Bootcamp don't support AHCI,SSD can't be full speed...

bootcamp don't support AHCI,SSD can't be full speed...

Why do you need to use AHCI? If you have a SATA III compatible Mac, Boot Camp should run just fine with any 6Gps drive on the market - at full speeds.
Clinton

Similar Messages

  • Bootcamp don`t support my 64 bit file

    Hello
    I have downloaded a windows home premium 64 bit iso, but bootcamp don`t accept my iso with the error that bootcamp don`t support a 32 bit iso file although I have a 64 bit version.
    thanks for answers

    Are you sure your Mac supports 64 bit?
    http://support.apple.com/kb/HT1846
    If it does, I'll ask a moderator move this thread to the Boot Camp forum, where more people might know why it isn't working.

  • Can't get full speed out of Comcast Blast (16/2) when connected to AEBS

    I just moved into to a new townhouse that I had prewired with Cat 6 and have subscribed to Comcast Blast service. (No Fios here.) When I connect my Mac directly to the modem, I can get download speeds as high as 16-17 Mbps and upload speeds around 1.5 Mbps at times. However, when I try to connect through my home network (modem > AEBS > Gbit switch > Mac), I'm lucky to get > 4Mbps down and about 1.5 Mbps up. (Download speed is obviously more of a concern.) The AEBS is running v7.2.1 and I confirmed through Network Utility that I'm connected to my network at 1Gb. Any suggestions?
    Thanks in advance,
    Paul

    Hey Paul:
    Okay.
    This should NOT be happening. Something is obviously awry here. Try checking the cable that is used to connect your Comcast Modem to your Airport Base Station. It may / may not be the problem. Usually however Comcast does not supply high quality patch cords and they're not anywhere near the cat 5 or 5e spec. Forget about Cat 6 being given away by them.
    So go buy a handful of patch cords that are spec'd at cat 6. (And get ready to pay thru the nose for them!) Use these to replace all the connections from the Cable Modem to the AEBS and from the AEBS to your Gigabyte Switch. You can get a reading that says you're connecting at gigabyte speeds but if your cables won't run it, then you do not get the throughput that you're looking for. Remember you are going through multiple ethernet ports here (cable modem to AEBS to Switch to Computers.
    Also, do you have your Gigabyte capable devices on the GB switch ONLY? No 10/100 printers or computers with slower ethernet ports connected to THAT switch? I know they say 10/100/1000 but generally that's total BS. You'll find that isolating the slower speed devices/computers onto their own switch/hub makes a huge difference. A NON-Gigabyte ethernet device (just like a non-N Wireless device) mixed into the same network can slow down the who network. The solution is to put the slower stuff on a little 8 port powered 10/100 switch of it's own with a Gigabyte UpStream connection to your GB switch. That way the slower devices don't slow your entire network down to a crawl. Don't forget to use a CAT 6 Cable from the GB Switch to the 10/100 switch with a GB Upstream port. Yes. It matter that much. The faster the network goes the less forgiving it becomes.
    Also, you said you had the house wired for CAT 6. Did the installers use CAT 6 certified Jacks, Cable, Connectors? Lots of really lousy electricians will charge you for CAT6 and then use the cheaper connectors and jacks. You've got the right cable. But nothing else. And the whole thing is NOT going to work at the maximum speeds until the hardware is all CAT6 and installed correctly.
    I paid over $30k to wire the office for CAT 6 and POE for the phones. The contractor used the cheaper cat 5 jacks and connectors. They didn't even terminate the connectors properly. Cost me a fortune in trouble shooting to find the problem and more money/time to correct it. When I took the first guy to court for breach of contract and fraud he said "I didn't know that CAT6 required special jacks and connectors and cable terminations." The judge agreed with me that as an electrical contractor charging that kind of money - he should have known and supplied what he specified. Not what was handy and cheaper. I got my money back. And court costs. And he got fined an additional $50k for the fraud and misrepresentation. So find out what your contractors actually installed. I'd almost bet that somewhere along the way, you're back to cat 5 or cat 3 and don't even know it.
    Good luck!
    Isn't data communications FUN?
    Let me know what you discover!
    M in LA

  • 2011 MacBook Pro, 64 bit i7 quad core, upgraded to Lion OSx, Bootcamp installed with Windows 7, wanting to install Windows 8 (don't ask), tried downloading/installing bootcamp 5.0.5033, error message something similar to bootcamp doesn't support this Win

    2011 MacBook Pro, 64 bit i7 quad core, upgraded to Lion OSx, Bootcamp installed with Windows 7, wanting to install Windows 8 (don't ask), tried downloading/installing bootcamp 5.0.5033 (both on the mac/windows partitions (actually using a parallel to run Windows)), error message something similar to bootcamp doesn't support this Windows
    So the question is am I doing something wrong? Should I just try and install windows 8 through my windows 7 partition and see if I can use the bootcamp 5.05033. Or do I solely have to use the bootcamp to install Windows 8? I'm not too familiar with bootcamp and how it runs.

    if you're using parallels and full bootcamp then you're making it 100% more troublesome for youself then it needs to be
    bootcamp is running windows directly on the hardware this give full memory and cpu and 3d video game power
    running windows in parallels is running a virtual machine where one can't run powerful games and the like but one can have it in a window and change fast between osx and windows
    parallels as the only virutal machine (as far as I know) support not have the operating system as a file on the osx harddisk but can access a bootcamp parition as virtual machine but without the benefits bootcamps provides
    it's a service parallels provide for those who want both to play games in normal bootcamp and sometimes use windows in a virutal machine
    just install it like a normal virtual machine and you need not worry about bootcamp drivers and the likes
    plus it would mean that the windows part would be a part of the timemachine bacup of osx
    which it is not when it's in bootcamp

  • I recently upgraded to Yosemite 10.10.2 and Aperture 2.1.4 will no longer open.  I cannot access my photos and I don't want to pay for latest version of Aperture since this application is no longer going to be supported.  How can I get my pictures?

    I recently upgraded to Yosemite 10.10.2 and Aperture 2.1.4 will no longer open.  I cannot access my photos and I don't want to pay for latest version of Aperture since this application is no longer going to be supported.  How can I get my pictures?

    If you want just the originals, then you can go into the Aperture library (right click on it and do "show package contents"). Inside is a directory called "Masters" and you can find the original files in a bunch of subfolders.
    But... you'll lose all adjustments, keywords, and other information, and just have the files as they were imported originally from the cameras.
    Easiest is probably to buy Aperture and update everything, and then migrate to the Photos application down the road if that's what you want. Aperture 3.0 came out in 2010 (five years ago!) so it's not like you've upgraded in a while

  • Pages software in 10.8.3 does not support work done on microsoft office 2004.  Pop us says "You can't open the application "Mircosoft Excel" because Power PC applications are no longer supported.  What can I do now?

    Pages software in 10.8.3 does not support previous work done on microsoft office 2004.  Pop up says   --  You can't open the application "Mircosoft Excel" because Power PC applications are no longer supported.  What can I do now?

    Use Numbers, OpenOffice, LibreOffice, Microsoft Office 2008 or newer, Google Docs, or similar tools to open the files.
    (85829)

  • HT4718 No 1.    I can not activate Filevault : FileVault can't be turned on for the disk "Macintosh HD". Some disk formats don't support the recovery partition required by encryption. To use encryption, reinstall this version of Mac OS X on a reformatted

    I have TWO PROBLEMS
    No 1.  I can not activate FileVault. It displyas as follows :
    FileVault can’t be turned on for the disk “Macintosh HD”.
    Some disk formats don’t support the recovery partition required by encryption. To use encryption, reinstall this version of Mac OS X on a reformatted disk.
    No 2. I can not activate Find My Mac service. It displays as follows :
    Find My Mac requires a recovery partition
    Some configurations, such as software or hardware RAID, do not support a recovery partition and can't be used with find my mac

    Restart holding down the option/alt key and see if you have a Recovery Volume.
    Recovery Partition – Recreate Without Reinstalling
    Recovery Partition – Recreate Without Reinstalling (Requires Installer)
    Recovery Drive – Restore Missing
    Recovery Disk Assistant

  • HT1689 "Contact iTunes support before you can make a in-game (in-app) purchased buy again.. Solutions? Don't have time to wait for iTunes support to fix this =p

    As the thread says.
    "Contact iTunes support before you can make a in-game (in-app) purchased buy again.. Solutions? Don't have time to wait for iTunes support to fix this =p

    You need to do as requested

  • HT201328 I got this MSG that this sim is not supported then I can't do anything. I don't have any icons on my phone and I can't restore thru iTunes.  Anyone has similar experience? What do u do? AT&T told me my phone is unlocked but I can't do anything ne

    When i got on itunes after i was told my  iphone4 is unlocked.  I got this MSG that this sim is not supported then I can't do anything. I don't have any icons on my phone and I can't restore thru iTunes.  Anyone has similar experience? What do u do? AT&T told me my phone is unlocked but I can't do anything need help. My sim is with TMobile.

    You'll need to  either a) insert your AT&T SIM card and then restore the phone, or b) force your iPhone into recovery mode.  If you re-insert the AT&T SIM card, make sure you swap it with your new T-Mobile one before you start the setup assistant.  If you force the phone into recovery mode then just leave the T-Mobile SIM card in it.
    You must restore your iPhone to complete the setup assistant so that your phone can be activated with T-Mobile.
    Unable to update or restore: http://support.apple.com/kb/HT1808

  • Why can't I play games on my iPad, it says my device don't support the systen

    Why can't I play games on my I-pad? When I go to pogo it says my device don't support the syatem

    iOS does not have native support for Flash content. If you want to play Flash games, you can download Photon from the Appstore. It is $4.99. It allows you to view Flash content and play Flash games byconnexting to a remote server that streams content back to your iDevice. It is the perect solution until more web pages embrace HTML 5. I hope this solution helps you. God bless.

  • Does Presario f767nr support AHCI?

    I have a Compaq Presario F767nr and just installed a SSD (Samsung 840EVO).  In order to optimize the drive, I need to enable AHCI, but(of course) bios setup does not option this, and Samsung Magician does not detect it.  Does the MB / BIOS / Nvidia drivers even support AHCI?  Bios is Phoenix F.0A, 3/22/2011.
    Thank you for any help you can give me,
    Bo

    Hi Bo,
    Thank you for your query.  I am glad to assist you.
    I understand that you are trying to install, a ssd drive and it is not detected by the bios.  Your system does not support SSD drivers. For your information I am including the HP G6000 Notebook PC and Compaq Presario F700 Notebook PC Maintenance and Service Guide.  Under hard drives,  (page 40) you will see there are only 3 supported drives.  I hope this has answered your question.
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • Maximum capacity that supports msata SSD of ENVY 15-j063cl

    I'd like to add an SSD on my HP ENVY 15-j063cl. Who can tell me the maximum capacity that supports msata SSD of this laptop? Which brand of msata SSD is recomended? Thanks very much!
    This question was solved.
    View Solution.

    wantsy wrote:
    I'd like to add an SSD on my HP ENVY 15-j063cl. Who can tell me the maximum capacity that supports msata SSD of this laptop? Which brand of msata SSD is recomended? Thanks very much!
    Hi,
    I don't think there is any limit on that. I believe that anything up to 500GB will definitely work and most likely even drives up to a 1TB. Samsung is a very popular brand with Evo and Pro series drives. I'd go for one of them.
    Dv6-7000 /Full HD/Core i5-3360M/GF 650M/Corsair 8GB/Intel 7260AC/Samsung Pro 256GB
    Testing - HP 15-p000
    HP Touchpad provided by HP
    Currently on Debian Wheeze
    *Please, help other users with the same issue by marking your solved topics as "Accept as Solution"*

  • Every time I try to download a free or paid app or in iTunes   it asks me for a credit card. (Which i don't have one)  How can i download free apps without a credit card and not reset my apple ID? I already put in 20$!!!!!

    Every time I try to download a free or paid app or in iTunes 
    it asks me for a credit card. (Which i don't have one)
    How can i download free apps without a credit card and not reset my apple ID?
    I already put in 20$!!!!!

    How to Get Apps From the App Store Without a Credit Card
    http://ipadhelp.com/ipad-help/how-to-get-free-apps-from-the-app-store-without-a- credit-card/
    Creating an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card
    http://support.apple.com/kb/ht2534
    If None is not available - On your computer launch iTunes and click "iTunes Store" in the left navigation pane. Click the "down arrow" next to your name at the top right side of the page and click "Account." Enter your username and password and click "View Account" to log into your account information. Next to your Payment Type, click "Edit." Select the "None" button and click "Done." Confirm that your card has been removed by returning to the Apple account information screen. Under Payment Type, it should say that there is no credit card on file.
     Cheers, Tom

  • The battery of my macbook died in 2 years and when I call an inform them Mr ********** (sr advisor) gets outrightly rude and tells me sorry but don't think that you can be an exception to it. Extremely shocked at this approach by apple.

    The battery of my macbook died in 2 years and when I call the servise center to inform them cuse i personally am dissapointed but at the same time want to know the reason why something like this has happened ith a product of apple. Mr ****** (sr advisor) gets outrightly rude and tells me sorry but don't think that you can be an exception to it. Extremely shocked at this approach by apple. Then throughout the conversation he chose to mute me and wouldnt answer my queries. And when i asked him whos the serior I could talk to. He tells me "Im the seriormost that you can get upto..there is nobody above me you can talk to".
    Now what do i do???
    <Edited by Host>

    By doing so, you are violating the terms of use of this support forum
    "Post constructive comments and questions. Unless otherwise noted, your Submission should either be a technical support question or a technical support answer. Constructive feedback about product features is welcome as well. If your Submission contains the phrase “I’m sorry for the rant, but…” you are likely in violation of this policy."
    "Breach of the Agreement
    If you fail to abide by these terms Apple may remove your submission. Apple may also send an e-mail that informs you that your Submission has been deleted or edited. Repeated inappropriate Submissions may result in your relevant account or accounts being placed into temporary or permanent suspension of your ability to participate in any or all of the areas on the Site."
    https://discussions.apple.com/static/apple/tutorial/tou.html

  • Is there a small and lite portable, around 5 lbs or less, printer for my iPad to take on vacation for photos, more than 1 at a time, and words? I have both HP dj460 and ps 616A but they don't support iPad. Is there a device, work around or ePrinter air pr

    Is there a small and lite (5 lbs or under) portable air printer / ePrinter I can use to print contact sheets of photos and words with my iPads? I already have the HP dj460 and HP ps 616A but they don't support the iPads.

    Helper app -- /print n share
    Print directly to the widest range of network or WiFi printers available in any app. Alternatively print via your computer to ALL printers including USB & Bluetooth printers. View read and display large PDF, Office & iWork files. Easily transfer & store files from the Cloud or your computer.
    https://itunes.apple.com/us/app/print-n-share/id301656026?mt=8
    HP  ePrint Home & Biz
        http://itunes.apple.com/us/app/hp-eprint-home-biz/id299531647?mt=8
    http://h10025.www1.hp.com/ewfrf/wc/searchResults?tmp_product=HP+Photosmart+5515+ e-All-in-One+Printer+-+B111a&product=5063608&tmp_qt=eprint&cc=us&dlc=en&lc=en&su bmit
    Mobile printing.
    This blogger found one solution.
    http://genuinely-original.blogspot.com/search/label/iPad%20Printing
    Make Portable Printing Easier with Print n Share and the Brother RJ-4040
    http://prmac.com/release-id-44494.htm
    Use an airprinter with a power inverter
    http://genuinely-original.blogspot.com/search/label/iPad%20Printing
    see makethisstuffwork post in:
    https://discussions.apple.com/thread/4987217?tstart=0
    Brother PocketJet® 673
    -- Prints on a variety of 8.5" wide thermal media.
    -- Print PDF files from your iPhone and iPad with the PJ-673 Print app
    http://www.brother-usa.com/Mobile/ModelDetail.aspx?ProductID=pj673-k&PG=26#.UeX0 Z18pDDJ
    List of supported AirPrinters.
       http://support.apple.com/kb/HT4356

Maybe you are looking for

  • Display information on Month wise

    We have one requirement and we need to display the Month wise information on the report (Sysdate - 1, sydate -2 ....etc) for example today is 08 Sept 2011 In template level we need to display below Sept 2011 Aug 2011 Jul 2011 Jun 2011 May 2011 Apr 20

  • Transition distortion and choppy bird wings - please help

    Hello. 2 issues please. *1. Transitions* Lately, I've noticed that when I use certain transitions, after they're exported they come out rough, pixelated, and grainy -- cross-stretch in particular. It looks fine in the project. You can see an example

  • Issue with adobe reader extracting embedded font

    I am unable to open a PDF file using adobe reader (I have Windows 7). The error message states: cannot extract the embedded font HDJDOS + A Caslon Pro-Regular. Some characters may not display or print correctly. Any suggestions on how to correct this

  • CRM order EXPLOSION   like BOM explosion in R/3

    Hello friends, I want to list our CRM service orders with their hierarchy. The program or function "CRM order Read " is not enough . In doc flow we get only the first level. In our system we have 3- 6 levels . Have you got any idea?

  • 00(055) : fill in all required entry fields - goa DISTRIBUTION ERROR

    GOA CREATED  AND DISTRIBUTED before that i checked in SRM no ERROR message IN srm but while posting in to ecc In ECC APPLICATION NOT POSTED BD87 51 status code 00(055) : fill in all required entry fields BLOARD meaningless error . clue less. give me