BOE XI 3.1 + SAP Integration Kit on AIX 5.3 with WebSphere 6.1 (SOLVED)

Hi everybody!
On a recent installation I encountered a problem with SAP Integration Kit using BW Query with prompts; I want to share with you what I did to solve this problem:
First of all, the environment:
IBM Server with AIX 5.3
BO Repository on DB2 9.5
Application Server IBM WebSphere 6.1
BOE XI R3.1
Crystal Reports 2008 SP1
After installing and configuring everything on the system, I encountered some problem launching in InfoView reports created with Crystal Reports 2008 based on BW query with SAP Prompts.
The error that I recieved everytime was:
com.sap.mw.JCO.$Function
What I did to solve this was:
1) Configure the absolute complete classpath inside the Application Server (path/sapjco.jar)
2) Put the sapjco.jar version 2.18 at 32bit (unix version) that you can download at  https://websmp108.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000463654&
Hope this helping you
Bye
Andrea

Dear Gurus,
The issue I am facing is described exactly in the document "Upgrading to CR 2008 V1 / SP1" by Blair Wheadon.
The problem occurs when installing CR2008v1 and BOE 3.1 on the same machine.
The solution is to download and install SP1.
Unfortunately for me, I have downloaded SP1 but the installation is not going well.
Message prompts that installation files are corrupt and that I should download again.
I have downloaded twice. And tried several times.
So I guess it might be due to the platform.
But why wasn;'t the message displayed after BOE3.1 installation was completed?
Do you guys have an idea?
Alice

Similar Messages

  • BOE 3.1 and SAP Integration Kits 3.1

    I have installed BOE XIR 2, and DataService 3.0 on this machine (machine A).
    I dont use much on XIR2.
    I build some simple data flow in DataService 3.0, the DataService use the BOE 3.0 that sitting on the other machine (machine B).
    Now I have downloaded new BOE 3.1 and would like to install the SAP Integration Kit 3.1 on mcahine A.
    I have uninstalled BOE XIR 2 from machine A. (I noticed that the Tomcat is still there, can't be uninstalled).
    I have now installed BOE 3.1 on mahcine A. Everyting seem OK, and I point back to use the existing Tomcat.
    Installation finish, no error.
    I now go to Start ->Program ->BOE 3.1 menu, I dont get to see the BOE InfoView and BOE CMS.
    When I click on the Start ->Program ->BOE 3.1 ->Designer, on the Designer logon screen, it is Machine B that appear on the System field. When I change to Machine A manually and logon, I have error message.
    Any idea why the BOE 3.1 InfoView and CMS is missing?
    Why it is machine B appear as the System?
    Why I can't change manually to machine A? It seem like the CMS is missing, but why?
    Please help, need this to demo the client...

    no

  • Want: Step by step instructions to install SAP Integration Kit: BO vs BI/BW

    Hi,
    Because of my knowledge in BI/BW, I have been assigned the task to install
    1. SAP Integration Kit to integrate Business Objects with our SAP BI 7.0 &
    2. SAP Integration Kit to integrate Business Objects with our SAP BI 3.5?
    Would you happen to know where I can get hold of step by step instructions to achieve this goal?
    In brief, I need a
    Step by step instructions to install and configure SAP Integration Kit: BO vs BI/BW as a beginner.
    Thanks

    Hi Amanda,
    try the following link:
    [https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a00ee3b2-5283-2b10-f1bf-8c6413e0898f]
    Regards,
    Stratos

  • BOE SAP integration kit issue - Java connector

    I am trying to install BO applications on one of the TPC system (TPC5).
    BOE XI 3.1 Sp3 (using tomcat)
    SAP Integration Kit SP3 win for IA32bit
    For java connector i am using files from sapjco-ntintel-2.1.8 (tried using 2.1.9 and 3.0.5 as well)
    BOE installation goes thru fine and Java Info view, CMC all works fine
    Now when i try installing the integration kit it gives some problem during identifying the java connector
    I did save the sapjco.jar file in C:\program files\business object\tomcat55\shared\lib folder as specified in all installation guides
    But still it do not identify it properly and says Java infoview might not work properly.
    So i still go ahead and see that Java infoview doesn't work. Neither does the CMC.
    Though WebI still works fine and can acces data from SAP BI system properly.
    I have looked a lot into forums but couldnt find the reason other than placing librfc32.dll, sapjcorfc.dll and sapjco.jar files in respective places.
    (i did register the librfc32.dll using regsvr32 librfc32.dll)
    I have tried installing and uninstalling this couple of times.
    Also when i only uninstall the integration kit. Somehow the CMS server stops and doesnt start again.
    and hence have to uninstall BOE as well. Any trick here will help too.
    Could it be the SP3 version of BOE or SP3 version of the integration kit?
    Or
    Could I be missing some step?
    Thanks
    Ritesh

    Hi Ingo,
    I have installed it couple of times and since it didnt work I uninstalled it along with BOE and Crystal reports.
    Now, I again installed only BOE and crystal reports.
    I did try installing the integration kit but since it donot recognizes the Tomcat Web application server in the 3rd step
    I donot proceed ahead.
    The SAP Java connector file (sapjco.jar) is placed in a folder
    C:\Program Files\Business Object\Tomcat55\shared\lib\
    When running the integration kit, in the 3rd step when is asks for configuring the tomcat server it
    has a default path of
    C:\Program Files\Business Object\Tomcat55\
    On clicking next it says files not found.
    So i change the path to
    C:\Program Files\Business Object\Tomcat55\shared\lib\
    On clicking next it brings up a pop message saying
    No Compatible Web Server found.
    I stop there and exit the setup process
    I tried verifying the version of librfc32.dll which is installed along with the installation of the SAP GUI (710)
    Then for the SAP connector i download it from the service.sap.com\connectors the 2.1.9 version for 32bit
    And copy sapjco.jar file into the above mentioned folder and
    copy sapjcorfc.dll into C:\windows\system32 folder.
    And then run the integration kit.
    Thanks
    RItesh

  • SAP Integration kit for BO XIR2 with Crystal XI for BI 7.0 Front end

    Hello Team,
    We are in a little fix.
    We have BOE XIR2, Crystal XI and working with old version of BI front-end 3.5.
    We are upgrading to BI 7.0 frontend, but I am not able to trace out the SAP Integration kit for combination of BOE XIR2, Crystal XI and BI7.0.
    Is such a thing available, If yes can someone send a link to that.
    Regards
    Lalan Kanade

    Hi,
    Thanks for the quick reply
    I could trace this document.  "BusinessObjects Enterprise XI Release 2 SP3 for Windows"
    I checked in "Supported Data Sources for Crystal Rep" section, extract below
    SAP BW Server 3.0b SAP GUI 620 or 640
    SAP BW Server 3.1c SAP GUI 620 or 640
    SAP BW Server 3.5 SAP GUI 640.
    But we are using BW Server 7.0 with GUI 7.1 and that working fine even with BOXIR2 and Crystal XI with Old Front End for BI 3.X.
    But when we are testing with BOXIR2 and Crystal XI with BI New Front End 7.0 its missing components from the query output.
    So the SAP Integration kIt seems old & we need a new Kit which would work with BI New Front End 7.0.
    Any suggestions on that
    Regards
    Lalan

  • Crystal Report XI R2 compatablity with SAP Integration kit

    Hi All,
    we have suggested to one of our customer  the Customized pack of BO XI Edge series which include the licensing of Xcelsius , WEBI , Universe designer, SAP Integration kit and Live office...
    He dont want to pay extra for taking the license for cryatal report 2008 as they already using the Crystal Report XI R2 version which they use to do reporting on non SAP data.
    My question is :
    1 - Now they want to do reporting ove SAP data using the existing CR solution they have is it possible ??
    2- Will the integration kit support the CR XI R2 version ??
    3- Can he publish the Crystal Report created by CR XI R2 to the Business Object Edge Series plateform ??
    They just want to use CR to do reporting on data from R/3 side .
    Kindly suggest.
    Regards,
    Mishra,Vibhav.

    Dear Ingo,
    Thanks for the reply.
    Actally we have suggested to our client the latest Edge Series Standard pack solution , excluding the crystal report licensing.
    My question is will the integration kit which comes along with the Edge series will support the existing Crystal Report XI R2 and can the it be integrated with BOE(can he publish the reports created with the earlier version to the Business Object plateform).
    If the above sceanario is not possibe then we have to purchse the older version of integartion and i doubt if we can purchse it stand alone in that case we would be having two integration kits running to solve the purpose.
    Kindly suggest.
    Warm regards,
    Mishra Vibhav

  • BO XI 3.1 SP3 - SAP Integration Kit: Transports

    Hi All,
    My question is regarding the transports that need to be imported into SAP system so that it can connect with BOE. We are connecting our BW system with BOE, please let me know whether we need to move all transports in BW system only or we have to move transports in R3 system as well.
    Thanks in advance.

    Hello Ingo,
    Please help us in solving the below issue:
    We have installed BO XI 3.1 version with the following configurations.
    Windows 2003 Server, SP2 64bit Version
    Java: JDK 1.7 and JRE 1.7
    BW: BW 3.5 version
    BOE in Tomcat 5.5 App server
    SAP integration kit 3.1 32 bit (51040568.zip)
    The issue is that while integrating BOBJ with BW to import all the roles for SSO, we are unable to find   the exact JCO files for doing the same. We tried with JCO 2.1.8, JCO 2.1.10 and JCO 3.0, but all the versions turned futile. After the initial installation with JCO 2.1.8 version (as per to Installation guide) we found neither CMC nor Java Infoview are working.
    Please help us in identifying the right JCO for the proper installations and do we need to install SAP integration kit 3.1 SP3 ? This is pretty urgent
    Regards,
    Rajib

  • SAP Integration Kit installation - BW Publisher parameters

    Hi,
    We are working on an BO GRC RM 3.0 scenario (Windows/SQL Server). As per architecture requirements we are currently installing BOBJ Integration Kit for SAP. However the following doubt comes up. As per architecture requirement also, and as it was defined for our scenario there is no need for an BI system (AS JAVA was installed only as EP usage type) if the reporting is going to be used with BOE Crystal. What we need there, is to install and BOBJ SAP Integration kit on BOE XI 3.1 server and to import Crystal transport files in AS ABAP (SAP_ABA, SAP_BASIS, PI_BASIS, SAP_BW).
    During the Integration Kit installation process we are being prompted for BW Publisher parameters where an RFc to a BW system is required. As mentioned earlier, we donu2019t have an BW system since BOE Crystal will be used instead of WebDynpro ABAP ListViewer...Are we using the incorrect Integration Kit? Should I install BI_Content Add-on installed on AS ABAP even when reporting is going to be used with Crystal Report?
    Hoping being clear enough, please let me know if I can proceed with Integration kit installation in this way or should I have some other precautions for this particular solution implementation.
    Thanks and best regards.

    Hi,
    in case you do not have SAP BW as part of the landscape then there is no need to install the publishing component
    Ingo

  • No Connection after installing SP 2.3 for SAP Integration Kit

    Hello Community!
    We just installed Service Pack 2 and Fix Pack 2.3 (in this order) for SAP Integration Kit on one of our client's servers. Before that everything worked fine. After the installation I verify the CE connection in /crystal/rptadmin. The result is:
    Unable to log on to Enterprise system. Reason: Unable to log on: Could not connect to server vm103:6400.  Please check that the server name is correct, and that the server is running.
    I checked the RFC connection in sm59 but that works normally. BW Publisher Service is also running. The servers (BW and BO) are on the same machine: Windows 2008, 64bit, SQL Server, BOE XI 3.1 SP 2.
    The BW Publisher Trace log shows the following entry:
    [Fri Feb 26 12:45:57 2010]     1480     6084     SAP bwcepub: Tracing is enabled.
    [Fri Feb 26 12:46:17 2010]     1480     6084     Entering CPubReqPing::Process(1)
    [Fri Feb 26 12:46:17 2010]     1480     6084     Logging on to Crystal Enterprise
    [Fri Feb 26 12:46:23 2010]     1480     6084     ERROR: .\system_connectors.cpp [479]: l_pSessionMgr->Logon(l_bstrUserName, l_bstrPassword, l_bstrCMSName, l_bstrAuthMethod, &m_pSession) failed with return code l_hr = -2147219455
    [Fri Feb 26 12:46:23 2010]     1480     6084     Leaving CPubReqPing::Process(1)
    [Fri Feb 26 12:46:23 2010]     1480     6084     Dispatch returned with code 0 and message [See RFC trace file or SAP system log for more details]
    When I try to log into BO Info View or CMC with my SAP credentials CMS crashes without any logs!
    This is now the 2nd server with that issue!
    Any ideas what this could be?
    Thank!
    phil

    No, this happens only by logging in with SAP credentials.
    CMS log file shows a huge list of entries like this one:
    .\pluginhelper.cpp:276: TraceLog message 1
    2010/02/26 11:46:49.316|>>|A| |  936|6040| |||||||||||||||assert failure: (.\pluginhelper.cpp:276). (0 : Error reading pin file E:\Business Objects\BusinessObjects Enterprise 12.0\packages\BusinessObjects_ClientActionSet_CrystalReport_UploadSet_dfo.xmlwarnings:
    errors:
    fatal errors:
    Fatal Error in file: E:\Business Objects\BusinessObjects Enterprise 12.0\packages\BusinessObjects_ClientActionSet_CrystalReport_UploadSet_dfo.xml, line: 1, col: 1, Message: Invalid document structure
    But I've got these entries on other systems too...

  • SAP Integration Kit doesnu00B4t see Universe Designer Installation

    I installed BOE Enterprise Client Tools XI 3.1 on my machine and updated to most current SP and FP.
    When I want to install SAP Integration Kit, I get the message "No Crystal Reports or Universe Designer found".
    What can be the issue?
    Edited by: B.Wegner on Nov 18, 2010 10:47 AM

    Hi
    Here what i mean was
    first install BOE 3.1
    Then SAP IK 3.1
    Now install BOE 3.1 Latest SP/FP
    Then Install SAPIK 3.1 Latest SP/FP
    Regards
    Ashwini

  • Error after uninstalling the SAP Integration Kit XI 3.0 on Unix

    Hi all,
    I have uninstalled the SAP Integration Kit XI 3.0 on a single solaris server installation. Uninstall was done exactly as instructed in the manual and everything looked ok.
    Now when I try to go to the login page of CMC or InfoView I get an error:
    type Status report
    message /PartnerPlatformService/service/app/logon.do
    description The requested resource (/PartnerPlatformService/service/app/logon.do) is not available.
    Is the login page trying to look for the SAP authentication page that was removed ?
    Is there some configuration still remaining somewhere that needs to be removed so I get the old login page back ?
    Thanks for ideas, Timo

    Thanks for pointing to the right direction. I changed the tomcat webapps web.xml file parameter and it was enought to start working again.
       <context-param>
            <param-name>config.logon.service.context</param-name>
            <param-value>/PlatformServices</param-value>
        </context-param>

  • Error while installing SAP integration kit 3.1

    Hi,
    I installed SAP integration kit 3.1 on one server and it is working fine but when i am installing same installable on another server it is giving error as "Installation ended prematuarly because of an error". I dont know how to debug the error. Please help me.
    Thamnks in advance

    Hi Sonali,
    had a similar problem on a Windows/Tomcat system. The installation was crashing before trying to deploy the .jar files. If you are facing the problem in a similar environment please make sure that you have copied the librfc32.dll and the sapjco.jar files in the correct directories. Especially for sapjco.jar doublecheck the path you have copied the file into.
    Regards,
    Stratos

  • Crystal Developer XI without Sap integration kits cant see released Queries

    Hi All!
    When I'm used MS Excel, I can see released SAP BW Queries via SAP OLE DB access. But when I'm used Crystal Developer XI (without Sap integration kits), I can’t see released SAP BW Queries via SAP OLE DB access.
    What's a problem here?
    WBR Artem

    Hi,
    you missing the SAP integration Kit. To conenct to SAP BW you need the SAP Integration Kit installed.
    ingo

  • Default language settings in SAP Integration Kit?

    Hi everybody,
    I've the following problem:
    If I create a report with the SAP Integration Kit (create new report from a query) I get a prompt where I can type in (System Number, User, Password and LANGUAGE). If I now choose as language u201CEnglishu201D and create a report, save it and open it in crystal again, everything is still fine. But if I go to refresh the report, I get a prompt where I can choose the SAP BW and type in the System Number, User and Password but not the LANGUAGE. After the refresh the names of the fields are still in English but the data is now in German (or just the technical names, depends on the language settings in the query).
    For me it looks like that the language settings of the refresh are by default in crystal is set to German, but the software is English. I didnu2019t find any way to change the default language to English or save it in the report.
    I already tried to change the language/regional/keyboard settings of my machine and also tried to change the language in the crystal formula field u201Clanguagecode%u201D.
    But even if I could have a unique change in some system settings, it really will not help me, because I have some queries in German and some in English, depending on the actual BW system.
    If the SAP Integration Kit gives me the possibility to choose the language during the creation of the report it should then remember the choice!?
    Thank you for your help

    Post your question to the Business Object Integration Kits forum

  • How to import the transports from the SAP Integration Kit into SAP system

    Hi expert,
    I read the forum "Re: Integration with SAP R/3 to realise i have not done the import of transport but i don't quite understand the statement give by "Sebastian Li".
    "Unpack the SAP Integration Kit zip-file. It contains a transport-folder. Here you'll find a short manual which files you should import.
    Copy the needed files on your sap-system in the correct folders:
    - usr\sap\trans\cofiles
    - usr\sap\trans\data
    Use the transaction STMS.
    Also take care of the sequence of importing. See the manual for details."
    Can some one explain it in more details to me. I have unzip the SAP Integration Kit n in the transport folder got 2 more folder "ansi" and "unicode_compatible". How do i know which 1 to use? Where i should copy this files to?
    Please advice.
    thank you

    Hi Rajesh,
    check this : logon failed. you do not have the necessary rights to design reports
    @Sri

Maybe you are looking for

  • How to connect my "home sharing" to access my music, even when my computer is off?

    Okay, I can't figure out how to access my music from my iTunes on my Apple TV when my Macbook Pro is off. I need help.

  • Problem with batch inputs

    Dear All Could you advise me, we have many batch inputs stored in our system, some of them are very old one. What is SAP recommendation? How long batch inputs should be stored? Maybe you have some experience in this matter and can advice us> Thank yo

  • Exchange Calendar - Accepting Appointments Fails

    Using ActiveSynch on Exchange 2003 Server to access corporate email and calendar. When accepting an appointment invitation on the iPhone, the only thing that happens is an email containing an ".ics" appointment file attachment is sent to the organize

  • Authentication Failed - newbie

    I am managing 4 other systems, which all have the same admin user name and password. 2 of the systems I cannot Observe/Control/Curtain. I can chat, message, install etc... Each time I double click on them I get 'Authentication Failed to "X Machine"'.

  • MySQL - can't see database fields

    I've set up a really simple database with names and addresses in it. I want to pull out records based on the State. When I set up my recordset, in the "Columns:" field, it says "No columns found." What did I do wrong in setting up my database. When I