Boot Camp sees my internal SSD as an external drive - can't install Windows 7

I've just replaced my old 1TB drive on my Mac Pro (mid 2010) with a 1TB Samsung 840 EVO. To get the best speed I've installed it using the Sonnet Tempo PCIe interface. I performed a fresh install of Mavericks 10.9.1 and the system absolutely flies.
However, I wanted to also install Windows 7 but Boot Camp Assistant will not allow me to do this. It warns....
You cannot partition an external disk, a RAID disk or an internal disk on which FileVault encryption is in progress.
When I look through the system information, my SSD is reported as an external drive - which is why I guess BCA refuses to partition it (and ghosts out the option to install Windows 7 or later version.
Here's the system information under storage...
MAC SSD:
  Available:          941.47 GB (941,471,612,928 bytes)
  Capacity:          999.35 GB (999,345,127,424 bytes)
  Mount Point:          /
  File System:          Journaled HFS+
  Writable:          Yes
  Ignore Ownership:          No
  BSD Name:          disk0s2
  Volume UUID:          DED0438B-7A12-3AB0-8E6D-E6911C595CA2
  Physical Drive:
  Media Name:          Samsung SSD 840 EVO 1TB Media
  Medium Type:          SSD
  Protocol:          SATA
  Internal:          No
  Partition Map Type:          GPT (GUID Partition Table)
  S.M.A.R.T. Status:          Verified
So my questions are... Why does OSX identify it as an external drive? Is it because of the PCIe interface? And, more importantly, how can I get around this to allow me to install Windows 7? Could I temporarily remove the PCIe card and install the SSD in a standard drive bay and then run BCA? Any ideas???
Thanks.

Kappy is dead on with 1 more tweak ... remove the PCI card, and put the SSD back onto a normal drive bay and fully install Windows.
Then, put the empty PCI card back into the machine and boot into both OSX and Windows ... both OSs should work just fine.
Now, put the SSD onto the PCI sled and test both OSs.

Similar Messages

  • Boot Camp on 2nd Internal SSD, Mid 2009 3.06Ghz MBP, Won't Boot

    Hi everyone!
    I have a mid 2009 3.06 Ghz MacBook Pro that had a finicky SuperDrive and bad hard drive. I replaced the SuperDrive with an optical drive -> SATA drive bay and the original hard drive and now have 2 SSD's (Crucial M4s) inside my comptuer. I wanted to use Boot Camp to install Windows 7 64bit Professional on the SSD in the "optical drive" and got it to succesfully install. However, the computer refuses to boot to that drive after installing updates; every time I say "boot to Windows," a black screen with a blinking cursor shows up and never disappears. I can boot to it if I attach my Windows 7 installation DVD via an external DVD USB drive, but that is obviously not a true solution.
    Any suggestions?
    Thanks!
    Aaron

    Still having issues, any suggestions would probably be helpful.

  • Boot Camp Installation: Definition of, and insights into "External Drives"?

    I'm recovering from a logic board failure. One casualty was that I lost my prior Boot Camp installation of Windows on my main internal hard drive. :-( Wondering if I can install Windows anywhere other than the main internal hard drive so I can maximize space on my OSX main internal drive?
    From what I've gathered, installing Windows 7 Boot Camp is very difficult (and perhaps impossible?) on an external hard drive. However, what's not entirely clear is what constitutes an "external drive".
    Questions:
    1. Can I install a bootable installation of Windows 7 using Boot Camp (obviously not running OSX in this scenario) on either the:
         A) Data Doubler 7,200 drive
    or
         B) Express Card 34 SSD drive
    2. Can I also install Parallels (on the main internal OSX drive), then while in OSX launch (a much slower) Windows from location A or B?
    Context:
    1.  On a late 2011 MBP 17' (version 8,3), I've replaced the stock hard drive (7,200 rpm) with a much faster OWC SSD Drive. (Awesome upgrade, btw!)
    2. The internal apple dvd device was removed and the stock hard drive was inserted in this location using OWC Data Doubler. (Also, very nice.) An extra challenge here is that the dvd drive is now an external device. I have a Windows 7 install disc, but I'm not sure if it will be recognized during the installation process?
    3. This model MBP has an ExpressCard 34 slot, for which I can buy an SSD drive. Never used this slot and have read mixed reports on boot ability.
    Any and all insights greatly appreciated!

    Yoüf wrote:
    Many thanks for the helpful response, Loner T.  I think I've got it. To install Windows through BCA on the Optibay drive, I temporarily move it to the main SATA bay. I can then temporarily put the DVD drive back in the Optibay. So here's a question: In doing this, I would no longer have an OSX boot drive (since I'm temporarily removing my OSX boot SSD). It's been a while since I used BCA, so my memory is fuzzy (sorry), but does the BCA process need a working OSX install on the drive in the SATA bay?
    The SSD with OSX boot is normally (for your specific scenario) kept in an external enclosure (USB/FW/TB) to boot from and run BC and partition the disk in the main SATA bay.
    You mention that modifying the BC info.plist causes issues. I lost you a little here. Using the method you describe (move the Optibay drive to the SATA location, run BCA to install Windows, then move the drive back to the Optibay location), does the BC info.plist need to be modified or not?  If yes, a few more details would be welcomed. If not, what prompted this thought?
    If you have a functional Optical drive and the designated Windows-to-be in the proper bays, the BC info.plist modifications are unnecessary, and can cause other grief, and are best avoided.
    Thanks also for the bleeptobleep post. It says to use a USB3/Thunderbolt external drive (which I do have); however, my MBP (version 8,3) only has USB2 ports. I realize that a USB2 port will read a USB3 external drive, but was wondering if this limitation is a deal breaker for a bootable Windows system, or if it just means that things will be really, really, tragically slow due to low transfer rates. Any idea on this aspect?
    USB3 can cause problems for Windows 7 installer, bot not as many issues for Windows 8+. It is better to stick to USB2, but you are correct it will be slow. OSX can boot and will use RAM much more aggressively, unless it has to go back to the USB (2/3) when things may give you a beach ball. Windows 7/8 are less friendly for caching the whole OS and applications in RAM, and may be slower. A TB connection is much faster (TB2 even better).
    BTW: Bummer that the ExpressCard slot can't work for booting into Windows. That would be pretty slick. I've seen some older posts by folks who were once able to do this, but seemingly only with early versions of OSX. Apparently newer OSX versions either did away with this feature, or seriously complicated the process. Would love to find a workaround if one exists.
    You can test it, but may have some issues finding storage for ECards.
    (Dumb question: on this forum, how are you threading comments into a quoted block of text? Are you using HTML or is there some easier way?)(((
    Under the "Reply" bar at the top, there is an icon with a "quote" and a "speech" bubble, which is used to quote posts. You can either quote from a previous post, or select a line (or more) of text and click on that icon.

  • According to the apple website I need to upgrade Boot camp 3.0 to at least 3.1 in order to install Windows 7 on my iMac currently running Snow Leopard. I download the 3.1 version but it is only a text file and there doesn't appear to be any way to upgrade

    In order to install Windows 7 on my iMac I need to upgrade bootcamp to at least 3.1  I currently have 3.0.4 After downloading from the website there is no way to install it - it is just a text file? What should I do?

    You have to start with 3.0, which is on the OSX disc that came wih your Mac.

  • Can I install Windows on my iMac 27, 3TB Fusion Drive, late-2012 with Boot Camp 5?

    Hello. When I first opened the Boot Camp Assistant app, it said it could not work with the 3TB fusion drive. With the updated version of Boot Camp, the option to install Windows appeared. I tried to install Windows 8, but the loading bar stopped moving. I waited for hours, but it still did not move. I decided to quit the app, and re-open it, in order to try again. It crashed, and would not open. So I restarted my system and when I did that I noticed that I had about 1GB or so left of storage. This shocked me, because the disk was just suddenly filled for some reason. In hopes of fixing this I used an app called 'CleanMyMac' to try and recover the disk space. And as I thought the disk space returned to normal. However when I went to Disk Utility and clicked 'repair disk' it said this...
    There is only 1 partition, so the Boot Camp process did fail.
    I don't know whats wrong with my system though? I would like to install Windows, but I'm worried that I might recieve errors again. I have not got Apple Care, but I'm playing on buying it soon, due to it being almost a year since I bought the system.
    Maybe I did something wrong when trying to install Windows with Boot Camp? I don't know, but if possible can someone please tell me if I can install Windows and if something is wrong with my system.
    Here is some additional screen shots of the type of system I have.
    Thank you for your help with this issue!

    Which copy or version of Windows? and how where was it purchased?
    my window installed itself perfectly on another computer.
    One copy and you want to activate on two computers?
    With 16GB, it will try to create 16GB hibernation file, 24GB page file, and need 20-30GB for the OS, plus room for temp, cache, applications, 9GB just temp to install SP1 update(s). 
    did you create 80GB or larger partition?
    also, some macs with ssd + hard drive have issues, and of course you need Windows 7 64-bit home premium (Pro to use more).
    OWC has up to 32GB, not cheap.
    http://eshop.macsales.com/shop/memory/iMac/2010/DDR3_21.5_27
    Crucial is usally very helpful, try email cs.

  • I have recently purchased a hybred 750GbHDD as an upgrade for my MAC Book Pro (Intell Version) I have a boot camp partition to the original 500GB HDD. How can I expand both partitions to fit the new drive?

    I have recently purchased a hybred 750GbHDD as an upgrade for my MAC Book Pro (Intell Version) I have a boot camp partition to the original 500GB HDD. How can I expand both partitions to fit the new drive?
    I have tried bootcamp and have had no luck due to the fact that boot camp doesn't see the additional HDD space of 250Gb. What am I not doing?

    Ouch, well there is a problem.
    This is the stack of partitions on your old drive
    EFI (hidden)
    Lion (50GB say)
    Bootcamp (50GB say)
    Lion Recovery Partiton (hidden)
    This is the same stack on your new drive imaged from the old one.
    EFI (hidden)
    Lion (50GB say)
    Bootcamp (50GB say)
    Lion Recovery Partiton (hidden)
    Emtpy Space (100GB say)
    This is what you want
    EFI (hidden)
    Lion (100GB say)
    Bootcamp (100GB say)
    Lion Recovery Partiton (hidden)
    EFI has to be at the top of the drive and Lion Recovery has to be at the bottom of the drive.
    And you only have four partitions.
    You can't move the Lion Recovery Partition or Bootcamp partiton, however you can expand the Lion Partition into empty space below it. (but can't delete or move the Lion Recovery partition)
    Your Duplicator duplicated perfectly, too perfectly Likely would work with same sized drives/partitions.
    This is what your going to need to do.
    You need to move the Bootcamp partition to a blank external drive using WinClone and disconnect. This is so you have two backups of it. (one on your old 500GB drive)
    You will need a drive enclousre or IDE/SATA to USB adapter cable for the older 500GB drive and option key boot from it. (some enclosures can't be booted from so check first Other World Computing is good place to ask)
    Download the free Carbon Copy Cloner, grab any new files off the new 750GB internal drive to the old 500GB your booted from.
    Open Apple's Disk Utility and Erase with Zero option the entire internal 750GB drive and let it rip, this will map off as many bad sectors and improve reliability.
    Now use Carbon Copy Cloner to clone the 500GB Lion + Lion Recovery Partitions to the internal 750GB, it will "fix" things and place Lion Recovery at the bottom of the drive where it belongs, give all the extra space to OS X Lion.
    Next your going to have to follow WinClones instructions to restore your Bootcamp, likely you will have to recreate the Bootcamp partition first (in Bootcamp) to the size you want and then clone. Likely Winclone may "fix" Windows to recognize it's in a new larger partition now. I don't know you'll have to check as I haven't used it.
    When Bootcamp creates the partition it will place it near the bottom next to the Lion Recovery Partition.
    As you know you will have to re-validate Windows with Lord Redmond or it expires as you changed the hardware.

  • Can I install Windows on my Mac without Boot Camp Assistant?

    I was wondering if this was possible, or does Boot Camp Assistant format the hard drive in such a way that makes it possible for Windows to be installed, or can I just create a new partition myself and format it and install Windows without having to touch Boot Camp Assistant?

    Windows on Intel Macs
    There are presently several alternatives for running Windows on Intel Macs.
    1. Install the Apple Boot Camp software.  Purchase Windows XP w/Service Pak2, Vista, or Windows 7.  Follow instructions in the Boot Camp documentation on installation of Boot Camp, creating Driver CD, and installing Windows.  Boot Camp enables you to boot the computer into OS X or Windows.
    2. Parallels Desktop for Mac and Windows XP, Vista Business, Vista Ultimate, or Windows 7.  Parallels is software virtualization that enables running Windows concurrently with OS X.
    3. VM Fusionand Windows XP, Vista Business, Vista Ultimate, or Windows 7.  VM Fusion is software virtualization that enables running Windows concurrently with OS X.
    4. CrossOver which enables running many Windows applications without having to install Windows.  The Windows applications can run concurrently with OS X.
    5. VirtualBox is a new Open Source freeware virtual machine such as VM Fusion and Parallels that was developed by Solaris.  It is not as fully developed for the Mac as Parallels and VM Fusion.
    Note that Parallels and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc.  There are performance differences between dual-boot systems and virtualization.  The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system. See MacTech.com's Virtualization Benchmarking for comparisons of Boot Camp, Parallels, and VM Fusion. Boot Camp is only available with Leopard or Snow Leopard. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows.
    You must also have an internal optical drive for installing Windows. Windows cannot be installed from an external optical drive.

  • How can I install windows 7 using boot camp, if the partition will not format correctly?

    Hi All,
    I'm new to this forum and have had a chance to look around a little bit, but haven't really found an answer to the problem that I'm having.
    I have an imac and I'm attempting to use boot camp.  I have used it in the past, with prior versions of mac os x, but this is the first time that I have tried it with 10.6.8.  The first thing I found out is that I can't use Windows XP, even with service pack 2 installed, because it doesn't find the "boot camp" partition.  So, I recently obtained a full retail copy of Windows 7 and have been trying to install it.  I have no problem with the boot camp assistant creating the new partition, 200 GB.  However, when I insert the Windows 7 DVD and the computer restarts in the Win 7 install screen it tells me that I cannot install Windows on the selected partition (which I expected to see.)  So I choose "format" the further format the partition.  It doesn't ask me how I would like to partition this, but just seems to start.  All seems to go fine until it finishes and i see the same message of "Windows cannot be installed in the selected partition."  I can click on the format tab endlessly but it still doesn't seem to work.  Does anyone have any ideas?  I've called Apple and their technicians keep telling me that I need to reinstall the Mac OS again, which I've tried.  It doesn't seem to help either.
    Thanks in advance for your help,
    DTK

    David Kaff wrote:
    Yes, I choose "Format" under the advanced options screen.  It seems like it formats, but then I get the same message of "Windows cannot be installed to this disk.  The selected disk is of the GPT partition style."  I can continue to click "format" but i keep getting the same error.
    There is the answer, right in front of us ....
    Delete the bootcamp partition and start again the correct partition type is GUID but BootCamp should take care of that automatically so try again.

  • Can´t install windows 8.1 because boot camp can't partition the disk. I´ve follow many tips but they did´t work

    I can´t install windows 8.1 because boot camp can't partition the disk. I´ve follow many tips but they did´t work (backup, reinstall os, erase space, etc.)
    Macbook pro retina
    os x yosemite 10.10.2
    Thanks

    There are several possibilities.
    1. You do not have contiguous free disk space.
    2. BCA has failed, or you may have a Fusion drive which is causing problems.
    3. You have incorrect permissions on the disk.
    4. Can you boot in OS X Safe Mode - OS X: What is Safe Boot, Safe Mode? - Apple Support?

  • Can i install windows 8 on my mbpr using boot camp assistant?

    can i install windows 8 on my mbpr using boot camp assistant?
    pls help

    Go to the Bootcamp forum where the Bootcamp gurus hang out. https://discussions.apple.com/community/windows_software/boot_camp

  • I can not install Windows 7 By applying Boot Camp

    Hi
    I have a problem
    I can not install Windows 7
    By applying Boot Camp
    I have a message appear
    Boot Camp does not support installing Windows on this Mac.
    Boot Camp does not currently support installing Windows on a Mac with a 3 TB hard drive.
    Hardware
    3.4GHz Quad-core Intel Core i7, Turbo Boost up to 3.9GHz
    32GB 1600MHz DDR3 SDRAM - 4x8GB
    3TB Fusion Drive
    NVIDIA GeForce GTX 675MX 1GB GDDR5
    Apple Magic Mouse + Magic Trackpad
    Apple Wireless Keyboard (English) & User's Guide
    Accessory Kit
    Software
    iLife '11
    OS X Mountain Lion
    Apple did not you tell me about this problem at the time of purchase 
    Is there a solution to the problem ?

    Unfortunately, I can not partitioning Alhardsk such manner described Palmqal
    http://im32.gulfup.com/mGuB1.jpg
    http://im36.gulfup.com/hLrW1.png
    http://f.cl.ly/items/04323L1k173F1r2h0v3b/Screen%20Shot%202013-01-30%20at%203.56 .21%20PM.png
    Is there another application that divide Alhardsk ?

  • HT5628 When I install Windows 8 on my MacBook Pro(13-inch,Early2011),the Super DVD Drive doesn't appear in Windows 8 and installing Boot Camp 5 drivers doesn't solve my problem,what can I do?

    When I install Windows 8 on my MacBook Pro(13-inch,Early2011),the Super DVD Drive doesn't appear in Windows 8 and installing Boot Camp 5 drivers doesn't solve my problem,what can I do?

    Go into your system preferences and click the startup disk icon then select your Mac HD. 

  • Boot camp 4 can't install windows support drivers

    Hi everyone,
    I have the new imac 27" with thunderbolt and preinstalled Lion. They dont give you a CD.
    I run Boot Camp assistant (version 4.0) and try to install windows on a purchased DVD Windows 7 x64 ( i am a recent convert to mac but still need some windows proggys.)
    Ok so once I run the installation It asks me to download the windows support drivers... I do this but then it stops 3/4 through the process and comes up with an error "can't install windows support drivers".
    Do any of you out know how to fix this???
    Also If I dont use the option to update the software before installing and just select install windows 7 (second option) from a disc. It installs windows fine BUT it wont install any of the network, usb, camera, graphics and sound drivers. so basicaly I am blocked from the internet for windows to update the drivers. I also cant get the driver files from another computer as the mac in windows mode can recognised usb sticks as the drivers arent installed.
    I need help urgently on this as it is doing my head
    Thanks in advance.
    Daniel!

    Yes, but.
    Open Network Preferences>Network>Advanced>Proxies and uncheck everything (try Passive Mode on, and off, but no auto Proxies)
    And try again.

  • How can I install Windows 7 by USB? MacBook late 2008 10.6.8 Boot Camp 3.0.4

    Someone please help...
    I have tried software update and no luck. I think my Boot Camp on Mac 3.0.4 is not showing me the right option on creating a USB installation. It asks me to load Windows 7 CD when I don't have it, I bought it online... Every download I tried from Apple is .exe and I am losing hope on this one...

    You can only install Windows from a USB with one of these Macs:
    - MacBook Pro with Retina display.
    - Mac mini (Mid 2010 and later).
    - iMac (Late 2012).
    - MacBook Air.
    If you bought Windows in Internet and you got it in a ISO image, you can burn it into a DVD. Simply double-click the ISO image, open Disk Utility, right-click the ISO image in the sidebar and burn it

  • How can I install Windows 7 through Boot camp?

    I have a MacBook Pro Mid 2009 and I am running OSX Mavericks. How can I install Windows 7 from the install DVD? Thank you for the help in advance. Just as a side note, if I want to run GTA 4 on Windows 7 through Boot Camp, will it be faster than it is on Parallels? Thanks again.

    Games work much better in Boot Camp. Note that a virtual machine does not use all the performance of your MacBook, so they may work worse than in Boot Camp.
    Your Mac supports a 64-bit Windows 7 version, so open Boot Camp Assistant (in /Applications/Utilities), tick the options to download the Windows support software and install Windows, and follow its steps. Apple has got all the steps you need to install Windows > http://manuals.info.apple.com/MANUALS/1000/MA1636/en_US/boot_camp_install-setup_ 10.8.pdf
    Remember to install the Windows support software after installing Windows

Maybe you are looking for

  • Help with sound to LCD TV when using HDMI

    I would love any assistance with a problem I am having. I have a new mac mini with a 40" Proscan LCD. I am using a mini-DVI to HDMI adapter and am getting great video - 1080. My issue is that via Keynote I need to get sound to the LCD TV. It is comin

  • Does the alarm clock drain the iPhone 4 battery?

    My iPhone 4 battery drains overnight and I was wondering if the alarm clock has something to do with it. If this is not the case, is there a way to not have the battery drain overnight? Please let me know of anything you know to conserve battery life

  • Permanently Removing a Program Icon From the Taskbar

    I'm runnning Windows 7 and have the Skype icon both on the desktop & the taskbar - is there a way to remove it permanently from the taskbar ? if I right click the taskbar icon & pick quit Skype it is removed but reappears when I open Skype from the d

  • Error in multiple switch condition

    Dear All, In my workflow i have a multiple condition step in which i am using SWITCH which on execution gives the following error : 1.Work item 000000004008: Object FLOWITEM method EXECUTE cannot be executed ->Error when starting a SWITCH branch. Thi

  • Slowing Down Arrow Keys when Drawing Geometric Shapes?

    I have a MacPro Intel 8-core with 16 GB RAM and running Mac OSX 0.5.6 and AICS4. I also use a WACOM Intuos3 Tablet. This is not a new problem - also happened with AICS3. When I try to draw a shape - say a polygon, or star, etc., the up/down arrow key