8-ad00-dae55d7b9463.htm">Click here for more information.</a>'
2988: 2009-07-14 09:19:52.843 [InstallationProgressPage] Invoking LoadFinishPage.
2988: 2009-07-14 09:19:52.859 [InstallationProgressPage] About to load finish page...
2988: 2009-07-14 09:19:52.859 [InstallationFinishPage] Loading finish page
2988: 2009-07-14 09:19:52.875 [InstallationFinishPage] Finish page loaded
I checked my Internet Connection, and no problems with that, Wndows update works fine.
RegardsThe reason these solutions all work is because previously these machines were WSUS CLIENTS, and thus looking to the (sometimes no longer present) WSUS SERVER to find the WSUS Dynamic Installer update.
By unlinking the GPO or moving the server to the Computer Container (not OU, btw), you effectively revert that machine to being an Automatic Updates client, and it can then obtain the WSUS Dynamic Installer update from Automatic
Updates.
You can also achieve this objective by:
1. Run gpupdate /force (to reset the 90 minute GPRefresh timer).
2. Edit the registry and set the HKLM\Software\Policies\Microsoft\Windows\WindowsUpdate\AU "UseWUServer" value to ZERO, which also disables the machine as a WSUS Client.
From there you'll have at least sixty minutes (minimum GPrefresh interval) to install the WSUS Role, after which the machine will automatically revert back to the previous "WSUS Client" status -- which, presumably, is to be a client of itself.
Lawrence Garvin, M.S., MCITP:EA, MCDBA, MCSA
Principal/CTO, Onsite Technology Solutions, Houston, Texas
Microsoft MVP - Software Distribution (2005-2011)
My MVP Profile: http://mvp.support.microsoft.com/profile/Lawrence.Garvin
My Blog: http://onsitechsolutions.spaces.live.com -
Installing forms 11gr2 services on windows server 2008 r2 64 bit
hello,
I successfully installed on windows 7 64 bit my developer forms & reports 11gR2 with weblogic 10.3.5 , jdk 1.6.0_+.
Now i want to install in it in windows server 2008 R2 64bit, to deploy the application i created as a test.
Question.
1. Can I used the same installation set up , step, procedure as the development mode by only changing the installation mode to production mode in windows 2008R2?
1.1 Do I need to create domain first after install the weblogic or it is like the development mode that the FRM_installation will create its classic domain?
2. Can I used it without the fusion middleware?
3. It is compatible version for forms 11gr2 for Oracle Fusion Middleware 11g Release 1 (11.1.1.6.0) ? << doubted not compatible.
4. It is valid if i only install weblogic server 10.3.5 without the fusion middleware? Am I or other clients can able to access it?
5. It is will be a AS server even if without the repository creation?
Note : i only need the forms&report server services to run our application on windows server 2008 R2 64 bit and compile respectedly.
I ve done it with OAS 10g before but different procedures now since forms 11gr2 is using now weblogic server.
Thank you very much.... i want to install in it ... , to deploy the application i created as a test If you chose the "Development" install option during the installation of 11.1.2 you would have everything you needed to run your form. The only significant difference between the Dev and Deploy installation is the that in the Dev install type the Forms and Reports Servlets are deployed into the Admin server Managed server rather than creating a unique one for each. For local testing purposes, this should be sufficient for most cases. If on the other hand you need a full installation (Deployment), I would recommend that you choose this option, but be sure to also include the Builders. The Builders are available for both install types. I would not recommend attempting to have both install types installed together although it likely can be done. Having both installed would likely create confusion and difficulty during troubleshooting.
Important point. If you choose the Deployment option and include the Builders during that installation, you do not need to start everything in order to run a form. All that is needed is WLS_FORMS. All other processes can be stopped if system resources is a concern. For an actual production deployment, it is recommended that you route end-user requests through HTTP Server, but this is not required unless you plan to use SSO or other feature that is managed through HTTP Server. -
Install ASM On Windows server 2008
Hi all Nice Evening, i want to know how to install asm on windows server 2008 step by step guide.
Hi,
http://download.oracle.com/docs/cd/B19306_01/server.102/b14231/storeman.htm#sthref1648
Please use the above link to check the step by step configuration
Regards,
Taj -
Issues on Installing Oracle on Windows Server 2008 Guested on VMware Workstation 10
I am trying to install Oracle 11g R2 on Windows Server 2008 Guested on VMware Workstation 10 but I am getting this Warning on Enterprise Manager Configuration at the end of installation.
Besides, when I tried to connect to hr database through Oracle SQL Developer I am getting following error:
Can you please let me know what I have done wrong? and how can I fix This? ThanksFarzanx1 wrote:
I need to install and configure Active Directory and DNS service on a
remote Windows Server 2008 R2 which has a public facing IP, gateway
and DNS. I don't really understand such network structure:
IP Address: xx.xx.93.158
Subnet Mask: 255.255.255.252
Default Gateway: xx.xx.93.157
DNS: xx.xx.64.10
I have experience on installing AD and DC, DNS services on local
servers (which then the server becomes the DC for the local network)
but I hesitate to do this on a publicly facing production server.
Unfortunately I wasn't able to find a proper guide for my case.
Would appreciate if someone could guide me on the steps I need to
take so that I will not disturb the current network settings. (A
little down time for installing the services and features is ok as
long as I don't lose connectivity)
Thanks
You want to install AD on an Internet Server?
According to your description your server has one public IP-address and
no internal IP-address and you want to install AD on this Internet
server?? Is that correct??
Can you tell us the intended use of this server. Do you want to host
services on this server, which need AD authentication?
If you have a second NIC and your DC is on another local machine I
would not expose your local AD on an public accessible server. If this
server shall become a DC it should not have more than one IP-address.
If you want to access data on this server via Internet securely I would
recommend a VPN solution - preferably not running on the server itself
but on a separate firewall between the server and the internet. In this
case I would have no see a big security problem running AD on this
server.
Wolfgang -
Issues installing 10g2 on windows server 2008 R2 x64
I'm trying to install 10g2 on a windows sever 2008 box.
Oracle Version: Oracle 10g2 (10204_vista_w2k8_x64_production_db) - found on the page that claims to support server 2008 x64.
Windows Version: Windows Server 2008 R2 Standard (6.1).
After extracting the installer that was supposed to work on server 2008, I get this:
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be 5.0, 5.1, 5.2 or 6.0 . Actual 6.1 Failed <<<<
Exiting Oracle Universal Installer, log for this session can be found at C:\Program Files (x86)\Oracle\Inventory\logs\installActions2009-12-23_12-34-55PM.log
Please press Enter to exit...
Am I missing something here? From the oracle download page (http://www.oracle.com/technology/software/products/database/oracle10g/htdocs/10204_winx64_vista_win2k8.html), it claims this is a supported OS (also included in the title!).Hi;
It seems, Windows 2008 R2 is not certified yet
Please check below and see its helpful for you
Oracle 10g Installation on Windows Server 2008 RC2
windows server 2008 Oracle 10G 64 bit
Regard
Helios -
Deployment issue on windows server 2008(64 bit)
Hi all,
I am using crystal reports 2008 trial version for my web application. Its working fine in development environment but when I deploy application in windows server 2008 64 bit edition it shows following error:"An error has occurred while attempting to load the Crystal Reports runtime. Either the Crystal Reports registry key permissions are insufficient, or the Crystal Reports runtime is not installed correctly. Please install the appropriate Crystal Reports redistributable (CRRedist*.msi) containing the correct version of the Crystal Reports runtime (x86, x64, or Itanium) required."
Is there any resolution available for this problem except for changing the IIS settings for 32 bit applications?
RgdsRead the following [article|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/10d5fa88-2013-2c10-c9a5-f11963607d4e;jsessionid=(J2EE3417600)ID0244107750DB11172929121510648759End] as it goes over your issue.
Essentially you will have to set IIS to 32 bit at the least.
Jason -
Windows 8.1 RDP Issues with Windows Server 2008 Standard.
I have an issue maintaining an RDP connection from 64-bit windows 8.1 (standard and pro) to 32-bit Windows Server 2008 Standard. Initial connection is normal, and as long as I am constantly typing on the link, for the most part it stays up. However
if I do not keep typing, or go to another desktop program for a few minutes, and then go back, the following happens:
If I am typing into notepad (or some screen that does not require windows to be refreshed) I can continue to do so, so the connection has not been lost, however if I try to do something that requires more extensive exchange of information (like file
- open, or even trying to pull up the start menu), the connection pauses with about half the screen refreshed, sometimes after about 30 seconds a bit more of the screen fills out, but otherwise the connection is not responsive. Then after about 2 minutes,
RDP reconnects, at which point I am back to "normal". I have conducted some tests and made inquiries of others attempting to connect to the server.
1) I can connect to other Windows (servers 2008 R2 and 2012) with no connection issues from this PC
2) I can connect to the 32-bit server with no issues using Windows Vista Ultimate and Windows 7 from the same location as the WIndows 8.1 PC
3) When I do a network speed test while having these issues I see full download and upload speeds, so I am not experiencing intermittent internet issues.
4) No-one else from other locations (not of course using Windows 8.1) has any issues using RDP to the 32-bit Windows Server Standard.
These various tests seem to eliminate my network connection, and other operating systems, from the equation, and point to RDP issues on windows 8.1 connecting to the older OS. I noticed in the September updates, a case 2989039 which seemed to point
to similar issues when using UDP through Remote Desktop Gateway. That update is on my machine, and my connection has the setting Automatically detect RD Access Gateway server settings.
Any thoughts anyone?Hi RonaldRenaud,
If my understanding is right, this RDP issue only occur in the connection between Windows 8.1 and Server 2008.
Please check if you have installed the update kb2984006.
To resolve this issue caused by update 2989039, install update rollup 2984006. For more information, please refer to the following KB.
http://support2.microsoft.com/kb/2989039/en-us
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support
Maybe you are looking for
-
Report generation only one time successfull
Hi @all, we are facing the problem that the report generation process is only working one time successfully, the next time it ends with error. After restarting the service on the WWI server the next generation is successfull, but the second one will
-
Is it possible to set up multiple iTunes accounts on a single computer?
is it possible to set up multiple iTunes accounts on a single computer?
-
TS1424 Ok simple but can not find were in this sight to ask this so here it goes
I have been charged twice for the same thing please refund one of the following ASAP to account on file thanks you Marcia Aulebach Sent from iPad On Sep 7, 2012, at 3:00 AM, iTunes Store <[email protected]> wrote: refund please Billed To: Marcia A. R
-
Upgrading solaris 10 from solaris 8
Hi Experts, Looking for your advices/suggesstions/recommendations: We are going to upgrade our OS from Solaris 8 to Solaris 10. So, I wonder whether we need to apply any patches on DB/application servers/Web servers as well. What will be impact on Ap
-
Aut. cursor jump to next cell/field in Web Dynpros ALV
Hi all How do I get the cursor in a cell to jump automatically to the next cell when the user enters the last character? Any help is greatly appreciated. Regards Lars Romer