Bonjour 2.0.2.0 on Windows 7 fails while VM is running
iTunes 9.2.0.61 on 64bit Windows 7 (i7 core) transmits to remote speakers and works just fine, until Windows Virtual XP machine (from Win7 Professional built-in VM support) is started, then Bonjour starts generating errors in event log and reporting remote speakers were disconnected remotely, dropping them from the iTunes remote speaker list. Stopping the VM and re-starting iTunes and the remote speakers are back. No Apple products are installed on the VM.
Any hints on making Bonjour work while VM is active?
Since you have Win7 Pro, see if this will help
http://www.microsoft.com/windows/virtual-pc/
Also, some other reading
Win7 Help http://social.technet.microsoft.com/Forums/en-US/category/w7itpro/
Compatibility http://www.microsoft.com/windows/compatibility/windows-7/en-us/Default.aspx
Adobe Notes http://kb2.adobe.com/cps/508/cpsid_50853.html#tech
Optimizing http://www.blackviper.com/Windows_7/servicecfg.htm
Similar Messages
-
When opening PT Assembler, Windows tries & fails to open NI Run-Time engine
I am using PT Assembler, a front-end for the Panorama Tools software bundle, to stitch microscope images taken by LabVIEW using the QCam Suite. Whenever I attempt to open PT Assembler, Windows informs me that it needs to configure the NI LabVIEW Run-Time Engine 7.1.1, which it cannot as it is not installed. After cancelling the configuration 4-5 times, my program opens and runs without errors.
PT Assembler has absolutely nothing to do with with NI or Labview as far as I can determine, so why does Windows try to open it with the run-time engine? I attempted to install the 7.1.1 engine from ni.com but was informed that it was unavailable. Is there any way I can keep Windows from attempting to use the engine? I could install a later version of the engine and hope it works, but I am a bit leery about how it might affect my program.Hi rhazelton,
If this program hasn't been created in LabVIEW, then I'm not sure why it would be doing this.. However, you should be able to download the 7.1.1 run-time here. Give it a try and see what happens!
Regards,
Brian A.
National Instruments
Applications Engineer -
Windows programs fail to install or run with Win8 on my iMac
Two up to date programs for Windows OS either wont install or won't run on my parallels facilitated iMac - CorelDraw & WordPerfect. How can I make them do so?
Most people on this forum do not speak Windows, I'd recommend checking with the developers of each app and see if they are designed to run on Windows 8.
-
Windows 7: Windows Backup failed 0x81000031
Windows backup ran, and my once-pristine and empty backup drive now has something filling its space, so I assume some files were successfully backed up. Thing is, the Action Center icon has the red x on it and it comes up with one issue: Check, your backup (Important). Clicking this issue produces the following dialog:
Windows Backup: Troubleshooting Options
Check your backup
Windows Backup failed while determining libraries location of one of the users included in the backup.
Details: BitLocker Drive Encryption cannot be used because critical BitLocker system files are missing or corrupted. Use Windows Startup Repair to restore these files to your computer.
Options:
*Try to run backup again
*Change backup settings
Error code: 0x81000031
Thing is, I'm using home premium. I don't see bitlocker as an option and I'm not terribly enthused about having to repair bitlocker when I can't use it to begin with. (Primarily, because I use Windows 7 Home Premium. Even if I used a version which supported bit locker, I'd never use it to begin with - I lack a TPM chip which means that anybody who has physical access to my machine could compromise my security regardless of bitlocker, it'd just take slightly longer for them if bitlocker were present.)
I'm digressing, the point is I don't use bitlocker and I don't know how not having bitlocker prevents Windows 7 from copying files from one drive to another and making a note in a logfile that the files were backed up. I realize I simplify the method of backing files up but it doesn't get much more complex than copying them to a separate location and timestamping them.
tl;dr: Windows Backup produced error code 0x81000031 because bitlocker drive encryption cannot be used. I don't want to use bit locker drive encryption I just want to back my files up to an external drive. Suggestions? Preferably ones that don't make me run Windows Startup Repair.Well 4 years later same problem simple fix, did every thing else as suggested by microsoft sys repair start up repair etc etc and just removing the drive that was included in library fixed the issue i have spent hours on
now have to reinstall all that sys restore removed...SO EVERYBODY do what Sneha said first..
Clicked "Start", then "Computer".
Right clicked on the "Library" I wanted to modify, and selected "properties".
Immediately saw that my DVD drive was an included folder in the library.
Clicked on the drive in the list, and the Remove Button became active.
Clicked on "Remove" and it removed the drive from the list.
Clicked on "Incude Folder" and added in my real backup folder location (not required, I just want a libray connection to
it).
Clicked on "Ok". thanks ath1234 for the process..Cheers -
Windows Install fails to detect VSTO 4.0 in Windows machine
I’ve to install excel based application developed in VS 2010.
Windows installer fails while detecting VSTO in Windows 7/8/8.1. Its perquisites are .Net framework 4.0 client frame work and VSTO 4.0.
Even we have installed VSTO manually and re-run our setup and again we are getting the same error (“Installer was not able to automatically download the VSTO installation”), the custom message. Don’t know what is blocking to detect VSTO on some particular
machine. I'm using only this condition "VSTORUNTIMEREDIST>="10.0.30319" as in Launch Conditions from last 3 years.
Now from last couple of months I'm getting this error when instating my application, somehow when I add another condition i.e. VSTORUNTIMEREDIST>="10.0.30319" OR OFFICERUNTIME>=”10.0.21022”, it works properly.
I want to know that is there any windows patch is released due to which my installer is not able to detect VSTO in machine.
Thanks in advance.
Thanks Utshek Jain> Is VSTO Runtime detection depends on full edition of .NET framework?
I have never seen the client profile mentioned in MSDN. For example, take a look at the
Running Solutions in Different Versions of Microsoft Office article which provides the following info:
Version of Office targeted by the project template
Target .NET Framework of the project1
Versions of Office that can run the solution
Required runtime on end user computer
Office 2013
.NET Framework 4
or
.NET Framework 4.5
Office 2013
Office 2010
2007 Microsoft Office system2
Visual Studio 2010 Tools for Office Runtime
Office 2010
.NET Framework 4
or
.NET Framework 4.5
Office 2013
Office 2010
2007 Microsoft Office system2
Visual Studio 2010 Tools for Office Runtime
Office 2010
.NET Framework 3.5
Office 2013
Office 2010
Visual Studio 2010 Tools for Office Runtime
2007 Microsoft Office system
.NET Framework 4,
.NET Framework 4.5,
or
.NET Framework 3.5
Office 2013
Office 2010
2007 Microsoft Office system
Visual Studio 2010 Tools for Office Runtime
BTW Did you include the required interop files in the installer? -
bonjour à tous, je viens d'installer windows 7 avec bootcamp.L'installation semble s'être bien passée.Au demarrage du mac quand je choisis window7, alors j'obtiens un ecran noir avec un trait qui clignote et la machine redemarre sans cesse. Une solution?
But at startup when I choose windows 7 I get a black screen with a clignottant dash and mac starts ever.
If You Have Problems Installing the Device DriversIf it appears that the Boot Camp drivers weren’t successfully installed, try repairing them.To repair Boot Camp drivers:
1 Start up your computer in Windows.
2 Insert your Mac OS X installation disc.
3 If the installer doesn’t start automatically, browse the disc using Windows Explorerand double-click the setup.exe file in the Boot Camp directory.
4 Click Repair and follow the onscreen instructions.
If a message appears that says the software you’re installing has not passed WindowsLogo testing, click Continue Anyway.If you need to reinstall specific drivers, you can install one driver at a time. For example,if your built-in iSight camera isn’t working, you can reinstall just the iSight driver.
Individual drivers are in the Drivers folder on the Mac OS X installation disc.
To reinstall a specific driver:
1 Insert your Mac OS X installation disc.
2 Quit AutoRun if it opens.
3 Using Windows Explorer, locate the driver that you want to reinstall.
4 Open the driver to start the installation.
https://discussions.apple.com/thread/3301234
OS X Lion: About Lion Recovery
https://support.apple.com/kb/HT4718
https://support.apple.com/kb/HT5034
Boot Camp 4.0, OS X Lion: Frequently asked question
http://support.apple.com/kb/HT4818
http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf
create a Windows support software (drivers) CD or USB storage media
http://support.apple.com/kb/HT4407
Installation Guide Instructions for all features and settings.
Boot Camp 4.0 FAQ Get answers to commonly asked Boot Camp questions.
Windows 7 FAQ Answers to commonly asked Windows 7 questions.
http://www.apple.com/support/bootcamp/ -
5, it says, "There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor." I have Windows XP and I need help.
After reading all these posts, one by one did not resolve my problem until I got the very end. Regardless of what step would resolve your problem, these are the steps I would recomment to everyone for a what seems to be a safe and fool-proof upgrade to iTunes 10.5.
1. Stand alone upgrade to the latest Quicktime version
2. Go to control panel and "change" then select repair to the following applications in the order specified by the post on Oct 27. (Notice I skipped Quicktime because it had been upgrade manually,and Bonjour did not have a "repair" option)
iTunes; Apple Software Update: Mobile Device Support; Apple Applications Support
Some of these applications may not appear if they do not apply to your configuration (no iPhone, or no iPad, or other apple devices).
Once all updated, I did not need to restart nor launch any applications, I simply went straight into the 10.5 upgrade, and where it normally got stuck, this time the installation continued for a while longer until it completed successfully.
Great work everyone who contributed! Thank you very much! -
Each time I attempt to download the new itunes 10.5 I keep getting the following error message:
Product: Apple Software Update -- Error 1722. There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. Action SoftwareUpdate_UnregServer, location: C:\Program Files\Apple Software Update\SoftwareUpdate.exe, command: /UnregServer
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Any Ideas of how to solve this one?After reading all these posts, one by one did not resolve my problem until I got the very end. Regardless of what step would resolve your problem, these are the steps I would recomment to everyone for a what seems to be a safe and fool-proof upgrade to iTunes 10.5.
1. Stand alone upgrade to the latest Quicktime version
2. Go to control panel and "change" then select repair to the following applications in the order specified by the post on Oct 27. (Notice I skipped Quicktime because it had been upgrade manually,and Bonjour did not have a "repair" option)
iTunes; Apple Software Update: Mobile Device Support; Apple Applications Support
Some of these applications may not appear if they do not apply to your configuration (no iPhone, or no iPad, or other apple devices).
Once all updated, I did not need to restart nor launch any applications, I simply went straight into the 10.5 upgrade, and where it normally got stuck, this time the installation continued for a while longer until it completed successfully.
Great work everyone who contributed! Thank you very much! -
New Windows laptop fails to print to Mac-shared printer
I prevoiusly had a shared HP DeskJet 5900 shared from my PowerBook G4 to a Toshiba Windows laptop via Bonjour. The printer was set up as a generic Postscript printer and printing worked fine.
I replaced the PowerBook with a MBP C2D and the Windows laptop with a Sony Vaio, and this same printing arrangement no longer works. Setting up the printer in Windows goes fine. The Bonjour printer setup assistant finds the shared printer just fine, and set-up appears to succeed, but printing from any Windows app fails with the error message, “Printing failed because an error occurred.”
What am I doing wrong?…On the VAIO, are you still creating the
printer as a Generic PS? I've seen problems when you
add the Windows driver for the printer instead of
setting it to PS (the Mac does the conversion so it
is recommended to leave it set this way).
Yes, it’s Standard/Generic Postscript, although I also tried setting it up with the appropriate printer-specific Windows driver with the same result.
It might be worth checking Console in the MBP to see
if there is a better explanation as to what is going
wrong. The cups error log may be helpful (providing
the spool file is getting to the MBP).
Good idea. Unfortunately nothing shows up on Console. I suspect the connection is failing entirely on the Windows end.
However, the connection does work on the file-sharing level. In a Windows Explorer window, I can successfully browse \\[Mac name]\ and see the printers as well as shared files -
Error: Windows Vista failed to start. A recent hardware or software change might be the cause
PLEASE HELP!
My Lenovo SL500 is not working at all - I get error: "Windows Vista failed to start. A recent hardware or software change might be the cause"
I tried the following on my Lenovo:
Windows repair menu = "windows cannot be repaired"
Lenovo Rescue and Repair
Rescued my files from Hard-drive (copied to external hdd)
Restore System = Failed
Diagnose hardware = HDD passes all tests
Don't know what else to do with = Boot from another device ? Access BIOS?
Because I do not have the windows vista install disks
I purchased and downloaded the recovery disks from neosmart.net
The neosmart windows vista recovery disks DO NOT WORK = Error is "Unable to find any valid Windows partitions on this computer".
The Hard-drive exists because I was able to back-up files from HD through (Lenovo Rescue & Recovery Rescue files). So there is a hard-drive.
I don't know what to do next?
Last resort is to Factory Restore via either the Lenovo R&R or Windows Vista Recovery Disks (neosmart)?
Will I still have windows?
PLEASE HELP!Hi, Josemne
Yes, if you can restore the system through Rescue & Recovery, then you will still have WIndows on your machine, but all your files will be deleted from the hard drive. Luckily, you have already saved those files elsewhere. I would recommend trying to restore the system and see if that works.
Best,
Adam
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it. -
Windows 7 failing to install through bootcamp on iMac 27" late 2012
Hello.
I have recently received my brand new iMac 27" late 2012, and am trying to get it to install windows 7.
My machine is running 10.8.4 with a 3.4 GHz Intel Core i7, 16 GB DDR3 RAM and 500GB SSD drive.
I launched bootcamp and went through the usual bootcamp standard steps, and after it partitions and restarts, the windows installation stops at the point of choosing a partition.
To elaborate, after the windows setup starts, and I click install windows, it asks me to choose a partition. It happens to be Partition 4 BOOTCAMP (the one that bootcamp supposedly prepared for windows as an NTFS partition.
It does not recognize it as NTFS. I click on advanced options and click format, but it takes a split second and never really formats. The only thing that changes at this point is the name of the Partition (the word BOOTCAMP disappears from the partition name). Another thing I tried after reading full threads for 4 days straight is that I click delete to delete the partition, then on the now unallocated space partition, I click *New to reallocate/format the partition. It also takes no time to turn this into a partition supposedly ready for windows, but it never allows me to choose it and go next to start installation.
I have done this about 8 times now and I am starting to worry about damaging my SSD because of all the partitioning and unpartitioning.
Here are a list of things I have done:
1. made an ISO image of the windows 7 (64 bit of course) and ran that on a USB
2. downloaded the ISO image from the microsoft website and ran that on a USB
3. used an exernal optical drive to run the windows setup using the windows installation DVD instead of the USB ISO image.
I have made sure everything is fully updated, had a friend install windows on his macbookpro retina with an SSD running the same OSX and it worked just fine.
*a small note that may or may not be of importance is that when in the list of partitions in the windows installation I click on Load Driver, it does not detect any drivers although the USB with the drivers that BOOTCAMP created earlier on the Mac side is inserted in the machine and detectable.
What is it that I'm missing?SOLVED IT!
after 5 full days of research and trial and error (only error and no progress) and after I had hit almost every wall there is, I thought of reviewing all the elements that make up the set up.
1. iMac
2. windows 7 installation (i had both optical drive for the dvd as well as an image on a USB)
3. usb stick with the drivers on it.
the iMac i trust.
windows i doubted. so i went ahead and checked the format of the usb on which i had the drivers. weirdly enough, both were exFat, which is created by windows - supposedly.
I decided to change the format of the USB with the drivers on it to FAT. re-downloaded the drivers on it and restarted... and it worked !
Although it does not make sense at all, but windows was reading from the image on one USB which was exFat, but was not reading the drivers on the other USB.
My guess is that the reason is the Mac OSX was reading the windows through the exFat and that was working, but the windows was not being able to read its own format on the other USB. Typical windows weirdness.
In any case, I hope if someone has the same kind of trouble they would be able to benefit from this post.
Also, maybe its worth noting in the instructions of BOOTCAMP.
Thanks for those who took the time to read it.
b. -
Bridge CS3 (Windows XP) fails to start because Symlib.dll was not found
Bridge CS3 (Windows XP) fails to start because Symlib.dll was not found? How do I fix this? I've re-installed and the auto updater has run...I even downloaded and ran the patcher application? By the way Bridge CS3 doesn't show up in the CS3 program list in the start menu but it is installed in my program files - I've tried launching it directly from there as well. Bridge CS2 is operating just fine.
Update: I installed and ran the Adobe Support Advisor, resulting in - Issues: "The module found no solutions to report for the selected log file."
I tried to package the report and the error read: "The size of the package is too large to be handled with the current configuration! Please contact Adobe Support for additional information."
I opened a web based report/case number at the Adobe Support Portal about the missing Symlib.dll (including the Adobe Support Advisor error). Their response was: We regret to inform you that complimentary support for your product is not available and/or has expired.Did Bridge work before? If so, reset preferences by holding down the Ctrl key when starting Bridge. If successful you will get a Reset Window, choose all 3 options.
-
I am trying to setup my Time capsule via a ethernet cable as a back up for a new iMac. The on button on the time capsule set up window keeps failing to stay on. Any ideas what to do?
A PC can have more issues connecting than a Mac.
But it really should not matter.. so just try it in situ.. press and hold the reset.. once it starts up, it will return to default IP, 10.0.1.1 the PC should then be able to find it via the airport utility.
If not drag it over to the Mac and plug in there by ethernet.. or since it is a laptop, really should not be that difficult to drag the Laptop and plug it into the TC.
Important thing is to get access to the TC.
The Mac if it is running lion, then you MUST download and install 5.6 airport utility to do anything useful.
http://support.apple.com/kb/DL1482 -
Here is what I am running:
Microsoft Windows 7, Service Pack 1, Fully updated to 4/10/2012
Fresh Install of Firefox 11. No add-ons enabled as a result of troubleshooting.
I am a user with administrator rights
UAS is disabled.
To begin, this has been going on Since Firefox 10 or so. A few months now.
I am able to open Firefox. My add-ons worked (ABP, Flashblock, ABP Element Hiding Helper, IETAB2, Downthemall, Greasemonkey, 4chan extension) had no problems. Firefox is set and has been set for the last two years as my default web browser.
However Since approximately Firefox 10 or so, maybe before that, If I have a Firefox session open, and any other application attempts to open a session in a new window, I get the Firefox is already running, but not responding error."
I attempted to follow troubleshooting advice already posted (look for parent.lock files left behind [none present], multiple sessionstore.js files [none present], create a new user profile, attempted to clear out the "read-only" permission in windows 7, however as soon as it is cleared, the read only permission returns.)
As a last resort, I deleted the Firefox folder, the %APPDATA%/Mozilla directory in its entirety, then utilized CCleaner to remove any and all references to Firefox in the windows registry, then did a full re-install, no extensions installed right now.
I checked preferences and have the option "open new windows in a new tab" checked off. The problem persists regardless if this option is checked on or off. This problem persists in or out of safe mode, even with the brand new install.
Test Cases:
All cases:
Firefox is selected as the default browser for windows 7
Case 1: Open a firefox session. Utilize any other program that attempts to open a link to their website in a new browser window or new browser session. Experience "Firefox is already running" error
Case 2: Open a firefox session. Right click on Firefox on the task bar. Select "open in new window". Experience "Firefox is already running" error
Case 3: Open a firefox session. Select the Firefox Menu > New tab > New Window. A new window will actually open.
This is the only method of opening a new window in the same browser session or profile that actually works on my system. Attempting to open a browser session from the task bar "open new window dialog" or opening a new window while a current window/session is running will not open firefox in a new window or a new tab in the current session. The "Firefox is already running, but is not responding" error will occur every time.Cor-el's suggestion resolved my problem. Apparently the MOZ_NO_REMOTE variable was set to 1 on my system variables. I never made it, and really have no idea how it got there, but deleting this variable and restarting firefox has resolved the issue. Thanks Cor-el!
Marking case: Solved
Solution: Verify the MOZ_NO_REMOTE variable is NOT set to 1. This can be achieved by simply deleting this variable. -
Just updated firefox. While trying to run it show error message : "The application or DLL C:\Program Files\Mozilla Firefox\sqlite3.dll is not a valid Windows image. Please check this against your installation diskette." Tried to download and install new firefox, but it alway show that the file is corrupt
== Today ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729; InfoPath.2)Do a clean reinstall and download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
You can skip the step to create a new profile, that is not necessary for this issue.
See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall
Maybe you are looking for
-
How can I import an ibook file back into iBook Author?
I exported an ebook from iBook Author thinking it is the equivalent of saving the file. I did not save the file, I only exported it and than exited the program. My active file is vannished. I need to make some adjustments to the ebook, but can not br
-
Error Message when installing Logic Pro 9
Just tried loading Logic Pro 9 on my new Mac and it gives the following error message: 'You can't use this version of the application Logic Pro with this version on Mac OS X. You have Logic Pro 9.1.1' What should I do?
-
How to remove security from pdf created in Acrobat pro 10 to allow addition of watermark?
Hi All, I am a newbie to the forum. I have a dynamic form created in acrobat pro 10. Each time I open the form to add watermark on it, i have a message that says " You don't have sufficient permissions to perform this tasks" and as a result the water
-
Hi everybody, I am in France. I have juste installed Lion. I have to regularly send php files on to a website on a Linux Gentoo under Apache webserver. Up until now I used Smultron (a text and code editor) and saved the files in Mac Os Roman Charact
-
I have a mighty mouse along with the apple keyboard, the keyboard itself works fine but the mouse ... It doesn't listen to any of my comands. It opens applications I haven't even asked, it's really hard to control and by the time you know it, the mou