Bootcamp Version 3.1 --List of bug reports for the Development Team to fix.

Please create a list of bug fixes for the Development Team to address in the next version of Bootcamp (e.g., 3.2). This thread assumes that all users are presently running Bootcamp 3.1:
1. Sound should not be muted every time a user reboots a newer MacBook laptop using Windows 7 Ultimate, 64-bit. My sound is always muted when I load Windows 7 Ultimate, and I have to manually turn it on each time.
2. Left and right clicks on the trackpad should work out of the box using Windows 7 Ultimate, 64-bit. My left click operates a little less than 50 percent of the time -- i.e., I click it and nothing happens. I had to switch to "tap to click" as a workaround, however, I prefer the good old solid left click.
Please step right up and add to the bug report list so that the developers have a checklist of issues that need to be fixed. When the bug report list has grown to a respectable size, I'll send an official letter to the C.E.O. to facilitate the bug reports reaching the development team.
Message was edited by: lawlist

lawlist wrote:
Please create a list of bug fixes for the Development Team to address in the next version of Bootcamp (e.g., 3.2). This thread assumes that all users are presently running Bootcamp 3.1:
1. Sound should not be muted every time a user reboots a newer MacBook laptop using Windows 7 Ultimate, 64-bit. My sound is always muted when I load Windows 7 Ultimate, and I have to manually turn it on each time.
2. Left and right clicks on the trackpad should work out of the box using Windows 7 Ultimate, 64-bit. My left click operates a little less than 50 percent of the time -- i.e., I click it and nothing happens. I had to switch to "tap to click" as a workaround, however, I prefer the good old solid left click.
Please step right up and add to the bug report list so that the developers have a checklist of issues that need to be fixed. When the bug report list has grown to a respectable size, I'll send an official letter to the C.E.O. to facilitate the bug reports reaching the development team.
Message was edited by: lawlist
FWIW, I don't have the symptoms you describe. So I think before you call a symptom a "bug" I think you should confirm that it is indeed a "bug" and not a configuration, software, or hardware issue caused by something such as incorrect installation, incorrect setup, or any other third party or user caused action.
Also, FWIW, I don't think this forum is intended to be used as a survey for gathering "bugs". Apple has an official feedback page where they gather user experiences such as yours. I think if you post your "bugs" there they will get faster attention than posting them here in this user-to-user help forum.

Similar Messages

Right place to submit bug reports for the discussions forums?

I know you can post suggestions here regarding how the Discussions system may be improved, but I'd just like to record a bug somewhere and then be informed if and when it is ever fixed. I'm thinking of something like the bugreporter web app that apple makes available. Anyone know about anything like that?

Tom Gewecke wrote:
You'd be surprised.
With pleasure!
Try it with bugreport.apple.com. Need to be a registered ADC Member, but that frees. Be sure to pick a bug that is reproducible with a simple step by step recipe on the most current software.
So what is this bug you have been talking about?
Recurring complaint of mine:
March 2006 [If the RSS feeds contained pubDate and author that would be great!|http://discussions.apple.com/message.jspa?messageID=1892109#1892109]
April 2008 [better rss feeds without jf namespace prefix|http://discussions.apple.com/thread.jspa?threadID=1468264&tstart=189]
The RSS feeds are almost useful. They actually include the author and create date information, but do so in a format that neither safari or any other garden variety RSS reader handles.
Jive's own documentation on the subject [Jive Community: Content Syndication via RSS|http://www.jivesoftware.com/community/docs/DOC-1022] recommends reformatting the output to suit the needs of your audience in the section titled "*Displaying RSS (or, actually doing something with this stuff)*".
It seems the jf: prefixed tags aren't meant to be pushed out to the RSS clients. I certainly haven't found a RSS reader that deals with them correctly or lets you workaround them. So although the feeds have a creation date, modification date, author, and reply count, none of that information can be seen in a garden variety RSS reader. This is particularly a problem for the create date, since the create date of each article is replaced with the pub date of the feed. The pub date of the feed is the time when you pull it down, and that changes each time the feed is refreshed.
Anyway ... it seems to me that it would be a small and correct change that would take the existing RSS offerings that last inch into the realm of useful. Maybe I'll be surprised.

How to I log a bug report for the Online Mozilla Support?

There is a bug in the online support forum. How do I report it?

Hi there,
All bugs can be filed here: https://bugzilla.mozilla.org/ .
Regards,
Ziggy

Is there a place to submit bug reports for iTunes 11?

I was wondering if anyone knows of any communities, or ways in which we can submit errors, or bug reports for the new version of iTunes, version 11.0? The 2 issues so far that I am seeing, is:
1. My account information: iTunes shows I have hidden purchases, when on all my iDevices, I have 0. (In fact, before the update, I un-hid all previously hidden purchases, and it showed correctly).
2. When syncing a device, on the last tab for items on device, on my iPhone 4, iOS 6.0.1, it shows I have 2 songs downloaded from my collection, when I know I have 0. (Verified by checking Settings>General>About>Songs = 0

Yes,
In iTunes;
Help (pulldown)
"Provide iTunes Feedback"
However, as of this writing iTunes 11 isn't listed in the 'Version list, so make sure that you state the version in your description.
-Alan
ps. If you dont see the Help pull-downmenu, press 'Alt' to toggle it.

How to submit a bug report for OSB? - restore fails if number of items per page is changed from the default of 30

In the OSB web gui, one of my users found that if the number of items per page is changed from the default of 30, the restore of the file will fail. He tested this using recent versions of Firefox and IE. We have verified this to also be the case using Chrome.
In a directory containing over 100,000 files, moving 30 at a time to find the one to be restored is a very frustrating user experience.
How do I file a bug report for this issue? Is there a workaround for this bug to enable my users to more easily find the file to restore without being restricted to the default of 30 items per page?

Yes there is a bug in the webtool in the current release. You can use the commandline obtool to do the restore, that is much faster and works fine.
Thanks
Rich

Submitting bug reports for linux player

hello,
we're in the process of improving the
feedback
form to better collect your input on the linux version of flash
player 9. while we are waiting for these form updates to be made,
please use the "Problem description" field near the top of the form
to provide additional information such as:
* distribution and version
* browser and version
* any mutant library configuration (other than those included
with distribution)
* camera/microphone type (if applicable)
this information will greatly help our QE team in reviewing
and reproducing your issues, which leads to issues getting fixed
faster.
thanks!
jennifer
(adobe's flash player program manager)

Anyone have any idea how to submit a bug report for Oracle XE.Posting bug description in this Forum should be enough.

Sending a bug report on the OS and a sleep mode problem.

I find the bug button in Safari really convenient for sending Apple bug reports. And when other applications crash, you usually get an error dialog with a button to send a bug report. But sometimes problems arise that require reporting, but which don't fall in either of these categories. It would be very handy to have a bug "button" for the OS, or perhaps just a menu selection in the Finder menu bar that invokes a bug report dialog box. I know you can dig around and find the URL for Apple's bug report web page, but I am always forgetting it -- I suppose I could just bookmark it, but then I'd just have to dig around in all the bookmarks to find it. Better would be a utility built-in to the OS for sending bug reports (like Safari's). It could also automatically transfer necessary info about the OS rev and such.
The problem I had was this. I have a script that puts my iMac to sleep. I put the script alias on the task bar and a single click puts the computer to sleep (easier than using the menu). Unfortunately, I sometimes click it by mistake when I am trying to click an adjacent icon in the task bar, and the Mac starts going through its cycle to enter sleep mode and is impervious to anything I do to try and cancel it. I tried pressing the space bar continuously to prevent it from going to sleep, but that did not work. Worse, when it went to sleep and I woke it up again, the task bar would not appear, clicking on app windows did not activate them, Finder menus could not be selected, etc. The cursor would move, but I could not do anything else. (I wish now I had noted if the clock in the menu bar was still advancing, but I didn't think to do that.) I powered down the iMac from the power key and rebooted. Things are working fine now.
I wanted to send a bug report on this, but realized that unlike Safari, there was no button or menu selection for doing that. So here I am.
Any suggestions are welcome.
TIA,
Drake

[email protected]
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Report for the List of Vendor for which no Purchase order has been created

Hi ALL
Please let me know if there is any Report for the List of Vendor for which no Purchase order has been created
regards,

Hi Prateksha Vaid ,
Go to transaction S_ALR_87012093
Select accounts with no purchases checkbox and execute
Diwakar
reward if useful

Bugs report for Sony Bridge for Mac

Hello,
I'd like to report two bugs on the Sony Bridge for Mac software, thanks to inform the development team about them:
- Conflict between Sony Bridge for Mac and the Image Capture (more precisely the PTPCamera process):
When the Xperia smartphone is connected to a Mac, after 30 to 40 seconds a process called PTPCamera start to analyze the pictures inside the device. This process is a subprocess used by the Image Capture software, which is included with Mac OS X and allows to retrieve pictures from an APN.
If Sony Bridge for Mac is launched too early, before the PTPCamera process finish its work, than Sony Bridge fails to recognize the phone and invite to try to unplug and replug it. In fact this is a pretty bad advice in that case, as unpluging and repluging will make the PTPCamera process to restart from the beginning.
If we wait patiently for a few minutes (between 3 to 5 minutes, depending on the amount of pictures in the phone) that the PTPCamera process finish its work (we can monitor its CPU usage using Activity Monitor to know if it's working or not), and than we laucnh Sony Bridge, the phone recognition works just fine.
Knowing that, it'd be great if the development team can work on that issue so that Sony Bridge works even if PTPCamera (and so Image Capture) is running, even if it implies a longer necesary time to recognize the phone.
- Other bug: If the amount of data transfered to the phone is important, Sony Bridge may freeze in the middle of the transfer
For example, I've a music library of about 2000 songs representing 12GB of data. If I try to transfer it all at once, Sony Bridge will freeze after some time.
This occurs either when using the iTunes synchronization option of Sony Bridge, or using the file explorer.
Also the transfer speed is very low.
A workaround to that issue is either to transfer small amount of data at a time, but it's not very practical.
Configuration used:
MacBook Pro Core i7 2.3GHz
8GB RAM
Sony Bridge for Mac 2.2
Xperia S with Android 2.3.7 and update 6.0.A.3.73 installed
To reproduce these issues I recommend to test with a phone containing a lot of data inside, both in music (I have 12GB of music) and pictures (I've about 100 pictures), this would greatly help fixing these bugs and testing the software stabiltity and performances.
Best Regards

Hi and thank you for posting. I have highlighted this thread to one of my colleagues working with Bridge for Mac. I hope he can get something useful out of it.
Thanks for posting!
What do you think about this forum? Let us know by doing this short survey.

Report for the list of materials with component & assembly scrap

Dear Experts ,
I have been told to generate a report for the materials which are subjected to component and assembly scrap . Please guide me for the same . Many thanks in advance.
Yours
Aman Khan

Dear Aman,
It you are maintaining both assembly scrap & component scrap both in MM you can read MARC table by creating simple query.
Read Field MARC-AUSSS & MARC-KAUSF.
If you are maintaining component scrap in BOM item read STPO-AUSCH.
[Query Creation|How do create query in SAP?]

How to take a report for the assigned transaction and activity in a role

Hi Colleagues,
I want to take a report for the assigned transaction with activity for all roles, which are assigned to the users,
Transaction list for a role i can able to take it from SUIM but not able to take the ACTVT for the role.
Please suggest how to take this information.
BR,
Jai

Hi Jaikumar from the post :
I think you have reached the state of finding the USER to ROLE relationship
Take the output to an excel,
COPY just the roles column exactly in order do not rearrange , use AGR_1251 like other experts have mentioned
insert the roles copied from you buffer and execute, the output will have multiple entries for each role take the output to an EXCEL again , make it unique and match the outputs between both the EXCELS.
It will be a little tricky to do this, but I think you are proficient in MS EXCEL.
This is one of the ways to do , there are many other ways to do it.

Genearate a Report for the following data

Hi All
The following is of my requirement
Selection Screen Should be as follows:
Plant (required) QALS-WERK
Storage Location MCHB-LGORT
Material Number QALS-MATNR
Batch Number MCHB-MATNR
MRP Controller MARC-DISPO
Inspection Lot Number QALS-PRUEFLOS
Inspection Lot Creation Date QALS-ENSTEHDAT
Inspection Lot Origin QALS-HERKUNFT
PO Number QALS-EBELN
Vendor # EKKO-LIFNR
Goods Receipt Date MKPR-BUDAT
Delivery Number QALS-KTEXTLOS
Marked in House Date
Sterile Load # ZC012-STBAT
Supplying Plant EKKO-RESWK
Profit Center QALS-PRCTR
Radio Buttons for Selection Screen:
 Show all stock (not just Q stock)
 Show only past due stock (GR Date + GR processing time > today)
 Include Serial Numbers
Fields for report:
Plant QALS-WERK
STO/PO QALS-EBELN
Delivery/Production Order # QALS-KTEXTLOS
Sterile Load # ZC013-STTYP
Inspection Lot Number QALS-PRUEFLOS
Material QALS-MATNR
Old Material MARA-BISMT
Serial #s (all serial #s with material ITOB-SERNR
batch combination)
Batch QALS-CHARG
Sloc (all SLOCs with Q status items) MCHB-LGORT
Batch Exp Date DFBATCH-MHD_IO
Quantity (in each SLOC) MCHB-CINSM
Profit Center QALS-PRCTR
Date Marked In House ZTMODE-TDATE
GR Date QALS-ENSTEHDAT
Expected GR Processing Time MARC-WEBAZ
Date Moved to NCMR MKPF-BLDAT
Days in House System date ZTMODE-TDATE
Days in QI System date - QALS-ENSTEHDAT
Days from QI QALS-ENSTEHDAT - MKPF-BLDAT
Days in NCMR System date - MKPF-BLDAT
MRP Controller MARC-DISPO
MRP Controller Name T024D-DSNAM
Standard Cost MBEW-STPRS
Extended Standard Cost MCHB-CINSM * MBEW-STPRS
How we can develop a report for the above, because they havn't given any conditional checking. Supress if any Ztables used.
i would appreciate if you can send an earliest reply and reward points for the same.
if any queries just reply me i can clarify.
Regards
Prabhu

Hi Prabhakar,
Well you can opt for ALV display...
You want to generate report based on plant data..
Once the user enters the plant, you can extract the remaining info from table MARA, QALS, EKKO.
The radio buttons will decide your selection critera.
I dont think any functional guy will give you everthing spoon feeded. You will have to explore those tables and the relevant fields.
In case you are finding it to difficult to get the relations between the tables or finding list of tables,
i shall send u docs which will help u solve the problem.
Give me ur email id
Regards,
Tanveer.
Mark helpful answers
Message was edited by: Tanveer Shaikh

Withholding Tax Report for the Vendor

Hi Friends,
I want to use the report S_PL0_09000447 - Withholding Tax Report for the Vendor, in the selection paramaters the field "Country Variant" is mandatory but in this list i cannot find the relevent country code here.
Could any one please let me know where to maintain this?
Regards,

Dear Sapref,
the documentation for that report says:
To use the report for additional countries, select an appropriate
variant as reference; hide the country-specific heading by selecting the
field Country not in heading and entering the required country in the
field Additional heading.
Please be kindly informed that You can use an existing country variant which may match the closest to
your requirement.
Aas far as I know there is no country validation between the company code's country and
the country variant.
Please be kindly informed that You can use the generic report: RFIDYYWT.
I hope this can help You.
Mauri

Help needed on balance sheet plan report for the current year

Hi BW gurus,
I have a problem with reporting.
I need to get Balance-Sheet Plan Reports for the Planned year and for the current year.
To get the report for the planned year its straight forward just by restricting 0balance by the version to 1 and the valuetype 20.
But I have a problem with the current year report.
I have fiscal year and the company code as the variables.
The report should be like this.
If we need the report as of today(July 26 2006),we may input 2006 for the fiscal year variable.
And the 0balance for the twelve fiscal periods should be as follows
From jan 2006 to june 2006(fiscal periods) it should have only the actuals
From july 2006 to dec 2006(fiscal periods) it should have only the plan
I have already built a query by having two restricted keyfigures on 0balance.
One by restricting version and valuetype 0 and 10 , and the other with 1 and 20.
But in the report I am getting two columns of data for each fiscal period for 12 periods.0balance with actuals and 0balance with plan.
But I need to get 0balance with actuals from jan to june(individually for each fiscal period columnwise),and 0balance with plan from july to dec(individually for each fiscal period columnwise).
Hope you people can visualize my report.
Please help me ASAP.
Any kind of help is appreciated.
My mail id is [email protected]
Thanks in advance
Regards
Sam Mathew

Hi Sam,
Did u get this issue solved. I am having the same issue now. Can u please let me know if u have a solution for this.
Thanks
Prasad

Error at the moment to send the report for the printer.

When I execute a report for the Report Builder (Oracle Developer Suite 10g), the report is generated successfully, but, at the moment to send for the printer errors occur: REP-0069/REP-57054/REP-50157 (error 1848).
Please, help me!!!
Nádia

Hi,
We had the same problem at my organization. Our DBA had to install a patch:
To implement the solution, please apply the patchset to upgrade to 10.1.2.2.0.
To obtain a patchset from MetaLink:
1) Click on Patches & Updates.
2) Click on Simple Search
3) Select your product, release and platform.
4) Patch number is 4960210
Description PLACEHOLDER BUG FOR AS/DS 10G R2 PATCH SET 2 10.1.2.2
Product Oracle Development Tools
Release 10.1.2.2
The Patchset 4960210 is a patch for the Application Server AND Developer Suite
5) Read any applicable notes before downloading, then click the Download button.
Note: Please review the Readme file for instructions on how to install the patchset.
you should launch the installer with the executable setup.exe provided in the patchset, it could shows up a message indicating nothing was upgraded, but the release should be modified to 10.1.2.2
Hope that helps

Bootcamp Version 3.1 --List of bug reports for the Development Team to fix.

Similar Messages

Maybe you are looking for