Boot DVD does not appear in list on Option Restart

Greetings - I am attempting to run Stellar Partition Manager to adjust two partitions on my SSD drive.  I have setup a dual boot configuration where 10.6.8 as well as 10.7.2 reside on that SSD drive in two separate partitions.  To adjust the partitions I must restart the workstation from a Boot DVD created using that software, however after restarting while holding down the Option Key, the DVD disc does not appear as one of the choices in the bootable drives list.  I believe the DVD drive is functioning properly as I routinely use it to read and write discs, including loading software.  I have reset the PRAM, but that has had no affect.  So far I have not received knowledgable support from Stellar, and have kind of gotten the run-around.  I am hoping I can independently work around this issue.  Thanks for any thoughts.   Scott

Hi Larry,
According to your description, my understanding is that the Edit web part option disappeared in the list web part.
I recommend to check if the account has permission to edit the web part, please check the permission of the account in Site Permissions and the list permissions.
Please also check if the target audience is set in the web part.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Similar Messages

  • DVD does not appear

    My CD/DVD does not appear in Mac not in Win7 running under Virtual machine? Anyway ideas how to troubleshoot and diagnose the problem.

    Look in the preferences for your Virtual Machine. If that doesn't work then refer to the forums for the Virtual Software you're using.
    Roger

  • Epson DX5000 driver does not appear on list in'print using' box

    Epson DX5000 driver does not appear in list despite the fact that I have downloaded the software.
    When the printer is connected and I try and print I first go to 'add printer' in the print dialogue window. This takes me to the printer browser where the Epson DX5000 appears - at this starge I can't add as this option is not highlighted. Instead I have to go to 'print using' where I click on Epson - this is where the problems start as the DX is not on the very long list.

    Hi Ali
    Yes I have installed the software
    I have been using another printer so I realise that I don't need to add printer each time - this is the first time using this new printer
    After I 'add printer' I am taken to the printer browser where the RX5000 is listed (this is in the default browser mode) when I then click the RX5000 the name and location appear in the appropriate boxes but I am unable to press the 'add' button. I have to go to more printers where I then go on to look in the epson folder.
    this is where I get stuck as my printer is not listed

  • Silverfast scanner does not appear in list of available scanners in 'import'

    silverfast scanner does not appear in list of available devices in 'import' (elements 12)

    First of all, have you installed the TWAIN driver?
    TWAIN not installed | Photoshop Elements 9 and later

  • Your does not appear to me the option of Upgrade existing installation

    Your does not appear to me the option of Upgrade existing installation to a clustered installation
    I am installing sap 4,7 ext: 110 in cluster formed with Windows 2003 enterprise and SQL enterprise 2000, the manual of sap says to me that it installs SQL of local way in the node a of cluster, later mind to install service pack 3 in the node a, later mind to install sap in the node a, after that requests to me that realise upgrade of SQL with the Upgrade option existing installation to a clustered installation but that option does not appear to me qualified

    Here is a short (not necessarily complete) list of Cluster Option Requirements
    - The SQL Server binaries are installed on a local non-
      shared drive (Only Node A).
    - The disc for the database files and the log file are
      belongs to the SQL Server Cluster Group (MSSQL).
    - On node B is no SQL Server with the same name (named
      instance name or default instance name ) installed.
      Check the registry on node B for the branches
      HLM\SOFTWARE\Microsoft\Microsoft SQL Server
       and
      HLM\SOFTWARE\Microsoft\MSSQLServer
      Deinstall the SQL Server on node B, if it exists and
      delete the registry branches on node B, if they still
      exists.
    - The executing user for the setup has appropriate
      rights on both nodes
      (domain administrator).
    - The SQL Server database files (master, msdb, etc.) are
      on a shared disc.
    - Node B is available via private and/or public net.
    - The Cluster service is running on node A and on node B.
    - You are using the right CD (not mat.number 51011908)
      or have set the version by means of the .reg file
      sqlverfix.reg (see node 377430).
    - All needed discs (SQL DB, SQL Log, Quorum) are on
      node A.
    Please check all the requirements and run the cluster upgrade of SQL Server again.
    Best regards
      Clas

  • Yahoo toolbar appeared without my consent. Can't get rid of it. Does not appear in list of add-ons or in list of programs installed for uninstall. (Win7; FFx5) Please help me delete this annoyance.)

    I was prompted to update Java. I got a YAHOO toolbar which I did and do not want. I can't get rid of it. It does not appear on the Add-on list, not in the programs list (to uninstall). Can't find anything with Yahoo in the name. I do not want to use View, because it keeps coming back into view without my consent -- I want it gone permanently.
    The uninstall directions in Yahoo help call for click on pencil tool (which tool is not found on this toolbar). Firefox instructions say go to Add-on list, but the Yahoo bar is not there. There are several Java add-ons, but I don't know what they are and what happens if they are uninstalled.
    Win 7; Firefox 5.0; Yahoo toolbar ver 2.3.8.20110620112826
    Perhaps it is disguised as something else. If so please tell me what to uninstall.

    Try RIGHT clicking on different areas of the toolbars on Firefox, mainly try right clicking on/around the url bar & forward/back navigation buttons. When you get the correct spot if will give you a menu with the toolbars available (whether or not they're active) and a couple other options. Just uncheck the Yahoo one & you should be all set.
    As you say though it may be some other bar disguised as a yahoo bar. Any chance you can get a screen shot of it & post it here?

  • Substitutions - field does not appear in list of 'substitutable fields'

    Specifically, I would like to use a exit substitution to replace the content of the Structure PRPS-POSID field.
    However, I cannot seem to use a simple substitution rule (since PRPS-POSID does not appear as a substitutable field in the PRPS list of fields that pops up when creating a 'Step').  Most of the PRPS field are availed as 'substitutable fields' but not POSID.
    The user exit approach is proving difficult since I cannot add the following code unless I put in a data or tables statement (which is NOT recommended).
    If proj-PSPID(7)  <> prps-POSID(7) .
      prps-posiD(7) = PROJ-PSPID(7) .
    ENDIF.
    Please help!

    Hello Shrikant;
    The requirement is to ensure that the WBS element numbering (prps-posid(7) ) will always match that of the Project Definition (proj-pspid(7) ).  This numbering rule is required to comply with the Fund Centre numbering since the fund center number utilizes the Project Definition number as an identifier ( I will email you some screen prints).
    If there is a discrepency between the WBS element numbering (prps-posid(7) ) and the Project Definition (proj-pspid(7) ) number, the requirement is to assign Project Definition (proj-pspid(7) to the WBS element numbering (prps-posid(7) .  The transaction used to call the substitution exit is CJ20N.
    A big thanks for your comments so far.
    Peter Forster.

  • Purchased ringtone does not appear in list in settings/sounds/ringtones

    Hi I bought a ringtone on my iphone today and I can see it in the purchased downloads, and I can see on my MacBook after sync, but it does not appear in the list of ringtones on my iPhone, so I can't set it as my default. Can anyone tell me how I find this purchased ringtone and set it as my default ring?

    I pressed the itunes icon on my iphone, up came the title screen, and one of the offerings on it was "Ringtones RCP Ringtones 1.0" you either buy the full library of the tones for $3.99 or just one for .99, which is what I did, I found the one I wanted (it sounds like a British telephone with that double ring-ring) and hit the buy button. It asked for my iTunes password which I gave, and then it downloaded. In other words, exactly like any other itunes song does.
    Now it's sitting on my iphone in the downloads file. When I couldn't get it to appear in the settings/sounds/ringtones section so I could choose it, I thought maybe I should do a sync with my itunes on my computer, so I did that, making sure that "sync ringtones" was checked. Now there is a new file on my computer itunes called "Purchased on [my name]'s iPhone" however there is nothing in the ringtones folder on the computer itunes, and I've tried dragging it out of that purchased folder into the library and into the ringtones folder and it won't go in.
    I can play it on my phone, and I can play it on my computer. it appears like any other song on itunes. but I can't make it become the ringtone on my phone!

  • App does not appear in list of apps to sync

    Help!  I downloaded an app that is in the genre of Education.  When I click on the device (iPod Touch), this app does not appear in the list of apps that I can select with a checkmark in order to sync from iTunes to the iPod.  Also, when I display the apps in my iTunes library, the app is on the list, but I cannot drag it to the device.  I can add other apps (games, etc) to this device using either of these procedures (syncing or dragging).

    Is the app compatible with your model iPod?

  • IPhone  does not appear in list of devices in iTunes in the cloud

    my iPhone does not appear in the list of devices

    Hi, cdv2007. 
    Here are some helpful troubleshooting steps I would recommend going through when your device is not recognized on a Mac. 
    Note: This article is for Mac OS X users. If you're using a Windows PC, please refer to these troubleshooting suggestions.
    Follow these steps to resolve your issue:
    Ensure that your Mac meets the minimum system requirements for your iPhone, iPad, or iPod touch.
    Install software updates on your Mac.
    Note: If an iTunes update is available, apply the update.
    Check USB connections. iOS devices require USB 2.0 to function properly. If you're not sure your Mac has USB 2.0 ports, refer to the computer's specifications.
    Disconnect other USB devices and connect your device directly to a USB port on your Mac.
    Restart your Mac.
    iOS: Device not recognized in iTunes for Mac OS X
    http://support.apple.com/kb/TS1591
    If you are experiencing the issue on Mac OS X 10.6, try the steps in the article below. 
    Mac OS X v10.6: iOS device not recognized in iTunes after restart
    http://support.apple.com/kb/TS3540
    Cheers,
    Jason H. 

  • Cannot sync app to my ipod touch - does not appear in list to sync

    Hello...
    I am having a problem. I downloaded an app to my ITunes, but when I click on my ipod touch and go to Apps, it does not appear in the list.
    I don't know if this contributed to the problem, but I had to create a different user account (the one I am using now) to get the None option to show up instead of having to enter a credit card to get a free app.
    The app I am trying to get is See. Touch. Learn. by Brain Parade.
    Kim

    Thank you so much! what a swift reply - I am amazed! but my main problem is trying to transfer an app bought in iTunes to my desktop Mac. I thought 'seeing' the iPod in Devices would make it easier, but I am stuck... Can you help?

  • Airport BaseStation's name does not appear in list of workgroup's members

    I have a windows workgroup called NUCFAM with two PCs running XP Pro in it.
    I have replaced my linksys router with an Airport Extreme Base Station to which I have attached two printers and a disk. I have configured the AEBS to have the Airport Extreme name "celery" and I have configured the AEBS to be in the workgroup NUCFAM by using the Airport Utility>Disks>File Sharing panel.
    On Windows, where I have installed BonJour, each of my printers is listed as located at celery in the printer's properties.
    However, in Windows Explore>Tools>Map Network Drive if I click the Browse button
    a dialog appears that lists, under a node labeled NUCFAM, the names of my two PCs but not the name of the AEBS, i.e. celery. Instead the AEBS is named by the same twelve hex digits that Airport Utility lists as its Ethernet ID.
    And in a CMD shell
    net view \ \celery
    fails to find the network path. However,
    net use \ \10.0.1.1
    does find the AEBS and lists the disk's name.
    Can I get the AEBS to appear on the Windows side with the AEBS's name?
    Thanks.

    I just found the answer on the discussion board.
    In my SETTINGS I had compilations turned on.
    When I switched it off, Carly Simon was back in my
    ARTISTS list.

  • Cant change tap to click settings because boot camp does not appear in the drive or task bar.

    Late 2008 macbook pro 8Gb ram 750Gb HDD 2.8Ghz intel duo-core with OSX 10.9 (partition with Windows 7 ultamate)
    I am experiancing a whole host of issues with installing windows on my mac, frst of all the genuine product key that I bought directly from microsoft does not work. Also my trackpad is partially broken so I can only tap to click which means that I have to use my external trackpad to use the computer in windows 7. Therefore I have tried to set windows 7 to tap to click but could not find the way to change that and the fourms said I could change it throuh the Bootcamp settings but bootcamp doesent appear anywhere in the search field and the icon is missing from the task bar and so is the arrow for showing hidden icons. As it is I can't get anywhere with this machine. Will someone please help me!

    下げ髪 wrote:
    Bootcamp told me the windows support software was no longer avalable from Apple's servers. If I manage to get it from apple independently, do I download it from the windows side or the mac side of my drive partition?
    Read the Boot Camp install guides. http://www.apple.com/support/bootcamp/

  • Artworks does not appear in List and Grid view, but in Cover Flow

    Since a few days the Artwork does neither appear in the List and the Grid View nor in the Genius Mix. When I change to Cover Flow, I can see all Artwork. I see all Artwork also in the information tabs. I already upgraded to the last iTunes version 9.0.2 but without any effect. Restarting iTunes and my PC doesn't help at as well.
    Does anybody have an idea what the problem is and how it can be solved?

    Hi, welcome to Apple Discussions.
    A completely blank Cover Flow can sometimes be a graphics driver problem but if Grid & List views have problems then it is probably a corrupted artwork cache. With iTunes closed rename the *Album Artwork* folder as *Album Artwork (OLD)*. Start iTunes and slowly scroll through your library in Grid mode. The cache will be rebuilt for all albums where there is embedded art. Albums that only had iTunes Store art will need to have new artwork downloaded. If all goes well delete the old artwork folder.
    *How to find tracks without artwork*
    To find all the tracks without artwork so that you can update them you can try http://www.stum.de/itunes-find-tracks-without-artwork/ for Windows or http://dougscripts.com/itunes/scripts/ss.php?sp=trackswithoutartwork for Macs. Use Google, Amazon, Discogs etc. to locate relevant images. Ideally these should be square, 320x320 pixels or above and borderless to give the best results in the various menus.
    tt2

  • Airport Connection- Network does not appear in list

    I've searched through the topics and haven't seen anything exactly like my issue, but some close.
    I've been ignoring this mainly due to not having the time to research, but have spent all day today to no avail.
    I have a D-Link DI-514 router, my iMac is connected by ethernet, my Macbook via airport, both without issue.
    My iMac however will not connect via Airport, the airport is on, but the network does not show up, in-fact no network does. However my Macbook sees 6 networks (neighbors) including mine.
    The router is within a few feet of the iMac, I have moved it to various locations, still no network. I have duplicated all system preferences from the Macbook to the iMac, including Network, Sharing and Security settings.
    I have booted into safe mode and back, still no network.
    I began to think there must be a problem with the airport card, or an interference problem, so I booted into XP and successfully connected to my network with an "Excellent" signal, so the card works and there is no interference.
    I downloaded iStumbler, on both the imac and macbook, istumbler sees no networks on the iMac, the Macbook sees 6, including mine, which it sees at 72% with 8% noise.
    I've done this with both an Open Network and a WEP encrypted.
    Any other ideas?
    Thanks
    Porl

    The latest update fixed this for me!
    Cheers!

Maybe you are looking for