Bonus Depreciation for the year 2010

Hello Gurus,
I need to configure for the bonus depreciation based on the newly enacted US law 2010. The requirement is, for the asset purchased between 3rd Jan 2010 through 07th Sept 2010, the bonus depreciation need to be calculated @50% as special depreciation. The balance need to be depreciated as ordinary depreciation for 2010 and the remaining periods. For the assets purchased between the period 08th Sept to 31st dec 2010, the bonus depreciation need to be100%.
Please let me know the step by step configuration that need to be done for:
1. Depreciation key M20S.
2. The base method to be maintained
3. The multilevel method
4. The period control method for depreciating the values for the above mentioned dates
5. The bonus depreciation need to be calculated only for 2010 and should not be calculated for 2011 and onwards.
Also please let me know if there is any SAP note for 2010 Bonus depreciation calculation
Thanks in advance.
Best Regards,
Sri

Hi Sri,
please check the OSS notes 1316999 and 1148489 in relation to your issue.
Please make sure the config is as per the note.
Maybe the following links are useful:
http://help.sap.com/erp2005_ehp_05/helpdata/EN/ec/bb6055ddbf4db2bc8ae129f0faab61/frameset.htm
http://help.sap.com/erp2005_ehp_05/helpdata/EN/95/24f5e1b4f743658d7f3cbffe708904/frameset.htm
http://help.sap.com/erp2005_ehp_05/helpdata/EN/ba/66a5ec7bbf4060a8eb0eee29e6b565/frameset.htm
http://help.sap.com/erp2005_ehp_05/helpdata/EN/8a/f5bbe8692943328f7cb6ee4b3cf344/frameset.htm
regards Bernhard

Similar Messages

Update Manually planned ordinary depreciation for the year - TC - ABCO

Hello Asset's Gurus.
I need to update a Manually planned ordinary depreciation for the year (ANLC-NAFAM).
I'm looking for a BAPI that will do this update.
I'm using Batch-Input right now with transaction code - ABCO , and I'm having a lot of problems such as updating only some of the selected assets - (no memory problem - no DUMP) while others remaining unchanged.
Please help me find a BAPI that can do this job.
The system is ECC6.
Thanks ahead.
Eyal.

I have used Batch Input...

Depreciation for the year to be posted halfly

Hi Guys
In my implementation we have a scenrio, the depreciation for a particular depreciation area has to be done halfly i.e. only on period 06 & 12
I have done necessary configure for the weightage and for the relevant depreciation area
OAYL - i have clicked the check box for the relveant depreciation area
OA85 - i have given the weightage for the period 06 & 12 as 50% and for all the other period as 0
But when i run the depreciation AFAB - the deprecation is getting posted from the very first period
Did i missed any config guys
Thanks in advance
Warm Regards
Bala

Hi Bala,
When I look to your example you can use a nomal depreciation key like LINR. In the asset you have to say start at the middle of a year. Like on 01-07-XXXX.
In the period control from your depreciation key you can use start at the middle of the year. When the fiscal year is not the same as the calendar year you have to define that in the period controls.
When you create a posting then the depreciation keys looks to the period controle table and fill in automtatecly depreciation start date.
When this is in all the years you have to say
years month
0          6         0%
1                     50%
1          6         0%
2                     50%
It is then important that the depreciation start date is the first day of the fiscal year.
For tessting this you can better use the esset exploirer. There you can see the planed values by month for this year and the years tottals for the other year.
Paul

Bonus Depreciation for subsequent acquisitions in 2010

Hi all,
We have done bonus depreciation for 2010 and 2011 aand its working fine but for one scenario.
Assets acquired in 2009, had bonus depreciation calculated for 2009. But when there is subsequent acquisition in 2010, its not calculating bonus depreciation for the 2010 acquisitions. We are not using any sub asset concept but are adding to the original asset.
Please let me know how to ptoceed ahead.
Thanks a lot in advance,
Sajan

Hello Jay-R
I have the same question the multi level method maintained as below
My requirement is I need 50% reduction on the asset addition therefore for the year 2015 it should be 500 in reduction since there is 1000 addition to the asset. Please provide me your input on how I can achieve this.

Depreciation for the Financial Year 2007-08

Dear All,
How to run the Depreciation for the Financial Year 2007-08, without disturbing the Depreciation of Financial Year 2006-07.
kindlly send me details desprications
Regards
Pritpal

Posting Depreciation is a periodic activity. Depreciation is posted every priod by AFAB by aseet accountants. However it is not necessory that you need to run AFAB when you are in the current period. You can run it any time; subjected your financial accounting is open for that period. In your case you need to run AFAB for every priod from 2006 to 2007. After each year is completed, you may need to run ASKBN for APC periodic posting and cose that FY in Asset account by AJAB open new FY by AJRW (Eg. 2008).

Input ready based on the year 2010-11

HI ,
In my input ready query, the user has to enter the fiscal year and fiscal year/period for entering the data in the respective months. I select the fiscal year as 2010 means, it has to allow the fiscal year/ periods from Apr 2010 to Mar - 2011. But in my case it is not showing Jan-11, Feb-11, Mar-11, when I select the fiscal year as 2010. Fiscal year varient is V3 from Apr - Mar.
In the same case if I enter the year as 2010 - 2011(interval) at the runtime, it will show as input ready, but in the calculation of my formula function it is calculating for only 1 year. For the months Jan-11, Feb-11, Mar-11 it is showing zero. How can I write a planning Function to calculate depreciation.
Regards
Rajesh

HI,
Thanks for your replies..
@ Bindu,
I am not resticting 0FISCYEAR in the global filter as well as in the filter associated with planning function. If the user selects 2010, 2010 and 3 months of 2011 also displaying for input ready. But when I execute the planning function, it is execting for 1 year only. it is not calculated for the 3 months of 2011.
In this case, I wrote the condition that, if Posting period = 010 or 011 or 012 take the year as year+1. Eventhough it is not calculating "Depreciation".
@ Matthias,
The variables which I am using are 0FISCYEAR (Interval), 0FISCPER (Multiple Single Values) and the formula function is based on 0FISCYEAR and 0FISCPER3 to calculate "Depreciation".
Normally as per my idea, if we select the fiscal year 2010-2011, it is has to allow to enter the values for the months from Apr-10 to Mar-11. it is allowing to enter the values. But it is not calculating.. If I select the year 2010, then it is calculating "Depreciation" from Jan-10 to Dec-10, like Calendear year.
Please give me some inputs to calculate "depreciation"
Thanks and Regards
Rajesh

Getting error while Year end closing in asset accounting for the year ...

Hi,
i am getting error while doing Year end closing in asset accounting for the year 2004. It is giving few assets and saying that "Depreciation not posted completely"
Can any body help in this reagards.
With regards,

Dear Shree,
Do u have the list of all such assets for which no depreciation has been posted. If yes, then go to AFAB, upload the list all these assets & then select the radio button as 'repeat'.
This will post you depreciation for all the assets. then close the year.
regards,
Ajay

Asset Scrapping - Calculating Depreciation for entire year

Hi guys
We want to scrap an asset without revenue using ABAVN.
Asset Details:
The asset will be completely depreciated by the end of this year (December)
We have smoothing indicator on.
We wish to post the retirement and close out the asset balances in this month itself.
(No depreciation should be pending for the remaining periods of the year)
When we post the retirement transaction in test environment, it still shows the planned depreciation for the entire year.
How do we avoid the planned depreciation posting for future periods ?
Thanks!
Gautam

Perhaps, the following might be a solution that can be implemented safely in a production setup:
Objective: To post retirement related depreciation in a single period without smoothing over the remaining periods.
Solution:
Perform standard depreciation posting run for current period
Turn Smoothing Indicator Off
Write Off Asset
Run Repeat Depreciation Posting Run (select Repeat Posting Run instead of planned and also input the retired asset number)
Turn Smoothing Indicator back on
This should post the complete depreciation in the current period for the retired asset and smooth out the depreciation for all remaining assets

How to find compensation data for the year

Dear All,
Scenario:
A company wants to know the comepnsation data for financial year 2009-2010.
Problem: I couldnot find a single report which can provide the compensation of an employee for the year.
We are trying to build a report however needs input if anyone has done that:
Table which stores this data is PS_COMPENSATION.
Problem is : it stores data in effective date.
How to then convert it into a year -April 2010 to March 2011
For example: cases
a. existing employee: whose effective comp data will be less than April 2010
- Plus, there are pay rate changes between April 2010 to march 2011. (Pay rate change can happen on any date of the month)
- How can I add them to find the Compensation as per comp page from 1st April to 31st march 2011

I'm afraid what you're looking for is not likely to be a trivial task. If you have all of the modules required for the "Report Total Compensation" product, then you should take a look at the associated PeopleBook. I think you will have to be on HRMS 9.0 at a minimum, and using Payroll for North America and Benefits Administration.
To create a custom solution, you may have to consider a variety of other factors such job status--leave, terminated, terminated with pay, etc.--hourly vs. salaried, part time vs. full time, multi-job, variable compensation. It will depend entirely on the specific features that are being used at your site.
If you provide a very detailed example of the output you are looking for with sample data, someone might be willing to offer a solution.
Regards,
Bob

Fiscal year variant V3 is not maintained for calendar year 2010

Hello Gurus,
I tried to load the data from data source to Targer i got bellow Error Message and i checked the data in R/3 side 2010 data is available ,
Diagnosis
An error occurred in BI while processing the data. The error is documented in an error message.
System Response
A caller 01, 02 or equal to or greater than 20 contains an error message.
Further analysis:
The error message(s) was (were) sent by:
Second step in the update
Second step in the update
Second step in the update
Second step in the update
Procedure
Check the error message (pushbutton below the text).
Select the message in the message dialog box, and look at the long text for further information.
Follow the instructions in the message.
1) Fiscal year variant V3 is not maintained for calendar year 2010
2)Error when assigning SID: Action VAL_SID_CONVERT table 0FISCPER
3)Error when assigning SID: Action VAL_SID_CONVERT table 0FISCYEAR
4)Activation of M records from Data Store object 0FIAP_O03 terminated
5)Process 000052 returned with errors
6)Process 000119 returned with errors
Please suggest.
Thanks
Prakash

prakash,
i hope 2010 fiscal variants are not mainiatined in ur bi system
please do this operation..
Go to RSA1-> source systems->select R/3 system -> right click->Transfer global settings->Fiscal year varaints->rebuild tables
then try to repeat the load...the load will be fine if the calender is maintained in R/3 if not raise this issue to the functional people...

Fiscal year "A3" Variant is not maintained for Financila year 2010

Hello All,
while creating asset master using AS01 T Code i am getting an error "Fiscal year "A3" Variant is not maintained for Financila year 2010 for Compnay Code 0600".
but i have configured Fical year variant and assigned to co code, i am able to post the transactions for all the periods i.e financial year 2010.
here my question is whether we need to maintain the Fiscal year variant separately for Asset accounting in ECC 6.0.
Please Suggest
Thanks
Shankar

Hi Murali and Christian,
Thanks for your reply..
now i have configured year dependent fiscal year to my co code, if i configure calender year i am able to create the Asset master
please help
Thanks
Shankar

Customizing setting 'Recalculate depreciation for previous years'

Dear Experts,
I have requirement where for tax depreciation areas we want the system to recalculate the depreciation for previous years. For e.g.
Asset acquired on 7/1/06 with value 10000
Useful life: 5 years
Take over date in asset accounting: 9/30/2008
With the above example, I want the system to show me depreciaiton values for the years 2006 and 2007 also in transaction AW01N (Asset Explorer), apart from 2008.
In FI-AA customizing, I have enabled the relevant depreciation areas for recalculation in the node 'Recalculate Depreciation for Previous Years' (Transaction OAYF).
However, when I create the legacy asset and maintain the takeover values, the system just shows me depreciation for 2008 and onwards.
Is there something I am missing? Please advice. I have searched the SAP help and SAP notes, but did not find anything.
Regards,
Vishal.

This is not possible. When you takeover an asset using AS91, it is creating an ANLC entry for that year only. 2008 in your case. Regardless of when the asset was originally acquired, SAP will only let you report on it back to 2008.
This concept is no different than any other FI/CO legacy conversion. If the customer is going live on Jan 1st 2008 but they want to do monthly comparison reporting in SAP (Jan 07 and Jan 08), then they need to convert 2007 data. If they want 2006, they need to load that too. Etc.
For FI-AA, if the customer wants to view data back to 2006 you would have to change the takeover date to that year and adjust the data as well (accumulated depreciation).
-nathan

How to reverse the Depreciation for the excess amount posted?

Hi Gurus,
We have uploaded the data last month from legacy system to SAP as below.
The Fiscal year is Jan - Dec and gone live on June 28th 2009.
Accumulated Depreciation was taken till Dec 2008.
Ordinary Depreciation was taken from Jan 2009 to June 2009.
But Ordinary depreciation is not up to date in SAP as the user miss out the 2 months depreciation for each Asset but this was already posted in legacy system. All the GL Balances have been uploaded as per the legacy system. Now system is taking the previous 2 months Depreciation along with the current month. If we run the Depreciation for the current month, the system will post excess amount as it includes previous 2 months Depreciation.
Can any one kindly suggest the process to reverse the excess amount after Depreciation posted for the current month?
Thanks much for the help.
Early responses will be appreciated.
Best Regards,
JBC

HI
Few clarifications-
1. you have posted two months dep in legacy , have you transferred that dep amount wth the ordinary dep transferred from jan to june?
If yes, that means your last posted dep month is june and accordingly you have to set the last period (6) in the SPRO for asset data transfer specifications, so system will start calculating dep from the 7th period only and will not recalculate dep for last two months.Check the last posted period mentioned in SPRO.
2.If you have uploaded wrongly your ordinary dep for current year , then that means your Asset accounting opening balance (migrated balance ) is not matching with your Trial GL upload as well, so you need to correct your asset accounting opening balances.
For this you need to reset your company code status from 0 to blank ( tset data always allowed for asset data transfer). And then correct the values for current year ordinary dep posted from jan to june, also check the last posted dep period as above.
3.However you may post writeup ttype 700 to adjust the excess dep posted by any reason, you can extract last two months dep posted values asset wise from legacy system if already posted, and post the writeups for the same value in current period using LSMW.
Cheers
Mukta

Depreciation for the Dep Area 03 is positive for the month of december

Dear All,
My client has run the Deprecation for the month of Dec 2011 and for only one asset the value in the depreciation area 03 is become positive. Eg; for 11 months value is credit 1000 and in the month of December it has posted as Debit 1000. And the value of the asset has in the deprication 03 is same as 2011 value because dep. is zero.
Please assit me in this case as I its financial year close.
Regards,
Jayraj

Hi Jayraj,
I assume that the DEP KEY might have been changed for the Area 31 to 0000 after running the dep update run for NOV period but before running the DEC dep update run in AFAB/AFABN.
This could be the only reason, where the whole Dep for the year will get reversed.
Ex: You might have created an addtional DEPRECIATION INTERVAL for Dep area 31, where the starting date for the the same could have set to FY start date.
Regards,
Srinu

KP26 version 0 lock for fiscal year 2010

why i cannot update KP26 using version 0? but when i using version 1 its ok ?
now my fiscal year is 2010, and period 3.
the error shows - version 0 is block for fiscal year 2010. where i should check and change?

Hi,
check this link.
link:[Re: Activity type problem;
hope it'll give some idea.
Regards,
Sneha.

Bonus Depreciation for the year 2010

Similar Messages

Maybe you are looking for