Bootcamp goes blank screen after startup sign.

I'm unable to start up my bootcamp. It just goes blank screen after the startup moving icon and stays blank screen. Can anyone help? Thank you in advance!!!

@MT1
‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with the Forum's private messaging please click here to learn more.
Thank you,
Omar
I Work for HP

Similar Messages

After overlaying Air SDK 3.6, iOS projects show a blank screen after startup.

Hi,
I recently overlaid Air 3.6 in Flash Builder 4.7. My projects are using stage3D via Starling. Using the 3.4 SDK that comes installed with FB 4.7, my projects compiled and run fine with both debug and release builds. After overlaying the 3.6 SDK, the projects work fine in the simulator and on Android but when I run the projects on iOS I get a blank screen. I reverted to the 3.4 SDK and my projects work fine on iOS. But, I'd like to be able to have access to the features of 3.6, any and all suggestions would be very much appreciated.
Thank you for you time.
Chris

Did you follow these exact directions?
http://helpx.adobe.com/flash-builder/kb/overlay-air-sdk-flash-builder.html
(They changed recently and are updated for Flash Builder 4.7)
For step 4, all you have to do is create the blank strip folder - don't need to copy the other files with 4.7 and AIR SDK 3.6.

Blank Screens After Startup and Wake From Sleep

About half the time I startup my Mac Pro or wake it up from sleep, the screen will go blank, usually about 20-30 seconds after video appears on the screen. The system seems to be running, you just can't see anything.
I have had the screen go completely white, black or blue and occasionally, there will be a solid color with vertical lines throughout the screen. The only thing that will get display back is a forced restart of the entire computer.
I've zapped PRAM and run run hardware test with no issues reported but the problem keeps coming back.
I'm driving a Dell 2407 on my ATI 1900XT. Dell supplied a single-link DVI cable, could that cause issues with a dual-link port on the video card?
Mac Pro Mac OS X (10.4.9) ATI 1900XT, 2GB RAM

Intel Macs, especially MacBook Pros seem to be notorious for sleep issues...either not sleeping when supposed to, or not waking up from sleep properly.
My MacBook Pro has come out of the brief case hot as heck with a dead battery often enough, even with all the updates appled. If you listen to the MacBreak Weekly podcast, that's a common complaint of Merlin Mann, who can't figure it out with his machine, and he's no dummy when it comes to Macs. Not very encouraging, is it?
Still, what I would try is reinstalling the OS X 10.4.9 update. I've often read/heard on podcasts that it's better to manually install the larger Combo version of the updates. That seems to have fixed problems for me in the past.
Get the Intel 10.4.9 Combo Update here: http://www.apple.com/support/downloads/macosx1049comboupdateintel.html
Good luck.

G4 titanium blank screen after startup - gig htz

Screen is very dim but comes on for split second if I restart or if I change monitor settings.

Hi, baziliver. Your PB's inverter board, which provides power to the backlight, may be failing.
Disconnect all peripherals from the computer, make sure the F1 key isn't stuck in the depressed position, and verify that adjusting the brightness upward using the F2 key has no effect on the problem. Restart the computer to see whether the problem still occurs after rebooting. If it does, you'll need to make sure the inverter and video cable connections inside the computer are secure. If disconnecting and firmly reconnecting those doesn't do the trick, replacing the inverter is the next step.
http://www.ifixit.com/Guide/Mac/PowerBook-G4-Ti-DVI/Inverter/33/9/

Blank screen after startup. bios corrupted

Hello,
I could really use some help I have a massive project due in a week and cannot access MATLAB anywhere but my laptop. Today windows decided to do its own thing like always and update itself which never seems to work right. But when restarting HP's terrible software also decided to attempt to update my bios. Like usual it failed and proceeded to corrupt my bios for the second time. Unfortunately this time I am out of warranty so they will no longer assist me even though this has been a recurring problem. Could anyone help me figure out how to get this working again? I have been searching Google, but nothing has worked for me I have an ho envy 15" which I believe model jt-1500. I really don't have anymore time to spend on scouring the internet with work and school and really need my laptop to just work again. I can also tell you I'll never buy an HP laptop again unless they can get their software figured out because I am afraid to ever update anything on my computer now.
Thanks for the help in advance

Hi,
As I dont have the computer infront of my I am limited in things I can do to fix the problem please try the following two things below to see if they fix your problem if they dont your only option will be take your laptop in for repair howerver you dont have to take to HP you can take it anywhere.
First thing I would like you to try is a power drain to do this remove the AC adapter from your pc and remove the battery, once you have done this press and hold the power button for 20 seconds once this is complete reinsert battery and AC adapter and try the computer again.
The next thing you could attempt is updating the bios this hopefully will install successfully this time, to do this press and hold down the windows key and the letter b on the keyboard then power on the computer still holding down the two keys it will attempt to update the bios.
Hope this helps,
James

Hi my iPhone 4 won't turn on . When plugged in on several different chargers the following happens . Blank screen then apple sign for a short period then it buzzes and goes blank. When connected to mac get message that phone is in recovery mode and that

Hi my iPhone 4 won't turn on . When plugged in on several different chargers the following happens . Blank screen then apple sign for a short period then it buzzes and goes blank. Have tried power button and home button but no change ,When connected to mac get message that phone is in recovery mode and that i must restore this phone before it can be used with iTunes . Is this my last resort as I have some photoessays I don't want to loose.
PPlease help

Hello, Chantal105
Thank you for visiting Apple Support Communities.
If your device is in recovery mode you will need to restore the device.
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808
Cheers,
Jason H.

My phone screen goes blank and after a minute or so goes back to home screen. why?

hello. my phone screen goes blank and after a minute or so goes back to home screen. why? any help please?

Howdy mbaeguasu,
It sounds like your iPhone may be restarting unexpectedly while you’re using it. Take a look at the article linked below and, if you haven't already, try installing the latest version of iOS on your device.
If your iOS device restarts, displays the Apple logo, or powers off while you're using it - Apple Support
So long,
-Jason

Blank screen after signing in

I'm stuck in a blank screen after signing in. The options to sign in or sleep function, but nothing else. And when I sign in the screen is blank.

I am new to the "community thing"... I have the same question as you regarding the blank screen... I do not see any answers to your questions or know how to get to them...

Long blank screen on startup

I have a 2012 Mac Mini i7 with 10.9.2. This morning when I rebooted, it did not work right and I just saw static on my monitor. I manually turned off the Mac Mini then restarted it. It boots fine now but now I have a long blank screen after the chime and before it asks for my password. I reset my SMC and PRAM a few times but no change. I reselected my Macintosh HD in the Startup disk too. It is like it is timing out looking for something and then after about two minutes it goes to my Macintosh HD for the password. So it boots up fine now except for this new long pause. Before it would go to the password almost immediately after the chime.
Any other thoughts on what I should do? Thanks.
Doug

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Select the messages logged after the boot, during the time something abnormal was happening. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
For example, if the problem is a slow startup taking three minutes, post the messages timestamped within three minutes after the boot time, not before. Please include the BOOT_TIME message at the beginning of the log extract.
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the entire contents of the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post any other kind of diagnostic report, such as hang logs — they're very long and not helpful.

The screen of my imac always goes to the maximum exposure. Then the light icon on the screen. After reducing the brightness goes my screen after a few minutes back to the maximum intensity with the brightness icon back on my TV screen.

The screen of my imac always goes to the maximum exposure. Then appear the light icon on the screen. After reducing the brightness goes my screen after a few minutes back to the maximum intensity with the brightness icon back on my screen.

Try resetting the SMC and if that doesn't work then reset the PRAM too.
SMC RESET
Shut down the computer.
Unplug the computer's power cord and all peripherals.
Press and hold the power button for 5 seconds.
Release the power button.
Attach the computers power cable.
Press the power button to turn on the computer.
PRAM RESET
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.

After upgrading to the newest version of firefox my Juniper J-web web-gui showing a blank screen after login.

Hi.
After the newest version of firefox the browser only show a blank screen after doing the login on all Juniper SRX devices.
Some one who can help me here?
Kind regards
Jonas (Denmark)

Jonas,
Please see:
*[https://support.mozilla.org/kb/Server+not+found]
*[https://support.mozilla.org/kb/Firewalls]
*[http://kb.mozillazine.org/Error_loading_websites]
*[http://kb.mozillazine.org/Browser_will_not_start_up]
It could be that you need to reset Firefox to its defaults, however there could also could be something going wrong with the login request. Please check the Firewalls and loading websites to see if anything is blocking a request.

Blank Screen after 703HP3 (Linux)

Hi,
after update a VMWare-SLES10SP2-Server with DOM and Webaccess HP703HP1 to
HP703HP3 I got a blank screen after starting the machine.
All logs look got but I can't login in. Only a blank web page. No login. No
picture. Nothing.
Any idea?
Have anybody the same problem?
I went back to my snapshot. So my user can login.
Now I will try it at another server.
Andreas

Hi Massimo,
the login web page for webaccess for the user...
Andreas
"Massimo Rosen" <[email protected]> schrieb im Newsbeitrag
news:[email protected]..
> Hi,
>
> Andreas Schild wrote:
>>
>> Hi,
>>
>> after update a VMWare-SLES10SP2-Server with DOM and Webaccess HP703HP1 to
>> HP703HP3 I got a blank screen after starting the machine.
>
> What do you mean "a blank screen"? A blank screen where?
>
>> All logs look got but I can't login in. Only a blank web page. No login.
>> No
>> picture. Nothing.
>
> I'm sorry, but it's totally unclear what you're talking about. What web
> page?
>
> CU,
> --
> Massimo Rosen
> Novell Product Support Forum Sysop
> No emails please!
> http://www.cfc-it.de

Blank Screen after Hibernate

Hi,
On my DV6-3085 I sometimes power up by opening the lid and get a blank screen after a few seconds.
The screen will say Starting Windows, flash and then go blank. At this point the finger print scanner is still working and responds but you cannot obliviously see anything.
I fairly suspicious this happens after the laptop has not been used for a little while (overnight) after a lid close, so the Sleep light has stopped flashing and the laptop is in hibernate mode.
My guess is it is something to do with switching graphics adapters. I've not yet decided if plugging the power in first does or does not make a difference or being on battery or AC when the lid was closed.
I've got the latest drivers according to the HP driver update utility.
Anyone with the same problem or have a solutions?
Thanks,
Dean.

Hi,
On my DV6-3085 I sometimes power up by opening the lid and get a blank screen after a few seconds.
The screen will say Starting Windows, flash and then go blank. At this point the finger print scanner is still working and responds but you cannot obliviously see anything.
I fairly suspicious this happens after the laptop has not been used for a little while (overnight) after a lid close, so the Sleep light has stopped flashing and the laptop is in hibernate mode.
My guess is it is something to do with switching graphics adapters. I've not yet decided if plugging the power in first does or does not make a difference or being on battery or AC when the lid was closed.
I've got the latest drivers according to the HP driver update utility.
Anyone with the same problem or have a solutions?
Thanks,
Dean.

IMac goes blank screen and freezes

Hi,
I got 24" iMac running OS X 10.5 and Win 7. Last night I was running windows playing some game when screen gone totaly black for unknown reason and iMac froze.
After that booting to OSX it caused grey screen just after a couple of seconds when the desktop has showed. Booting from recovery CD causes the same at the point when you see "Loading Apple" thingie.
I did extended apple hardware test and it showed nothing.
They only way for me to get online and post this message is getting Win7 into a safe mode or VGA mode without NVIDIA driver loaded. Btw when booting win7 normaly it goes black screen after the desktop loaded.
My warranty period has expired month ago. And last time contacting support about the hard drive issue was a real trouble. Im in Ukraine, Odessa. And this guys are in Kyiv.
So what should I do?

update:
OS X seems to be working in safe mode and, I got crash report after booting in normal
Interval Since Last Panic Report: 96 sec
Panics Since Last Report: 1
Anonymous UUID: 0DAB24C5-621E-4E50-BE00-170C9BCE23E2
Mon Mar 8 17:28:53 2010
panic(cpu 1 caller 0x00C706A4): NVRM[0]: Read Error 0x00088004: BAR0 0xe2000000 0x66417000 0x092480a2 D0 P2/4
Backtrace (CPU 1), Frame : Return Address (4 potential args on stack)
0x5b5132a8 : 0x12b4c6 (0x45f91c 0x5b5132dc 0x13355c 0x0)
0x5b5132f8 : 0xc706a4 (0xea0e80 0xea0e80 0xe656d4 0x0)
0x5b513358 : 0xf29afd (0x7b11804 0x7b1c004 0x88004 0xae7f0300)
0x5b5133a8 : 0xebaa82 (0x7b1c004 0x88004 0xae7f0300 0xebaa4f)
0x5b5133c8 : 0xf42bb5 (0x7b1c004 0x7b4bc04 0x4 0xae7f0300)
0x5b513448 : 0xf545f4 (0x7b1c004 0x7b04204 0x1 0xa)
0x5b513488 : 0xd720ce (0x7b1c004 0x6ff9004 0x0 0x0)
0x5b5134c8 : 0xd50f72 (0x6ff9004 0x2ee00 0x3 0x0)
0x5b513548 : 0xd50cfd (0x7b1c004 0x7d95a04 0x4 0x1)
0x5b513588 : 0xd39878 (0x7b1c004 0x7d95a04 0x0 0xafc8)
0x5b513678 : 0xd347a2 (0x7b1c004 0x7d93004 0x0 0x0)
0x5b5136b8 : 0xdce900 (0x7b1c004 0x7d93004 0x0 0x2)
0x5b5137d8 : 0xd531ee (0x7b1c004 0xc1d00021 0x1008000 0x20000107)
0x5b5138e8 : 0xcf6a29 (0x7b1c004 0x0 0xc1d00021 0x1008000)
0x5b513928 : 0xcf676d (0xc1d00021 0x1008000 0x20000107 0x736ac24)
0x5b513978 : 0xc7e6b9 (0xc1d00021 0x1008000 0x20000107 0x5b513c08)
Backtrace continues...
Kernel loadable modules in backtrace (with dependencies):
com.apple.nvidia.nv50hal(5.4.8)@0xeb6000->0x1109fff
dependency: com.apple.NVDAResman(5.4.8)@0xc57000
com.apple.NVDAResman(5.4.8)@0xc57000->0xeb5fff
dependency: com.apple.iokit.IONDRVSupport(1.7.3)@0xc49000
dependency: com.apple.iokit.IOPCIFamily(2.6)@0x5ce000
dependency: com.apple.iokit.IOGraphicsFamily(1.7.3)@0xc0f000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
9L31a
Kernel version:
Darwin Kernel Version 9.8.0: Wed Jul 15 16:55:01 PDT 2009; root:xnu-1228.15.4~1/RELEASE_I386
System model name: iMac8,1 (Mac-F227BEC8)

Laptop only coming up with a blank screen after set-up?

Ok, so. My parents bought me a brand new hp laptop for christmas. On christmas day i went through the whole set-up process and did all the steps it told me to do. When i'd been through all the steps, i got a loading symbol and ever since, all it comes up with is a blank, black screen and a mouse icon that i can move. I'm not 100% sure of the model though (appologies). What do i need to do??
Cheers

Hello @15_,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I have read your post on how your notebook is coming up with a blank screen after setting it up. Is the power on the computer on? Is there an error message on the screen? I would be happy to help you, but first I would encourage you to post your product number for your computer. Below is a is an HP Support document that will demonstrate how to find your computer's product number. In addition, it will also help if you indicate which operating system you are using; and whether your operating system is 32 or 64 bit. The more information you can provide, the better!
How Do I Find My Model Number or Product Number?
Which Windows operating system am I running?
Is the Windows Version on My Computer 32-bit or 64-bit?
Please re-post with the necessary information, this way I will be able to research this further for you. I look forward to your reply!
Cheers!
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Bootcamp goes blank screen after startup sign.

Similar Messages

Maybe you are looking for