Booting from external Firewire drive--possible?

If I add a USB/Firewire card to my Beige G3 minitower (300MHz), can I then boot from an external Firewire hard drive on which I have installed Panther? A comment by Tina Garfield in another thread seems to suggest this is indeed possible. (I didn't want to "threadjack" that discussion, so I created this new one. I hope Tina sees it and can help me.)
Tina wrote the following:
Having Firewire allows you to have external drives,
which you will be able to boot from, and make
backups and maintenance especially easy.
I was under the impression that the Beige G3 can't see iadd-on Firewire/USB cards until the machine has booted from the internal hard drive. I really hope I am wrong! If it is indeed possible to have the machine recognize the external drive at startup, and there is something I need to do to enable this, please let me know.
Thanks!
GeeKay

Hi GeeKay,
Ditto to everything Grant posted, with an extra reminder to be sure to download XPostFacto 3.1 and not version 4. I believe on the XPF page ( http://eshop.macsales.com/OSXCenter/XPostFacto/Framework.cfm?page=XPostFacto3.ht ml ), the download for 3.1 is a little bit down the page.
If/when you buy an external FW drive be sure it has an Oxford chipset. If the description does not include mention of the the Oxford chipset, I would strongly recommend finding another external drive that does specify this. Our Beiges are very particular about what they will accept for external booting, and the Oxford chipset is a critical component.
Also, I've found, since I do partition my external firewire drives, that I can boot only from the first partition of the external drive, similar to the behavior of our internal drives. In addition, with one of my Beiges, my "helper" disk that I specify to XPostFacto to allow me to boot externally must be the first partition of my internal drive.
I don't believe that you can actually INSTALL to an external drive. I simply cloned my internal drive's system over to the FW drive. This can be done with software such as the free Silverkeeper ( http://www.lacie.com/silverkeeper/ ) or with shareware SuperDuper ( http://www.shirt-pocket.com/ ) which are both great for all backups. I happen to prefer SuperDuper because of its redundancy -- it explains EVERY step before you take it and then, even after you tell it to go ahead, it asks you again to be sure That's what you want to do.
Once set up, however, it is extremely cool, and helpful, to be able to boot externally. If your external drive is dual USB/FW, you will only be able to boot when connected via Firewire. None of the Beiges are USB-bootable.
Hope this helps, and keep us posted,
Tina

Similar Messages

  • Boot from external Firewire Drive-cannot repair or optimize internal drive.

    Hi all
    Connected my new 300 GB Seagate External Firewire Hard Drive today.
    Installed Tiger from DVD. Updated to 10.4.3.
    Installed Tech Tool Pro 4. Updated to 4.1.1.
    Booted from External Firewire Drive.
    Disk Utility cannot Verify or Repair internal drive. Does not say or do anything.
    Tech Tool Pro cannot repair volume or optimize. Says, "Cannot Unmount Volume."
    Is there a fix for this?
    Thank you for the help!
    Jeff
    eMac 800 nVidia.   Mac OS X (10.4.3)   160 GB Internal HD. Pioneer Superdrive. 1 GB RAM.

    Hi
    I did name the new external completely different from the internal.
    After booting from the external Firewire Hard Drive, I tried running Disk Utility and Tech Tool Pro from both drives. No matter which drive I run the Utilities from the same things happen every time...
    Nothing happens when trying to use Disk Utility to Verify Volume on internal eMac Drive.
    Tech Tool Pro says, "Cannot unmount volume" when trying to check Volume or Optimize internal drive.

  • Can WinXP be loaded and booted from external firewire drive?

    The subject line probably says it all but:
    Does the recent firmware upgrade and/or BootCamp allow you to install WinXP on an external Firewire drive rather than partitioning the iMac Core Duo's internal drive?
    Mike
    Intel iMac   Mac OS X (10.4.6)  

    The other problem is XP itself doesn't support booting from firewire. Even if someone could figure out how to install to an external from bootcamp, you would still have to contend with XP.
    Glor

  • IMac 2.8Ghz + booting from external FireWire Drive

    I was wondering if anyone has 'booted' from an external FireWire drive using the FireWire 400 port?
    After going through the issue of reformatting my external drive with the GU-ID partitioning scheme, I found that the drive would mount on the FW400 port but wouldn't boot. In the end I used the FW800 port and the drive booted up first time. On my old PowerBook I could boot from both FW400 & FW800, does anyone know why FW400 doesn't work or is it my iMac?

    If it mounts then you can install OSX or clone OSX and then boot from it. From what you are saying a bootable partition will boot on 400 just not on 800, which is quite odd, I concur.
    Note that they are notorious for needing the right power supply and they all look identical - I had problems of recent with a triple extreme 1 TB on FW 800, and took it to LaCie (a mile from where I work) - they told me I was using the wrong power supply and gave me the right one free. When I got home I did have the right one in a pile with others. 4.2 A vs. 2.2 A and it worked great. And I have a spare free power supply.
    I don't think drivers even enter into it at all with firewire, e.g. drive specific drivers.

  • Stupid question: force booting from external FireWire drive

    My PowerBook is refusing to boot from it's hard drive (flashing ?/folder), which I'll be attempting to repair using DiskWarrior, etc.
    But it's also not finding and booting from the OS X installed on my external FireWire drive (which it could do under normal circumstances). How do I force it to do that given that I'm unable to set the Start Up Volume in the normal manner?
    PowerBook G4 17" 1.5GHz 512MB 80GB   Mac OS X (10.3.6)  

    Dale,
    Thanks for your response. I've been through the usual stuff as in your reference and I eventually got it to boot off the external HD by just leaving it long enough - it took maybe 10-15 minutes. I'm booted from it now. I hadn't thought of using the Startup Manager, but will try to remember next time.
    As for the internal HD, it's looking like it's dead - neither Disk Warrior nor Data Rescue II seem to be able to see it. I tried Disk Utility from the external HD, but it doesn't see it and nor does the Profiler. Maybe it's just a loose connection internally. There is a noise coming from the PB from about just under the division between the left hand rest and the speaker. It sort of sounds like a disk continually being read or written - ie. a sort of very rapid clicking, but I don't think it's the HD. And I don't think it's the fan. Anyone with any ideas before I call AppleCare?
    I did have a very similar problem a few weeks ago (http://discussions.apple.com/message.jspa?messageID=1465680#1465680), but Disk Warrior fixed it apparently with next to no problems. I was going to wipe the drive at the weekend & reinstall, but didn't get round to it in the end ... Fortunately I had a backup this time and was able to restore my user simply by copying it.

  • Panic when booting from external firewire drive

    Hi all
    I have just returned from holidays to the following problem:
    While I was away a colleague upgraded a PowerMac G5 from OS X 10.3 to OS X 10.5.1 . He also upgraded an OS X 10.4 installation on an external firewire drive to 10.4.11 while connected to the G5. Now suddenly the 10.4.11 installation on the external firewire drive will not boot when connected to the PowerMac G5 - it kernel panics almost immediately. However it will still boot when connected to a PowerMac G4.
    Has anybody seen or experienced this? Any ideas?
    Thanks in advance.

    My colleague has just decided to format and recreate the OS installation on the external drive.

  • Booting from external Firewire drive.

    Hello there.
    I got a brand new 17" 2g intel iMac and I'm very happy with it.
    However I missed my 2 internal drives so I bought another firewire drive to make backups, having an emergency system, etc.
    But apparently I can't install a system with this external drive (nor in the second ext. drive I got).
    Is this a common issue? Do I have to do something?
    (I'm using the Installer CD I got with the iMac).

    It is important to note that a traditional APM partition can, in fact, boot an Intel Mac - I have done it on numerous occasions. Specifically,
    - A GUID partition is required to install (new) an Intel version of 10.4.x. If the partition is APM, the installer will not recognize it as bootable and will not allow for installation. In this case, the GUID format is required.
    - an APM partition can be used to boot the Intel as long as it is cloned.
    I've used (and continue to use) Mike Bombich's Carbon Copy Cloner. Despite being a PPC app, it works as expected. I tested this when I first received my Intel iMac since I would inevitably need to use one drive (with multiple partitions of course) to boot a mixture of PPC and Intel Macs at work. As such, I have one external Firewire drive with 3 APM partitions - 1 with 10.3.9 (PPC) for labs that still run Panther, 1 partition with 10.4.x for labs that have upgraded and 1 partition with 10.4.x Intel for the 1 lab where the new Macs are slowly being integrated.

  • Noise when booting from external firewire drive

    When booting from a Maxtor drive with OS10.3.9 to the iMac G5 with Tiger the fan makes a lot of noise. Why?
    When I reboot into Tiger the fan is normal.
    Reasons?
    Thanks

    The fans are controlled by code in the OS you boot from. It sounds like the OS you have on your external Maxtor is older then your iMac G5. As a results it may not have the needed fan control code. When that occurs, the Firmware in the iMac, sets the fans to a high speed to ensure your computer will not overheat.
    Tom N.

  • Problems booting from external firewire drive

    Here's a weird one...
    I'm trying to help a buddy with a 3rd gen MBP and a new WD 'My Studio' firewire external drive.
    He can mount and use the drive but is unable to boot from it. When starting up his machine with option, the drive doesn't show up as selection. The really odd part is the drive does work if plugged in with the USB cable!
    The drive in question DOES work as expected on my 5th gen MBP with firewire. Further, I can stert my MBP in target disc mode and it will function as expected as a bootable external drive for his machine. The system in question was cloned with Carbon Copy Cloner. And again, it boots from my MBP.
    I've tried different sets of cables (even though everything works on my system). I actually had him send the drive back for warranty replacement but of course the new one behaves the same way.
    What could be the cause of apparently certain firewire drives not being bootable (but otherwise working) on a 3rd gen MBP? The intended workflow is to be studio/audio work so using the USB connection for a workaround would not be an option.
    Any clues? Windows is not even installed on any of these machines!

    baltwo wrote:
    FWIW, many WD HDs won't boot Macs and booting Macs isn't supported. Details at their site. That's the main reason I never recommend their crappy HDs.
    Actually I'm very familiar with that list- spent a lot of time looking at this past week! 
    Ironically, the majority of that page is a list of drives which they claim WILL boot Macs.  In fact, the list is entitled "List of Mac-bootable WD external drives..."
    And yep, mine is on there...on the list that reads "The following external hard drives should be bootable on Intel-based Mac computers systems through FireWire (1394a/b)" is "MyBook Studio" as well as my drive model number.
    But that's all beside the point.   Like you, I couldn't recommend their drives at this point.   At least make sure if you buy one that the vendor has a good return policy.
    Dave

  • How to boot from external firewire drive

    Apparently my internal HD on the powerbook has died as it repeatedly gives me the black screen "restart" message and re-install of system software fails.
    I have an external bootable firewire drive, which is a "carbon copy" of my iMac, however, it's SnowLeopard not Leopard, so is there any way I can use the firewire drive to boot off of on the G4 or any other suggestions?
    Also, does anyone know what Apple typically charges to replace the internal drive in the PB G4? I looked at the video for doing it myself and that is not an option for me.
    Thanks!

    The black screen restart message, or kernel panic, can be caused by a number of causes, most which are typically hardware-related, and many times a problem with memory. Try re-seating the memory to see if that makes a difference.
    This is a good read on kernel panics: http://www.thexlab.com/faqs/kernelpanics.html
    If you have the original OS X disks that came with the system, find the first one that should say 'AHT Version x.x' in small print on the label. Insert it and reboot while holding the alt/option key down. Choose the Apple hardware test, and when prompted, choose the extended test. That might give you some additional information on any hardware issue(s).
    You can't use your Snow Leopard bootable drive on the Powerbook, as Snow Leopard requires an Intel-based system.
    If it turns out it is a hard drive issue, be aware that Apple will keep your current hard drive as a trade in on a new drive. Some people have private data on the hard drive and have a concern with it leaving their ownership (even if the drive isn't working).

  • Tiger won't boot from external firewire

    Installed 10.4.3 DVD on clean external firewire (Extended/Journaled). Before I installed Tiger, I ran updates, and repaired permissions. Everything looked good to me.
    I'm keeping Panther on main system drive for now - so from System Preferences>Startup Disk>the external tiger drive appears and I select it. Then I select restart and the promt confirms that the computer will restart with 10.4.3. Looks good so far.
    After restart, I'm looking at the desktop, guess what? It's 10.3.9, not 10.4.3. How could that be?
    Also, when I restart and hold down the Option key for Startup Manager options - the firewire drive does not appear as an option.
    So Tiger appears in System Preferences>Startup Disc as an option, but the option doesn't actually work, and that drive does not appear at all in (Option key) startup manager.
    I'm Indexing the firewire drive now (OMG is that slow or what!), but I'm not expecting this to make any difference. I'm stumped. What am I overlooking? Please advise.
    Muchas Gracias

    R MacCool,
    "What if I manually drag and drop the 4 folders (from the Tiger DVD) onto a second internal SATA drive without partitioning the drive first? Will I be able to boot off an internal SATA drive like that? When I installed Tiger on the external firewire I see that 4 folders are there - I could drag them from that drive onto the second internal drive. Does that work?"
    No, this does not work. MacOS X consists of more then 20,000 invisible files, most of them somehow connected and referencing each other.
    MacOS X DOES boot from external firewire drives, both hard disks and DVD drives.
    Why don't you just upgrade your current 10.3.9 to Tiger using this procedure: 10.4 Tiger Upgrade: Decision tree+Checklist?
    "Why does Tiger seem to install correctly, then System Pref>Startup Disc recognizes it, but then after selecting 10.4.3 it restarts into 10.3.9?"
    I am not a technician, but it could be that the firmware is the primary source for connectivity. After MacOS X has booted the internal firewire drivers might take over and "overrule" the firmware (this is why you can see it in the startup disk preference pane) but at boot-time it exclusively depends on the firmware. This theory might be completely wrong though.

  • Booting from external hard drive on intel-based MacBook Pro

    Good day everyone. I know similar questions were raised in this community, but I still have some questions.
    I have MacBook Pro(late 2011) with OS X 10.7.5 and external hard drive with Ubuntu 13.04, from wich i can boot succefully on my PC. But MacBook Pro will not boot from my external drive, no matter which key/combination i use during restart.
    After googling I found some answers to my initial question, how to boot from external hard drive
    https://discussions.apple.com/thread/1852633?start=0&tstart=0
    http://www.everymac.com/systems/apple/macbook_pro/faq/macbook-pro-boot-from-exte rnal-firewire-or-usb-drive.html
    http://support.apple.com/kb/ht1948
    As I understand I need to format my external hard drive into GUID partition type and this will be enough to be able to boot from it on my mac?
    With this new partition type, will I be able to install ubuntu again on my external drive?
    Does GUID partition type supports NTFS, ext4 and FAT32, linux swap?(I use ntfs for big files, ext4 as partition for ubuntu and fat32, because i use windows, linux and osx)
    Will I be able to boot from my pc from my external drive with this new partition type?
    What are downsides, if any, to GPT?
    here is info on my e-drive

    LowLuster wrote:
    The only OS that will boot from an external drive is Mac OS X or maybe Linux. For OS X to be installed on any drive it need to be formatted Mac OS Extended and have GUID partition table.
    As for Linux I'm not that familiar with it but again for a Mac to boot it need an EFI partition on the drive and I don't think that is possible with NTFS or FAT32 let alone the native Linux format.
    Went to wiki to learn more on efi but found artice on uefi.
    Operating system loaders are a class of the UEFI applications. As such, they are stored as files on a file system that can be accessed by the firmware, called EFI System partition (ESP). Supported file systems include FAT32, FAT16 and FAT12, and supported partition table scheme is GPT only. UEFI does not rely on a boot sector, although ESP provides space for it as part of the backwards compatibility.[26]
    Here is FAQ on official uefi website.
    Can UEFI Secure Boot be adopted and implemented by a variety of operating systems?
    UEFI specifications are platform-independent, supporting multiple platforms and architectures. In addition, UEFI specifications are designed to promote cross-functionality, as well as to support broad adoption across multiple operating systems, including Windows as well as Linux-based operating systems. The specifications are robust and can potentially complement—or even advance—other distributions, such as Linux-based distributions.
    And here is wiki article on GPT expaining OS support.
    It is obvious both uefi and GPT are ok with Linux and file systems such as FAT32, ext4 and NTFS.
    I guess there is no much difference(or is that the same thing?) between uefi and efi used in Macs.
    In your answer to Stark Industries you said that mac can boot linux from external hard drive, well this is not the info i got of official website and it is still my question, because your answer is very inconclusive and your info is partially incorrect

  • Ibook g3 M2453 boot from external DVD drive

    Hi, I'm Simon from Germany.
    I have an iBook M2453 Mac OS X and a lot of dvds.
    But the iBook has no DVD drive. So I bought an external DVD drive. But no matter what I do during boot (press the C key or alt)
    I can not boot from external DVD drive.
    Please help me
    Thank you.
    Simon.
    PS: I have translated the text using Google translate

    Hi Simon,
    the iBook is able to boot from USB, but this is not expected behaviour and not supported by Apple.
    http://support.apple.com/kb/TA20554
    There are some external enclosures that do the trick.
    But only when you press ALT after Power on. (Select a startup volume via the Startup Manager)
    External enclosures with Prolific PL-3507 chipset (Firewire/USB Combo)
    You will find them on Ebay Germany
    I have a Delock IDE>USB 2.0 enclosure for 2,5" HDs
    http://www.delock.com/produkte/gruppen/Geh%C3%A4use/Delock_25_external_enclosure _USB20_42365.html?setLanguage=EN
    that works also.
    Hallo Simon,
    das läuft nur mit einigen wenigen externen Gehäusen. Such auf Ebay nach "PL-3507"
    und nimm eins mit Firewire und USB Anschlüssen.
    Ein Festplattengehäuse von Delock für 2,5" Festplatten ging auch ( Link oben)
    Ein Boot ist nur möglich wenn du die ALT Taste nach dem Einschalten drückst und dann über den Startup manager dein Boot volume auswählst.

  • Booting from a firewire drive with a bluetooth keyboard

    I need to get my computer (iMac G5) to boot from a firewire drive that does have OSX installed on it. I understand from other posts that a bluetooth keyboard will not help seeing as the handshake does not occur until the operating system boots as well. Is there any way to get this to work? I have tried selecting it as the startup disk in System Preferences, but that hasn't seemed to work. I do NOT have a USB keyboard anywhere that I can use (away from home in the boondocks).
    Any ideas?

    Ikrion wrote:
    I need to get my computer (iMac G5) to boot from a firewire drive that does have OSX installed on it. I understand from other posts that a bluetooth keyboard will not help seeing as the handshake does not occur until the operating system boots as well. Is there any way to get this to work? I have tried selecting it as the startup disk in System Preferences, but that hasn't seemed to work. I do NOT have a USB keyboard anywhere that I can use (away from home in the boondocks).
    Does System Preferences allow you to select the FW drive as the start up volume? If so, you then press the button to restart, correct? What exactly happens after that?
    What version of OS X do you have on the iMac (ii) the FW drive?
    Have you booted from the FW before? What kind of drive is it? How did you install OS X on it?
    If the FW and iMac have the same version of OS X on, try this:
    open /Applications/Utilities/Disk Utility
    select the FW drive at the left
    choose "repair disk"
    choose "repair permissions"
    Try again.
    - cfr

  • Cannot boot Snow Leopard from external FireWire drive

    I use a Western Digital My Passport Studio 500 GB external drive to back up my MacBook Pro with Time Machine. I had created a 30 GB Leopard boot partition with various utilities and tools; since the small drive goes wherever the laptop goes, I figured it might come in handy to be able to boot the computer in the event something went wrong with its internal 250 GB drive.
    Over the weekend, I upgraded the external drive to Snow Leopard, and now it can no longer be used to boot the laptop. The symptoms are truly weird. Holding down the Option key while rebooting does not show the external drive unless I disconnect and reconnect the FireWire cable. The drive then shows up. I select it, and it appears to begin to boot, then it just sits on the gray screen with the little round thingie turning for a long time (five to ten minutes). Eventually, the system boots from its internal drive. This happens regardless of whether I'm connected by means of FireWire 400 or 800.
    After spending a lot of time looking at the usual suspects (cables, permissions, PRAM, etc.) I reinstalled Sand Leopard (OK, 10.5) and lo and behold, the drive boots again (though for some reason I still have to go through the disconnect/reconnect routine). Clearly, something in the OS has changed with respect to the way booting from external drives is handled.
    On the positive side, I have none of the symptoms described in other threads: Time Machine works flawlessly, and both the boot partition and the Time Machine partition appear on the Snow Leopard desktop every time I connect the drive.
    Does anyone have the same issues? Does anyone know of a workaround?
    Thanks,
    Daniel

    Hi,
    Working from a MacBook Pro 2.4 (Santa Rosa) with 4gb ram, running OS 10.5.7-
    (All external HDs are 7200 rpm)
    Shortly after our fresh install of Snow Leopard onto a new but already tested External 1.5 Seagate Barracuda (with the most current firmware), in an OWC Mercury Elite enclosure-
    We installed Snow Leopard smoothly to that external HD without any issues, and it booted up from that 1.5T external HD, and worked fine.
    Then, still working from the MacBook Pro, I turned on and booted another external HD (a Newertech Guardian Maximus RAID running 10.4.11 via FW800, daisy chained to the 1.5T External with Snow Leopard newly installed.
    Again that's MacBook Pro <FW800> Snowy external HD <FW800> 10.4.11 RAID (booted & working from the RAID).
    But when I tried to bootup up Snow Leopard, after doing the work on the 10.4.11 RAID-
    It would not boot up.
    Though Snowy would appear as an available Start Up disk, each time it was selected as the Boot drive,
    the Internal HD OS 10.5.7 booted instead.
    I changed around the cables and tried repeatedly.
    Same result, no Snowy boot.
    Even after the OS 10.4.11 external RAID was power down, and disconnected.
    After some looking around, I found this forum:
    http://discussions.apple.com/thread.jspa?threadID=2136208&tstart=0
    Got me thinking.
    I tried the USB, and it booted !
    I tried the FW400, and it booted !
    And mysteriously, at this point- I tried the FW800, and it booted !
    And then, the MBP boots seemed to reliably boot from that external, via FW800.
    Bizarre.
    Snow Cat needs to be taught originally how to find FW800 from the bottom up ?
    Turns out, Snow Leopard doesn't like booting,
    if the preceding boot was on the 10.4.11 RAID, and work was done with programs there.
    So, once again, I repeated this process:
    After working with programs on the 10.4.11 external HD,
    the MBP would not boot the Snow Leopard external HD,
    it defaulted to booting from the MBP internal HD OS 10.5 via FW800.
    even though Snowy was selected for Start Up.
    This was the case repeatedly.
    (It would also boot from the 10.4.11 external RAID, if it were selected for Start Up.)
    (In each of these tests below, I only rebooted the computer at each test. I did no work with programs on the various HDs.)
    SO, once again, at this point of the process:
    I plugged in that Snowy external HD via FW400,
    and it booted up fine !
    Then I booted up from the Internal 10.5, and tried to boot Snowy via FW800 again.
    It worked !
    Then I turned on the 10.4.11 RAID external HD, and tried to reboot from the Snowy external HD.
    It worked too !
    Then I booted from the 10.4.11 RAID, it came up fine.
    Then booted from the Snowy, it came up fine.
    Then booted from the Internal HD 10.5, it came up fine.
    Then booted from Snowy again, it came up fine.
    Then I turned off the 10.4.11 HD, booted from Snowy, it came up fine.
    Then booted from the Internal, it came up fine.
    Then tried Snowy one last time, it came up fine.
    Anyway, the issue is:
    It works fine-
    Except when I do work within the programs on the 10.4.11 external RAID.
    Then I have to use FW400 or USB to get it to boot once again . . .
    Regardless of whether the other external HD is removed from the system.
    It's some sort of flaw, and totally repeatable in testing.
    Hopefully, it will be fixed soon.
    Howard

Maybe you are looking for

  • How do I take someone else's iTunes account off my computer

    I helped my brother with his iphone a few weeks ago and he authorized my computer for his account so we could change some of his songs and what not but it synced his apps to my computer, ive deleted them and moved on cause I didnt have an iphone. Wel

  • ICal bug subscribing/publishing between Leopard and Tiger?

    It seems there is a strange incompatibility between iCal 2.0.5 (Tiger) and iCal 3.0 (Leopard). I work for a company where 10 employees share their calendars through a private server. Everyone publishes his/her calendar and is subscribed to all the ot

  • Mac OS X 10.4.8 adds EAP-FAST support

    From the release notes of Mac OS X 10.4.8 update: http://docs.info.apple.com/article.html?artnum=304200 - Improves security by adding support for EAP-FAST for AirPort wireless authentication.

  • Not able to receive photos on iPad mini

    Hi I have an iPad mini running 8.3 and the Skype version 4.19 When I receive photos it just gives me a link to login in to my Skype account outside the app. Is there a fix for this? Thanks

  • Error while entering into password management page in OIM 11g

    Hi , Whenever i trying to set a new password in OIM(Password Management page) as a newly created user, i got the following error. <Error> <oracle.iam.ChangePasswordtaskflow.logging> <BEA-000000> <Old password is invalid> Any one pls suggest me ...