Bonjour does not show printer available for installation

I can print via Airport-Express when I'm using an HP Desk Jet 948c. If I connect the HP Office Jet G95 (purchased 2001) to the Airport-Express Bonjour does not show the printer as available for installation, but I can print with printer connected to the USB port of the notebook.

These may help.
Printing from a Windows XP PC to a printer attached to an Airport Extreme Base Station or Airport Express
http://tech.ifelix.net/1004.html
Printing from a Windows XP PC to a printer attached to an Airport Extreme Base Station or Airport Express using Bonjour
http://tech.ifelix.net/1008.html
Problems with finding Printer Driver on Windows XP when using printer connected to Airport Extreme or Express
http://tech.ifelix.net/1012.html
iFelix

Similar Messages

Itunes does not show apps available for download

I have the following issue. I recently moved back to the US and changed my store account from Europe to US. Now, I get all app downloads on my iPad and iPhone correctly. However, my iMac states all the time that I have 5, 10, 19 apps available for download, When I click the button, I see perhaps 0 or 1-2 apps apps available for download. Apps available for download symbol stays on apps section in iTunes. If I sync my devices manually with the iTunes, the number goes down. Sometimes even to zero. However, my iTunes on my iMac seems to be unable to download those apps.

You need to purchase the iOS upgrade.
(58958)

CSCuo61115 - Sub CUCM does not show as available for new CUCM Group

Hi All,
I have just done a new installation of CUCM and upgraded to the latest release - System version: 10.5.1.11901-1 and have run into the above bug.
The bug is currently restricted so there isn't any documented work around - https://tools.cisco.com/bugsearch/bug/CSCun61115
I have managed to create the Call Manager Groups using BAT - I exported the existing CMG configuration (just the default group), modified the .csv to contain the CMG's i require and them imported this.
If you remove a server from the CMG then it doesn't show the server in the available list, you will need to reimport if you need to make any changes etc...
Hope this helps,
Richard

rchaser4 wrote:
...So, when I get home from the office, i'll drag Numbers over from the Mini to the Air and authenticate with my iTunes account (hopefully).
RC,
I'm not too comfortable with the advice you received. Sorry it didn't go better.
Let's go back to the beginning...
Did you make all your purchases of iWork apps via the Mac App Store application on your Mac?
If so, the purchased apps should be showing under the Purchased tab when you are logged into your Mac App Store account. This is not the same as your iTunes account. Do not confuse the two.
If you are sure you did purchase an app that isn't listed, it's possible that you have "Hidden" it. To hide a purchased app you would have clicked on the circle-x to the left of the app status. This symbol appears when you scroll over the line containing the app in the list of purchased apps. If that happened, there's a way to unhide it, but it's not simple.
To Unhide a Mac app in your MAS list of purchases, see this KB article: http://support.apple.com/kb/HT4928
Briefly, you will...
Launch the Mac App Store app
Store > View My Account
enter login pw when prompted
Click Manage in a window like this:
Then look for something like this:
Click Unhide and Done
That should do it.
Remember that your Apple ID is universal across your computers that are using this software. You must be using the same Apple ID on all the computers on which you want to share your purchases.
Jerry

After upgrading to iOS 8, the weather app does not show up results for any of the Indian States/cities

After upgrading to iOS 8 on my iPhone 5, the weather app does not show up results for any of the Indian States/cities. Can Apple look into this or does anyone have a solution to this.

Swipe from bottom of days listed ("Wednesday, Thursday, Friday, etc") upwards. I thought it was gone too but it's still there~just takes different way to access it.

Onlive TV listing does not show HD listing for series when I try to create a recording

It happened now already several times the the "Online TV Listing" does not show HD listing for series when I try to create a recording. Instead, it will show two series options in SD. Is this to make people use less bandwidth?
Here is what I am doing:
I go to this link https://www.verizon.com/fiostv/myservices/members/fiostv.aspx
Then to ...........DVR Manger
select ...........Record A Show
I type search e.g. Nathan for You
I click on ........Search
and I select ......Click here to Show Details
Then I get to chose from 2 (the same) SD channels.
Nathan for You
190 Comedy Central
Tue, Jul 29 10:30 PM
Record Show Record Series
Nathan for You
190 Comedy Central
Tue, Aug 05 10:30 PM
Record Show Record Series
But there is the same on channel 690 HD!
This happens not only to this particular channel!
I remember it used to show also the HD channels.
The only way to schedule in HD is to find the listing in the TV schedule, at the right time and there you will get the
correct choices for both SD & HD.
Can this be fixed?
Thanks!

On the right click on HD under video quality to filter it.

HP does not show any drivers for my P1006 under windows 10

My Laserjet P1006 will not work now that I am using windows 10. HP does not show that they have new drivers for my P1006. Will HP be coming out with new drivers.

Hi,Drivers should beocme available for Windows 10, as you may find listed below:http://support.hp.com/us-en/document/c04658195 In the meantime connect the printer and try following the HP Printer Install Wizard, it may detect a compatible driver for yoru printer:http://h20180.www2.hp.com/apps/Nav?h_pagetype=s-926&h_lang=en&h_client=s-h-e016-1&h_keyword=dg-PIW If that fails you may also try installing the Windows 8.1 drivers, there are good chances those will work on Windows 10:http://ftp.hp.com/pub/softlib/software12/COL21058/bi-55362-7/ljP1000_P1500-HB-pnp-win64-en.exe Regards,Shlomi

Ibook g3 hard drive does not show up after new installation

I have an older ibook g3. I purchased a 20gb hard drive to replace the dead 10gb hard drive that came with the computer when I bought it new. The installation was fairly easy. After the hard drive was installed and everything was put back together I turned on the computer and loaded the install disk into the cd tray. The new hard drive does not show up in order to install the operating system. What do I need to do in order to get the hard drive to show up?
Scott

Hey Scott,
The new hard drive does not show up in order to install the operating system. What do I need to do in order to get the hard drive to show up?
When you're in the installer go up to the top menu bar under utilities? or tools? and start up disk utilities. See if you see the hard drive there. If so it might not be formatted correctly so erase it and format it for your install (usually Mac OS Extended (Journaled). That should make it show up.
Richard

Device summary pane does not show capacitiy totals for each category (audio, remaining, photos, etc.)

When viewing the summary pane for my ipod, the summary bar does not show totals for each category (audio, remaining, photos, etc.). It does not show when hovering over each category either. Seems to be some type of bug with itunes. I have tried re-installing itunes but that does not work. How do I fix this?

Hello vetsrini.
Thanks a lot for your kind reply. As i said, i'm new to this and sometimes i just cannot pass over some problems. Here are the fields i have inserted:
<?for-each:LIST_G_SETUP/AS_OF_DATE?>
<?end for-each?>
<?for-each@section:G_CUST_INV?>
<?for-each:G_1?>
<?INVNUM?>
<?INVOICE_TYPE_INV?>
<?DUE_DATE_INV?>
<?sum (C_INV_BALANCE)?>
<?sum (C_INV_B0)?>
<?sum (C_INV_B1)?>
<?sum (C_INV_B2)?>
<?sum (C_INV_B3)?>
<?sum (C_INV_B4)?>
<?sum (C_INV_B5)?>
<?end-for-each-group?>
<?TOTAL_INV_AMT_DSP?>
<?TOTAL_INV_B0_DSP?>
<?TOTAL_INV_B1_DSP?>
<?TOTAL_INV_B2_DSP?>
<?TOTAL_INV_B3_DSP?>
<?TOTAL_INV_B4_DSP?>
<?TOTAL_INV_B4_DSP?>
<?end for-each:G_CUST_INV?>
In the header of the template i also have <?CUST_NAME_INV?> and the report date. When i try to enter the <?AS_OF_DATE?> it is not printed and also the header is not shown any longer. Once again, thank you for any help,
Octavio

:: NWA does not show table view for monitoring reports ::

Hi,
We are facing an issue in one of our portal system.
I click on Portal index page, then I go to Net weaver Administrator --> Monitoring --> Java system reports.
Here I get the resource utilization graphs.
The graphs show proper values however when I click on table view it does not show any value or table at all.
Then I click on Settings button, and click on Persistent radio button.
It asks to enter the number of days for which the the data should be stored.
I gave it as 2 days and click on Apply button.
It shows a message saying "changes would be effective after restarting monitoring service".
However when I go there i.e. NWA --> Administration --> Applications
I get below services
cafruntimemonitoring~ear
com.sap.ip.bi.sdk.monitoring
tclmwebadminmonitoravail~wd
tclmwebadminmonitorcomplib~wd
tclmwebadminmonitorprovider_ear
tclmwebadminmonitorstate~wd
tclmwebadminoverviewmonitoring~wd
tcmonitoringsysteminfo
Would you kindly suggest which service from above list should be restarted ?
Thank you, Regards,
Girish Garje.

I think what is being asked is "How do I expose a database view as a schema table in Configuration Manager?"
This is accomplished by creating a database view within the WCC database schema (and with the WCC schema user as the view owner). The view then will appear as a table in the "table" tab in Configuration Manager.
One caveat in 11g is that the user created by RCU does not have any privileges to read/create views in its own schema. You may need to grant privileges to views for the WCC schema user before this will work.

Search Item drop-down does not show any data for Advanced Search.

Hi,
I have a requirement to add a new criteria to the existing Advanced Search region of 'My Employee Information' in Manager Self Service responsibility. I substituted the AdvancedSearchVO to include the new column. Using personalization i did the below steps to show the new column in the page,
1) Created a 'Message Styled Text' item under Table Layout region to display the result. I associated the View Instance (AdvancedSearchVO1) and View Attribute (AttrColumn).
2) In Advanced Search Panel created a new CriteriaRow and set the 'Search Allowed' property to True.
3) In Advanced Search Mappings i tried to create the new mapping but the Search Item drop-down does not show any of the CriteriaRow item. But Results Item shows the 'Message Styled Text' item created in step 1 above.
Any idea what i would be missing becasue of which 'Search Item' property does not show any data?
I am using OAF version 12.1.1.
Thanks, Suresh

Hi,
I faced the same situation but i still waiting for the solution.. this is my problem's thread..
Addition of LOV Search Filter using Personalization
But when i tried to create a new custom page with advanced table and created a new LOV column via personalization. i was able to create new search mapping.. but this is not happening in the seeded page case :(.
I m also looking for solution...if any one can provide some inputs on it , will be highly appreciated.
Thanks
Renu

Help- Elements 9 "Does not show Advanced dialog" for downloading

Hi, I'm fairly new to elements and have gone through my "Dummies Book" and yesterday received my Elements 9 book by Scott Kelby and Matt Kloskowski. My problem is when I'm attempting to download 5 new pictures from a card that still has 700 on it - The download organizer does NOT show the "Advanced Dialog button" on the bottom-left corner of the dialog box which as Kelby and Kloskowski indicate, would allow me to select only the 5 new pictures that I am attempting to download.
Can anyone assist? Do you have any recommendations? It is clearly described (even with pictures) in the Scott Kelby book; however, my screen does not list the advanced dialog button.
Thank you-Thank you-Thank you!

Bob, It just seems that using windows to import into a file and then
importing from Files and Folders is a workaround to not being able to bring
up the Advanced Dialog Button. I do appreciate and thank you for this
suggestion!
Overall, I'm disappointed in the Photoshop Elements 9 program. It appears
from reading this forum, that there are many similar difficulties with the
Advanced Dialog Button and other similar programming elements that have
perpetuated from Elements 8.
Again, thank you for your time and interest and support in this forum.
Without contributors like yourself, many "newbies" would be forever lost.
One last question, Since I've downloaded by original batch of 700 photos
three times now, what would be the easiest way of cleaning up my mess??????
Thank you. Hoping to be able to use this program by Christmas!!!!!

How do I determine the size of an event (cmd I does not show any size for events).

How do I determine the size of an Event in iPhoto? (Cmd + I does not show size information at the event level).

If you're running iPhoto 8 (09) select the event and look at the Info pane at the lower left hand corner of the window. It will give you the number of photos and size:
for iPhoto 9 (11) open the Event, select all of the photos in it and open the Info drawer at the right by typing Command+i. The number of photos and size will be at the top of the Info drawer.
OT

Crystal Report does not show the webelement for SAP System

Hi all,
I have added web element in Crystal report for SAP system (BI or R/3) . But it does not show the control. It shows only scipt.It does not render the HTML.
But if I add the webelement for Excel sheet ,It shows the control.
How can I add web element for SAP System? Can't we use web controls in SAP system ?
Help me in this regard.
Regards
Hemalatha J

Hi,
We have the same problem, did you find the final solution?
Thanks in advance
Regards.

Router 7606 does not show the inventory for the Fan module

I have a issue with a router 7606, specifically with fan module, the LC go down because it does have sufficiently cooling , I changed the Fan module, the IOS, The power supply, and I still have the same issue, Besides the Router does not show the inventory or PID for module fan,
logg" system minor alarm on operating fan count"
Someone knows what could be happening,

Check this:
Can you try this;
7606-01#show environment status fan-tray 1
fan-tray 1:
fan-tray 1 type: FAN-MOD-6SHS
fan-tray 1 mode: Auto
fan-tray 1 fan-fail: OK
7606-01#show power
Fan Type Watts A @42V State
1 FAN-MOD-6SHS 180.18 4.29 OK............................ FAn try
If above doesnt work then try the below link:
https://supportforums.cisco.com/discussion/10824271/7606-s-and-fan-module-6shs-version-1
HTH
inayath
*Plz dont forget to rate if this info is helpfull.

Aperture does not show tick box for shared photo stream as promised on the help screen

I try to configure Aperture for iCloud shared Photo Stream. According to the help screen, I should select Preferences and see a panel with 4 tickboxes. The first three relate to My Photostream and work fine on all my devices. The crucial fourth tick box for sharing with others however does not show however. What else should I set-up to see the 4th tick box ?

You need:
'A Mac with OS X v10.8.2 or later and iPhoto 9.4 or later or Aperture 3.4 or later'
http://help.apple.com/icloud/#mmbc402b84

Bonjour does not show printer available for installation

Similar Messages

Maybe you are looking for