Boot-camp/Windows 7 Network Help Needed

I recently installed Windows 7 Ultimate using Bootcamp to my macbook pro from mid-2011 and i installed it fine but its not picking up any wi-fi on windows 7 at all.

So are your drivers installed. Did you download the drivers to a USB or burn to a disc from BootCamp install?
Windows drivers won't work. If all you installed was Windows then you still need to install bootcamp drivers.
If by chance you have installed drivers then I suggest moving closer to router to make sure you have a decent signal. I have to say I have found Windows 7 in BootCamp to have a weaker signal then in OS X. Not sure the reason although several months ago I found that the driver for the WIFi card seems to set power level lower to conserve battery life I suspect. I raised the power level in driver settings and got significantly better signal levels.

Similar Messages

Boot Camp Windows 7 download help?

So i just used boot camp to download windows 7 onto my macbook air, and everything worked out fine… or so i thought. The windows 7 runs smoothly and everything, and the reason I wanted Windows on my mac is so that I could play online games which like 90% of them don't work on mac… So i go to download a game I have been wanting to play, and it says I need to download adobe flash first. So when I go to download adobe flash, it says there is an error, and that I have no available disk space in the C drive !!(i am pretty sure it was the c drive)... so ***?!?! I just gave 20 GB to windows 7 and it says i have NO AVAILABLE DISK SPACE?!! I am so confused… so please help…. why after i just partitioned 20 GB to windows 7 on my mac computer does it say that there is no available disk space?

20gb way too small, if you're going to game you should give windows at least 60gb
also disable hibernation and the page file (google) on your air after getting windows installed

Please help with my Boot Camp/Windows problems

I need to install windows on to my iMac to continue a course I’m taking at uni. Sadly it’s been a nightmare so far.
I backed up all of my data and opened Boot Camp Assistant and tired to partition a section of my hard drive for windows. However it gave me an error each time I tired. After asking around I was told to buy idefrag and that should fix the problem - it didn’t. I was then told to format the hard disk and reinstall OSX. I did that and Boot Camp was now happy to partition my hard drive.
I insert a copy of legitimate copy of Windows 7 Professional (x64) and clicked the Install Windows button when Boot Camp prompted me to.
Windows installation menus open after a quick restart but quickly tells me it cant see any partitions/drives to install on.
I googled the problem read that the partition should be formatted to NTFS for windows seven to install and that OSX wont do that. I installed a free program called NTFS-3G and that formatted the partition to NTFS.
Windows now saw the drive and went through the installation process. After it has gone through its automated routine it restarts the Mac and takes me to a "Press any key to boot from CD or DVD..."
I press Enter and it takes me back to the very first installation menu and restarts the whole thing until it has once again gone through its automated routine and restarted the Mac and told me to press any key.
This happened ever time. During the install I am presented with the options of "Installing Windows" or "repairing windows". When I tried the automatic repair it told me it could find no fault.
So I started again by deleting the partition from within OSX and making a new one and installing windows and restarting but this time remove the windows 7 disk.
All this did was boot the Mac up in OSX. I then restarted the Mac and held down the options key. This presented me with the choice of booting from the Mac HDD or the windows partition. I chose the windows partition and it takes me to a black screen with a flashing line/prompt and does nothing else.
I assumed Windows 7 might not like my Mac for some strange reason so brought a copy of Vista business with SP2 (x86).
I deleting the partition from within OSX and made a new one. I began installing Vista. It told me it could only install on NTFS formatted partitions/drives.
Once again I used NTFS-3G to formatted the partition to NTFS and relaunced vista.
It installed fine and restarted itself. Once again it took me back to the first installation screen just as windows 7 did. I tried restarting without the disk (hold options again) and it took me back to the black screen with the flashing line and sat there forever.
I restarted the Mac with the OSX 10.6.1 install disk in the drive and it booted up ignoring the disk. I launched the disk from desk top and looked through the install options hoping to find some drivers or extra installs for boot camp/windows. I couldn’t see anything.
I don’t know what else to try.
I have a 21.5' iMac:
Model Name: iMac
Model Identifier: iMac10,1
Processor Name: Intel Core 2 Duo
Processor Speed: 3.06 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 3 MB
Memory: 4 GB
Bus Speed: 1.07 GHz
Boot ROM Version: IM101.00CC.B00
SMC Version (system): 1.52f9

Re-read in the PDF guide in Boot Camp Assist where it tells you to format the "BOOTCAMP" FAT volume when in Windows.
http://www.apple.com/support/bootcamp
But I have really only one question:
Was this an electronic school download edition? they offer students Windows 7 Pro. If this was an electronic version from school, fine, but it has to be burned at *reduced 2x speed* or it won't work, and can have various (and different for everyone) problems, BUT: it is pretty well known and semi "documented."
You do NOT need NTFS driver. That is totally wrong.
Sorry you bought Vista, I used it but once Windows 7 went Beta and then RC I've used 7 and never looked back (what Vista should/could have been but was not, even with SP2).

I have to run Windows for work, which is best Parallels, Fusion, or Boot Camp? I won't need to share anything with the Mac Side.

I have to run Windows for work, yuk! Which is best Parallels, Fusion, or Boot Camp? I will not need to share anything with my Mac side as I will just be running one program to chat on the web and send Emails.

Parallels, Fusion and VirtualBox are all virtualization applications, they 'virtualize' (create) a Windows environment on your Macs OSX operating system.
Boot Camp makes a compatible partition on your hard drive so you may install windows on it directly.

Help boot camping Windows XP!!!

So I'm having major problems boot camping Windows XP onto my Macbook. I have tried unsuccessfully about 5 times now and every time have to fix my computer by rebooting from the OSX Disc, writing to zero my hard drive and then reinstalling the OSX.
So, my problem seems to be the partitioning of the hard drive. I use Bootcamp manager to partition 15GB for Windows. Then I insert my Windows XP disc. My first problem was that the partition that was available was "C: Parition 1 Unknown" and not "C: Partition 3 <BOOTCAMP>[FAT 32]". But I carried on anyway. Then my second problem was that I could only format to NTFS and not FAT even though my partition was not larger than 32GB. Then lastly, even after I ignored all that, formatted the partition to NTFS and tried to keep installing, I encountered upon a page telling me that there was already an operating system on the partition. This is where I always abort my attempts.
Then I had another problem when I tried again. The size of the partition that came up was 130570MB which is around 130GB. How could this be? Is my computer assuming the main OSX partition is the Windows partition and is trying to let me install Windows onto that? I have no idea what is wrong with my computer and I am going crazy (tear my hair out crazy). Please help anyone Thanks in advance.

Hey HairLikeSnow and welcome to the forum -
I have never setup BootCamp on my machine but I've set it up for others a couple times and each time I had the [*Boot Camp Installation & Setup Guide*|http://manuals.info.apple.com/en/bootcampinstall-setup.pdf] handy. I can't believe I just got lucky. Perhaps you should take a look by clicking the link I provided and see if there's a flaw in your procedure.
I hope this helps -GDF

Wireless issues with MacBook Pro i5 in Boot Camp Windows 7 x64

I have a 2010 Macbook Pro i5 15''. I'm usually connecting to the 802.11n 5Ghz wireless network of my Time Capsule when running OS X, which works absolutely fine. When running Windows 7 x64 in Boot Camp though, this network can't be found and I have to connect to my secondary 802.11g network of an AirPort Express. Even this network connection usually dies after a few minutes of intensive use though (copying files, playing online games; it's fine with low activity like web surfing). It still appears connected normally, but no data is being transmitted. I have to reset the wireless adapter to get it to work again. The same network works fine for any OS X device.
The Windows drivers for the Broadcom chip in this machine seem really flaky. Anybody else have these problems or maybe a solution?

Yes, sorry, the Boot Camp area would have been a better place to ask. After some more googling I found a helpful thread though, which led me to download this driver package:
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?swItem= ob-80585-1&lang=en&cc=us&idx=3&mode=4&
From it I installed the driver called "Broadcom 43225 802.11b/g/n", and presto, I can finally use my 802.11n network under Windows. Hope that's helping other people that may have this problem.

Boot Camp Windows 7 No Longer Connects to Internet

Hello, I have a mid 2011 iMac with Boot Camp Windows 7 installation. It has run flawlessly for more than a year. Recently however, I have been untable to connect to internet when running Windows. The connection works fine as a Mac. While in Windows, I can momentarily (about 10 seconds) connect by disconnecting and reconnecting the LAN cable. Then the "no internet." I have all the latest Boot Camp support software installed. All MAC and Windows software updates are installed. My network devices are configured correctly. I have rolled back to previous Windows updates with no resolution. Does anyone have any suggestions?

your router, your Windows firewall, you are using something other than Windows Defender (8) or Essentials (7), something else on the cable.
you had a storm and the modem is on life support and your ISP can login and see what errors the modem is showing, you don't have network surge protection (APC tend to interfere, Cyberpower tend to work).
What else is on the LAN?
I found Windows to be funny about network but 8 and 8.1 have never had trouble. With 7 I sometimes had to reboot.
Besides Apple and Windows, some drivers are or often still needed - manually.

Completely unable to boot camp windows 7 on Mac Pro

I am at the end of my rope. I have a Mac Pro 1,1 - 2.66 quad core, 7 gigs of ram. I have been trying over and over and over to Boot Camp Windows 7 onto a secondary hard drive. But every single time time, it hangs indefinitely or straight up freezes during "completing installation". I have scoured the interent for answers. I have tried typing shift+f10 when it hangs and typing in explorer.exe. This doesn't work. I have tried having all USB devices unplugged. I have moved the drive from bay 2 to bay 1 and having the other 2 drives empty. I have tried multiple discs. And from what I have found, the Mac Pro is completely unable to boot from a USB drive with the Windows 7 installer on it. WHAT DO I DO? Please help!

your mac pro like mine has older EFI firmware that does not support booting Windows 7 64-bit.
You will have to remove all other drives.
Before you do, reformat the drive you want ot use as Windows Master Boot Record and FAT32, then format the drive with Windows during install.
Get rid of whatever is on the drive now.
You will be limited to 1.9GB RAM
Windows 7 Home Premium supports just one cpu, you have two.
64-bit Windows requires UEFI which you don't have and would need to edit and modify the DVD (reburn after using Imgburn).
Easy method: do basic install on a PC and then put the drive in the Mac Pro.

Boot camp Windows xp SP2 wireless is extremly slow

boot camp Windows xp SP2 wireless is extremly slow or doesn't work at all. It shows connected on weird 270Mpbs good connection. Other PC and laptops work fine. They are on Linsys wireless N GB router.
I heard some people have problem with SP3, but I am on SP2. If I boot into MAC os, it works perfectly.
It's MacBook 13, just bought it last week. All drivers are updated.
Any suggestion?
Thanks

I tried what Snackyotter did with no success. I don't really use the Caps Lock Key, or the Option Key at boot, when I want to switch to Boot-Camp and Mac OS X I just change the Boot Disk in System Preferences & vise-versa. Thanks for trying to help though. This weekend I am returning my Apple Slim Wireless Keyboard at the Apple Store. I still have the original packaging and receipt, I bought it offline and received it a few days ago. If the return doesn't go as planned and I'm stuck with this keyboard I will keep this question labeled 'unanswered'. If the return does go well I will label it solved, there is no need really to keep this topic waving around when I no longer have the Apple Wireless Keyboard. I have never EVER even thought of returning an Apple product before, wish me luck. To Apple though I must say that I am disappointed that you have had many months to fix this simple issue since this keyboard came out, but have decided not to. I will try to keep you updated. Again Thank You for your kind support.
tmt345

HT201541 Mac mini Late 2014 Boot Camp Windows 7 sound issue

Hi,
I'm wondering if anyone can help me with my Mac mini (Late 2014) and Boot Camp (Windows 7). The problem I'm having is that there's no audio when I boot into Windows 7, though everything works fine under OS X. After installing Boot Camp and Windows, the audio worked perfectly up until yesterday, and now there's nothing. I've tried updating as well as uninstalling and reinstalling drivers, but this hasn't helped at all.
When I open Volume Mixer and Playback Devices, the sliders show that audio is playing, but I hear nothing - either from the built-in speaker or when I headphones.
The Device Status indicates that "This device is working properly" and that the drivers are up to date. Tthe following drivers are installed:
dmk.sys
HdAudio.sys
ksthunk.sys
portcls.sys
SysFxUI.dll
WMALFXGFXDSP.dll
Has anyone else encountered this issue, or does anyone have any tips on how I might fix this?

Is the volume Muted? The Mac has an Audio database of devices and volumes in NVRAM, so an SMC Reset or PRAM reset might help. Please see this link for appropriate keys Startup key combinations for Intel-based Macs - Apple Support.

Boot Camp / Windows Partion... Can it be installed on a separate hard drive

I am just beginning to explore the idea of installing Boot Camp & Windows on a new Intel Mac I will be buying. I've been reading a lot of references to the Windows partition...
Can I dedicate a separate hard drive to Windows rather than partition my primary hard drive? If so would it be best to use an internal drive rather than a Firewire or USB drive. What would a reasonable minimum drive size be?
Thanks for you feedback.
Mike

Hi Mike,
since only the Mac Pro can have more than one internal HD, I assume you are talking about getting one of them
With more than one internal HDs you can put Windows on the second, third, fourth internal HD with the BootCamp Assistant.
On a side note: Windows does not support to be booted from external HDs (neither FireWire nor USB).
Reasonable size depends on what you want to do with it.
Windows XP itself takes up to 3.5GB of HD space after installation, Vista takes up to 10GB.
Add to that the HD space you need for the programs and data you use/produce.
And when keeping in mind the hassle it takes to enlarge the Windows partition if needed, my personal suggestions are:
Windows XP at least 30GB, Vista at least 50GB.
Have you already had a look here http://www.apple.com/support/bootcamp/ especially at the Installation Guide ?
Regards
Stefan

How to acces my HFS+ pertition with snow leopard in boot camp windows

Ive recently installed Snow Leopard on my mac, I also have windows 7 installed in a boot camp partition, I wnt to know if the support for the HFS+ file system in boot camp 3.0 supports windows 7 or ist only for vista and XP, because I cant see my Mac OS X drive when I boot from windows.
Do I need to change something from boot camp or Mac OS or is it supposed to work with any interaction from the user?

you need to install the new bootcamp drivers from windows. boot into windows, insert the snow leopard DVD, open it and follow the instructions.

How do you switch iMac 27" display when in Boot Camp (Windows 7)?

Hello,
My 27" iMac works great as an external display as long as the iMac is booted into OS X and I hit command-F2.
When I boot my iMac into Boot Camp (Windows 7) however, hitting command-F2 doesn't work to use my iMac as an external display.
Is there any way to get the 27" iMac to enter external display mode if you have booted it into Windows 7 rather than OS X?
Thanks!

I have the same problem, 64bit Win7 Home Ed. loaded with all the recent updates including a Bootcamp patch from last week.
I posted on 9/2/10 and haven't gotten a reply. Did a lot of Google searching but only found it is a problem many have, but that no "real" solution is available.
Since I have had issues in Win7 after it crashes this way and after on/off (unlike you), I'm not willing to mess with it anymore.
I doubt Microsoft will commit to fixing this and it's not likely to be a top priority for Apple.

Remove Boot Camp Windows Partition

I would like to know how to remove the Boot Camp windows partion all together from my computer.

When I try to use the Boot Camp Assistant it does not give me the option of removing it.

Is Paragon's "HFS+ for Windows" safe to use in Boot Camp Windows &/or Parallel 8 Windows?

Is Paragon's "HFS+ for WIndows" safe to use for read+write access to HFS+ drives when running Windows [8] via Boot Camp?
Drivers that came with Apple Boot Camp (or maybe Parallels [8]) enable "read-only" access to HFS+ formatted drives from Boot Camped Windows, but I want to be able to write to the drives, too. I'm worrying about whether something in those Apple (or Parallels) drivers for Windows that makes that possible might also conflict with other software like "HFS+ for Windows," maybe even make a risk of corrupting the HFS+ disk (either external or even the OS X boot partition) so badly that everything on it becomes lost.
So I'm looking for people's experiences with using "HFS+ for Windows" with Parallels Desktop [8] for Mac. Is it safe?
Thanks.

Thanks, Templeton. Yes, within OS X using Parallels 8 the integration with the Windows Parallels virtual machine is great. But once I leave the OS X / Parallels environment the folder sharing access disappears. So when I Boot Camp to Windows I have no visibility into the OS X partition nor any external HFS+ drives. (Except for a few specific activities that can only be done in OS X or are best in OS X, I spend almost all my time in Windows, so I usually wouldn't run OS X or Parallels to Windows.)
Thanks GeekBoy. Paragon HFS sounds risky with Parallels. I'll be eager for more feedback about risks of using that combo from whomever can offer it.

Boot-camp/Windows 7 Network Help Needed

Similar Messages

Maybe you are looking for