Bonjour for windows gives this error - You do not have sufficient access...

I installed Bonjour for windows on a PC running XP. When I run the Bonjour app from windows I can see the printer I wish to connect to. It is shared off of my G3 server. When I try to connect I get the following error,
"You do not have sufficient access to your computer to connect to the selected printer"
I have done some research through Apple's info database and found,
http://docs.info.apple.com/article.html?artnum=302408
I followed the instructions and still I get the same error. I have rebooted the PC deleted all the printers under the printer window. But no luck. I found a similar request by another apple forum user. His issue was the same but he was using 'Parallels' emulator. But no solution was provided.
Any suggestions?

Well this is what I've done to date to try to resolve this issue.
I uninstalled Bonjour for Windows from my PC. I checked Apples support pages dealing with Bonjour for Windows (BfW). As suggested I deleted all printers in my printer window, (to delete all possible print Queues). I updated my Windows to the latest patch for XP. I reinstalled BfW, with the XP Firewall turned on. It is suggested that BfW will make the necessary changes to the XP firewall to allow traffic going through port 5353. I have tried more than one printer off of my G3 and I double checked my external router port restrictions, and I turned off the firewall on my G3, shared mt printers in OS X, and even turned on windows file sharing. I even updated my G3 to 10.4.8
I pinged my G3 from my XP machine it's there. Also I can see the G3 with it's printers when I browse the network from the XP box. Also I'm on the same local subnet 192.168.2.x
The only thing I have not done yet is see if it is possible to ping a bonjour host (my G3) from a bonjour client (XP box). That would at least verifiy the 5353ports.
Anyone have a bonjour utility to do that? Probably have to run in a Windows enviroment. Or can a ping packet be directed to use a particular port?

Similar Messages

Windows Vista Bonjour error "You do not have sufficient access..."

My Windows Vista laptop recognizes my HP PSC 1310 printer connected as a USB printer with Airport Extreme. It even has the correct driver. When i go to finish set up i get an error "You do not have sufficient access to your computer to connect to the selected printer". I am doing this as an admin on my PC. The printer works correctly on my Macbook. The guidance given by apple is no help at all. Any ideas?

I experienced the same general problem and did find a manual workaround in my particular instance. Hopefully this is helpful to anyone who's facing the same situation.
MY SETUP: installing a hp LaserJet 1012 that's tethered to a wireless Time Capsule (home network) on a virtual VISTA platform running within Parallels 4.0.3810 on an iMac OS 10.5.6.
THE PROBLEM: WinXP (also virtual) connected to the printer through BONJOUR FOR WINDOWS without any problems. However, doing the same in Vista resulted in a last step termination of installation with the following message from Vista: "You do not have sufficient access to your computer to connect to the selected printer." Lovely.
Turns out, according to Microsoft (link: support.microsoft.com/kb/946394/en-us Help and Support Article ID: 946394 - Last Review: January 24, 2008), the problems is due to "the Hewlett-Packard (HP) print driver uses an HPBmini.dll file ("HP Mini Installer") whose version is earlier than 1.0.0.13."
My workaround was to simply install the network printer manually via ~ (the following are the choices that I clicked on in VISTA)
Vista Control Panel > Hardware and Sound > Printers > Add a printer >
Add a network, wireless or Bluetooth printer >
The printer that I want isn't listed >
Add a printer using a TCP/IP address or hostname >
CHOOSE - Device type: Autodetect
INPUT - Hostname or IP address: "Time-Capsule"
(which is the specific hostname in my case, the hostname can be found by going to OS X System Preference > Print & Fax > click & highlight the printer installed on the local network in OS X and look for the hostname after "Location:". Remember, Windows do not do spaces, so if there are any spaces in your hostname be sure to substitute a dash "-".
SELECT - "Query the printer and automatically select the driver to use" >
Device Type > Standard | Generic Network Card > Install the printer driver* >
(*Here's the tricky step, since you don't want to use an old driver which would bring up that old insufficient access message, but you do have some options:
a) you have a known VISTA COMPATIBLE driver from the manufacturer (net downld);
b) the "Add Printer Wizard" window may contain a driver for your specific printer or a similar printer. Also, try the "Windows Update" button to refresh the choices if you can't find it the first time; and finally,
c)"Generic" is a legitimate choice in the Manufacturer window if you can't find any better options.)
From there, it's just Next > Next > and choose to share printer, etc. to finish up.
Luckily, I got through to "Print a test page" and it all works without the annoying "insufficient access" message.
Best of luck to you.

Essbase error:You do not have sufficient access to perform a lock on this..

Hi all,
I tried to retrieve the members in the spreadsheet addin client and I am getting the error as follows:
Essbase error: You do not have sufficient access to perform a lock on this database.
But Iam trying to do only a retrieve operation. Essbase version is 9.3.0.1.02 and OS is windows XP.
Also under Essbase->options->Mode tab, the check box update mode was unchecked.
I was able to do the operation before without any error and suddenly Iam facing this issue.
Can anyone help me on the above
Thanks in advance,
Raja

Hi Raja,
Check this out../
Weird problem regarding Essbase Excel plug in
It might help
Regards
Amarnath

Error: You do not have sufficient access to perform a lock on this database

Hi,
Can anyone help on this.
When user try to load data through Excel it throws the following error "You do not have sufficient access to perform a lock on this database"
We are using Essbase 6.5.
We have tried following options
FIX1:
In Microsoft Excel, under ESSBASE -> OPTIONS, under the MODE tab, the check box UPDATE MODE is checked.
When the UPDATE MODE check box is selected retrievals will automatically lock the corresponding database area with each retrieval. Disable Update Mode to stop locking blocks automatically. In update mode, the Send command (which updates the server with data values from the spreadsheet) does not automatically unlock data after the send.
1. Launch Microsoft Excel
2. Select ESSBASE -> OPTIONS
3. Select the MODE tab
4. Uncheck "Update Mode" to return to normal mode
This error is seen when trying to lock and send data via the Hyperion Essbase Spreadsheet Add-in into that fall within a replicated target partition definition
1. Go to HYPERION APPLICATION MANAGER -> DATABASE -> PARTITIONMANAGER
2. Select the relevant partition
3. Select EDIT
4. On the CONNECT TAB, select SETTINGS and tick the option THETARGET PARTITION CAN BE UPDATED
Also gave write access to that user.
Can anyone give another possible solutions.
With thanks,
babu

Hi Raja,
Check this out../
Weird problem regarding Essbase Excel plug in
It might help
Regards
Amarnath

Essbase add-in error:You do not have sufficient access to perform a lock

Hi,
I have a user who is doing a retrieve in Excel and is getting this error on v.9.3.1:
Essbase Error: "You do not have sufficient access to perform a lock and send on this database".
The user is just doing a retrieve, no lock and send.
I asked him to disable 'update mode' in add-in options (Mode tab) on each of his sheets.
But when he open a new sheet/document Excel 2007, the 'update mode' is enabled by default.
Where can we change that ? Is there a command to put in a .ini file?
I check all the threads but there no answer on how to change this default setting.
Thanks for your help,
Marie.

Hi Raja,
Check this out../
Weird problem regarding Essbase Excel plug in
It might help
Regards
Amarnath

Error: "You do not have sufficient access privileges"

I consistently receive the error message "You do not have sufficient access privileges" when attempting to rename certain files or folders in OS 10.5.2. The output of
ls -le ./
is (edited for privacy):
total 12200
drwx------+ 7 myusername myusername 238 Apr 19 22:17 Desktop
0: group:everyone deny delete
drwx------+ 10 myusername myusername 340 Apr 6 01:04 Documents
0: group:everyone deny delete
drwx------+ 5 myusername myusername 170 Apr 19 22:35 Downloads
0: group:everyone deny delete
-rwxr-xr-x+ 1 myusername myusername 99312 Sep 3 2007 Image-57E66CC6A02011D9.jpg
0: group:everyone deny delete
drwx------+ 55 myusername myusername 1870 Apr 19 23:02 Library
0: group:everyone deny delete
drwx------+ 10 myusername myusername 340 Apr 5 17:26 Movies
0: group:everyone deny delete
drwx------+ 211 myusername myusername 7174 Apr 19 19:01 Music
0: group:everyone deny delete
drwx------+ 725 myusername myusername 24650 Apr 14 19:14 Pictures
0: group:everyone deny delete
drwxr-xr-x+ 5 myusername myusername 170 Dec 24 22:38 Public
0: group:everyone deny delete
drwxr-xr-x+ 4 myusername myusername 136 Dec 24 23:53 Sites
0: group:everyone deny delete
drwxrwxrwx+ 4 myusername myusername 136 Dec 24 23:45 Templates
0: group:everyone deny delete
drwx------+ 20 myusername myusername 680 Dec 24 23:03 Travel
0: group:everyone deny delete
drwx------+ 6 myusername myusername 204 Dec 24 23:25 Writing
0: group:everyone deny delete
lrwxr-xr-x 1 myusername myusername 44 Dec 31 13:15 webroot computer1 -> /Volumes/computer1/Library/WebServer/Documents
lrwxr-xr-x 1 myusername myusername 28 Dec 31 13:15 webroot computer2 -> /Library/WebServer/Documents
Attempting to rename, for example, Image-57E66CC6A02011D9.jpg at the root of my home folder produces the error message "You do not have sufficient access privileges".
I tried repairing permissions with Disk Utility -- it completed successfully, but the problem remains.
I tried restarting with the Leopard Install DVD and doing the Reset Password > reset ACLs thing for all user accounts on the computer but the problem remains.
When I execute
sudo chmod -R +a "everyone deny delete" ~/
chmod responds with "Operation not permitted" on hundreds of files. For example:
chmod: Failed to set ACL on file 'Application Data': Operation not permitted
When I next execute
sudo chmod -R -a "everyone deny delete" ~/
chmod responds with
chmod: No ACL present
When I execute
sudo chown -R `id -u`:`id -g` /Users/`id -un`
chown responds with "Operation not permitted" on hundreds of files. For example:
chown: /Users/myusername/Music/b/Beck/1993 Loser (CD Single)/05 - Fume - Beck - 1993 Loser (CD Single).mp3: Operation not permitted
iMac is new in December 2007 and I used Migration Assistant to migrate files from a Mac Mini running 10.4. The iMac with the permissions problem also received files from an NTFS filesystem (Windows XP SP2).
Any suggestions? Thanks!
Message was edited by: user9287432

Thanks, Scott. I executed
sudo chflags -R nouchg ~/
and
sudo chown -R myusername:staff ~/
(replacing myusername with my user name)
and in each case there was a delay of a number of seconds and then the command prompt returned -- no errors. However, my renaming problem still exists.
Just fyi, I got
sudo chown -R `id -u`:`id -g` /Users/`id -un`
from the thread at
http://discussions.apple.com/thread.jspa?messageID=6963994
or
http://tinyurl.com/56xrz8
The list of commands in petrock's post of Feb 1, 2008 12:11 AM ("Re: if you have problems with ACL") did not work for me. I think they made things worse because now I'm being prompted to enter my password when doing simple things like deleting files when before it hadn't. I think this is because the list of commands did not all complete successfully -- it's not clear what to do if you encounter "operation not permitted" or "no ACL present".
And, I don't know if this is relevant, but before this I resolved some permissions problems in this thread:
http://discussions.apple.com/message.jspa?messageID=6634641#6634641
or
http://tinyurl.com/57vls4
Does it appear that Hal Itosis' homeACLtool script at
http://www.macfixitforums.com/showflat.php?Cat=&Board=Forum38&Number=849901
or
http://tinyurl.com/5daza8
might help me, or should I try something else?

Bonjour printer "You do not have sufficient access to...

Bonjour for Windows: Printer wizard says "you do not have sufficient access"
If you get this problem go into your Airport utility and change your printer name to something shorter than "40 Character." (Errrr PC!)
Then go back into your Bonjour and finish installing your printer.

This is happening with me. I have Airport extreme WiFi router with a USP printer attached. Mac prints just fine but while installing it on a Win7X64 computer it throws the permission error.

You do not have sufficient access

I had a USB printer connected to my Airport extreme and was able to print to it using Bonjour from my XP machine. However, because of it's unreliability, I re-connected it to my G5 iMac and used printer sharing for the other Macs which worked much better. However, when I tried to connect from my XP machine, the printer is found but I get the following error: Error: You do not have sufficient access to your computer to connect to the selected printer. I have followed the Apple KB and re-installed Bonjour and deleted print queues etc., but it still doesn't work. Apple say that the latest version 1.03 fixes the problem. I have downloaded this and installed. However, the version number given in the XP control panel gives version 1.0.102!
Has anyone got any ideas please?
Thanks
Phil
iMac G5 Mac OS X (10.4.6) 3 other Macs

I'm behind a corporate firewall through a VPN. However, even when the VPN is disconnected and I am going through the Airport, I can't print. When the printer was connected to the Airport directly, it printed OK. However, printing wasn't reliable from the ibook and other macs when connected this way.
Thanks
Phil

You do not have sufficient access rights, pls help

Hi folks,
I'm getting the "You do not have sufficient access rights" error accessing the Identity System Console. The same admin account can access User/Group/Org Manager screen, however, for some reasons user and group searches return no results. This is the second OIS install against the same ldap dir (ovd to sun 6.3), so I had to specify Id server was not the first one to avoid profile conflict with oblix DBAgents. The admin user had been selected during prev install, and exists under o=Oblix in both cn=Web Masters and cn=Directory Administrators.
I have LDAPMaxNoOfRetries set to the number of dir servers +1 in all globalparams.xml on OIS. I also can modify ldap dir via both ldapmodify and ldap browser binding to OVD as same user. Turning the TRACE on didn't showed any errors except for the following:
DB_RUNTIME WARNING 0x00000504 ldap_config_db.cpp:187 "Exception during DB runtime code" function^LDAPConfigDB::Open() status^17
DB_RUNTIME WARNING 0x00000504 ldap_config_db.cpp:355 "Exception during DB runtime code" function^LDAPConfigDB::ReadOblixDBConfig()status^17
SCHEDULER_FRAMEWORK ERROR 0x00000501 ../obschedulerthread.cpp:316 "ObError exception caught" ObScheduledTaskLiaison::LoadTasks^ObWFScheduledTaskLiaison
PPP INFO 0x000008C7 obeventcatalog.cpp:183
Cannot find the action
function^ObEventCatalog::GetActionEntry2Modify()
actionName^front_page_admin_klogin_post
APP_BASE WARNING 0x00000833 oblixbasecommon2.cpp:1235
Login failed
Error^You do not have sufficient access rights
numLoginFailures^1
There's nothing in the ldap logs either. The only warning I get per that user is in the ovd log:
DoSManager: Found unbound connection from active ip addresses
DoSManager: Found unbound connection from active users
The Oracle Support is clueless, please help.
Thank you, Roman

Hi Vinod,
Thanks for the post. OK, if I got it right, I have two entries under obcontainerId=DBAgents for each of my primary Id servers. For the one I currently use, I have this towards the bottom:
obname=oblixConfig-OIS_mdi-oamlx-3
obname=default-OIS_mdi-oamlx-3
Both entries have obdbusedby set to OIS_mdi-oamlx-3 which is my OIS id. The obsearchbasestr is different: o=Oblix,o=paychex inc for the oblixConfig, and o=paychex inc,c=us for the default one. Is that's the way it should be?
Thanks Roman
P.S: I've noticed I get same error accessing My profile under User Manager.

While trying to access i phone through pc (windows 7 ) showing error 'you do not have permission to access this device '

while trying to access i phone through pc (windows 7 ) showing error 'you do not have permission to access this device '
And while trying to unlock screen after lock , slide not working 'slide to unlock'

Hello there, charialji.
The following Knowledge Base article offers some great steps for troubleshooting your issue:
iOS: Not responding or does not turn on
http://support.apple.com/kb/ts3281
Resolution
If a single application is not responding or stops responding when it opens, you can force it to close.
If the device is unresponsive or if certain controls aren't working as expected, restart your device.
If the device remains unresponsive or does not turn on (or power on), reset your device.
If there is no video or if the screen remains black, verify that the device has enough charge to turn on:
If you are using an iPad, ensure that it's connected to the USB Power Adapter supplied with the device.
Let it charge for at least twenty minutes, then see if it starts normally.
If there is no image on the screen, press the Sleep/Wake button to attempt to wake the device.
If the screen displays a red battery icon, continue charging the device until the battery is fully charged. Learn more about charging iPhone and iPod touch, or iPad.
If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
Connect the device to your computer and open iTunes.
If the device appears in iTunes, select and click Restore on the Summary pane. Learn more aboutrestoring iOS software.
If the device doesn't appear in iTunes, try to force the device into recovery mode, and then restore it.
If the above steps do not resolve the issue, contact Apple.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

On windows 7 I receive this error while installing error: "You do not have sufficient privileges to

error: "You do not have sufficient privileges to perform the requested action."
The resolution on the other thread did not work for me. What could be wrong? I have installed Adobe Flash Media Live before without an issue but after I reformatted my PC I keep receiving this. Thanks in advance.

I've solved it,
Change the permissions on the file (sudo chmod 755 httpd.conf)
then
sudo nano httpd.conf
and it works fine
thanks alot for your help

I purchased two songs on i-tune and when I attempt to down load them, I get an error,"you do not have enough access privilege for this operation.?????

I purchased two songs on i-tune and when I attempt to down load them, I get an error,"you do not have enough access privilege for this operation.?????

To fix Home folder permissions
Open the Terminal application in the Utilities folder. At the command line prompt enter or paste the following command line:
sudo chown -R `id -un`:`id -gn` ~
Press RETURN. You will be prompted to enter your admin password which will not be echoed.

I have created a slide show with pictures and music in Iphoto and when I try export it I get Error You do not have sufficient permission for this operation.

I have created a slide show with pictures and music in Iphoto and when I try export it I get Error You do not have sufficient permission for this operation. Try to export to an external HD attached, all help would be gratefully received

Have you ever successfully saved anything to that external drive? My first two thoughts are that the drive isn't formatted for the Mac or that you don't have rights to save to the drive.

Error: "You do not have suffficient access to perform a lock on this database

Hi, I have a problem with Essbase Excel Add-in, i can´t retrieve because appears this error: Error: "You do not have suffficient access to perform a lock on this database Plese, help me. Idon´t have speak inglish.

If the problem is limited to a single PC, I would suggest that you uninstall the Essbase client on that PC, reboot, and the reinstall the client including the addin. It appears that some sort of macro is running on that PC that does teh login in update mode. I'd also remove all copies of any excel spreadsheets that might be involved, copying a clean version from another PC. If you are using any third-party tools, like toolbars or other addins for excel and essbase, I'd clean them out also. You haven't said whether a login from an new, blank spreadsheet works. If it does, the problem is in the spreadsheet you are using to retrieve the application, otherwise, the problem may be in a corrupted add-in, or even possibly with your excell installation. It's hard to diagnose a problem when you haven't given us any more information about the problem. You haven't really answered any of the questions we've asked about behaviour and whether the problem existsin certain other circumstances. I'm certain that if language is a problem, someone might be able to help you in some language other than English, but generally this forum works in English because it a a common language in the Hyperion community.

How do I solve the issue of this message "you do not have enough access privileges for this operation" on my iTunes?

How do I solve the issue of this message "you do not have enough access privileges for this operation" on my iTunes? I already went to the folder of iTunes inside the Finder and change all permissions to allow read and write... no improvement at all. Any help? thanks!

Hi! I just realized I have two folders called library, one is inside HD alongside with System and users, then I have also "library" inside users, some of the folders are apparently repeated, some are missing. And all the music is inside a folder called iTunes Music, inside Music, inside users. Now that I relaized some folders are repeated I applied to all related to iTumes r/w permission. But the annoying message keeps coming on.
And yes, I am using Leopard, 10.5.8.
Any ideas?

Bonjour for windows gives this error - You do not have sufficient access...

Similar Messages

Maybe you are looking for