Boot Camp Assistant says There is no USB drive connected to the system

I have a mid-2012 11” Macbook Air and a USB Superdrive. I am trying to use Boot Camp Assistant but it is not letting me proceed. With the Superdrive plugged and Windows 7 (full version) DVD in the drive, I get the message “No USB Drive” – “There is no USB drive connected to the system. Please insert a USB drive to continue.”
I checked using Finder and Go->Computer and there is the Windows 7 installation DVD mounted properly. The Superdrive spins up when I plug it in. I tried both USB ports. I tried re-booting with the Superdrive attached. The laptop is plugged in and there is an internet connection. It is running Mac OS X 10.8.3. I read the Installation and Setup PDF guide and there was no mention of the problem. I searched these forums and found that two other people are/have experienced the same problem, but there is no posted solution.

Randall Venhola wrote:
At the second step in the wizard, there is a dialog with three check-boxes. The only way I can proceed is if I uncheck the option "Download the latest Windows support software from Apple". When checked, I get the "No USB drive" message. Checking or unchecking the other two options does not change the behavior ("Create a Windows 7 or later install disk" and "Install Windows 7 or later"). I have tried with the Superdrive attached with Window 7 in the drive, with a blank DVD and without the Superdrive.
You are not following the Boot Camp instructions. Did you select the option to read the instructions? When running Boot Camp Assistant you are given the option to download the support software. If this is selected you must connect a usb stick that is correctly formatted per the instructions. At this point in the process you sshould not have your superdrive or Windows dvd connected.
Read the instructions.

Similar Messages

HT3986 This what my boot camp says , when ever i am trying to instal windows 7 ''There is no USB drive connected to the system. Please insert a USB drive to continue. "' Can someone help me . ?

This what my boot camp says , when ever i am trying to instal windows 7 ''There is no USB drive connected to the system. Please insert a USB drive to continue.

pump

There is no USB drive connected to the system.

I have plugged in the Superdrive to the new iMac 27 that came yesterday.
This comment is being given when I am in bootcamp.
"There is no USB drive connected to the system."
The Superdrive is plugged into a USB Drive and when you place a cd/dvd in the Superdrive the mac picks up that there is a disk in the Superdrive.
How can correct this issue?

Note: I would like to download the latest Windows support software from Apple onto a DVD so then I can install Windows 7 using bootcamp.
I prefer not to us a flash drive.
What is the easiest way to correct this issue?

HT5639 When I start up in Boot Camp it says that updates weren't properly installed and the system is reloading. It then automatically restarts in Mountain Lion. What is wrong?

When I start up in Boot Camp it says that updates weren't properly installed and the system is reloading. It then automatically restarts in Mountain Lion. What is wrong?
I am currently using Windows 8 and also have Microsoft office installed but those are the only thing on my partitioned space. I don't know if I installed 32 or 64 version of Windows 8. Could that be the problem?

Can you deal with XP not being supported by Apple and Microsoft? no security etc?
Can you use Windows in a VM instead of natively?
All the drives other than the one with XP will need to be pulled.
Always have backups of your system, clone that you can boot from.
Boot Camp 3.0 was the last supported. You don't need OEM 10.4.6 DVD and your system with EFI and SMC updates (Aug/Sept 2007) may not like it.
32-bit version of Windows on EFI-32 will only get 1.9GB RAM.
Installing 64-bit Windows 7 is a bit harder. Vista pre-SP1 64-bit was the best match for install on my 1,1 and that was 2006-2007.
The new owner needs to deal with this, not you. And really they are better off with a $400 PC instead. Or use a VM.
the owner should put in a new SSD for the system and $44 buys 4 x 2GB RAM. Together it will run just fine. 500GB SSD now $250 / $135 250GB. Biggest issue is a video card on these.
The grey screen - you upgraded the graphic card perhaps.
Unplug everything. Hit power for 5-10 seconds. Reconnect cables for mouse/kb and power, and monitor. You just reset SMC. Yes there is a small button - pull drive #4 and any controller in top slot #4 to see the SMC motherboard reset button but you don't need to.
Any PCIe cards can also play a role and factor into XP or Windows not working.

Boot Camp Assistant says Install rather than Partition

I have a second gen MacBook (Intel core 2 duo) I installed Windows XP via bootcamp back when I had OSX Tiger. Today, running OSX Lion, I deleted the windows partition with boot camp assistant, wanting to increase the hard drive size and install Windows 7. I successfully deleted the windows xp partition, and restarted the computer. Now I want to repartition the hard drive and install windows 7. I open boot camp assistant, click continue (only option) check 'install windows 7' and not 'download the latest windows support software from apple' as I already have this on an external hd and click continue. I choose the hard drive size, and boot camp assisnt has the option to 'install' and NOT 'partition'. I dont know why this occurs. anyway, if I click install, boot camp assistant says 'the installer disk could not be found' even though my windows 7 dvd is in the computer.
So, my question boils down to, 'why can't i partition my disk for windows 7?'
Any help would be greatly appreciated! Thanks!

After restoring, I lost my Recovery HD partition. I am currently working to get a new one. Perhaps I will install it AFTER boot camp is finished, which might solve the multiple-partitions error? I could use some advice here.
At this point, bootcamp is giving me a new error which says some files cannot be moved. I am moving this to a new discussion HERE:
http://discussions.apple.com/thread/3298756
Thanks for your help! Please respond to my new thread if you think you can contribute.

Boot Camp Assistant does not allow partiton when my disk is the right format

Boot Camp Assistant does not allow partiton when my disk is the right format - (Mac OS Extended (Journaled) volume).
When I go to the Boot Camp Assistant to partition the Macintosh HD disk, an error comes up saying,
"The disk cannot be partitioned because some files cannot be moved
Back up the disk and use Disk Utility to format it as a single Mac OS Extended (Journaled) volume. Restore your information to the disk and try using Boot Camp Assistant again."
Please help me out! I would really appreciate it!

I was not allowed the Repair Disk option. I tryed Verify Disk, and an error came up saying,
"The volume Macintosh HD was found corrupt and needs to be repaired.
Error: This disk needs to be repaired. Start up your computer with another disk (such as your Mac OS X installation disc), and then use Disk Utility to repair this disk."
What should I do?

How do I get connected to a server on my network via an IP address? When I try to open in a URL and login as a registered user with proper login it errors out saying there was a problem with connecting to the server?

I am new to Mac...How do I get connected to a server on my network via a hyper link IP address path? When I try to open in a URL and login as a registered user with proper login it errors out saying there was a problem with connecting to the server?

Some of the following is going to use some technical terms — this area is inherently somewhat technical.
If you don't understand some part of the following reply, please ask.
Is this your own OS X Server system on your own network, or is this some other server within some larger organization?
You're posting this in the OS X Server forum, which is a software package that allows OS X systems to provide web-based and many other services; to become servers.
If it's your OS X Server on your network, then the network and DNS configurations are suspect, or the server is somehow malfunctioning or misconfigured. This is unfortunately fairly common, as some folks do try to avoid setting up DNS services.
If it's a larger organization and somebody else is managing the server and the network, then you'll probably need to contact the IT folks for assistance; to learn the network setup and DNS requirements, and if there's a problem with the server itself.
The basic web URL "hyper link IP address path" — without using DNS — usually looks something the following, where you'll need to replace 10.20.30.40 with the IP address of your server:
http://10.20.30.40
UptimeJeff has posted a URL that specifies the AFP file system; an OS X file share. That's used if you're connecting to an Apple storage service somewhere on your network. You might alternatively need to specify smb://10.20.30.40 or such, if it's a Windows file server. (There can be additional requirements for connecting to Windows Server systems, too.)
If there's local IT staff available here, please contact them for assistance. If these are your own local systems and your own local OS X Server system, then some information on the server will be needed. (If you're on a NAT'd network, you'll also need to get DNS services configured and working on your local OS X Server system and your network — you'll not be able to skip this step and reference ISP DNS servers here — or things can and usually will get weird.)

What is the correct boot camp version to use with an early 2009 iMac 24 inch? Boot Camp assistant says software not currently available?

I have an early 2009 24 inch iMac. It is running mavericks. When I attempt to download using the boot camp assistant i get the message " software not currently available from server" So I went to the Boot Camp support website and there are about half a dozen versions of the boot camp download. None of them match my hardware. I tried the one closest, but when I went to run the setup in windows, it says my machine does not support x64. I have installed windows 7 home premium x64....It works, sort of. I cant get sound and my magic mouse behaves badly.
Do I need a different version of windows or is there a compatible version of boot camp for my system? Thanks for reading.

If you installed Mavericks then you had Boot Camp 5 installed automatically. If you have tried downloading from Apple's download site you won't find a version other than 4 or 5 that provide a total package.
Boot Camp- System requirements for Microsoft Windows operating systems
Boot Camp- Installing Windows 7 Frequently Asked Questions
Download BootCamp Drivers for Macs to run Windows 7 or 8 | Chris F Carroll
Boot Camp- Some computers require Microsoft Windows 7
Boot Camp Help- Overview of Boot Camp setup

Boot Camp Assistant says "The disk cannot be partitioned because some files cannot be moved." What can I do?

I am trying to install Windows 7 Ultimate on my MacBook Pro that runs OS X Lion. I have read through a lot of the other threads and I think I understand that the I need a clean, defragged part of the hard drive to do this on. Boot Camp Assistant tells me to "Back up the disk and use Disk Utility to format it as a single Mac OS Extended (Journaled) volume. Restore your information to the disk and try using Boot Camp Assistant again." That's all good and everything, but I don't have any idea how to do that. I don't want to risk losing any of my data and I don't want to download any "freeware" to try and help me accomplish this task. I would like a step by step guide on how to make this work. Also, is there anyway that I could have prevented this error? I don't understand why Boot Camp Assistant is even on my MacBook Pro if everyone that uses it will get the same error. I have done nothing but taken it out of the box and started using the Apple software that came installed on it. If there is not a simple way to do this in the Disc Utility, then I don't want to do it at all. I really don't like the idea of putting all my data on an external hard drive just to have this done.

Just installing OS updates and programs will
Write the installer
Uncompress the file at say 7x and write the actual installer in a free area that often may be anywhere but at the far end of the partition is common.
Write new version or copy of the files being changed/updated (myfile.new and myfile.old)
Delete the entry in the directory for the temp files and versions.
A program that can show your hard drive and where files are and where free space is, and show fragments.
OS X tries to eliminate small files with fragments when they are rewritten and when it can find contiguous free space to write the new file.
That can actually work against you, as it might fragment the free space also.
When a drive gets down to 20% free space there is a performance hit, you are using slower areas of the drive (inner tracks are usually 50% slower) and having more trouble finding filles and where to write files.
Clone Mac OS is one of the easiest and safest methods.
Click on source (Mac Harddrive), click on or drop the backup partition / drive into target icon.
Click "Run"
you end up with bootable (test it to be certain) exact copy.
Unplujg and keep it on a shelf
Update it before you inistall a new version etc of OS X or make changes.
Have two: one safe on the shelf from Week #1 and new Week #2
Disk Utility can do that.
With huge hard drives free space should not be an issue. The lack of a feature to defrag as part of Boot Camp or Disk Utility is why there are iDefrag and others, but they are slow and best run from.... a 2nd hard drive running OS X rather than from CD. and never great idea to do w/o backups or on live system.

Boot camp assistant says "not enough space" with 35GB available!

I have recently cleared space on my hard drive to accomodate a 64bit Windows 7 partition, which I wanted to make with boot camp assistant.
I made absolutely sure I had plenty of space; in fact, I have no less than 35 GB of space available on my startup disk. HOWEVER, the amount of space on my hard drive seems to be constantly changing. I believe this is due to time machine's hidden background backups which automatically fill up an expandable partition entitled "mobilebackups".
Boot camp assistant constantly gives me the following error: "The startup disk does not have enough space to be partitioned. You must have at least 10 GB of free space available."
This is on a 2.2GHz 15" SR MacBook Pro 2007 with 6GB RAM. I am running 10.7.1 (LION). Perhaps this has something to do with the recovery disk or the mobilebackps partition being treated as one or more separate partitions, as boot camp will only partition a drive with a single partition. However, I have not heard of this error anywhere else.
Thanks for your help in advance! I am a rather experienced user, so feel free to use advanced terminoligy if you wish.
PS Attached are screenshots of the error message and of my HD's info (free space highlighted)

After restoring, I lost my Recovery HD partition. I am currently working to get a new one. Perhaps I will install it AFTER boot camp is finished, which might solve the multiple-partitions error? I could use some advice here.
At this point, bootcamp is giving me a new error which says some files cannot be moved. I am moving this to a new discussion HERE:
http://discussions.apple.com/thread/3298756
Thanks for your help! Please respond to my new thread if you think you can contribute.

Boot Camp assistant says I need 10GB

I cannot run boot camp assistant. It says i need minimum 10 GB, while finder tells me that I have 50GB avaliable. Disk utilities says I have only 19GB, but still more than 10. What can I do?

briancollette wrote:
Today I was updating my bootcamp partition and after I removed it I opened BCA and it gave me a message saying that my computer must be updated before I can use the utility. Has anyone else had this problem?
As I recall the [1.7 firmware update|http://support.apple.com/kb/HT3561] came out fairly recently. Is it possible that you did not do it. This issue is kind of hard to track down. [I went here|http://www.apple.com/support/snowleopard> and searched "Search Support" on "bootcamp update computer." I turned up a number of possibilities, but have no idea which might be "the" one.

Why does Boot Camp Assistant say...

"Boot Camp Assistant can not run until you upgrade your sytem software to the latest version."

I used DG3 to initialize the HD, which essentially erases the disk if I understand correctly. I haven't used Superduper before, so perhaps that's worth looking into.
I did mentioned the use of DG3 to ensure that I had a single disk partition. I guess the restore from a clone or Time Machine was implied...
;o)
Thanks for putting some effort into helping me. I'll look at Superduper and let you know if that gets me anywhere...

Boot camp Assistant says Im not connected to the internet even though I am

When I get to the part where I need to burn a disk or save to external drive it says I can`t because I`m not connected to the internet even though I am and I have no idea what to do.

Update Server
Try:
- Powering off and then back on your router.
- iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
- Change the DNS to either Google's or Open DNS servers
Public DNS — Google Developers
OpenDNS IP Addresses
- For one user uninstalling/reinstalling iTunes resolved the problem
- Try on another computer/network
- Wait if it is an Apple problem

Where is iso file in boot camp support download to copy to usb drive?

I am attempting to install Windows 7 professional 64 bit on a 21" imac. I have downloaded boot camp support software 5.0.5033. I have a 4gb flash drive installed. When I run boot camp I am asked to install a iso image. I can not find an iso image. I have tried using msft.digitalrivercontent.net/win/x17-59186.iso and let it run for up to 4 hours and I get a message that the server cannot be found.
Any suggestions on what I am doing wrong?

Follow the Apple's steps to install Windows > http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.8.pdf When you have installed Windows, install the Boot Camp support software you have downloaded

Can I perform a Time Machine backup to a USB drive connected to the Time Capsule 3TB

I would like to perform Time Machine backups to a portable USB drive, to use as an off-site backup copy. However, when I plug the drive into the Time Capsule (3TB) it isn't seen by Time Machine from any of the computers on my network. What do I need to do to make this work?

I'm not sure about whether Time Machine can include a drive that is a month out of date in a normal rotation.
This won't be a "normal" rotation. Assuming that you have already configured Time Machine on each Mac to back up to the USB drive, when you connect the drive to the Time Capsule, you will need to manually click Backup Now on a Mac to get the backup started. Then, do the same with other Macs that you want to back up.
You could wait and see if Time Machine will start to back up on its own, but the wait would be unpredictable as far as time was concerned.
Time Machine will also spend a good deal more time in the "Preparing" stage since it will have to look a month of history on the Mac since the last backup.
It is set up and recognized in the Airport utility, and mounts normally. I can see the files using finder, but I can't get Time Machine to recognize that it is there and available for backups.
So, if you open System Preferences on a Mac,
Then, open Time Machine
Click Add or Remove Disk
The USB drive doe not appear as a potential destination?
Have you restarted both the Mac and the Time Capsule?
Any recent changes to the Mac.....like installing a new operating system?

Boot Camp Assistant says There is no USB drive connected to the system

Similar Messages

Maybe you are looking for