Boot Camp Windows 7 x64 on an iMac

I've been trying to install Windows 7 Home Premium 64bit via boot camp on my iMac, formatted as NTFS. After I click start installation, it installs perfectly fine, but then afterwords, when the installer says it needs to restart the computer in order to continue, once it starts up, I get a black screen. I've found two possible solutions, but I'm not sure if either would work on my current iMac, or if there are any other solutions.
Solution 1: http://support.apple.com/kb/TS3173 (Doesn't list support for Mid 2010 27" but would it work?)
Solution 2: http://www.subodh.com/Blog/PostID/85/Installing-Windows-7-on-iMac-27-rdquo
Sorry if I'm wasting anyones time, I'm at school and just wondering what my best bet would be when I get home (Solution 2? If that works, I will be able to reinstall the ati drivers later, right? Thanks)
iMac Mid 2010 27" | Quad Core i7 | 2.8GHz | 8GB RAM | 1TB 7200RPM HDD | ATI Radeon HD 5750
Message was edited by: Evanjs
Message was edited by: Evanjs

Just an idea for you. There is an entire Apple Discussion forum dedicated to Boot Camp and Windows.
Whereas, not everyone here with an Intel iMac has installed, tried to install or has experience with BC & Windows, everyone there has or at least has an interest. You may attract help more quickly there.
The Forums are at the bottom of the main Apple Discussions page under Windows Compatible Technology. Here is a link;
Boot Camp: Installation and Storage
Dah•veed

Similar Messages

Wireless issues with MacBook Pro i5 in Boot Camp Windows 7 x64

I have a 2010 Macbook Pro i5 15''. I'm usually connecting to the 802.11n 5Ghz wireless network of my Time Capsule when running OS X, which works absolutely fine. When running Windows 7 x64 in Boot Camp though, this network can't be found and I have to connect to my secondary 802.11g network of an AirPort Express. Even this network connection usually dies after a few minutes of intensive use though (copying files, playing online games; it's fine with low activity like web surfing). It still appears connected normally, but no data is being transmitted. I have to reset the wireless adapter to get it to work again. The same network works fine for any OS X device.
The Windows drivers for the Broadcom chip in this machine seem really flaky. Anybody else have these problems or maybe a solution?

Yes, sorry, the Boot Camp area would have been a better place to ask. After some more googling I found a helpful thread though, which led me to download this driver package:
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?swItem= ob-80585-1&lang=en&cc=us&idx=3&mode=4&
From it I installed the driver called "Broadcom 43225 802.11b/g/n", and presto, I can finally use my 802.11n network under Windows. Hope that's helping other people that may have this problem.

How do you switch iMac 27" display when in Boot Camp (Windows 7)?

Hello,
My 27" iMac works great as an external display as long as the iMac is booted into OS X and I hit command-F2.
When I boot my iMac into Boot Camp (Windows 7) however, hitting command-F2 doesn't work to use my iMac as an external display.
Is there any way to get the 27" iMac to enter external display mode if you have booted it into Windows 7 rather than OS X?
Thanks!

I have the same problem, 64bit Win7 Home Ed. loaded with all the recent updates including a Bootcamp patch from last week.
I posted on 9/2/10 and haven't gotten a reply. Did a lot of Google searching but only found it is a problem many have, but that no "real" solution is available.
Since I have had issues in Win7 after it crashes this way and after on/off (unlike you), I'm not willing to mess with it anymore.
I doubt Microsoft will commit to fixing this and it's not likely to be a top priority for Apple.

Anyone successfully installed Windows 7 x64 Enterprise on iMac running OSX 10.9.3?

I am trying to install Windows 7 x64 Enterprise onto IMac (late 2013 model) that has Maverick OSX 10.9.3 installed. We have done this in the past, before upgrading to 2012R2, and using 10.9.2 OSX.
When I create the TS media using x64 WinPE, insert into the IMac and boot - the boot selection pulls up. I select the USB EFI boot (only one that loads and it starts running WinPE and pulling up the Task sequence selection. I think the issue
is with the partition table. Before installing Windows - I exit with F8, run diskpart, which shows 3 primary partitions. I add a 4th and format as NTFS. I now have 4 primary partitions - none that show as EFI. The TS starts, checks
requirements, and tried to download the preinstallation environment to the disk as the TS tells it to install to disk 0, part 4 with no formatting and fails with 0x8007000f.
If I use diskpart to clean the drive and boot with the USB to EFI, let SCCM select Bios or UEFI, it will detect to UEFI, download the PE environment and apply the OS. When it reboots, it does not recognize the hd, showing a flashing folder.
Any help or comments are appreciated.
Thanks
Zander.wheels

Hi,
I recommend you use Boot Camp to create partition.
Boot Camp is a multi boot utility included with Apple Inc.'s OS X that assists users in installing Microsoft Windows operating systems on Intel-based Macintosh computers.
http://en.wikipedia.org/wiki/Boot_Camp_(software)
http://support.apple.com/kb/HT3986
Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Please help with my Boot Camp/Windows problems

I need to install windows on to my iMac to continue a course I’m taking at uni. Sadly it’s been a nightmare so far.
I backed up all of my data and opened Boot Camp Assistant and tired to partition a section of my hard drive for windows. However it gave me an error each time I tired. After asking around I was told to buy idefrag and that should fix the problem - it didn’t. I was then told to format the hard disk and reinstall OSX. I did that and Boot Camp was now happy to partition my hard drive.
I insert a copy of legitimate copy of Windows 7 Professional (x64) and clicked the Install Windows button when Boot Camp prompted me to.
Windows installation menus open after a quick restart but quickly tells me it cant see any partitions/drives to install on.
I googled the problem read that the partition should be formatted to NTFS for windows seven to install and that OSX wont do that. I installed a free program called NTFS-3G and that formatted the partition to NTFS.
Windows now saw the drive and went through the installation process. After it has gone through its automated routine it restarts the Mac and takes me to a "Press any key to boot from CD or DVD..."
I press Enter and it takes me back to the very first installation menu and restarts the whole thing until it has once again gone through its automated routine and restarted the Mac and told me to press any key.
This happened ever time. During the install I am presented with the options of "Installing Windows" or "repairing windows". When I tried the automatic repair it told me it could find no fault.
So I started again by deleting the partition from within OSX and making a new one and installing windows and restarting but this time remove the windows 7 disk.
All this did was boot the Mac up in OSX. I then restarted the Mac and held down the options key. This presented me with the choice of booting from the Mac HDD or the windows partition. I chose the windows partition and it takes me to a black screen with a flashing line/prompt and does nothing else.
I assumed Windows 7 might not like my Mac for some strange reason so brought a copy of Vista business with SP2 (x86).
I deleting the partition from within OSX and made a new one. I began installing Vista. It told me it could only install on NTFS formatted partitions/drives.
Once again I used NTFS-3G to formatted the partition to NTFS and relaunced vista.
It installed fine and restarted itself. Once again it took me back to the first installation screen just as windows 7 did. I tried restarting without the disk (hold options again) and it took me back to the black screen with the flashing line and sat there forever.
I restarted the Mac with the OSX 10.6.1 install disk in the drive and it booted up ignoring the disk. I launched the disk from desk top and looked through the install options hoping to find some drivers or extra installs for boot camp/windows. I couldn’t see anything.
I don’t know what else to try.
I have a 21.5' iMac:
Model Name: iMac
Model Identifier: iMac10,1
Processor Name: Intel Core 2 Duo
Processor Speed: 3.06 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 3 MB
Memory: 4 GB
Bus Speed: 1.07 GHz
Boot ROM Version: IM101.00CC.B00
SMC Version (system): 1.52f9

Re-read in the PDF guide in Boot Camp Assist where it tells you to format the "BOOTCAMP" FAT volume when in Windows.
http://www.apple.com/support/bootcamp
But I have really only one question:
Was this an electronic school download edition? they offer students Windows 7 Pro. If this was an electronic version from school, fine, but it has to be burned at *reduced 2x speed* or it won't work, and can have various (and different for everyone) problems, BUT: it is pretty well known and semi "documented."
You do NOT need NTFS driver. That is totally wrong.
Sorry you bought Vista, I used it but once Windows 7 went Beta and then RC I've used 7 and never looked back (what Vista should/could have been but was not, even with SP2).

Boot Camp Windows 7 No Longer Connects to Internet

Hello, I have a mid 2011 iMac with Boot Camp Windows 7 installation. It has run flawlessly for more than a year. Recently however, I have been untable to connect to internet when running Windows. The connection works fine as a Mac. While in Windows, I can momentarily (about 10 seconds) connect by disconnecting and reconnecting the LAN cable. Then the "no internet." I have all the latest Boot Camp support software installed. All MAC and Windows software updates are installed. My network devices are configured correctly. I have rolled back to previous Windows updates with no resolution. Does anyone have any suggestions?

your router, your Windows firewall, you are using something other than Windows Defender (8) or Essentials (7), something else on the cable.
you had a storm and the modem is on life support and your ISP can login and see what errors the modem is showing, you don't have network surge protection (APC tend to interfere, Cyberpower tend to work).
What else is on the LAN?
I found Windows to be funny about network but 8 and 8.1 have never had trouble. With 7 I sometimes had to reboot.
Besides Apple and Windows, some drivers are or often still needed - manually.

Boot Camp 5.1 not working with iMac late 2013 3 TB

I tried to use Boot Camp 5.1 on my new iMac with 3TB FD. I bought a Win 8.1 OEM DVD with key.
I followed the instructions of Boot Camp (deselcted the first step with ISO because I have the DVD). When it comes to the windows installation I can't select the BOOTCAMP partition because of the used GPT-style.
I thought this problem was fixed with OS X 10.9 and Boot Camp 5.1.
Do you have any ideas?

From MacBook Pro (13-inch, Mid 2010) - Technical Specifications, you have a built-in Optical drive. Is it functional?
Storage
250GB or 320GB 5400-rpm Serial ATA hard drive; optional 320GB or 500GB 5400-rpm hard drive, or 128GB, 256GB, or 512GB solid-state drive6
8x slot-loading SuperDrive (DVD±R DL/DVD±RW/CD-RW)
Maximum write: 8x DVD-R, DVD+R; 4x DVD-R DL (double layer), DVD+R DL (double layer), DVD-RW, DVD+RW; 24x CD-R; 10x CD-RW
Maximum read: 8x DVD-R, DVD+R, DVD-ROM; 6x DVD-ROM (double layer DVD-9), DVD-R DL (double layer), DVD+R DL (double layer), DVD-RW, DVD+RW; 24x CD
You will need to burn a DVD using Disk Utility (Yosemite): Burn a disk image to a CD or DVD and use it for Windows installation. You will also need a USB2 flash disk for the BC drivers for it to work. Please ensure that the DVD is burnt at the recommend rate for the physical media and verify, otherwise you will end up with an unusable DVD.

How do i install boot camp on a brand new 3tb iMac osx 10.8.2

how do i install boot camp on a brand new 3tb iMac osx 10.8.2?

Note: At this time BootCamp doesn't support 3TB drives - this is due to a memory allocation issue with Windows. Check out this article on a/an (unreliable) work around. I say unreliable because some people are reporting success and others failure. At this time if you really need Windows it probably would be better to use virtualization software like Parallels, VMWare, or VirtualBox.

HT201541 Mac mini Late 2014 Boot Camp Windows 7 sound issue

Hi,
I'm wondering if anyone can help me with my Mac mini (Late 2014) and Boot Camp (Windows 7). The problem I'm having is that there's no audio when I boot into Windows 7, though everything works fine under OS X. After installing Boot Camp and Windows, the audio worked perfectly up until yesterday, and now there's nothing. I've tried updating as well as uninstalling and reinstalling drivers, but this hasn't helped at all.
When I open Volume Mixer and Playback Devices, the sliders show that audio is playing, but I hear nothing - either from the built-in speaker or when I headphones.
The Device Status indicates that "This device is working properly" and that the drivers are up to date. Tthe following drivers are installed:
dmk.sys
HdAudio.sys
ksthunk.sys
portcls.sys
SysFxUI.dll
WMALFXGFXDSP.dll
Has anyone else encountered this issue, or does anyone have any tips on how I might fix this?

Is the volume Muted? The Mac has an Audio database of devices and volumes in NVRAM, so an SMC Reset or PRAM reset might help. Please see this link for appropriate keys Startup key combinations for Intel-based Macs - Apple Support.

Boot Camp / Windows Partion... Can it be installed on a separate hard drive

I am just beginning to explore the idea of installing Boot Camp & Windows on a new Intel Mac I will be buying. I've been reading a lot of references to the Windows partition...
Can I dedicate a separate hard drive to Windows rather than partition my primary hard drive? If so would it be best to use an internal drive rather than a Firewire or USB drive. What would a reasonable minimum drive size be?
Thanks for you feedback.
Mike

Hi Mike,
since only the Mac Pro can have more than one internal HD, I assume you are talking about getting one of them
With more than one internal HDs you can put Windows on the second, third, fourth internal HD with the BootCamp Assistant.
On a side note: Windows does not support to be booted from external HDs (neither FireWire nor USB).
Reasonable size depends on what you want to do with it.
Windows XP itself takes up to 3.5GB of HD space after installation, Vista takes up to 10GB.
Add to that the HD space you need for the programs and data you use/produce.
And when keeping in mind the hassle it takes to enlarge the Windows partition if needed, my personal suggestions are:
Windows XP at least 30GB, Vista at least 50GB.
Have you already had a look here http://www.apple.com/support/bootcamp/ especially at the Installation Guide ?
Regards
Stefan

Remove Boot Camp Windows Partition

I would like to know how to remove the Boot Camp windows partion all together from my computer.

When I try to use the Boot Camp Assistant it does not give me the option of removing it.

Is Paragon's "HFS+ for Windows" safe to use in Boot Camp Windows &/or Parallel 8 Windows?

Is Paragon's "HFS+ for WIndows" safe to use for read+write access to HFS+ drives when running Windows [8] via Boot Camp?
Drivers that came with Apple Boot Camp (or maybe Parallels [8]) enable "read-only" access to HFS+ formatted drives from Boot Camped Windows, but I want to be able to write to the drives, too. I'm worrying about whether something in those Apple (or Parallels) drivers for Windows that makes that possible might also conflict with other software like "HFS+ for Windows," maybe even make a risk of corrupting the HFS+ disk (either external or even the OS X boot partition) so badly that everything on it becomes lost.
So I'm looking for people's experiences with using "HFS+ for Windows" with Parallels Desktop [8] for Mac. Is it safe?
Thanks.

Thanks, Templeton. Yes, within OS X using Parallels 8 the integration with the Windows Parallels virtual machine is great. But once I leave the OS X / Parallels environment the folder sharing access disappears. So when I Boot Camp to Windows I have no visibility into the OS X partition nor any external HFS+ drives. (Except for a few specific activities that can only be done in OS X or are best in OS X, I spend almost all my time in Windows, so I usually wouldn't run OS X or Parallels to Windows.)
Thanks GeekBoy. Paragon HFS sounds risky with Parallels. I'll be eager for more feedback about risks of using that combo from whomever can offer it.

210-4125 will not boot when windows 7 x64 is installed

i have posted this problem a while ago "210-4125 will not boot when windows 7 x64 is installed"
hoping that some one new might have had the same problem
HP.......................................HP MINI PC 210-4125
model ................................210-4125
Bios ...................................F08
ser no................................ [edited Serial Number by Moderator]
product no.........................A8V56EA#ABU
Ram ..................................4.0 GB
system board ID............... 338d
processor .........................Atom(TM) CPU N2800 1.86GHz
Product configuration ID..0797200000204600000300100
acording to INTEL the cpu is X64 bit, but the bios will not let a X64 boot up only a x32 bit ?
and i get a message on black screen "you are trying to load an opperating system not compatable" or some thing like that
it would seem that the bios is the problem and not the CPU ? the 08 bios update only covers x32 bit and not x64
if any one out there is running x64 bit windows 7 on the 210-400 range of netbook can you tel me
1. model no
2.CPU
3.Ram installed
4 bios No
thank you
JB

thank you George
i will bear that in mind next time
i see that you work for HP ? do you have any suggestion's for my problem ?
as i mentioned before the notebook works faultlessly when X64 windows 7 is installed via the OEM disk in the external DVD drive , but if i disconnect the DVD drive it will not boot, but gets stuck in boot loop , then if i connect the drive with any windows installation disc loaded in it , it loads perfect and works perfect even if i disconnect when loaded , but i can not keep the drive connected ?
i have tried to use a USB flash drive to install X64 windows 7 but it comes back that the present CPU is not compatible ??
when it clearly states on Intel web site that it is and it works perfect when loaded ?? even the Windows update manager confirms that it will run all X64 windows OS
i understand the the bios "InsydeH20" is a very difficult bios to work with, and that Insyde have blocked the "hidden menu" via software ? i have exhausted all the software functions to open the complete bios that i can find at the moment , i think it is locked out from out side the bios and not from inside.?
any pointers in the right direction would be very helpful ,
many thanks
John

Boot camp, windows xp and macbook pro-install problem

MacBook Pro 1,1
Mac OS X 10.6.8
Boot Camp Windows XP
I installed a SSD and want to put Windows XP back on the computer.
I had Windows XP running under Boot Camp on my old HDD.
During the Windows XP install when it tells you to
press ENTER to install Windows XP
press R to repair a Windows install
press F3 to exit
I can't get the install to accept any input from the keyboard.
I tried searching the discussions but I'm not finding the answer.
I'm sure it is just something simple I'm not doing. I had Windows XP
running on this MacBook Pro before.
Thanks

I wonder if your XP works with SSD or some SSDs have had trouble with Windows on Macs...
I'd search out PC forums + brand SSD for starters users with XP.
Everyone I run across though have moved on to Windows 7 64-bit.

Boot camp window inactive except for docking. cannot continue.what's up?

boot camp window is inactive except for docking. cannot continue..anyone know what's up?

What is docking?

Boot Camp Windows 7 x64 on an iMac

Similar Messages

Maybe you are looking for