Boot Camp and Windows 7 Problems

I have found a reproducible bug with Boot Camp and WIndows 7.
Clean install of OS X 10.6.2, Boot Camp Asst. Partition on my Mac Pro boot drive, clean install Win 7.
Problem: while in OS X, Disk Util Repair Permissions takes forever, churning away at the hard drive. Also, intermittent Spotlight hangs, and weird Dropbox behavior where it churns the disk like crazy again.
I have Paragon NTFS for Mac v 7.03 and perhaps this has something to do with it.
After retuning to a single partition using Boot Camp Asst. (deleting the Win 7 partition), all is back to normal - Repair Permissions takes about 60 seconds, no Spotlight or Dropbox issues whatsoever.
Using Fusion for Win 7 for now. Awaiting official Apple support of Win 7 in Boot Camp.
Wondering if anyone else can confirm this behavior where you have a partitioned boot drive with 10.6.2 and Win 7, with or without NTFS for Mac 7.03.

Addendum: on reboot/option key boot screen, it showed OS X volume, Win 7 Volume, and EFI Boot Volume - the latter had never been there before with Vista.

Similar Messages

  • Unable to install Boot Camp and Windows 8.1 on Mac Mini

    Hello,
    My computer is a late 2012 mac mini with fusion drive. OS is OSX 10.9.1. Also an apple external optical drive and a Windows 8.1 full install DVD. I attempted to install Boot Camp and Windows 8.1 and failed.
    I ran Boot Camp Assistant and first problem was when it rebooted the computer - I got a text message that said the OS was missing. After a while I tried holding down the Option key while rebooting, then I got several choices to boot from - I chose the windows disk, and windows installation started.
    I was eventually given a list of 6 or 7 partitions to chose from, to install windows into. I  settled on the one marked BOOTCAMP. It seemed the best guess. But the installer said that it could not install on this partition. Something about the wrong format or EFI or boot partition(s)?? In fact, the installer would not let me install into any of the listed partitions.
    I restarted Boot Camp and it allowed me to remove the boot camp partition and revert to OSX only. Thanks for that!
    My questions: is Windows 8.1 supported with my configuration? I know the FAQ says it is not. If in fact it is, did I do something wrong?
    Thanks,
    Doug

    Poking around, I found an installation manual which was downloaded to my USB drive with the boot camp windows drivers. It says that when I reached the point in the windows installer where I'm given a choice of partitions, I should choose the one marked BOOTCAMP, and format it. Which I didn't think to try before. So I tried again, using Boot Camp Assistant from the top.
    Failure again. This time, when the computer rebooted, I selected the Windows icon as before, but I got a text message saying that the boot manager couldn't be found, and a dead stop.
    I also found that on the option-key reboot disk selection screen, I could eject the windows install disk and reinsert it. When I did that, I got the Windows boot icon and another icon labeled EFI boot. So I also tried that icon, with the same result.
    So, I'm doing exactly what I did before (I think), but now the windows installer won't start.

  • Boot Camp and Windows XP right-click

    I have a Mac Book Pro where I have installed Boot Camp and Windows XP with great success. I have one problem; I can not right-click. When I press ctrl+mousepad button it still works as an left-click. Very frustrating. Can anyone please help? And no, I do not have an external mouse
    Best regards
    EtronX
    Mac Book Pro   Mac OS X (10.4.8)  

    Sorry folks Did a search here in the forum and found the answer. To quick

  • Lion, Boot Camp and Windows 7 Issues

    Couple of questions regarding Lion, Boot Camp and Windows 7... I never had issues with Snow Leopard and setting up Windows 7 on my iMac (expcept the dreaded black screen after restart, bu got that fixed)
    Let me start off with my specs and then I will ask my questions:
    iMac 27"
    i7 Quad Core (1st gen)
    16GB Ram
    1TB HDD
    OS X Lion (Fresh Install - Not Upgrade)
    All updates for OS and iLife and other installed software:
    Adobe Creative Suite CS5
    MS Office 2011
    Boot Camp 4.0
    Window 7 Ultimate
    Ok... here are my questions.
    When I fixed my black screen issues after installing a fresh copy of Windows 7 - I had to install MacFUSE and Tuxera NTFS in order to delete the the stock ATI driver so the second rebot on the install of windows 7 would work and boot correctly. After rebotting into my mac side I now always get this message from Tuxera.
    What does this mean? Now in the finder when looking at the computer drives.. It does not show the BOOTCAMP partition...
    However, when I resart i can hold down the ALT key and get this menu:
    I know this might seem strange to ask, but why are the Macintosh HD and the Recovery HD text smoothed and the Windows text not? Being a design I see the difference and it makes me wonder why this is. (It is almost like the BSOD icon apple used forwhen connecting with shared PCs)... Anyways, I can boot into windows when clicking this drive.
    After getting to windows 7 it will not let me run updated. The OS is activated and I have even installed SP1 manually, but it always tells me that the Update service is not running. When in fact it is. I have checked it and it is set to start automatically. I have reset and shutdown my computer more than 10 times... I can't figure out what the issues are.
    Overview:
    Why do I get the Tuxera NTFS error?
    Why can I see the boot camp partion when manually selecting it form startup, but it does not show in OS X
    I can't get Windows to update? Any ideas?
    Thanks for any help you can provide.

    These various utilities like Tuxera are incompatible with Lion. Partly because MacFuse is incompatible. You need to remove them completely.
    As for the Windows partition you might consider using Boot Camp Assistant to remove it. Then make a new partition and install Windows. Remember to use the Windows formatter to format the Windows partition NTFS.

  • I have an older Mac Pro (2006). I want to install Boot Camp and Windows. I have installrg a purchased Snow Leapord on the machine. To install  Windows, am I limited to Windows 7? And where are the Windows 7/Boot Camp Drivers? On the OS disk? Download? Tha

    I have an older Mac Pro (2006). I want to install Boot Camp and Windows. I have installed a boxed Snow Leapord on the machine. And it says the download of the Boot camp drivers cannot continue because they are not available. But at that point I have not inserted a windows disk, so how does it know i have XP?
    So it appears I am limited to Windows 7? And where are the Windows 7/Boot Camp Drivers? On the OS disk?
    Finally, since I have necer considered Windows 7 before, I assume there are no compatability issues with mainstream applications that were running in XP?
    Thank you.

    You're welcome
    Just remember to reformat the partition (bootcamp partition) to NTFS with the windows installer, ensure to pick the correct partition.

  • Boot Camp and Windows XP Questions

    I have a new intel iMac and want to install Windows XP (just for kicks, really). I have a copy of a Windows XP disc that I bought for my dad a couple of years ago. The Boot Camp page says that you have to have Windows XP with Service Pack 2. How do I know if my XP has Service Pack 2?? I went to the windows home page, and one can download Service Pack 2, but the Boot Camp instructions seem to imply that you have to have a copy of Windows XP with Service Pack 2. Anyone have any insight? Will my XP work?
    iMac Intel, Powerbook G4   Mac OS X (10.4.6)  

    Just an idea for you. There is an entire Apple Discussion forum dedicated to Boot Camp and Windows XP.
    Whereas, not everyone here with an Intel iMac has installed, tried to install or has experience with BC & XP, everyone there has or at least has an interest. You may attract help more quickly there.
    The Forum is at the bottom of the main Apple Discussions page under Windows Compatible Technology.
    Here is a link;
    Forum: Boot Camp Public Beta

  • I forgot to back-up my information (pictures, excel documents) on MAC before installing boot camp and Windows.  I am mid-way through the process, at the point where I need to install the drivers. Will i be able to retrieve my documents on MAC or not?

    I forgot to back-up my information (pictures, excel documents) on MAC before installing boot camp and Windows.  I am mid-way through the process, at the point where I need to install the drivers. Will i be able to retrieve my documents on MAC and finalizing the Windows 7 installation (for the 1st time) or not?
    I am worried that  may lose my information... Appreciate any feedback! Note: already half-way in the process of installing!

    Yes, IF you picked the right partition, as in the Boot Camp partition. If everything is done right you should be able to boot into the Mac side.
    If you already booted into Windows and are at the point of installing the Boot Camp Drivers your already done installing Windows! Yea! All you need to do is just install the drivers and everything should work normal.
    The Windows partition and the Mac partition are seen as two different HD's now as far as the computer knows.
    You can use the Boot Camp control panel in Windows to boot into the Mac side and the Startup Disk in System Preferences on the Mac to switch to Windows. If you can't then press and hold down the Option key untill you get the boot screen.

  • Lose airport connection after using boot camp and windows XP

    After using windows XP on boot camp and shutting down windows and booting to Mac OS 10.5.7 I lose the airport connection and have to restart or reset my airport extreme base station. My imac 2.8 is connected to airport via ethernet. Air port is operating on 5.7 version. This is a recent development and suspect it is related to updates in windows. I do not know where to start but need to solve this problem as it interrupts the other computers on wireless. Thanks Carl

    I have solved problem. It was in the windows settings using airport rather than ethernet connection. Carl

  • On boot camp and windows 7 cannot use dimmability keys on wireless apple keyboard.

    Hello,
    I am using boot camp under windows 7 on my mac book air.
    However the dimability keys and sounds keys cannot be used with my wireless keyboard.
    Do you know how to fix this ?
    Many thanks

    The 2007 MacBook Pro only supports 32-bit Windows 7 through Boot Camp although it has got a 64-bit processor, so buy a 32-bit Windows 7 version.
    Boot Camp Assistant (in /Applications/Utilities) will guide you through the steps to install Windows through Boot Camp. Follow Apple's steps > http://manuals.info.apple.com/MANUALS/1000/MA1636/en_US/boot_camp_install-setup_ 10.8.pdf

  • Boot Camp and Windows 7 - uncompatible drivers and BC 3.0

    I recently installed Windows 7 on my MacBook Pro using Boot Camp. The installation wen well but when I inserted and tried to run the OSX setup disc, the system referred to known incompatibilities and aborted. I then tried to run the Boot Camp 3.1 driver but this also aborted, stating that Boot Camp 3.0 was missing. I have tried both the 32 and 64 bit Ultimate version and the Enterprise version of Windows 7, always with the same result. I then reinstalled Leopard (and created a mess in a number of other ways) to see if the 3.0 driver had been deleted by mistake. This did not help however. Is there anything I can do?

    Boot Camp in Windows has nothing to do with Boot Camp in OS X. So, there was no need for you to reinstall Leopard.
    Since you're using Leopard, your Leopard disc will have the 2.xx drivers, which, (apparently) will not install in Windows 7.
    You'll need to get a hold of the 3.0 drivers. The 3.1 update downloaded from the Apple site won't install without 3.0 drivers installed.

  • Removing boot camp and windows

    I have a mac mini with boot camp running windows XP.  I am wanting to remove windows, and all windows components, and only run the the apple OS on it.  How do I do this?

    Open the Boot Camp Assistant in the /Applications/Utilities/ folder and return the drive to a single partition setup.
    (85775)

  • Boot camp and windows 7 but window wont find usb to download support drivers

    Used Boot Camp to partition, downloaded support onto USB zip drive, installed Windows 7 fine I thought, but in Windows 7 now it will not find my USB so i can't download the support drivers from my zip drive back into Windows.  No internet found either (probably because i can't download the support drivers).  HELP QUICKLY please!!!

    Boot Camp in Windows has nothing to do with Boot Camp in OS X. So, there was no need for you to reinstall Leopard.
    Since you're using Leopard, your Leopard disc will have the 2.xx drivers, which, (apparently) will not install in Windows 7.
    You'll need to get a hold of the 3.0 drivers. The 3.1 update downloaded from the Apple site won't install without 3.0 drivers installed.

  • Problem with boot camp and windows 8

    I have a Macbook late 2009 with Mountain Lion. I want to install windows 8 with boot camp but when I am asked to enter drivers, windows 8 don't find them. I have downloaded drivers from boot camp assistant but they don't work. When Apple will provide ???

    Obviously Boot Camp does not support Win 8 at this time. When and IF Apple decides to do that no one here knows. This is a user to user forum. Perhaps you should call Apple support and ask them.

  • Magic Mouse won't stay paired with booth Boot Camp and Windows 7

    So I have a Broadcom Bluetooth 2.1 dongle on Mac Pro 1,1, Lion, Boot Camp 3.3 and Windows 7 latest service pack and latest drivers/operating system. Everything is up-to-date.
    My problem started with Windows 7 not wanting to pair with mini alluminum keybord AND magic mouse. I followed a post somewhere and I was able to get the keyboard to pair and work when I switch between Lion and Bootcamp Windows 7 by removing it from Bluetooth Prefs in Lion, adding it to Windows 7 BC, and then adding it again in Lion.
    However, magic mouse will still work with onlly one: If I add it to Windows 7 and then restart to Lion, add it there and then restart in Windows, it shows as paired in Windows but it does not respond. I then remove it from Windows 7 and add it again, and it works. Then I reboot in Lion. It is on the list, but not connected. Even the option to connect is not available. I try restarting the mouse, no luck. The only way I can get it to work in Lion again, is to remove it and add it again. Now, I go back to Windows 7, It is there on the list, but it does not respond. In short, the Magic Mouse only seems to want to stay paired (or work) with either Win 7 or Lion. Getting it to work with one cancels the other.
    BTW, every time I pair it with Lion, I set it as a Favorite.
    Any suggestions?

    Some more info I have gleaned from my 13" white Core 2 Duo Macbook (not sure what generation - came with Tiger though). If I uninstall the Intel graphics drivers, the Sleep option is gone from Windows 7 but it will hibernate, and when resuming from hibernation the screen comes back on. However, when the Intel drivers are reinstalled the "screen off" problem is present for both hybernate and sleep. Two other data points: the power manager can't turn off the screen (after X minutes, etc) and I can't get any picture on an external monitor either. Just wanted to share.

  • Boot Camp and Windows 7 - closing lid, won't wake up

    Hi all,
    I just installed build 7600 of Windows 7 (32-bit) in Boot Camp on a Macbook I bought around December 2008. For the most part, Windows 7 seems completely compatible with the Boot Camp system. Unfortunately, I'm having problems with the screen remaining black after either putting the computer to sleep manually or by closing the lid. What happens each time is that the computer sleeps the first time I attempt this and then wakes up like normal, but the second time I do it, the black screen refuses to go away. When I close the lid, the little white light on the front of the Mac stays lit (it doesn't flash), and when I open it, it actually turns off(?!?).
    I really don't know what to do about it, and it's super unfortunate because if I forget to not let my computer fall asleep I lose all my work. Has anyone found a successful fix in Windows 7 or even in Windows Vista?
    Thank you everyone.

    Some more info I have gleaned from my 13" white Core 2 Duo Macbook (not sure what generation - came with Tiger though). If I uninstall the Intel graphics drivers, the Sleep option is gone from Windows 7 but it will hibernate, and when resuming from hibernation the screen comes back on. However, when the Intel drivers are reinstalled the "screen off" problem is present for both hybernate and sleep. Two other data points: the power manager can't turn off the screen (after X minutes, etc) and I can't get any picture on an external monitor either. Just wanted to share.

Maybe you are looking for

  • What is difference between == and equals ??? i wanna know in detain example

    Hi 1) String s1 = new String("abs");           String s2 = s1;           System.out.println(s1==s2);           System.out.println(s1.equals(s2)); Output: true true 2) String s1 = new String("abs");           String s2 = s1;           s2 = "abs";     

  • Safari 5.1.1 can't connect to the internet.  Every other browser can.

    I've tried resetting Safari, reinstalling Safari, and resetting my router to factory settings.  Safari still can't connect to the internet, but everything else on my Mac (Snow Leopard 10.6.8) can.  I recently tried setting up Open DNS just because I'

  • How to use application class reference in the controller methods of BSP

    Hi, I have created a bsp application and also created an application class and assigned it to the application class. In the application class, I have created attribute TEXT type string(public and instance parameter). In the controller let's say main.

  • Payment proof.

    PAyment was done on 2nd june, but still no funds received on account.  Tried to make a payment proof, but this was so complicated, that i decided to write right here, Does anyone knows how to send it? Or at least support email address. 

  • Second display causing perpetual restarting

    For the last two years I have used my Mac Pro 2.8 Quad with two displays without any problems. A few weeks ago I had two blank screen after a restart which was only resolved after removing the second display. I changed the second display for a differ