Boot Up Error 0xc0000034 - windows failed to start

I came back from work yesterday and found my laptop displaying a black screen saying that "windows failed to start. A recent hardware or software change might be the cause" and to repair using the windows 7 installation disc.
However windows was pre-installed on my machine so i dont have a disc. I left it on during the day so i can only assume it restarted due to an auto update.
I only got this computer the other day and i really dont need this hassle.
Any ideas??
Ta

> However windows was pre-installed on my machine so i dont have a disc.
You didnt receive any disks because there was preinstalled software called Toshiba Recovery Disk creator.
This allows you to create recovery disk which would help to restore the OS.
But usually there should be a HDD recovery option too.
Try this:
Press F8, choose Repair my Computer, HDD recovery.
If this will not help, then you will need the recovery disk. You can order this here:
https://backupmedia.toshiba.eu/landing.aspx

Similar Messages

Satellite C660D froze and does not start - Windows failed to start

Ok pretty much the most dense person you will ever likely to meet when it comes to things like this. but will try my best to explain.
Couple of days ago my laptop froze on me resulting on me having to turn it off and start it again by the power button. When I started it again the message below appeared.
WINDOWS ERROR RECOVERY
Windows failed to start . A recent hardware or software change might be the cause.
If windows files have been damaged or configured in incorrectly, start up repair can help and diagnose the problem, if power was interrupted during start up, choose start windows normally.
-Launch Start up repair (recommended)
-Start windows normally
When I press Launch Start up repair it goes to a screen with a big cursor (which you can move around) but nothing else happens.
When I pressed on the start windows normally setting it went through to the windows logo whilst starting up but then stalls at this point.
My question is, is it easy to fix & if not where is the best place to take it to get fixed. Said I was pretty dense :p
Thanks for looking
Dean

>My question is, is it easy to fix & if not where is the best place to take it to get fixed. Said I was pretty dense
I think its easy to fix but you would need an Toshiba Recovery disk.
Did you create one in the past?
If not, try to start the HDD recovery: power up the unit, press F8. Now choose Repair my Computer.
Now new Window should open and here you should choose Toshiba HDD recovery option. This would set the notebook back to factory settings.
In case this isnt possible, you would need to boot from a recovery disk to reinstall the system.

F11 Recovery don`t work - error Windows failed to start

After downloading MS updates don`t work administrator password. I try F11 Recovery and see black screen: windows failed to start. A recent hardware or software change might be the cause ...
File: \windows\system32\winload.efi
status: 0x0000001
Info: The application or operating system couldn't be loaded because a required is missing or contains errors.
?Any ideas?
This question was solved.
View Solution.

1) Maybe I misunderstood something, but I thought that the function f11 restores preinstalled Windows from the hidden partition on the disk.
2) I created a boot disk with Windows 8 Pro on USB and tried to boot from it through Boot manager. Beyond the first installation screen did not go.
3) As for your advice to contact the dealer, so I did yesterday. The tablet was taken away for examination by 20 days...
It's very sad, it was a gift to my father for Christmas.
I work for a long time as the system administrator and am dealing with HP servers. It is a pity that such a reputable company can not provide the quality of their tablets.
I advised my daughter Windows tablet, but she wished to have iPad. Now I see that she was right - a year she has no problems with it. Windows tablet - this is not the best choice for a child or an old man.

Windows failed to start error

Windows failed to start error
I am running a Compaq mini 110c netbook and the following error message occurred on start up. The netbook does not have a slot for a disc as everything was in the netbook already. I am a complete technophobe and need help to restart my netbook.
windows failed to start. A recent hardware or software change might be the cause. To fix the problem:
1. Insert your Windows instalation disc and restart your computer.
2. Choose your language settings, and then click "Next."
3. Click "Repair your computer."
Status: 0xc000014c
File: \Boot \ BCD
Status: 0xc000014c
Info: An error occurred while attempting to read the boot configuration data.
Help please!!! Answers must be in plain everyday language that I can understand!!!

The following 2 links should help with the issues you are having. I would suggest attempting a system restore first (not I repeat not a system recovery) make sure you are doing the restore option or you will lose everything.
Click the option to "Using System Restore when Windows 7 cannot start normally"
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01835735&lc=en&cc=us&dlc=en
The below link is for other basic troubleshooting that might help if the above doesn't work:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01443371&cc=ad&dlc=en&lc=en&jumpid=reg_r1002_us...
Hopefully the steps are basic enough for you to understand and help out. Thanks
I am an HP employee.
Please post rather than sending a Private Message. It's good for the community and I might not be able to get back quickly.- Thank you.
Please click the White Kudos star on the left to say thanks.
Please mark Accept As Solution if this resolves your issue.

After restore windows boot manager says windows failed to start. CQ57 notebook

Had a problem with the FBI scareware. Took it to a cmputer repair place. They wanted $250 to fix it and now it won't boot up at all. It did the HP system restore but when it rebooted the Windows Boot Manager says "Windows failed to start". It wants an installation disc. THen :
File: \Boot\BCD
Status: 0xc000000f
Info: An error occurred while attempting to read the boot configuration data.
Is it trying to boot from the wrong partition?

Enter BIOS setup by tapping/holding the F10 key immediately after powering on the laptop.Use Diagnostics to test your hdd.
If you haven't burned a Recovery Disk set, phone HP to order one.Usually around $17. Choose your country here>> Contact HP
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Error saying that windows failed to start 0xc000014c on my toshiba satellite A210

On my Laptop, a Toshiba A210, I get an error saying that windows failed to start. File:\boot\bcd status: 0xc000014c. i already put in a windows recovery disc and it still came up with this message. I removed the HDD and restarted the laptop, and it brang up windows install but it cancels that out before the install starts, even if i stick the HDD in after start-up.
Can anyone help me with this issue please?

Which A210? Which Windows? Which service-pack level?
Maybe you are resuming from hibernation? Press and hold the power-on button until the computer shuts off to get out of this state.
Maybe you have Windows Vista?
Error message when you resume a Windows Vista Service Pack 1-based or Windows Server 2008-based comp...
-Jerry

How to fix "0xc000000e:Windows Failed to start" boot

I have pavillion g6, with message above. Start up tests all passed. t
When computer turn on, black scren "Windows Error Recovery"
Launch startup rlation disc..repair - fails
Start Windows Normally = sends to windows boot manager, with message in subject to insert installation disc
I downloaded iso. Does not work please help

Hi Bwald,
Thank you for visiting the HP Support Forums and Welcome. I have read your thread on your HP Pavilion g6 Notebook and getting a Windows Failed to start. Try performing a hard reset. When performing a hard reset please note remove any and all USB devices, and remove memory cards from the card reader slot. Disconnect all non-essential devices. You could try a system restore. Here is a link on what to do when System Restore fails. If that does not help you will need to return the BIOS to factory defaults. In this document it gives you a step by step to resolve the boot device error.
Hope this helps.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Satellite L300-19F doesn't boot up - Windows failed to start

My notebook doesn't start up, "Windows failed to start. To fix the problem: restart with recovery CD".
I may do this, but first I do want to try to save data (and pics) from hard disk.
Is it possible, for example, to go to DOS during start up with recovery CD, and copy data to USB-stick?
By the way, all my data is on E:\ partition. Will this be overwritten when installing from recovery?
Please advise. Regards.

> Is it possible, for example, to go to DOS during start up with recovery CD, and copy data to USB-stick?
No, this is not possible!
If you would boot up using recovery disk then the recover procedure would be started and the whole HDD would be formatted!
You can try to boot using an WinPE
http://www.livecd.com/
This will allows you to boot up the unit and to get access to the data on the HDD
You could also built own Windows live CD
Check this:
http://www.makeuseof.com/tag/how-to-create-your-own-custom-windows-live-cd/

Windows failed to start, please insert windows disk

Hello,
I have a HP envy 17 3d,
When I turn my laptop on it says the following.
Windows failed to start, a recent hardware or software change might be the problem.
\Boot\BCD
0XC/000000f
An error occurred whilst trying to read the boot configuration data.
I don't have a windows disk but a computer repair guy is bringing one over later. I just wanted to make sure I know everything I need to know, I want to avoid loosing any data!
Thank you
Erin

The BCD store can be recovered by someone who knows what they are doing.
If you have a usb HP recovery flash drive you can access Windows startup repair.
There is aslo a utility called EasyBCD that will allow you to repair an issue like this easily as well.
BTW it always helps if you state which operating system is installed. That way we can be on the same page. Since the error is BCD then I already know that it is a Windows & or Windows 8 (.1) OS, but it helps us to know for certain.
The tutorial on the following web page shows what the computer guy is likely to do to resolve the issue if your notebook has a MBR formatted disk.
http://think-like-a-computer.com/2012/04/17/boot-bcd-0xc000000f-windows-7/
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Windows failed to start. Required device inaccessible.

Windows failed to start. A recent hardware or software change could be the cause. The boot selection failed because a required device is inaccessible . Both hard disk and memory test passed. Please let me know what can be done. I think it's battery issue because it says battery problem but even if I remove the battery it's not going to windows home screen. Also tried I'm safe mode, did not work.

Hi @San16,
Welcome to the HP Forums!
It is a great place to find answers and tips!
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
I grasp that when you start your notebook you are seeing " The boot selection failed because a required device is inaccessible"
Here is a link to HP Notebook PCs - Resolve Boot Device Not Found Error Message (Windows 8, 7). As you have already tested the hard drive and memory you can omit that step.
If a recovery should be required, you will have an opportunity to backup your personal files to prevent data loss during that process. The link for the recovery process is in the document provided.
Here is a link to HP PCs - Restoring Files that were Backed Up Using HP Recovery Manager (Windows 7) should it be needed.
Best of Luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Windows Failed To Start

Hi,
I own a Lenovo Ideacentre All-in-one A700. OS is Windows 7 64 Bit. Recently I did a bluetooth software update which got stuck in between and I restarted the system. Ever since that, I get a message from Windows Boot Manager saying "Windows failed to start. A recent hardware or software change might be the cause.
To fix the problem:
1. Insert your Windows installation disc and restart the computer.
2. Choose your language settings and click next.
3. Click "repair your computer"
Status: 0xc000000f
Info: The boot selection failed because a required device is inaccessible.
I do not have the OS CD nor have I created the system restore disks. What I do have is the backup of all my data in drive D. Now, when I contacted lenovo through e-mail, they asked me to use One Key Recovery (OKR) and repair my system. I tried using that but then when I tried to take the backup of my files I get a message saying "The Image file is not valid." I did a bit of research in lenovo forums and found out that those whose OKR version is older than 7 face this issue. I checked up my OKR version and found it to be 3.
Here is the link : http://consumersupport.lenovo.com/hk/en/HintsandTips/hints_show_13263616724030.html
I have tried all the other options to load my OS including safe mode, safe mode with command prompt and last known good configuration but it comes back to the same screen. I am also unable to update my OKR to the latest version. I have a lot of important files located in my system. Now, can someone please help/guide me as to what I should do in order to use the backup created already in D drive and restore my system.
Thanks for all the Help !!

Well sorry to say this, but if you look that error up in Microsoft or a internet search it means the HDD is bad.
The only thing I can recommend is to try and take the HDD out and pull the Data from another PC or boot Linux and see if you can copy your Data that way.
Hopefully you can still save your data.
Good luck.
IT Specialist and Consultant
Lenovo Tablet Evangelist
Current Machines: IdeaCentre A300, ThinkPad Tablet, IdeaPad U410, and Yoga 3 Pro Touch
Deutsche Community Comunidad en Español
Lenovo - the latest in DOtabs, DOpads, DOcentre's, DOstations and DOservers!

Windows failed to start: Insert Windows installtion disk?

Satellite A205-S5843
Windows Update the night before. Next day, the browser was stalling. Eventually Task Manager reported Web Site Browser was not running. I closed down all programs and hit Restart. At the restart all that came on was a small image like when an image is loading. It continued for 20 minutes. None of the buttons would do anything, not even the power button or escape button. I finally unplugged the machine. Now when I turn on the power, I get the following message...
=============
Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:
1. Insert your Windows installation disk and restart your computer.
2. Choose language settings. Click next.
3. Click "Repair your computer"
file: \Boot\BCD
Status: 0xc0000001
Info: An error occurred whi;e attempting to read the boot configuration data.
============
Things I have tried:
Disks. I do not have the Windows disk. The recovery disk I made and filed when I purchased the machine gave the same error.
Various button combinations. F8 key + power button. 0 (zero) key + power button. F2 and F12 are the only buttons I can access. I tried Reset to Defaults. Same results on power start.
Any feedback would be appreciated.
Solved!
Go to Solution.

Recovering to the factory default setup, and rebuilding from there, while not always necessary, is still a good thing every now and then, especially if your system has become quite messed up or corrupted.
I am glad you were able to work it out with your Toshiba Recovery disks. In double checking your specs, it would seem your system never came with the Recovery Partition on your hard drive. Otherwise, there would have been the Toshiba Recovery Media Creator program listed on your pre-installed software, which it is not. So, keep those Recovery Disks safe, and maybe think of making disk copies of each to have a spare.
See these instructions to aid in the upgrade to Windows 7, if any problems persist try the Toshiba Windows 7 Software Installer
How to upgrade to Windows 7 with the Toshiba Upgrade Assistant
Toshiba tools to simplify the Windows 7 installation process (Toshiba Upgrade Assistant for Win7 and Toshiba Win7 Software Installer)
You are very welcome. And, thank you for letting us know what worked. We very much appreicate it when people get back to us, as most do not.
Let us know how it all turns out. Good luck.
Mike

Windows failed to start on Satellite L510

Hi :)
I am not very tech savvy, I have only had my laptop a month. And yesterday when I turned it back on I got this message....
Windows failed to start. A recent hardware or software change might be the cause. To fix the problem: Insert your windows installation disc and restart your computer
If you do not have this disc, contact your system administration or computer manufacturer for assistance.
file: \boot\bcd
status: 0x000000f
info: an error occurred while attempting to read the boot configuration
I have been all over these forums and the internet searching for a solution but no luck. It is the weekend so I cannot contact the service line.
I would appreciate a step by step process of whatever it is I need to download or reboot. I do not have the windows installation disc as it did not come with my laptop.
I really do appreciate your help in advance ;)

Hi
Well, the error message says everything for me. Insert the Windows disk *or* contact the manufacture (Toshiba). ;)
By the way: It would be interesting to know if you can boot in safe mode. Check this!!
If yes you could start the HDD recovery. Therefore select Repair my Computer in advanced boot menu and follow the screen instructions.
Yes, with the notebook didnt come a disk but you can create one!!!
Please read the user manual always first.
Now its too late to create such a disk but you can order a new one from Toshiba directly:
https://backupmedia.toshiba.eu/landing.aspx

Windows failed to start. A recent hardware of software change might be the cause.

Hello,
Last night when I was finished using it for the day I went ahead and shut it down. Prior to shutting it down it was working perfectly fine. When I went to boot it up this morning, I kept getting the error that windows was unable to start normally and it took me to startup repair multiple times. I don't have the operating system disk (Windows 7) anymore I'm not sure if my computer just didn't come with a windows 7 disk. All I know is that I don't have it anymore. I tried basically everything I could find on the internet that was supposed to help with it and nothing works. I tried going into safe mode and using the command prompt, still nothing. It's now just showing up with a screen saying "Windows failed to start. A recent hardware of software change might be the cause. But like I said, this comes as a problem seeing as though I don't have my windows disc. I would really like to now if there is a way to fix this problem. I am requesting your help to fix this issue.

try to download and burn a copy of win7 from forums.MyDigitalLife.info
match your version and bits of windows
then run repair / Startup Repair 3x off the win7 dvd without letting it try to start into windows. rebuilds your partition tables and fixes a lot of things.
if that doesnt get you into windows... read up and run SFC /offwindir /offbootdir from the win7 dvd
you dont say much what you've tried .. i assume you tried from the F8 menu / startup repair / an older system restore date ?
You need the windows7 dvd !!!

L655 Windows failed to start up

Have the satellite L655 Laptop and i get this. Windows failed to start up. A recent hardware or software change might be the cause. To fix the problem: 1. Insert your windows installation disc and restart your computer. 2.choose your language settings and then click next. 3.click "repair your computer." If you do not have this disc, contact your system administrator or computer manufacturer for assistance. File: \windows\ststem32\winload.exe Status: 0xc000000f Info: The selected entry could not be loaded because the application is missing or corrupt. I ordered the disk from Toshiba windows 7 I have a boot disk that I created it will boot from that disk but not the recovery disk from them, but the computer does not load the CD. F1 and F8 do not work only F2 and F12

Can't tell from that which discs you have. You should boot to the Windows Recovery Environment.
   What are the system recovery options in Windows 7?
Try things in this order.
   Startup Repair
   System Restore
   At the command prompt, run this.
      chkdsk c: /r
Always tell us which Satellite L655 you have. There is a label on the bottom.
-Jerry

Boot Up Error 0xc0000034 - windows failed to start

Similar Messages

Maybe you are looking for