Boot error with question mark on folder icon

Hello.
This is very newest iMac (2014 late).
It worked very first time with basic way.
But 3 days later, iMac doesn't boot at all.
I've tried everything about reinstall and boot
Internet recovery, P+R+Alt+Cmd, recheck and verify hard drive.
However, sometimes There's no show hard drive on disk utility mode.
Can't even erase or format because I don't see it on hard drive list.
And now after power on, there's only [question mark on folder icon] and
it looks like warning me something.
Should I refund it? Or try something else?

Hi
Given Solution
1st check Hard Disk Working or Not
2nd check Partition table
3rd check reinstall Mac Os
and
after any problem vist ; [email protected]

Similar Messages

Folder with Question Mark, to Apple Icon, to Kernel Screen at Startup.

At startup Folder with Question Mark, Followed all steps to resolve it to no avail, I try to re-install Snow Leopard and Apple Icon with Grey screen appears, then Kernel screen.
I cannot get past the Kernel screen. No options to click anything, like system preferences or anything. I have a Macbook, with Snow Leopard. Any help would be much appreciated.
I tried Pram Reset and everything.

Hey, thanks for the quick reply Mende.
I tried that, it goes to the apple icon, however after about 10 seconds of the apple it goes straight to the Kernel screen. It doesn't give me the options of opening anything. Infact it doesn't even have a mouse curser.
If I hold "option" it gives me the option of choosing only the "Leopard DVD" but that's it and then it goes to the Kernel Screen
Again, thanks for the taking the time to help me out.

Flashing Question Mark on Folder Icon on Startup: Not Yet Fatal

I running into a potential problem with my White, 13" MacBook. I'm running 10.5.6 (upgraded from 10.4).
I recently bought a new, larger capacity hard drive. I used the Applications "SuperDuper" to clone my existing drive onto the new drive. My computer runs (as far as I can tell) the same as it always did. However, whenever I startup the computer, it briefly flashes the dreaded "giant folder with a blinking question mark". However, this is quickly replaced with the Apple Logo, and the computer boots normally.
I have repaired permissions, and verified the disk using disk utility. The disk verified with a message along the lines of "The disk appears to be ok".
While my computer's working now, I'm concerned there might be a deeper problem, and I'd like to catch it before it becomes critical. Also, if this is something standard that happens when you replace a hard drive with a new one, I'd like to know that as well so I can stop worrying.
If your answer is "put your old drive back in", pretend I did that and am still seeing the problem. What now?
Possible data point, I opened the console and saw the following two lines right before the "got boot device" line
4/29/09 5:00:07 PM kernel Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
4/29/09 5:00:07 PM kernel AppleYukon2: 532111ab,00000000 sk98osx_dnet - CheckDictionaryEntry failed, expected vs. dictionary
Thanks in advance for your help.

Open Startup Disk preferences, select your startup volume from icon list, click on the Restart button.

File folder with question mark, file folder with question mark

Battery died went to turn on computer with adapter plug...
white screen with flashin file folder with a question mark???
How do i fix this?

That folder with the question mark icon means that the MacBook can't find the boot directory. That can either mean it can't find the hard drive or the Operating System data on the hard drive is somehow corrupted.
Put your install DVD into the optical drive (CD/DVD drive) and reboot. Be sure to either use the disc that came with your Mac, or, if you installed a later Mac OS X version from disc, use the newer disc. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option Key until the Install Disk shows up) until the apple shows up. That will force your MacBook to boot from the install DVD in the optical drive.
Or if you are running 10.7 Lion, boot from the recovery partition (Command +R on boot) and use Disk Utility to repair your OS 10.7 partition.
When it does start up, you'll see a panel asking you to choose your language. Choose your language and press the Return key on your keyboard once. It will then present you with an Installation window. Completely ignore this window and click on Utilities in the top menu and scroll down to Disk Utility and click it. When it comes up is your Hard Drive in the list on the left?
If it is, then click on the Mac OS partition of your hard drive in the left hand list. Then select the First Aid Tab and run Repair Disk. The Repair Disk button won't be available until you've clicked on the Mac OS partition on your hard drive. If that repairs any problems run it again until the green OK appears and then run Repair Permissions. After repairing use Startup Disk from the same menu to choose your hard drive for restarting from your hard drive.
If your hard drive isn’t recognized in Disk Utility then your hard drive is probably dead.

Booting Error: Flashing Question Mark

I was working with iWeb today and then it beachballed like crazy... So I force quit but then that beachballed too. So I just forced a shut down. Let it rest. Turned it back on and then it came up in gray screen. Then with the OS 9 smiley logo and the folder with a flashing question mark. I followed all those steps, did the disk utility, it said it found an error with the Tree Nodes so it repaired them fine. Then I tried to restart, still nothing. I tried the Startup Manager, all it found was the CD, no hard drive... I tried PRAM. I tried it all. I am very annoyed and now frustrated that all my work on iWeb and all my files are going to have to go bye bye if I have to do an Erase and Complete REinstall. Does anyone think that my computer can be "Target Mode" mounted on my other comp. and I can drag the important files over? Help!
PS. even tried, lifting the keyboard latches and pressed the reset button.
Nada...

To save myself time, I'm going to try to answer both your recent posts in this single post:
1. You wrote: "There are two hard drives on the left column of the Disk Utility... "If we're talking about your PowerBook herre, then I think you are confusing hard drives with volumes on hard drives. Let's clarify that first:
In case you do not understand the difference between hard drives and volumes on hard drives, here's an example illustrating the difference (note that a similar example is shown as a screen shot in my previously cited "Resolving Disk, Permission, and Cache Corruption" FAQ):
In the column on the left in Disk Utility, you might see something like this:<pre>38.2 GB IBM-DTLA-307045
Macintosh HD</pre>The first line ("38.2 GB..." whatever) is the disk, the actual hard drive itself, aka the device.
The second, indented line (Macintosh HD) would be your Mac OS X startup disk, aka your boot volume.
Volumes — partitions on a disk — appear indented below the disk on which they reside in Disk Utility.
In Disk Utility, you can select either a volume or a hard drive for verification or repair of either the disk or permissions. However, Repair Permissions can only be used on volumes on which Mac OS X is installed. If you select a drive (vs. a volume) and use Repair Disk on such, it will attempt to repair all volumes (partitions) on that drive.
If your LaCie FireWire drive is not connected and what you are seeing is akin to<pre>xx.xx GB FUJITSU...
No Name item you described</pre>Where the "No Name" item is indented and directly below the Fujitsu line, I suspect that No Name line should read "Macintosh HD" and, as a result of either directory corruption or disk damage, not even the name of the volume can be read.
2. Now, as to the specific errors you are citing: the "Invalid B Tree error" will require "stronger medicine" than Disk Utility. See the "Disk Utility cannot repair the disk" section of my — again — previously cited "Resolving Disk, Permission, and Cache Corruption" FAQ.
3. You wrote: "Will the Archive and Install erase my iWeb files, my iCal files, my TextEdit documents? I need those the most. "If you read my previously-cited "General advice on performing an Archive and Install" FAQ, then you would know that — assuming you follow the steps in the FAQ — that none of your personal data would be lost by performing an Archive and Install. I post links to my FAQs presuming you will read them thoroughly.
However, if the Fujitsu hard drive is the only drive in the affected Mac — and if this problem is with your PowerBook you should only have one drive installed inside the computer — then you cannot perform an Archive and Instal at this time as the directory on the drive is corrupted. The "Invalid B Tree" errors must to be fixed before you attempt to perform an Archive and Install on that drive. Furthermore, it is possible that the directory corruption could have damaged some of your personal files, but you won't know that until you repair the directory, if possible.
4. Later you wrote: "I went to the Apple store at the local mall. The "genius" took a look at my Powerbook and told me that my Logic board has malfunctioned and that it would cost me $400 to fix it."That's entirely possible given the errors you described and the fact that the drive could not be seen even in Target Disk mode. You may have a combination of problems, i.e. bad logic board which also lead to the corrupted drive directory. If the logic board problem is intermittent, one pass of the Apple Hardware Test might not catch it. Running the hardware test in Loop Mode overnight, again as stated in my previously-cited "Apple Hardware Test" FAQ is a good way to check for intermittent problems.
I don't regard the price you were quoted as unreasonable for a new logic board, and certainly cheaper than a new Mac. You may be able to shop around for a lower price, but then there's the time vs. money tradeoff in doing so.
I can neither confirm nor deny as to if the advice given at the "Genius Bar" was correct: they were able to examine your computer, whereas I can only provide advise based on what you report.
5. Then you wrote: "is there a way for me to take out my hard drive and put it in a G5 or another computer or ext. HD that way I can transfer all my data? Any suggestions?"Yes. You will probably find instructions for removing the hard drive on the Apple Do-It-Yourself Parts & Service page. You will need to know the specific model of your PB G4 15-Inch Titanium. The AppleCare Knowledge Base document "PowerBook G4 Computers: How to Identify Different Models" can help you identify the specific model of PowerBook G4 you have. Knowing the processor type in your PowerBook would also help.
You'd also need a FireWire enclosure for the type of drive in your PowerBook, again assuming that's the computer in question here (you mentioned a G5). AFAIK, most laptops have 2.5" hard drives vs. the 3.5" drives normally found in desktops: those are the dimensions of the platters within the drive, not the drive itself. Based on what I read here, which I believe would apply to your Mac, you'd probably need a FireWire enclosure for a 2.5" drive such as shown here. You should confirm that before purchasing an enclosure: I don't have a PowerBook.
I've bought both FireWire drives and enclosures from OWC and have always been pleased with their products. Assuming a 2.5-inch enclosure is correct, I'd recommend one of their "On The Go" products.
However, you're still going to be faced with the issue of attempting to repair the directory on the drive, as discussed in point 2 above. If the directory cannot be repaired, then you are going to have to resort to data recovery options, as discussed in my "Data Recovery" FAQ.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X
Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
I may receive some form of compensation, financial or otherwise, from my recommendation or link.

Blinking question mark/file folder icon on start-up

I cannot boot up my laptop--It makes the chime sound, then goes to a gray screen, then eventually an icon of a file folder with a flashing question mark superimposed on it appears. I've tried resetting the PRAM, and won't have access to the software installation CDs until I'm back at my office tomorrow.
Any ideas?

I also have the blinking folder. I tried starting up in safe mode but still just ended up with the folder. I used the install disc 1(pushing the c)and my hd doesn't show up to even repair it. I have tried everything else listed here and in the manual except reinstalling because I am afraid of losing all of my data, etc. When it is turning on it makes a weird clunking noise that has never happened before, along with the clicking that someone else had referred to.
Is there anything else I can do? My macbook is just barely beyond the one year mark. What causes things like this? I also now live outside of the US so I can't take it in to the Genius bar. What should our next steps be?
Thanks!
Kristina

Flashing question mark and folder icon

Hi
I got the dreaded flashing folder/question mark icon a couple of days ago I used a friends computer to read the information in these forums and eventually managed to get my iMac to start up again. I have a very recent Time Machine back up, so am not worried about losing anything. During the numerous re-start attempts I decided to **** with it and do a re-install of the software, but the HD icon wasn't showing up as an option. If thats what I have to do then so be it.
A lot of the posts talked about a Apple Hardware test, which involves a re-start. If I do that I am afraid that I wont be able to start again
Any suggestions about what my best move would be?
Thanks in advance
By the way, what causes this to happens? Is it a hard or soft ware issue?
Message was edited by: Tony Hague

It sounds like you may have an intermittent issue with that hard drive. I would get it replaced--especially if it's under warranty.
Dave M.
Check out the new remodeled MacOSG website! 24-hour Apple-related news & support.
 MacOSG: An Apple User Group  iTunes: MacOSG Podcast  Follow us on Twitter: MacOSG

Grey screen with question mark on folder?

Just turned on my MacBook and it opened up with a grey screen with a folder in the middle with a question mark, what does this mean? I am also hearing a clicking sound from inside the computer.

frederic, with due respect: this solution is good if the disk is good, if the disk is dying, therefore ? is not due to a corrupt system, but a dying disk, then this solution may impede later recovery of data, which is still possible, if need be and if the disk is not entirely dead. Usually they do not not die over night.

Export to Web and Q error with Question Mark

I've Exported to Web a video with Quick Time 7.6 and embedded it to my web page.
I tried to play it and I get a big Q with a question mark...
I enabled the "Show legacy codecs" on the plug-in and it worked..
So my question is how can I change my Export to Web Settings so it uses the right codec so my users don't have to change that setting.
The files QuickTime exports are:
video.mov
video-Desktop.m4v
video-iPhone.m4v
video-iPhone-cell.3gp
video-poster.jpg
ReadMe.html
Thanks in advance.
Regards,
Adrian

Here is what I could get:
.mov File:
File Type: QuickTime (.MOV)
Mime Type: video/quicktime
Desktop.m4v File:
M4VH: <unknown>
- M4A : Apple iTunes AAC-LC (.M4A) Audio
- mp42: MP4 v2 [ISO 14496-14]
- isom: MP4 Base Media v1 [IS0 14496-12:2003]
Recommended Display Size: 480 x 320
Created: 2009 Feb 17 20:54:52
Modified: 2009 Feb 17 21:14:03
iPhone.m4v File:
M4VP: <unknown>
- M4A : Apple iTunes AAC-LC (.M4A) Audio
- mp42: MP4 v2 [ISO 14496-14]
- isom: MP4 Base Media v1 [IS0 14496-12:2003]
Recommended Display Size: 480 x 320
Created: 2009 Feb 17 20:59:22
Modified: 2009 Feb 17 21:16:40
iPhone-cell.3gp File:
3gp6: 3GPP Media (.3GP) Release 6 Basic Profile
- isom: MP4 Base Media v1 [IS0 14496-12:2003]
- avc1: MP4 Base w/ AVC ext [ISO 14496-12:2005]
- mp42: MP4 v2 [ISO 14496-14]
Recommended Display Size: 176 x 117
Created: 2009 Feb 17 20:27:29
Modified: 2009 Feb 17 20:30:42
Regards,
Adrian

Booting system from an external drive; Folder with Question Mark

Hello all. I am trying to setup an external USB hard drive as a bootable device for my Tiger install. This is on a Core Duo Mac Mini. I have successfully partitioned it using GUID into two partitions; A small 5gb partition for the minimal OSX install, and the remainder for data. I installed OSX onto it via my included Tiger discs that came with the Mini, no problems. However, when I try to boot from it I get a Folder icon with a question mark in the center. I can boot the Mini normally and browse the external partition. It shows no problems. Disk Utility also shows no errors on the drive. What have I missed?
For any who are curious, my goal here is to use NetRestore to make a backup image of my main Mini hard disk. Then by booting to the external USB drive, I will be able to restore the backup image (stored on the data partition of the external drive as well) to the internal Mini hard disk.
Mac Mini Core Dio Mac OS X (10.4.7)

Just letting everyone know that I am still unresolved on this one. I have tried it all; Zero-overwrite erased the external drive before partitioning it, used Carbon Copy Cloner to clone the boot disk, you name it. Every situation leads to the same result; no ability to boot from the USB drive, It just acts like it can't read it. Are there "undocumented" problems booting from USB on Intel macs?

Flashing folder icons with question mark

After reading through the forums I've found a few discussions and users that have similar problems as me but haven't seen anything that deals directly with my issues.
After upgrading to Leopard last night, it ran sluggishly for about 15 minutes. I got impatient and decided to restart. While trying to restart it froze, so I just shut my powerbook down. When I tried to boot back up I got the "flashing folder icons with question mark", I've since found out that it isn't finding any type of drive to boot off of. I reset the pram, tried to reboot with the same result. Tried to boot up using cmd-s but still got nothing but flashing folders. Booted up from the Leopard install disc to try and do an archive and install and it said it couldn't upgrade because it couldn't find tiger on my machine. So I booted from the Tiger install discs to try and re-install tiger again. Tiger cant find my HD to install on; I'm thinking this may be due to Leopards install. I ran disk utility and it couldn't complete the verifying process. I got this "Error: The underlying task reported failure on exit."
After work I'm going to try to boot up in target mode to pull any data i can and try erase my HD and install from there.
To me it seems like a HD issue. Anyone have any thoughts?
Thanks in advanced.
-Chance

Chank wrote:
After reading through the forums I've found a few discussions and users that have similar problems as me but haven't seen anything that deals directly with my issues.
After upgrading to Leopard last night, it ran sluggishly for about 15 minutes. I got impatient and decided to restart.
The "sluggishness" is perfectly normal. It's well-known and it is not an issue.
You should have waited for spotlight to finish indexing.
You may have broken some links by forcing a shutdown while things were still being setup.
Which install method did you use, upgrade, archive or erase?

Hi . i have Intel based iMac. i erased whole hard disk. now it flashes folder icon with question mark... i have no internet or orginal dvd.... i want to clean install any mac osx..friend got mac book pro and osx in dmg format . what are my options?

hi . i have Intel based iMac. i erased whole hard disk. now it flashes folder icon with question mark... i have no internet or orginal dvd.... i want to clean install any mac osx..friend got mac book pro and osx in dmg format . what are my options?

On your friend's computer with an internet connection, log into the Mac App Store with your ID and download Yosemite from the Purchases section of the Mac App Store. The make a bootable USB install media using
http://liondiskmaker.com/
Then boot from that on your computer and install
You need an internet connection to install via Recovery mode

15" MacbWhite screen with a blinking file folder icon with a question mark on it.

15" Macbook. When i power on all I get is white screen with a blinking file folder icon with a question mark on it.N

You may have a bad hard drive. The flashing folder with the ? indicates that the system cannot find your hard drive. Use the installation disc that came with your machine. Insert it into the disc drive and restart the machine holding down the "C" key . When the restart shows the Apple screen you can release the C keyWhen the installation screen appears, click on the utilities button. Does the left side of the disc utilities screen show your HD? If not, then your HD is bad or it could be a loose connection. ifixit.com has a good tutorial on how to replace the HF in the Macbook. Follow the instructions to remove your HD. Reinstall your HD and boot up your machine to see if it recognizes your HD. If it does't, you probably will need to replace your HD>
Is your machine still under warranty? If so, take it to your nearest Apple Store for repairs as the repairs will be covered under your warranty. If you bought AppleCare when you bought your computer your warranty is for three years. If you didn't buy the Apple Care, then your warranty is only good for one year from the date of purchase.

Folder with Question Mark on Boot

I can't get my mac to boot. Instead I get the gray screen and a folder with question mark icon. I'm guessing the HD is dead? Any chance for recovery? If not how much does a new one cost? The one year warranty just expired!
Please help!
Thanks,
Brian

So, what is it? The thing froze today and wont reboot - just a gray screen with NOTHING. Then after about 10 min. the flashing question mark folder appears.
So, I popped in the install DVD that came with the computer, get the little gray Apple logo and it boots from the DVD.
Launch Disc Utility. The HD appears on the left. Click on it - all of the "Verify" and "Repair" buttons remain grayed out. So what the hxll do I do?
I cant boot into single-user mode or any other mode for that matter.
This is a Macbook pro, dual-core Intel, less than a year old.

MacBook won't start - shows flashing folder icon with question mark

When I attempted a Spotlight search, my MacBook froze. I shut it down, and when I start again I get the sound, the blue screen, and then a flashing folder icon with a question mark. I tried starting with Option pressed down; didn't work, and now I don't even get the flashing folder icon, just the blue screen. Any suggestions?

The flashing folder with question mark means the computer can't find a working OS on the computer. This may mean your hard drive has failed.
Try holding the Shift key while starting up the machine. This puts the machine into Safe Mode.
If you have your install discs, insert Install Disc 1 and start up the computer while holding down the C key. When the Installer has loaded, choose a language. From the Utilities menu, choose *Disk Utility*. Does your hard drive show up here? If so, click on its icon (the one with manufacturer name & capacity, NOT "Macintosh HD"), and then click on the *Repair Disk* button.
If booting in Safe mode doesn't help or you don't have your install discs, you need to bring the computer to an Apple store and have the folks there look. If Disk Utility doesn't list your hard drive, it has very likely failed and will need to be replaced. If your machine is out of warranty, you're better off replacing it yourself, as it's very easy to do.
~Lyssa

Boot error with question mark on folder icon

Similar Messages

Maybe you are looking for