Bootcamp, Windows 7, External Monitor Problem

I am trying to hook my mac up to my 32" JVC monitor. It works perfect on the mac side, but when I turn it over to the windows 7 side there is an issue. If I do 'duplicate these displays', half of the bottom bar is cut off and about half an inch or so of space is cut from all edges. This is not an issue all the time, but it is annoying and it does get in the way on certain occasions. How would I fix this? I have tried the different resolutions, but to no avail, a lot of the space is still cut off. I have tried 'detect' and 'identify', but neither of those work. I've tried going into the nvidia panel, but there is no option to adjust the resolution manually to fit the screen.
The problem isn't so much the resolution. The resolution is perfect and crystal clear! The real problem is that so much gets cut off the edges. Is there any way to manually adjust it to where it needs to be?

Okay, well, I got it to work, but only in single mode (had to disable the actual mac screen).
Is there a way to do this in duplicate/mirrored mode? I know on the mac side everything fits perfectly even in mirrored and everything.

Similar Messages

  • Possibly mundane Mini-DVI to VGA into an external monitor problem

    Hi,
    I've had a look over the interwebs regarding my problem and it seems as if it's not unusual to have external monitor problems but I'm not sure if mine is slightly different:
    I had a perfectly working set up with my new Macbook (the white one, '06 model I believe), that was connected to my Hanns-G HU196D monitor via a mini-DVI to VGA adapter, no problems whatsoever. But for a couple of weeks now my Macbook just flickers a light blue colour, with nothing at all on the monitor, and my macbook is unusable until I remove the adapter. I've read about updating firmware but I can't see my desktop once the macbook is connected to the monitor so it's not possible to configure anything. I've read somewhere that my external monitor isn't compatible with this set up, but it was until a couple of weeks ago!
    My Macbook's 4 months old now and since then I've bought a new mini-dvi to vga adapter and a new VGA cable, no connections seem loose on either mini-dvi port or my monitor's vga port.
    Thanks if you can help!
    Jack

    You will need to use a mini Dvi-dvi and a dvi-svideo/rca adapter.
    Joy joy hallelujah.
    Pardon the sarcasm...I just wasted 3 hours of my life trying to sort the issue out.
    Heard a KWORLD PlusTV PCTOTV Converter SA235 USB 2.0 Interface would sort the issue out for under 40$ but it's not Mac.
    Hope that helps.
    ~r

  • [solved] ThinkPad connect with extern Monitor Problem

    Hello community
    I have installed arch on my T420 integrated HD 3000 and i have the Problem that when i start arch and the boot messages comes i can see the deamon starts ok,ok,ok who should be on the right side but on the NEC they was displayed 5 cm inside. Also when iam on the console and i type dmesg all the output scroll down and broke 5 cm from the roof. And when iam on openbox and i will maximize one window it would be maximized on the size from the Laptop LCD.
    I have made an .xinitrc
    #!/bin/sh
    # ~/.xinitrc
    # Executed by startx (run your window manager from here)
    #xrandr --output DP2 --auto --output LVDS --right-of LVDS
    #xrandr --output DP1 --auto --output LVDS --auto --same-as DP1
    xrandr -d DP2 -s 1900x1200
    if [ -d /etc/X11/xinit/xinitrc.d ]; then
    for f in /etc/X11/xinit/xinitrc.d/*; do
    [ -x "$f" ] && . "$f"
    done
    unset f
    fi
    # exec gnome-session
    # exec startkde
    # exec startxfce4
    and here is my Xorg.0.log
    [ 81.298]
    X.Org X Server 1.12.4
    Release Date: 2012-08-27
    [ 81.298] X Protocol Version 11, Revision 0
    [ 81.298] Build Operating System: Linux 3.4.8-1-ARCH x86_64
    [ 81.298] Current Operating System: Linux bullitt 3.5.4-1-ARCH #1 SMP PREEMPT Sat Sep 15 08:12:04 CEST 2012 x86_64
    [ 81.298] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=7b8780ba-278c-4d61-a1ec-ba2a6f96c6ba ro quiet
    [ 81.299] Build Date: 27 August 2012 08:04:39AM
    [ 81.299]
    [ 81.299] Current version of pixman: 0.26.2
    [ 81.299] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 81.299] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 81.306] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Oct 7 16:33:34 2012
    [ 81.307] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 81.308] (==) No Layout section. Using the first Screen section.
    [ 81.308] (==) No screen section available. Using defaults.
    [ 81.308] (**) |-->Screen "Default Screen Section" (0)
    [ 81.308] (**) | |-->Monitor "<default monitor>"
    [ 81.308] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    [ 81.308] (==) Automatically adding devices
    [ 81.308] (==) Automatically enabling devices
    [ 81.308] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 81.308] Entry deleted from font path.
    [ 81.308] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
    [ 81.308] Entry deleted from font path.
    [ 81.308] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 81.308] Entry deleted from font path.
    [ 81.308] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 81.308] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 81.308] Entry deleted from font path.
    [ 81.308] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 81.308] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/
    [ 81.308] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 81.308] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 81.308] (II) Loader magic: 0x7c8b00
    [ 81.308] (II) Module ABI versions:
    [ 81.308] X.Org ANSI C Emulation: 0.4
    [ 81.308] X.Org Video Driver: 12.1
    [ 81.308] X.Org XInput driver : 16.0
    [ 81.308] X.Org Server Extension : 6.0
    [ 81.308] (--) PCI:*(0:0:2:0) 8086:0126:17aa:21ce rev 9, Mem @ 0xf0000000/4194304, 0xe0000000/268435456, I/O @ 0x00005000/64
    [ 81.308] (II) Open ACPI successful (/var/run/acpid.socket)
    [ 81.308] (II) LoadModule: "extmod"
    [ 81.309] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    [ 81.309] (II) Module extmod: vendor="X.Org Foundation"
    [ 81.309] compiled for 1.12.4, module version = 1.0.0
    [ 81.309] Module class: X.Org Server Extension
    [ 81.309] ABI class: X.Org Server Extension, version 6.0
    [ 81.309] (II) Loading extension MIT-SCREEN-SAVER
    [ 81.309] (II) Loading extension XFree86-VidModeExtension
    [ 81.309] (II) Loading extension XFree86-DGA
    [ 81.309] (II) Loading extension DPMS
    [ 81.309] (II) Loading extension XVideo
    [ 81.309] (II) Loading extension XVideo-MotionCompensation
    [ 81.309] (II) Loading extension X-Resource
    [ 81.309] (II) LoadModule: "dbe"
    [ 81.309] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    [ 81.309] (II) Module dbe: vendor="X.Org Foundation"
    [ 81.309] compiled for 1.12.4, module version = 1.0.0
    [ 81.309] Module class: X.Org Server Extension
    [ 81.309] ABI class: X.Org Server Extension, version 6.0
    [ 81.309] (II) Loading extension DOUBLE-BUFFER
    [ 81.309] (II) LoadModule: "glx"
    [ 81.309] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 81.309] (II) Module glx: vendor="X.Org Foundation"
    [ 81.309] compiled for 1.12.4, module version = 1.0.0
    [ 81.309] ABI class: X.Org Server Extension, version 6.0
    [ 81.309] (==) AIGLX enabled
    [ 81.309] (II) Loading extension GLX
    [ 81.309] (II) LoadModule: "record"
    [ 81.309] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    [ 81.309] (II) Module record: vendor="X.Org Foundation"
    [ 81.309] compiled for 1.12.4, module version = 1.13.0
    [ 81.309] Module class: X.Org Server Extension
    [ 81.309] ABI class: X.Org Server Extension, version 6.0
    [ 81.309] (II) Loading extension RECORD
    [ 81.309] (II) LoadModule: "dri"
    [ 81.309] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    [ 81.309] (II) Module dri: vendor="X.Org Foundation"
    [ 81.309] compiled for 1.12.4, module version = 1.0.0
    [ 81.309] ABI class: X.Org Server Extension, version 6.0
    [ 81.309] (II) Loading extension XFree86-DRI
    [ 81.309] (II) LoadModule: "dri2"
    [ 81.309] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 81.309] (II) Module dri2: vendor="X.Org Foundation"
    [ 81.309] compiled for 1.12.4, module version = 1.2.0
    [ 81.309] ABI class: X.Org Server Extension, version 6.0
    [ 81.309] (II) Loading extension DRI2
    [ 81.309] (==) Matched intel as autoconfigured driver 0
    [ 81.309] (==) Matched vesa as autoconfigured driver 1
    [ 81.309] (==) Matched fbdev as autoconfigured driver 2
    [ 81.309] (==) Assigned the driver to the xf86ConfigLayout
    [ 81.309] (II) LoadModule: "intel"
    [ 81.310] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
    [ 81.310] (II) Module intel: vendor="X.Org Foundation"
    [ 81.310] compiled for 1.12.4, module version = 2.20.9
    [ 81.310] Module class: X.Org Video Driver
    [ 81.310] ABI class: X.Org Video Driver, version 12.1
    [ 81.310] (II) LoadModule: "vesa"
    [ 81.310] (WW) Warning, couldn't open module vesa
    [ 81.310] (II) UnloadModule: "vesa"
    [ 81.310] (II) Unloading vesa
    [ 81.310] (EE) Failed to load module "vesa" (module does not exist, 0)
    [ 81.310] (II) LoadModule: "fbdev"
    [ 81.310] (WW) Warning, couldn't open module fbdev
    [ 81.310] (II) UnloadModule: "fbdev"
    [ 81.310] (II) Unloading fbdev
    [ 81.310] (EE) Failed to load module "fbdev" (module does not exist, 0)
    [ 81.310] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
    965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
    4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
    Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
    Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
    Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
    Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
    Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
    Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2),
    Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2),
    Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2),
    Haswell Server (GT2+), Haswell SDV Desktop (GT1),
    Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+),
    Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
    Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1),
    Haswell SDV Server (GT2), Haswell SDV Server (GT2+),
    Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
    Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1),
    Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+),
    Haswell ULT Server (GT1), Haswell ULT Server (GT2),
    Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1),
    Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+),
    Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2),
    Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1),
    Haswell CRW Server (GT2), Haswell CRW Server (GT2+),
    ValleyView PO board
    [ 81.310] (--) using VT number 7
    [ 81.313] drmOpenDevice: node name is /dev/dri/card0
    [ 81.314] drmOpenDevice: open result is 8, (OK)
    [ 81.314] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
    [ 81.314] drmOpenDevice: node name is /dev/dri/card0
    [ 81.314] drmOpenDevice: open result is 8, (OK)
    [ 81.314] drmOpenByBusid: drmOpenMinor returns 8
    [ 81.314] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
    [ 81.314] drmOpenDevice: node name is /dev/dri/card0
    [ 81.314] drmOpenDevice: open result is 9, (OK)
    [ 81.314] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
    [ 81.314] drmOpenDevice: node name is /dev/dri/card0
    [ 81.314] drmOpenDevice: open result is 9, (OK)
    [ 81.314] drmOpenByBusid: drmOpenMinor returns 9
    [ 81.314] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
    [ 81.314] (II) intel(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    [ 81.314] (==) intel(0): Depth 24, (--) framebuffer bpp 32
    [ 81.314] (==) intel(0): RGB weight 888
    [ 81.314] (==) intel(0): Default visual is TrueColor
    [ 81.314] (--) intel(0): Integrated Graphics Chipset: Intel(R) Sandybridge Mobile (GT2+)
    [ 81.314] (**) intel(0): Relaxed fencing enabled
    [ 81.314] (**) intel(0): Wait on SwapBuffers? enabled
    [ 81.314] (**) intel(0): Triple buffering? enabled
    [ 81.314] (**) intel(0): Framebuffer tiled
    [ 81.315] (**) intel(0): Pixmaps tiled
    [ 81.315] (**) intel(0): 3D buffers tiled
    [ 81.315] (**) intel(0): SwapBuffers wait enabled
    [ 81.315] (==) intel(0): video overlay key set to 0x101fe
    [ 81.315] (II) intel(0): Output LVDS1 has no monitor section
    [ 81.315] (--) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
    [ 81.315] (II) intel(0): Output VGA1 has no monitor section
    [ 81.340] (II) intel(0): Output HDMI1 has no monitor section
    [ 81.380] (II) intel(0): Output DP1 has no monitor section
    [ 81.393] (II) intel(0): Output HDMI2 has no monitor section
    [ 81.406] (II) intel(0): Output HDMI3 has no monitor section
    [ 81.464] (II) intel(0): Output DP2 has no monitor section
    [ 81.506] (II) intel(0): Output DP3 has no monitor section
    [ 81.507] (II) intel(0): EDID for output LVDS1
    [ 81.507] (II) intel(0): Manufacturer: AUO Model: 213e Serial#: 0
    [ 81.507] (II) intel(0): Year: 2010 Week: 33
    [ 81.507] (II) intel(0): EDID Version: 1.4
    [ 81.507] (II) intel(0): Digital Display Input
    [ 81.507] (II) intel(0): 6 bits per channel
    [ 81.507] (II) intel(0): Digital interface is undefined
    [ 81.507] (II) intel(0): Max Image Size [cm]: horiz.: 31 vert.: 17
    [ 81.507] (II) intel(0): Gamma: 2.20
    [ 81.507] (II) intel(0): No DPMS capabilities specified
    [ 81.507] (II) intel(0): Supported color encodings: RGB 4:4:4
    [ 81.507] (II) intel(0): First detailed timing is preferred mode
    [ 81.507] (II) intel(0): Preferred mode is native pixel format and refresh rate
    [ 81.507] (II) intel(0): redX: 0.610 redY: 0.350 greenX: 0.320 greenY: 0.560
    [ 81.507] (II) intel(0): blueX: 0.150 blueY: 0.130 whiteX: 0.313 whiteY: 0.329
    [ 81.507] (II) intel(0): Manufacturer's mask: 0
    [ 81.507] (II) intel(0): Supported detailed timing:
    [ 81.507] (II) intel(0): clock: 110.0 MHz Image Size: 309 x 174 mm
    [ 81.507] (II) intel(0): h_active: 1600 h_sync: 1664 h_sync_end 1706 h_blank_end 2010 h_border: 0
    [ 81.507] (II) intel(0): v_active: 900 v_sync: 903 v_sync_end 906 v_blanking: 912 v_border: 0
    [ 81.507] (II) intel(0): Supported detailed timing:
    [ 81.507] (II) intel(0): clock: 73.3 MHz Image Size: 309 x 174 mm
    [ 81.507] (II) intel(0): h_active: 1600 h_sync: 1664 h_sync_end 1706 h_blank_end 2010 h_border: 0
    [ 81.507] (II) intel(0): v_active: 900 v_sync: 903 v_sync_end 906 v_blanking: 912 v_border: 0
    [ 81.507] (II) intel(0): AUO
    [ 81.507] (II) intel(0): B140RW02 V1
    [ 81.507] (II) intel(0): EDID (in hex):
    [ 81.507] (II) intel(0): 00ffffffffffff0006af3e2100000000
    [ 81.507] (II) intel(0): 21140104901f11780261959c59528f26
    [ 81.507] (II) intel(0): 21505400000001010101010101010101
    [ 81.507] (II) intel(0): 010101010101f82a409a61840c30402a
    [ 81.507] (II) intel(0): 330035ae10000018a51c409a61840c30
    [ 81.507] (II) intel(0): 402a330035ae10000018000000fe0041
    [ 81.507] (II) intel(0): 554f0a202020202020202020000000fe
    [ 81.507] (II) intel(0): 004231343052573032205631200a00d0
    [ 81.507] (II) intel(0): EDID vendor "AUO", prod id 8510
    [ 81.507] (II) intel(0): Printing DDC gathered Modelines:
    [ 81.508] (II) intel(0): Modeline "1600x900"x0.0 110.00 1600 1664 1706 2010 900 903 906 912 -hsync -vsync (54.7 kHz eP)
    [ 81.508] (II) intel(0): Modeline "1600x900"x0.0 73.33 1600 1664 1706 2010 900 903 906 912 -hsync -vsync (36.5 kHz e)
    [ 81.508] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
    [ 81.508] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
    [ 81.508] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
    [ 81.508] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
    [ 81.508] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
    [ 81.508] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
    [ 81.508] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
    [ 81.508] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
    [ 81.508] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
    [ 81.508] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
    [ 81.508] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
    [ 81.508] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
    [ 81.508] (II) intel(0): Printing probed modes for output LVDS1
    [ 81.508] (II) intel(0): Modeline "1600x900"x60.0 110.00 1600 1664 1706 2010 900 903 906 912 -hsync -vsync (54.7 kHz eP)
    [ 81.508] (II) intel(0): Modeline "1600x900"x40.0 73.33 1600 1664 1706 2010 900 903 906 912 -hsync -vsync (36.5 kHz e)
    [ 81.508] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
    [ 81.508] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
    [ 81.508] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
    [ 81.508] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
    [ 81.508] (II) intel(0): EDID for output VGA1
    [ 81.533] (II) intel(0): EDID for output HDMI1
    [ 81.573] (II) intel(0): EDID for output DP1
    [ 81.586] (II) intel(0): EDID for output HDMI2
    [ 81.600] (II) intel(0): EDID for output HDMI3
    [ 81.657] (II) intel(0): EDID for output DP2
    [ 81.657] (II) intel(0): Manufacturer: NEC Model: 67d1 Serial#: 0
    [ 81.657] (II) intel(0): Year: 2011 Week: 33
    [ 81.657] (II) intel(0): EDID Version: 1.4
    [ 81.657] (II) intel(0): Digital Display Input
    [ 81.657] (II) intel(0): 10 bits per channel
    [ 81.657] (II) intel(0): Digital interface is DisplayPort
    [ 81.657] (II) intel(0): Max Image Size [cm]: horiz.: 52 vert.: 32
    [ 81.657] (II) intel(0): Gamma: 2.20
    [ 81.657] (II) intel(0): DPMS capabilities: StandBy Suspend Off
    [ 81.657] (II) intel(0): Supported color encodings: RGB 4:4:4
    [ 81.657] (II) intel(0): First detailed timing is preferred mode
    [ 81.657] (II) intel(0): Preferred mode is native pixel format and refresh rate
    [ 81.657] (II) intel(0): redX: 0.679 redY: 0.310 greenX: 0.210 greenY: 0.686
    [ 81.657] (II) intel(0): blueX: 0.149 blueY: 0.047 whiteX: 0.313 whiteY: 0.329
    [ 81.657] (II) intel(0): Supported established timings:
    [ 81.657] (II) intel(0): 720x400@70Hz
    [ 81.657] (II) intel(0): 640x480@60Hz
    [ 81.657] (II) intel(0): 640x480@67Hz
    [ 81.657] (II) intel(0): 640x480@72Hz
    [ 81.657] (II) intel(0): 640x480@75Hz
    [ 81.657] (II) intel(0): 800x600@56Hz
    [ 81.657] (II) intel(0): 800x600@60Hz
    [ 81.657] (II) intel(0): 800x600@72Hz
    [ 81.657] (II) intel(0): 800x600@75Hz
    [ 81.657] (II) intel(0): 832x624@75Hz
    [ 81.657] (II) intel(0): 1024x768@60Hz
    [ 81.657] (II) intel(0): 1024x768@70Hz
    [ 81.657] (II) intel(0): 1024x768@75Hz
    [ 81.657] (II) intel(0): 1280x1024@75Hz
    [ 81.657] (II) intel(0): 1152x864@75Hz
    [ 81.657] (II) intel(0): Manufacturer's mask: 0
    [ 81.657] (II) intel(0): Supported standard timings:
    [ 81.657] (II) intel(0): #0: hsize: 1280 vsize 720 refresh: 60 vid: 49281
    [ 81.657] (II) intel(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
    [ 81.657] (II) intel(0): #2: hsize: 1400 vsize 1050 refresh: 60 vid: 16528
    [ 81.657] (II) intel(0): #3: hsize: 1360 vsize 765 refresh: 60 vid: 49291
    [ 81.657] (II) intel(0): #4: hsize: 1440 vsize 900 refresh: 60 vid: 149
    [ 81.657] (II) intel(0): #5: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
    [ 81.657] (II) intel(0): #6: hsize: 1680 vsize 1050 refresh: 60 vid: 179
    [ 81.657] (II) intel(0): #7: hsize: 1920 vsize 1200 refresh: 60 vid: 209
    [ 81.657] (II) intel(0): Supported detailed timing:
    [ 81.657] (II) intel(0): clock: 154.0 MHz Image Size: 518 x 324 mm
    [ 81.657] (II) intel(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0
    [ 81.657] (II) intel(0): v_active: 1200 v_sync: 1203 v_sync_end 1209 v_blanking: 1235 v_border: 0
    [ 81.657] (II) intel(0): Ranges: V min: 50 V max: 85 Hz, H min: 31 H max: 92 kHz, PixClock max 165 MHz
    [ 81.657] (II) intel(0): Monitor name: PA241W
    [ 81.657] (II) intel(0): Serial No: 18107120UB
    [ 81.657] (II) intel(0): EDID (in hex):
    [ 81.657] (II) intel(0): 00ffffffffffff0038a3d16700000000
    [ 81.657] (II) intel(0): 21150104b5342078e2de45ad4f35af26
    [ 81.657] (II) intel(0): 0c5054bfef8081c0818090408bc09500
    [ 81.657] (II) intel(0): a940b300d100283c80a070b023403020
    [ 81.657] (II) intel(0): 360006442100001a000000fd0032551f
    [ 81.657] (II) intel(0): 5c10000a202020202020000000fc0050
    [ 81.657] (II) intel(0): 41323431570a202020202020000000ff
    [ 81.657] (II) intel(0): 00313831303731323055420a2020004b
    [ 81.657] (II) intel(0): Printing probed modes for output DP2
    [ 81.657] (II) intel(0): Modeline "1920x1200"x60.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz eP)
    [ 81.657] (II) intel(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
    [ 81.657] (II) intel(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
    [ 81.657] (II) intel(0): Modeline "1680x945"x60.0 131.48 1680 1784 1960 2240 945 946 949 978 -hsync +vsync (58.7 kHz)
    [ 81.657] (II) intel(0): Modeline "1400x1050"x74.9 156.00 1400 1504 1648 1896 1050 1053 1057 1099 -hsync +vsync (82.3 kHz e)
    [ 81.657] (II) intel(0): Modeline "1400x1050"x60.0 121.75 1400 1488 1632 1864 1050 1053 1057 1089 -hsync +vsync (65.3 kHz e)
    [ 81.657] (II) intel(0): Modeline "1600x900"x60.0 118.96 1600 1696 1864 2128 900 901 904 932 -hsync +vsync (55.9 kHz)
    [ 81.657] (II) intel(0): Modeline "1280x1024"x85.0 157.50 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync (91.1 kHz e)
    [ 81.657] (II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
    [ 81.657] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
    [ 81.657] (II) intel(0): Modeline "1440x900"x84.8 157.00 1440 1544 1696 1952 900 903 909 948 -hsync +vsync (80.4 kHz e)
    [ 81.657] (II) intel(0): Modeline "1440x900"x75.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e)
    [ 81.657] (II) intel(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
    [ 81.657] (II) intel(0): Modeline "1280x960"x85.0 148.50 1280 1344 1504 1728 960 961 964 1011 +hsync +vsync (85.9 kHz e)
    [ 81.657] (II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
    [ 81.657] (II) intel(0): Modeline "1360x768"x59.8 84.75 1366 1431 1567 1776 768 771 781 798 -hsync +vsync (47.7 kHz)
    [ 81.657] (II) intel(0): Modeline "1360x768"x60.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz e)
    [ 81.657] (II) intel(0): Modeline "1280x800"x84.9 122.50 1280 1360 1496 1712 800 803 809 843 -hsync +vsync (71.6 kHz e)
    [ 81.657] (II) intel(0): Modeline "1280x800"x74.9 106.50 1280 1360 1488 1696 800 803 809 838 -hsync +vsync (62.8 kHz e)
    [ 81.657] (II) intel(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 +hsync -vsync (49.7 kHz e)
    [ 81.657] (II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
    [ 81.657] (II) intel(0): Modeline "1280x768"x84.8 117.50 1280 1360 1496 1712 768 771 778 809 -hsync +vsync (68.6 kHz e)
    [ 81.657] (II) intel(0): Modeline "1280x768"x74.9 102.25 1280 1360 1488 1696 768 771 778 805 +hsync -vsync (60.3 kHz e)
    [ 81.657] (II) intel(0): Modeline "1280x768"x59.9 79.50 1280 1344 1472 1664 768 771 778 798 -hsync +vsync (47.8 kHz e)
    [ 81.657] (II) intel(0): Modeline "1280x720"x60.0 74.44 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.7 kHz)
    [ 81.658] (II) intel(0): Modeline "1024x768"x85.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz e)
    [ 81.658] (II) intel(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
    [ 81.658] (II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
    [ 81.658] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 81.658] (II) intel(0): Modeline "1024x576"x60.0 46.97 1024 1064 1168 1312 576 577 580 597 -hsync +vsync (35.8 kHz)
    [ 81.658] (II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
    [ 81.658] (II) intel(0): Modeline "800x600"x85.1 56.25 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz e)
    [ 81.658] (II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
    [ 81.658] (II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
    [ 81.658] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 81.658] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
    [ 81.658] (II) intel(0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 +hsync +vsync (31.0 kHz e)
    [ 81.658] (II) intel(0): Modeline "640x480"x85.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz e)
    [ 81.658] (II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
    [ 81.658] (II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
    [ 81.658] (II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
    [ 81.658] (II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 81.658] (II) intel(0): Modeline "720x400"x85.0 35.50 720 756 828 936 400 401 404 446 -hsync +vsync (37.9 kHz e)
    [ 81.658] (II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
    [ 81.658] (II) intel(0): Modeline "640x400"x85.1 31.50 640 672 736 832 400 401 404 445 -hsync +vsync (37.9 kHz e)
    [ 81.658] (II) intel(0): Modeline "640x350"x85.1 31.50 640 672 736 832 350 382 385 445 +hsync -vsync (37.9 kHz e)
    [ 81.700] (II) intel(0): EDID for output DP3
    [ 81.700] (II) intel(0): Output LVDS1 connected
    [ 81.700] (II) intel(0): Output VGA1 disconnected
    [ 81.700] (II) intel(0): Output HDMI1 disconnected
    [ 81.700] (II) intel(0): Output DP1 disconnected
    [ 81.700] (II) intel(0): Output HDMI2 disconnected
    [ 81.700] (II) intel(0): Output HDMI3 disconnected
    [ 81.700] (II) intel(0): Output DP2 connected
    [ 81.700] (II) intel(0): Output DP3 disconnected
    [ 81.700] (II) intel(0): Using exact sizes for initial modes
    [ 81.700] (II) intel(0): Output LVDS1 using initial mode 1600x900
    [ 81.700] (II) intel(0): Output DP2 using initial mode 1600x900
    [ 81.700] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    [ 81.700] (II) intel(0): Kernel page flipping support detected, enabling
    [ 81.700] (**) intel(0): Display dimensions: (310, 170) mm
    [ 81.700] (**) intel(0): DPI set to (131, 134)
    [ 81.700] (II) Loading sub module "fb"
    [ 81.700] (II) LoadModule: "fb"
    [ 81.701] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 81.701] (II) Module fb: vendor="X.Org Foundation"
    [ 81.701] compiled for 1.12.4, module version = 1.0.0
    [ 81.701] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 81.701] (II) Loading sub module "dri2"
    [ 81.701] (II) LoadModule: "dri2"
    [ 81.701] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 81.701] (II) Module dri2: vendor="X.Org Foundation"
    [ 81.701] compiled for 1.12.4, module version = 1.2.0
    [ 81.701] ABI class: X.Org Server Extension, version 6.0
    [ 81.701] (==) Depth 24 pixmap format is 32 bpp
    [ 81.702] (II) intel(0): [DRI2] Setup complete
    [ 81.702] (II) intel(0): [DRI2] DRI driver: i965
    [ 81.702] (II) intel(0): Allocated new frame buffer 1600x900 stride 6656, tiled
    [ 81.704] (II) UXA(0): Driver registered support for the following operations:
    [ 81.704] (II) solid
    [ 81.704] (II) copy
    [ 81.704] (II) composite (RENDER acceleration)
    [ 81.704] (II) put_image
    [ 81.704] (II) get_image
    [ 81.704] (==) intel(0): Backing store disabled
    [ 81.704] (==) intel(0): Silken mouse enabled
    [ 81.704] (II) intel(0): Initializing HW Cursor
    [ 81.704] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [ 81.707] (==) intel(0): DPMS enabled
    [ 81.707] (==) intel(0): Intel XvMC decoder enabled
    [ 81.707] (II) intel(0): Set up textured video
    [ 81.707] (II) intel(0): [XvMC] xvmc_vld driver initialized.
    [ 81.707] (II) intel(0): direct rendering: DRI2 Enabled
    [ 81.707] (==) intel(0): hotplug detection: "enabled"
    [ 82.106] (--) RandR disabled
    [ 82.107] (II) Initializing built-in extension Generic Event Extension
    [ 82.107] (II) Initializing built-in extension SHAPE
    [ 82.107] (II) Initializing built-in extension MIT-SHM
    [ 82.107] (II) Initializing built-in extension XInputExtension
    [ 82.107] (II) Initializing built-in extension XTEST
    [ 82.107] (II) Initializing built-in extension BIG-REQUESTS
    [ 82.107] (II) Initializing built-in extension SYNC
    [ 82.107] (II) Initializing built-in extension XKEYBOARD
    [ 82.107] (II) Initializing built-in extension XC-MISC
    [ 82.107] (II) Initializing built-in extension SECURITY
    [ 82.107] (II) Initializing built-in extension XINERAMA
    [ 82.107] (II) Initializing built-in extension XFIXES
    [ 82.107] (II) Initializing built-in extension RENDER
    [ 82.107] (II) Initializing built-in extension RANDR
    [ 82.107] (II) Initializing built-in extension COMPOSITE
    [ 82.107] (II) Initializing built-in extension DAMAGE
    [ 82.119] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    [ 82.119] (II) AIGLX: enabled GLX_INTEL_swap_event
    [ 82.119] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    [ 82.119] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
    [ 82.119] (II) AIGLX: Loaded and initialized i965
    [ 82.119] (II) GLX: Initialized DRI2 GL provider for screen 0
    [ 82.119] (II) intel(0): Setting screen physical size to 423 x 238
    [ 82.158] (II) config/udev: Adding input device Power Button (/dev/input/event4)
    [ 82.158] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 82.158] (II) LoadModule: "evdev"
    [ 82.159] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 82.159] (II) Module evdev: vendor="X.Org Foundation"
    [ 82.159] compiled for 1.12.3.901, module version = 2.7.3
    [ 82.159] Module class: X.Org XInput Driver
    [ 82.159] ABI class: X.Org XInput driver, version 16.0
    [ 82.159] (II) Using input driver 'evdev' for 'Power Button'
    [ 82.159] (**) Power Button: always reports core events
    [ 82.159] (**) evdev: Power Button: Device: "/dev/input/event4"
    [ 82.159] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 82.159] (--) evdev: Power Button: Found keys
    [ 82.159] (II) evdev: Power Button: Configuring as keyboard
    [ 82.159] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
    [ 82.160] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [ 82.160] (**) Option "xkb_rules" "evdev"
    [ 82.160] (**) Option "xkb_model" "evdev"
    [ 82.160] (**) Option "xkb_layout" "de"
    [ 82.160] (**) Option "xkb_variant" "nodeadkeys"
    [ 82.193] (II) config/udev: Adding input device Video Bus (/dev/input/event12)
    [ 82.193] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    [ 82.193] (II) Using input driver 'evdev' for 'Video Bus'
    [ 82.193] (**) Video Bus: always reports core events
    [ 82.193] (**) evdev: Video Bus: Device: "/dev/input/event12"
    [ 82.193] (--) evdev: Video Bus: Vendor 0 Product 0x6
    [ 82.193] (--) evdev: Video Bus: Found keys
    [ 82.193] (II) evdev: Video Bus: Configuring as keyboard
    [ 82.193] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input12/event12"
    [ 82.193] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
    [ 82.193] (**) Option "xkb_rules" "evdev"
    [ 82.193] (**) Option "xkb_model" "evdev"
    [ 82.193] (**) Option "xkb_layout" "de"
    [ 82.193] (**) Option "xkb_variant" "nodeadkeys"
    [ 82.195] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
    [ 82.195] (II) No input driver specified, ignoring this device.
    [ 82.195] (II) This device may have been added with another device file.
    [ 82.195] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
    [ 82.195] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
    [ 82.195] (II) Using input driver 'evdev' for 'Sleep Button'
    [ 82.195] (**) Sleep Button: always reports core events
    [ 82.195] (**) evdev: Sleep Button: Device: "/dev/input/event3"
    [ 82.195] (--) evdev: Sleep Button: Vendor 0 Product 0x3
    [ 82.195] (--) evdev: Sleep Button: Found keys
    [ 82.195] (II) evdev: Sleep Button: Configuring as keyboard
    [ 82.195] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3/event3"
    [ 82.195] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
    [ 82.195] (**) Option "xkb_rules" "evdev"
    [ 82.196] (**) Option "xkb_model" "evdev"
    [ 82.196] (**) Option "xkb_layout" "de"
    [ 82.196] (**) Option "xkb_variant" "nodeadkeys"
    [ 82.197] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/event1)
    [ 82.197] (**) Logitech USB-PS/2 Optical Mouse: Applying InputClass "evdev pointer catchall"
    [ 82.197] (II) Using input driver 'evdev' for 'Logitech USB-PS/2 Optical Mouse'
    [ 82.197] (**) Logitech USB-PS/2 Optical Mouse: always reports core events
    [ 82.197] (**) evdev: Logitech USB-PS/2 Optical Mouse: Device: "/dev/input/event1"
    [ 82.197] (--) evdev: Logitech USB-PS/2 Optical Mouse: Vendor 0x46d Product 0xc01e
    [ 82.197] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found 12 mouse buttons
    [ 82.197] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found scroll wheel(s)
    [ 82.197] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found relative axes
    [ 82.197] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found x and y relative axes
    [ 82.197] (II) evdev: Logitech USB-PS/2 Optical Mouse: Configuring as mouse
    [ 82.197] (II) evdev: Logitech USB-PS/2 Optical Mouse: Adding scrollwheel support
    [ 82.197] (**) evdev: Logitech USB-PS/2 Optical Mouse: YAxisMapping: buttons 4 and 5
    [ 82.197] (**) evdev: Logitech USB-PS/2 Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 82.197] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input1/event1"
    [ 82.197] (II) XINPUT: Adding extended input device "Logitech USB-PS/2 Optical Mouse" (type: MOUSE, id 9)
    [ 82.197] (II) evdev: Logitech USB-PS/2 Optical Mouse: initialized for relative axes.
    [ 82.197] (**) Logitech USB-PS/2 Optical Mouse: (accel) keeping acceleration scheme 1
    [ 82.197] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration profile 0
    [ 82.197] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration factor: 2.000
    [ 82.197] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration threshold: 4
    [ 82.197] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/mouse0)
    [ 82.197] (II) No input driver specified, ignoring this device.
    [ 82.197] (II) This device may have been added with another device file.
    [ 82.197] (II) config/udev: Adding input device Integrated Camera (/dev/input/event10)
    [ 82.197] (**) Integrated Camera: Applying InputClass "evdev keyboard catchall"
    [ 82.197] (II) Using input driver 'evdev' for 'Integrated Camera'
    [ 82.197] (**) Integrated Camera: always reports core events
    [ 82.197] (**) evdev: Integrated Camera: Device: "/dev/input/event10"
    [ 82.197] (--) evdev: Integrated Camera: Vendor 0x4f2 Product 0xb221
    [ 82.197] (--) evdev: Integrated Camera: Found keys
    [ 82.197] (II) evdev: Integrated Camera: Configuring as keyboard
    [ 82.197] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input10/event10"
    [ 82.197] (II) XINPUT: Adding extended input device "Integrated Camera" (type: KEYBOARD, id 10)
    [ 82.197] (**) Option "xkb_rules" "evdev"
    [ 82.197] (**) Option "xkb_model" "evdev"
    [ 82.197] (**) Option "xkb_layout" "de"
    [ 82.197] (**) Option "xkb_variant" "nodeadkeys"
    [ 82.198] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event13)
    [ 82.198] (II) No input driver specified, ignoring this device.
    [ 82.198] (II) This device may have been added with another device file.
    [ 82.198] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event14)
    [ 82.198] (II) No input driver specified, ignoring this device.
    [ 82.198] (II) This device may have been added with another device file.
    [ 82.198] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event15)
    [ 82.198] (II) No input driver specified, ignoring this device.
    [ 82.198] (II) This device may have been added with another device file.
    [ 82.198] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event16)
    [ 82.198] (II) No input driver specified, ignoring this device.
    [ 82.198] (II) This device may have been added with another device file.
    [ 82.198] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event17)
    [ 82.198] (II) No input driver specified, ignoring this device.
    [ 82.198] (II) This device may have been added with another device file.
    [ 82.198] (II) config/udev: Adding input device HDA Intel PCH Dock Mic (/dev/input/event18)
    [ 82.198] (II) No input driver specified, ignoring this device.
    [ 82.198] (II) This device may have been added with another device file.
    [ 82.198] (II) config/udev: Adding input device HDA Intel PCH Dock Headphone (/dev/input/event19)
    [ 82.198] (II) No input driver specified, ignoring this device.
    [ 82.198] (II) This device may have been added with another device file.
    [ 82.198] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event20)
    [ 82.198] (II) No input driver specified, ignoring this device.
    [ 82.198] (II) This device may have been added with another device file.
    [ 82.199] (II) config/udev: Adding input device HID 046a:0101 (/dev/input/event5)
    [ 82.199] (**) HID 046a:0101: Applying InputClass "evdev keyboard catchall"
    [ 82.199] (II) Using input driver 'evdev' for 'HID 046a:0101'
    [ 82.199] (**) HID 046a:0101: always reports core events
    [ 82.199] (**) evdev: HID 046a:0101: Device: "/dev/input/event5"
    [ 82.199] (--) evdev: HID 046a:0101: Vendor 0x46a Product 0x101
    [ 82.199] (--) evdev: HID 046a:0101: Found keys
    [ 82.199] (II) evdev: HID 046a:0101: Configuring as keyboard
    [ 82.199] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input5/event5"
    [ 82.199] (II) XINPUT: Adding extended input device "HID 046a:0101" (type: KEYBOARD, id 11)
    [ 82.199] (**) Option "xkb_rules" "evdev"
    [ 82.199] (**) Option "xkb_model" "evdev"
    [ 82.199] (**) Option "xkb_layout" "de"
    [ 82.199] (**) Option "xkb_variant" "nodeadkeys"
    [ 82.199] (II) config/udev: Adding input device HID 046a:0101 (/dev/input/event7)
    [ 82.199] (**) HID 046a:0101: Applying InputClass "evdev keyboard catchall"
    [ 82.199] (II) Using input driver 'evdev' for 'HID 046a:0101'
    [ 82.199] (**) HID 046a:0101: always reports core events
    [ 82.199] (**) evdev: HID 046a:0101: Device: "/dev/input/event7"
    [ 82.199] (--) evdev: HID 046a:0101: Vendor 0x46a Product 0x101
    [ 82.199] (--) evdev: HID 046a:0101: Found 1 mouse buttons
    [ 82.199] (--) evdev: HID 046a:0101: Found scroll wheel(s)
    [ 82.199] (--) evdev: HID 046a:0101: Found relative axes
    [ 82.199] (II) evdev: HID 046a:0101: Forcing relative x/y axes to exist.
    [ 82.199] (--) evdev: HID 046a:0101: Found absolute axes
    [ 82.199] (II) evdev: HID 046a:0101: Forcing absolute x/y axes to exist.
    [ 82.199] (--) evdev: HID 046a:0101: Found keys
    [ 82.199] (II) evdev: HID 046a:0101: Configuring as mouse
    [ 82.199] (II) evdev: HID 046a:0101: Configuring as keyboard
    [ 82.199] (II) evdev: HID 046a:0101: Adding scrollwheel support
    [ 82.199] (**) evdev: HID 046a:0101: YAxisMapping: buttons 4 and 5
    [ 82.199] (**) evdev: HID 046a:0101: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 82.199] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.1/input/input7/event7"
    [ 82.199] (II) XINPUT: Adding extended input device "HID 046a:0101" (type: KEYBOARD, id 12)
    [ 82.199] (**) Option "xkb_rules" "evdev"
    [ 82.199] (**) Option "xkb_model" "evdev"
    [ 82.199] (**) Option "xkb_layout" "de"
    [ 82.199] (**) Option "xkb_variant" "nodeadkeys"
    [ 82.199] (II) evdev: HID 046a:0101: initialized for relative axes.
    [ 82.199] (WW) evdev: HID 046a:0101: ignoring absolute axes.
    [ 82.199] (**) HID 046a:0101: (accel) keeping acceleration scheme 1
    [ 82.199] (**) HID 046a:0101: (accel) acceleration profile 0
    [ 82.199] (**) HID 046a:0101: (accel) acceleration factor: 2.000
    [ 82.199] (**) HID 046a:0101: (accel) acceleration threshold: 4
    [ 82.200] (II) config/udev: Adding input device HID 046a:0101 (/dev/input/event8)
    [ 82.200] (**) HID 046a:0101: Applying InputClass "evdev pointer catchall"
    [ 82.200] (II) Using input driver 'evdev' for 'HID 046a:0101'
    [ 82.200] (**) HID 046a:0101: always reports core events
    [ 82.200] (**) evdev: HID 046a:0101: Device: "/dev/input/event8"
    [ 82.200] (--) evdev: HID 046a:0101: Vendor 0x46a Product 0x101
    [ 82.200] (--) evdev: HID 046a:0101: Found 9 mouse buttons
    [ 82.200] (--) evdev: HID 046a:0101: Found scroll wheel(s)
    [ 82.200] (--) evdev: HID 046a:0101: Found relative axes
    [ 82.200] (--) evdev: HID 046a:0101: Found x and y relative axes
    [ 82.200] (II) evdev: HID 046a:0101: Configuring as mouse
    [ 82.200] (II) evdev: HID 046a:0101: Adding scrollwheel support
    [ 82.200] (**) evdev: HID 046a:0101: YAxisMapping: buttons 4 and 5
    [ 82.200] (**) evdev: HID 046a:0101: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 82.200] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.2/input/input8/event8"
    [ 82.200] (II) XINPUT: Adding extended input device "HID 046a:0101" (type: MOUSE, id 13)
    [ 82.200] (II) evdev: HID 046a:0101: initialized for relative axes.
    [ 82.200] (**) HID 046a:0101: (accel) keeping acceleration scheme 1
    [ 82.200] (**) HID 046a:0101: (accel) acceleration profile 0
    [ 82.200] (**) HID 046a:0101: (accel) acceleration factor: 2.000
    [ 82.200] (**) HID 046a:0101: (accel) acceleration threshold: 4
    [ 82.200] (II) config/udev: Adding input device HID 046a:0101 (/dev/input/mouse1)
    [ 82.200] (II) No input driver specified, ignoring this device.
    [ 82.200] (II) This device may have been added with another device file.
    [ 82.200] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    [ 82.200] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [ 82.200] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
    [ 82.200] (**) AT Translated Set 2 keyboard: always reports core events
    [ 82.200] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
    [ 82.200] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
    [ 82.200] (--) evdev: AT Translated Set 2 keyboard: Found keys
    [ 82.200] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
    [ 82.200] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
    [ 82.200] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 14)
    [ 82.200] (**) Option "xkb_rules" "evdev"
    [ 82.200] (**) Option "xkb_model" "evdev"
    [ 82.200] (**) Option "xkb_layout" "de"
    [ 82.200] (**) Option "xkb_variant" "nodeadkeys"
    [ 82.201] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event11)
    [ 82.201] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
    [ 82.201] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
    [ 82.201] (II) LoadModule: "synaptics"
    [ 82.201] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
    [ 82.201] (II) Module synaptics: vendor="X.Org Foundation"
    [ 82.201] compiled for 1.12.2, module version = 1.6.2
    [ 82.201] Module class: X.Org XInput Driver
    [ 82.201] ABI class: X.Org XInput driver, version 16.0
    [ 82.201] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
    [ 82.201] (**) SynPS/2 Synaptics TouchPad: always reports core events
    [ 82.201] (**) Option "Device" "/dev/input/event11"
    [ 82.203] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
    [ 82.203] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5888
    [ 82.203] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4820
    [ 82.203] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
    [ 82.203] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
    [ 82.203] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
    [ 82.203] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
    [ 82.203] (**) Option "TapButton1" "1"
    [ 82.203] (**) Option "TapButton2" "2"
    [ 82.203] (**) Option "TapButton3" "3"
    [ 82.203] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
    [ 82.203] (**) SynPS/2 Synaptics TouchPad: always reports core events
    [ 82.204] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input11/event11"
    [ 82.204] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 15)
    [ 82.204] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
    [ 82.204] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
    [ 82.204] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.036
    [ 82.204] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
    [ 82.204] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
    [ 82.204] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
    [ 82.204] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
    [ 82.204] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
    [ 82.204] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse2)
    [ 82.204] (II) No input driver specified, ignoring this device.
    [ 82.204] (II) This device may have been added with another device file.
    [ 82.204] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event21)
    [ 82.204] (**) TPPS/2 IBM TrackPoint: Applying InputClass "evdev pointer catchall"
    [ 82.204] (II) Using input driver 'evdev' for 'TPPS/2 IBM TrackPoint'
    [ 82.204] (**) TPPS/2 IBM TrackPoint: always reports core events
    [ 82.204] (**) evdev: TPPS/2 IBM TrackPoint: Device: "/dev/input/event21"
    [ 82.204] (--) evdev: TPPS/2 IBM TrackPoint: Vendor 0x2 Product 0xa
    [ 82.204] (--) evdev: TPPS/2 IBM TrackPoint: Found 3 mouse buttons
    [ 82.204] (--) evdev: TPPS/2 IBM TrackPoint: Found relative axes
    [ 82.204] (--) evdev: TPPS/2 IBM TrackPoint: Found x and y relative axes
    [ 82.204] (II) evdev: TPPS/2 IBM TrackPoint: Configuring as mouse
    [ 82.204] (**) evdev: TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
    [ 82.204] (**) evdev: TPPS/2 IBM TrackPoint: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 82.204] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/serio2/input/input21/event21"
    [ 82.204] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE, id 16)
    [ 82.205] (II) evdev: TPPS/2 IBM TrackPoint: initialized for relative axes.
    [ 82.205] (**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
    [ 82.205] (**) TPPS/2 IBM TrackPoint: (accel) acceleration profile 0
    [ 82.205] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000
    [ 82.205] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4
    [ 82.205] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse3)
    [ 82.205] (II) No input driver specified, ignoring this device.
    [ 82.205] (II) This device may have been added with another device file.
    [ 82.205] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
    [ 82.205] (II) No input driver specified, ignoring this device.
    [ 82.205] (II) This device may have been added with another device file.
    [ 82.205] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event9)
    [ 82.205] (**) ThinkPad Extra Buttons: Applying InputClass "evdev keyboard catchall"
    [ 82.205] (II) Using input driver 'evdev' for 'ThinkPad Extra Buttons'
    [ 82.205] (**) ThinkPad Extra Buttons: always reports core events
    [ 82.205] (**) evdev: ThinkPad Extra Buttons: Device: "/dev/input/event9"
    [ 82.205] (--) evdev: ThinkPad Extra Buttons: Vendor 0x17aa Product 0x5054
    [ 82.205] (--) evdev: ThinkPad Extra Buttons: Found keys
    [ 82.205] (II) evdev: ThinkPad Extra Buttons: Configuring as keyboard
    [ 82.205] (**) Option "config_info" "udev:/sys/devices/platform/thinkpad_acpi/input/input9/event9"
    [ 82.205] (II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD, id 17)
    [ 82.205] (**) Option "xkb_rules" "evdev"
    [ 82.205] (**) Option "xkb_model" "evdev"
    [ 82.205] (**) Option "xkb_layout" "de"
    [ 82.205] (**) Option "xkb_variant" "nodeadkeys"
    [ 82.222] (II) intel(0): EDID vendor "AUO", prod id 8510
    [ 82.222] (II) intel(0): Printing DDC gathered Modelines:
    [ 82.222] (II) intel(0): Modeline "1600x900"x0.0 110.00 1600 1664 1706 2010 900 903 906 912 -hsync -vsync (54.7 kHz eP)
    [ 82.222] (II) intel(0): Modeline "1600x900"x0.0 73.33 1600 1664 1706 2010 900 903 906 912 -hsync -vsync (36.5 kHz e)
    [ 82.415] (II) intel(0): Allocated new frame buffer 1920x1200 stride 7680, tiled
    [ 106.807] (II) AIGLX: Suspending AIGLX clients for VT switch
    [ 117.740] (II) Open ACPI successful (/var/run/acpid.socket)
    [ 117.740] (II) AIGLX: Resuming AIGLX clients after VT switch
    [ 117.767] (II) intel(0): EDID vendor "AUO", prod id 8510
    [ 117.767] (II) intel(0): Printing DDC gathered Modelines:
    [ 117.767] (II) intel(0): Modeline "1600x900"x0.0 110.00 1600 1664 1706 2010 900 903 906 912 -hsync -vsync (54.7 kHz eP)
    [ 117.767] (II) intel(0): Modeline "1600x900"x0.0 73.33 1600 1664 1706 2010 900 903 906 912 -hsync -vsync (36.5 kHz e)
    [ 117.959] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
    I have connect my ThinkPad per Dockingstation Displayport (I try also DVI) with an NEC PA241W. It seems arch takes the 1600x900 resolution from the Laptop :-(
    I dont know what to do makes the Kernel the Problem?
    On my second PC i have there an Nvidia when i start arch for install all are perfect on my NEC i connected it with DVI
    here is my xrandr
    [frank@bullitt ~]$ xrandr
    Screen 0: minimum 320 x 200, current 1920 x 1200, maximum 8192 x 8192
    LVDS1 connected 1600x900+0+0 (normal left inverted right x axis y axis) 309mm x 174mm
    1600x900 60.0*+ 40.0
    1024x768 60.0
    800x600 60.3 56.2
    640x480 59.9
    VGA1 disconnected (normal left inverted right x axis y axis)
    HDMI1 disconnected (normal left inverted right x axis y axis)
    DP1 disconnected (normal left inverted right x axis y axis)
    HDMI2 disconnected (normal left inverted right x axis y axis)
    HDMI3 disconnected (normal left inverted right x axis y axis)
    DP2 connected 1920x1200+0+0 (normal left inverted right x axis y axis) 518mm x 324mm
    1920x1200 60.0*+
    1600x1200 60.0
    1680x1050 60.0
    1680x945 60.0
    1400x1050 74.9 60.0
    1600x900 60.0
    1280x1024 85.0 75.0 60.0
    1440x900 84.8 75.0 59.9
    1280x960 85.0 60.0
    1360x768 59.8 60.0
    1280x800 84.9 74.9 59.8
    1152x864 75.0
    1280x768 84.8 74.9 59.9
    1280x720 60.0
    1024x768 85.0 75.1 70.1 60.0
    1024x576 60.0
    832x624 74.6
    800x600 85.1 72.2 75.0 60.3 56.2
    848x480 60.0
    640x480 85.0 72.8 75.0 66.7 60.0
    720x400 85.0 70.1
    640x400 85.1
    640x350 85.1
    DP3 disconnected (normal left inverted right x axis y axis)
    Does anybody have the same kind of connected an Laptop with an external Monitor and knows what was the Problem?
    I like arch very much but so it doesnt make fun :-(
    I hope someone can help me
    the picture shows openbox with the Thunar maximized
    Last edited by kerasi (2012-10-12 23:12:12)

    @trilby
    i use my Laptop at home 95% and at work 5%
    so my first choice would be to have the perfect resolution on my NEC external and when i opened a window it would display there and i dont have to open my Laptop to move the screen to see it on my external or is it so that you must have opened the laptop display to move the windows?
    And when i would take it at work it would be perfect if i see it on the laptop with his resolution 1600x900
    i hope i explained it well.
    @anoknusa
    i change your config to this
    xrandr --output LVDS1 --mode 1600x900 --pos 0x900 --rotate normal --output DP2 --mode 1920x1200 --pos 0x0 --rotate normal
    when i start firefox it was displayes well on my external but when i opened xterm or thunar pcman i have to open my laptop and move from it up to the external do i make a mistake?
    anoknusa wrote:I stuck that in a script to run when I start X; if the external monitor isn't plugged in, only the laptop display is used.  This sets each screen to act as a seperate display; I can still drag windows between them if I wish, as well as assign windows to open on one screen or the other through DWM's configuration file.  As mentioned earlier, this is also the only way (I think) to get each screen to display at its native resolution.  Note that I specify the resolution for both my T520 LCD and my external monitor, and specify their positions (my external is mounted to the wall above my desk, directly above my laptop); change those as necessary.
    what has xrandr to look like for my external monitor and laptop?
    and what would the script look like for me?
    external 1920x1200
    T420 1600x900
    and thank you for your patience and have a nice day
    ps: i know iam very close to find a solution for my problem
    Last edited by kerasi (2012-10-11 00:05:55)

  • External Monitor Problem-Only shows Background

    First off, I am a new mac user and just got a macbook last week. So far the only problem I have occurs when I try to connect it to my PC's Monitor (yes, I have the adaptor). The problem is only the background appears on the Monitor when I plug it in (ya know, the blue wavy thing). Sometimes I get the mouse cursor, but no desktop or dock. The macbook recognizes that there is an external monitor, but it doesn't do anything about it.
    Has anyone had this problem before?

    It sounds to me like normal behavior when the system is set for "extended desktop". In that mode, the second monitor shows a completely different screen then the internal monitor; no menu bars or Dock will appear (that's all still on the primary monitor). That way you can drag windows, pallettes, etc. to the second monitor and clear the internal monitor for other uses.
    If you want both screens to show the same picture, go to the Arrangement tab in the Displays system preference and check the box that says "mirror displays". You can also in that same screen arrange the monitors so that they correct reflect the physical orientation (if you wish); for instance, setting it so that if the external monitor is on the right, you get to it by moving the cursor off the right edge of the main screen.
    Regards.

  • HP 2730p external Monitor problems Intel GMA 4500

    Hi,
    So far I'm really happy with Archlinux on my Laptop (HP 2730p), but I can't get it to work properly with my external monitor
    The monitor (HF287) is detected and connected just fine, but that's about it
    According to the OSD of the monitor it's running with 1680*1050 Pixel (native resolution 1920*1200), no matter what resolution I choose using xrandr or the Systemsettings GUI, but only shows a 1280*1024 area of the actual screen, stretched into 1680*1050. The rest is out of the screen (adjusting the monitor doesn't change anything)
    If I set the the monitor to its native resolution (1920*1200) I only get a image like this:
    This is the external monitor with the default LXDE Background Image and a window reaching into the monitor just a bit
    The same problem occurs in Ubuntu (tested with a liveCD)
    However it works fine using Windows7
    Xrandr output
    Screen 0: minimum 320 x 200, current 1280 x 1024, maximum 8192 x 8192
    LVDS1 connected 1280x800+0+0 (normal left inverted right x axis y axis) 261mm x 163mm
    1280x800 58.5*+
    1024x768 60.0
    800x600 60.3 56.2
    640x480 59.9
    VGA1 connected 1280x1024+0+0 (normal left inverted right x axis y axis) 593mm x 371mm
    1920x1200 60.0 +
    1680x1050 60.0
    1400x1050 60.0
    1280x1024 75.0* 60.0
    1440x900 59.9
    1280x960 60.0
    1152x864 75.0
    1024x768 75.1 70.1 60.0
    832x624 74.6
    800x600 72.2 75.0 60.3 56.2
    640x480 72.8 75.0 66.7 60.0
    720x400 70.1
    DP1 disconnected (normal left inverted right x axis y axis)
    TV1 unknown connection (normal left inverted right x axis y axis)
    848x480 30.0 +
    640x480 30.0 +
    1024x768 30.0
    800x600 30.0
    I have no xorg.conf or any file for the monitor on /etc/X11/xorg.conf.d
    extra/xf86-video-intel is installed and up to date
    However, I've tried following 10-monitor.conf (unsuccessfully):
    Section "Device"
    Identifier "Card0"
    Driver "intel"
    VendorName "Intel Corporation"
    BoardName "Mobile 4 Series Chipset Integrated Graphics Controller"
    BusID "PCI:0:2:0"
    EndSection
    $lspci |grep -i graphics
    00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
    00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
    I hope I have provided enough information and someone can help me to fix this problem.
    Last edited by grayscale (2011-08-30 08:18:20)

    Sorry for reviving this thread from the dead, but I found a workaround and wanted to share it:
    As mentioned on https://bugs.launchpad.net/ubuntu/+sour … bug/796030 this is a known(?) bug with Kernel versions newer than 2.6.34.
    So after downgrading to this version I was able to use the full resolution of the screen, but with a ~ 200pixel wide stripe missing between the monitors (External left of internal => virtual Screen of 3200*1200) and a equally sized stripe of the most left screen on the most right side. This stripe was only missing for the screen, but not for the mousecursor => If I wanted to press a button I had to press it ~200pixel right of it
    (But I was able to use Composite Effects in Compiz)
    This was resolved by disabling Composite in xorg.conf
    not the full xorg.conf
    Section "Extensions"
    Option "Composite" "Disable"
    EndSection

  • Dual / External Monitor Problems

    I have recently purchased a NB200/007 netbook, and wish to use dual monitors (mainly for displaying photos etc on larger screens)
    It came preloaded with Windows 7 starter, after finding out that the Starter edition did not support dual monitor i upgraded to Windows 7 Home Premium, however i am still yet to get this to work.
    When the external monitor is connected, the netbook picks it up and sets up dual monitors, however the external display will not power on (it remains in standby mode) I have tried several different resolutions and also tried to use the external monitor as a single screen by selecting the option to have it as my primary display.
    If anyone has a suggestion of how i could get this to work, i would be greatly appreciative.
    Regards.

    Al-ex,
    Thankyou for your suggestion, however this did not solve the problem.
    It is still like there is no signal getting to the external monitor, even though the netbook itself picks up the monitor.

  • 2011 Macbook Pro External Monitor Problems

    Hi all,
    Looking through some of the threads, it appears that getting macbook pros to work with an external monitors is a big issue.
    I've just bought a phillips 27" monitor and I'm having no luck whatsoever getting my MBP to see it.  I've tried both HDMI and DVI using Apple's own mini adapters, but no matter I do, the monitor fails to detect any kind of signal and goes into sleep mode. 
    I occassionally get the blue screen flicker on my MBP as though it's trying to connect, but the monitor does nothing!!
    I've tried most of the suggestions in other threads, which relate to earlier OSX versions, but nothing has helped.
    I'm running 10.8.4 on a 2.2 GHz Intel Core i7.
    If I fire up my Apple TV, I can use mirroring and the monitor displays my desktop no problem, but the picture quality is poor. So I guess the monitor works. I want to use a bigger screen as I use Logic Pro, so clarity is pretty essential when it comes to picture quality.
    Any help would be most appreciated.
    Best Regards
    Phil

    Hello Phil,
    The following article provides a number of troubleshooting steps that I'd recommend looking into, especially testing with another display if possible, and resetting the MacBook Pro's parameter RAM and SMC.
    Apple computers: Troubleshooting issues with video on internal or external displays
    http://support.apple.com/kb/HT1573
    Cheers,
    Allen

  • External monitor problems after update

    Hello,
    I'm having some difficulties with my external monitor.  I'm using a Phillips 22pfl4505d f7 and the Mini Display Port to VGA adapter.  My Mac is a Mid-2009 Macbook 13" Unibody 2.4 GHz Intel Core 2 Duo 4 GB 1067 MHz DDR3.  Now, ever since I updated to Lion I've been having some issues.  Sometimes (this isn't all the time) when I try to use my monitor, I keep getting a message on my monitor screen "Please change source resolution."  When I cycle through all the resolutions offered by system preferences, the only one that works is the 640x480 option.  Now I mentioned that this doesn't happen all the time, like yesterday everything worked just fine, but when I went to use it today, I keep getting that message.  I updated to Lion last week, and previously to Lion I never got this message and everything worked just fine all the time.  I took a peek at Console (not that I really know what I'm looking for) and kept seeing this error message "8/23/11 6:36:59.211 PM Console: kCGErrorIllegalArgument: CGSGetDisplayBounds: Invalid display 0x43000001" Any ideas about what I should do?
    Thanks
    G

    Sorry please forgive me, I'm so exhausted I posted this in MacBook instead of MacBook Pro, I'll try to move it but if I can't I'll try to copy it and post in MacBook Pro, regardless I think there is a problem with the .11 update.
    Thanks, C

  • External Monitor Problems

    When using an external monitor with my MacBook, all goes well until I "clamshell" the MacBook. Then, using Bluetooth keboard and mouse, all continues to go well but only for a while. Then as I normally scroll and manipulate the mouse complete bodies of text are highlighted and stay that way, the curser fails to move outside the current screen, i.e. to the tool bars, and the only way to stop the problem is to reopen the laptop, in some cases even having to re-boot.
    On the other hand, if I keep the MacBook slightly open all goes well with the external monitor, but this defeats the valuein using it. When I do leave the laptop adjar, I can use either the Blue tooth keyboard, and/or the MacBook key board, or just the normal USB mouse, and all is well.
    Is this an issue inherant with Lion, and is there a fix for it?
    Mike

    ... still no ideas?
    iMac FP 17", 1GHz G4 Mac OS X (10.4.8)

  • External monitor problem macbook pro mid 2012

    Hi everyone i have a really big problem.
    I add a new SSD OWC extreme 6G and a Data Doubler with the original HDD of my macbook pro, i follow all the instructions, i install the latest OSX and install all my apps, till there everything went well and awesome, really fast and i was really happy, but when i connect my external monitor a Samsung SyncMadster T220M my macbook pro freeze but if i disconnet goes back to normal.
    I shutdown and restart, connect again and the same.
    If i shoutdown the mac and connect the monitor and then turn on, the OS does not start and stay loading.
    SSD is the main Hard Drive and the standard HDD is the secondary for DATA
    I follow almost all the advice on http://blog.alutam.com/2012/04/01/optimizing-macos-x-lion-for-ssd/ except the advice only for SSD because i have SSD+HDD
    also i download the app Chameleon SSD Optimiser and turn on everything
    I really need help!!!
    PLEASE HELP!!!
    I USE MY MACBOOK PRO FOR PRESENTATIONS!!!

    I had never heard of "Chameleon SSD Optimiser" but I took a look at it after reading your message... I'm not sure that 'turning everything on' was a wise idea... enabling TRIM is fine, of course. I wouldn't think that 'Chameleon' options would have anything to do with your problem, however.
    What sort of adapter are you using with your Samsung monitor? I would imagine that there is either a hardware fault with the adapter, or with either your Mac port or the port on the monitor.
    Clinton

  • External monitor: problem to enable video output

    Hello,
    I try to use an external monitor.
    I usually use it by a camcorder and a Firewire PAL in FCP without any problem.
    In Color, if I go in User preferences, Video output is set on disabled and the others (for example Digital Cinema preview or Firewire Pal) are all gray and I cannot set them.
    Thank you for your help.

    Luca,
    Please refer to the included documentation. Color does not and will not send external video through firewire to any device, save one, and that is the Aja IO HD and then that device is limited to standard definition video only.
    This "issue" has also been well covered in this and other forums: you need an input/output card manufactured by [Aja|http://www.aja.com/html/products_macintosh.html] or by [Blackmagic Designs|http://www.blackmagic-design.com/products>.

  • Macbook pro with external monitor problem?

    i notice after turning everything on, using an external mouse and monitor, and then CLOSING the macbook pro, logic crashes alot. If I leave the macbook pro open, no crashes. anyone having this problem? no big deal, but it would be nice to be able to close the laptop if I'm using the external monitor and mouse in my main studio, and just using it as a laptop when I'm out on the road.
    thanks
    macbook pro
    OSX 10.4.6
    logic pro 7.2
    apogee mini dac and mini me
    2 gig ram
    7200 rpm HD internal
    7200 rpm Glyph external firewire HD

    that works, although the laptop isn't really close enough to my other monitor for that to make sense. I'd still like to know why it's acting this way.................... thanks for the feedback, though

  • T400 Windows 7 External Monitor issues

    Hello,
    I'm not sure if this is the right place to post this; however its worth a shot after trying for the past 48 hours to figure this out.
    I took the hard drive out of my wifes gateway laptop that had Windows 7 on it and put it in my T400.  After it booted up and all of the drivers got installed everything worked fine except the external monitor (It wont recognize it at all).  
    In the device manager I am getting a code 12 for the Mobile Intel 4 Series Express Chipset Family.  I have pretty much exausted all of the options I can think of and nothing seems to work.  Anyone have any ideas what this issue is or how I can resolve it to use an external monitor?  The device manager is also showing errors for PCI Serial Port and PCI Simple Communication Controller  (not sure if any of these are related to the issue)
    Again, sorry if this isn't the right place for this and thanks for any help!
    Thanks!
    -Mike

    Hi mrosenello, welcome to the forum,
    my guess is that Windows installed generic drivers and not everything is 100% as it should be.  I'd like to suggest that you download, install and run ThinkVantage SystemUpdate which should hopefully then install all the correct drivers you need.
    Please give it a go and let us know how you get on.
    P.S. Moved to a better board
    Andy  ______________________________________
    Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
    Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
      Deutsche Community     Comunidad en Español    English Community Русскоязычное Сообщество
    PepperonI blog 

  • I cannot drag window to external monitor

    Please help, I cannot drag any programs etc to my external monitor.  The monitor is a TV, and connected via HDMI to MDP/thunderbolt on my Macbook Pro Retina 13inch.  I can drag the mouse, but not any programs to the TV display.  Please help

    In Tunes with your iPhone connected and selected, on Summary page check Manually manage music and videos.

  • Bootcamp dvd and external monitor question

    I had parallels before but it does not compare to the boot camp program, Almost everything works great. I do have a couple of issues, The first one is the DVD player, It wont let me play movies it tells me that there is a driver missing(I have win xp) and it dosent play the movies. I also cant use my external monitor on the xp side but works great on the leapord side. Your assistance in this matter would be greatly appreciated, Thank you

    bootcamp drivers for the GPU unit lack that functionality. Instead you can use more recent drivers for your GPU. Before installing any, make sure you uninstall the current one.
    For ATI:
    Alternative 1: Go to http://www.omegadrivers.net/ and download ati driver.
    Alternative 2: Download latest ATI driver for your chipset from ATI but not mobility one. For instance if your GPU is ATI Mobility Radeon X1600, download Radeon X1600 driver from ati. Then mod it with modtool from http://www.driverheaven.net/modtool.php
    For NVIDIA:
    Download your driver from http://www.laptopvideo2go.com/

Maybe you are looking for

  • File Sender Adapter - Throw Alerts

    Hi experts, I've custom a communication channel for the file sender adapter and I'd like to raise alerts in case of technical errors and functional. I managed to do this for functional errors, by alert rules, and runs good. But for technical errors,

  • How to ensure copy

    Oracle 10g and OEL i am taking coldbackup of datafiles,controlfiles,redologfiles,parameter files. after copying using tar -Pcvf make all this files into one file and scp to backup server. i would like to ensure all files are copied during copy proces

  • Passive-interface default on eigrp

    When using the passive-interface default on a router, to advertise networks you have to use the no passive-interface Vlan20, for example, what happens to the following network statements, are they ignored? For example, I have the following config: ro

  • Can saving a form/save as option be password restricted?

    we have problems with people saving forms locally, and then using them still when they are invalid. Short of policy server, is there a script I can throw on a form to restict saving/saving as ? thanks.

  • How to Set Default Printer Just for Safari

    I use 2 printers. One prints paper docs etc.  The other prints labels only.  When i want to print the labels I have to select that printer in the print dialogue in Safari every time.  Super annoying. IS there a way to set a gedault printer just for S