Booting from usb disk

hello
I'm new in solaris and I need help very much.
I installed Solaris 10 for x86 on external 3.5'' usb HD but on boot it hangs and a perpetual black screen appears.I've read about usb legacy and I disabled it but now BIOS doesn't see usb disk.
I tried to install grub on a floppy disk; however if legacy is disabled grub start but disk partition is not found(obviously); if I enable legacy disk is seen but i get error "Selected item cannot fit in memory".
I searched Sun site and the net for other infos but nothing;it seems no people had my same problem.
My PC has an athlon64 3200(I've alo updated BIOS) 1 GB ram and a Maxtor SATA HD with WinXP.
ps: Initially I wanted installing on sata HD but solaris doesn't see it and I didn't find sata drivers for it.
PLEASE help me.

Thanks for your effort!!
I deleted solaris and I'll continue to use Debian

Similar Messages

  • Boot from USB disk fails

    goal:
    I would like to boot from a USB pendrive
    specs:
    MSI K8N neo platinum (bios 1.4/1.56)
    Transcend jetflash 256MB
    problem:
    The system does not boot from the disk
    what i tried:
     i made the usb stick bootable in 2 differend ways:
      - i used the included software to make it bootable
      - i used mkbt.exe to make a bootrecord
    i updated the bios from 1.4 to 1.56
    i did try to boot with the F11 option
    i did set the primary boot order to USB-ZIP and i also tryed USB-FDD and USB-HDD
    i also enabled the USB storage device in the bios
    i tried to get the USB stick as a disk drive while booting from a disk, which also failed
    is there anyone who have a idea how-to make it bootable?
    i'm kinda out of idea's

    what more specs do you want?
    specs:
    MSI K8N neo platinum (bios 1.4/1.56)
    Transcend jetflash 256MB
    AMD 64 3200+
    Zalman cooler
    2 512 Kingston memory
    2 Maxtor HD
    2 CD/DVD drives
    ATI 9600 VGA card
    i would like to boot from a pendrive for various reasons, but mostly because i would like to boot in Dos or Linux.

  • Boot from USB disk?

    Hello,
    My iMac monitor crashed and burned but the computer has a new hard disk in it with a lot of iTunes TV shows and movies. Is it possible to put this disk in an external USB 2.0 enclosure and then boot from it with my MacBook. Would USB 2.0 be fast enough to play the media from the disk. Looking for a cheap fix to hold me over until I get a new iMac.
    Sorry if this is a blatantly stupid question.
    Thanks,
    Eric

    Well... you have two issues there.
    1) Can you boot from an external USB drive. The answer is yes. Just hold down the "Option" key on your MacBook and you will get little icons of the drives you can boot from. You would just click (using the trackpad button... tapping doesn't work here)on the drive you want to boot from and you're good to go.
    2) Can you use the drive from your iMac in an external enclosure to boot on your MacBook. That's probably a no. It "may" boot, but you may experience unexpected behavior... or it may just freeze during boot up. The OS on the drive is configured for the hardware on your iMac and it won't be happy with what it finds on your MacBook.
    However, you don't need to boot using the drive in order to do what you want. You can just boot the MacBook normally and connect the external drive and access all the data on it just as if it were any other external drive. I dont' see any real benefit for you to be booting from the external drive for what you are trying to do. Also... as you sort of pointed out... USB is much slower than your internal SATA interface. Even with a properly configured external drive, the boot time is significantly slower when used over USB.

  • 10-K010CA laptop cannot boot from USB

    I try everything ( update BIOS, disable securiy boot, setup usb boot first ).  But the laptop will not boot any other USB disk except the Recovery USB Disk create by the laptop.
    I had a few USB Disk ( windows 7,  linux ) which boot normally on HP Desktop PC which set to boot UEFI  but will not boot from this laptop.
    Will this laptop able to boot from USB Disk at all?

    Hi there @azure-cheng 
    Welcome to the HP Support Forums! It is a great place to find the help you need, both from other users, HP experts and other support personnel.
    I understand that you are trying to boot from media that will work on your desktop. I am happy to help with this.
    Please post the full product number for your notebook. See the following, if you need help with that information.
    How Do I Find My Model Number or Product Number?
    Are all of these bootable media UEFI, or is there a mix, of UEFI and legacy?
    Have you tried setting your notebook to legacy boot?
    Malygris1
    I work on behalf of HP
    Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
    Click Kudos Thumbs Up on the right to say “Thanks” for helping!

  • Does KT880 boot from USB Flash Disk?

    Does KT880 boot from USB Flash Disk?
    Your real experience?

    I would like to buy this board.
    So that is why I am searching for proved experience.

  • Multiple errors attempting to capture a Windows 8 reference image after booting from USB (Dell Latitude 10)

    From results.xml:
    <?xml version="1.0"?>
    <Results><Errors>8</Errors><Warnings>0</Warnings><RetVal>-2147467259</RetVal><DeploymentType>CUSTOM</DeploymentType><Messages><![CDATA[FAILURE ( 5456 ): Unable to determine Destination Disk, Partition, and/or Drive. See BDD.LOG for more information.
    Litetouch deployment failed, Return Code = -2147467259 0x80004005
    Failed to run the action: Apply Windows PE.
    Unknown error (Error: 00001550; Source: Unknown)
    The execution of the group (Capture Image) has failed and the execution has been aborted. An action failed.
    Operation aborted (Error: 80004004; Source: Windows)
    Failed to run the last action: Apply Windows PE. Execution of task sequence failed.
    Unknown error (Error: 00001550; Source: Unknown)
    Task Sequence Engine failed! Code: enExecutionFail
    Task sequence execution failed with error code 80004005
    Error Task Sequence Manager failed to execute task sequence. Code 0x80004005]]></Messages></Results>
    I have not only regenerated my boot files while updating my deployment share, I have completely rebuilt the MDT 2012 deployment share from scratch, and I'm still getting the exact same errors. I can't figure out what is causing this. The only hits for these
    errors seemed to say that the -214... error is likely related to a missing file, but I don't know how to figure out what that might be. I don't know what the FAILURE ( 5456 ) could be caused by, either, although it seems to be related to not knowing what partition
    should be imaged or imaged to. I haven't been able to find any reference to MDT needing a partition to image from/to set in a CS.ini property or in a task variable.
    I am running a modified version of the Sysprep and Capture Task Sequence (set up as described at http://bjtechnews.org/2012/06/01/mdt-2012-capturing-a-reference-image-part-ii/, it's basically the default settings for that TS with the sysprep step disabled and
    the "Set Image Folder" task variable created per that post--I ran sysprep myself, manually, on the machine before shutting it down to boot from USB) after booting a Dell Latitude 10 tablet from a USB drive created by extracting the contents of the
    MDT 2012 DeploymentShare$\Boot\LiteTouchpe_x86.iso to a FAT32-formatted volume.

    Here is the second part of BDD.log:
    <![LOG[VSSMaxSize not specified using 5% of volume.]LOG]!><time="21:18:42.000+000" date="07-23-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
    <![LOG[Logs contained 8 errors and 0 warnings.]LOG]!><time="21:18:42.000+000" date="07-23-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
    <![LOG[No Windows PE image to delete.]LOG]!><time="21:18:42.000+000" date="07-23-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
    <![LOG[Stripping BDD commands from unattend.xml template.]LOG]!><time="21:18:42.000+000" date="07-23-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
    <![LOG[Modified unattend.xml saved to C:\windows\panther\unattend.xml]LOG]!><time="21:18:42.000+000" date="07-23-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
    <![LOG[Checking mapped network drive.]LOG]!><time="21:18:43.000+000" date="07-23-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
    <![LOG[testing drive Z: mapped to \\NCSD-WDS\DeploymentShare$]LOG]!><time="21:18:43.000+000" date="07-23-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
    <![LOG[Disconnecting drive Z: mapped to \\NCSD-WDS\DeploymentShare$]LOG]!><time="21:18:43.000+000" date="07-23-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
    <![LOG[testing drive Y: mapped to \\ncsd-wds.ncsd.local\deploymentshare$]LOG]!><time="21:18:43.000+000" date="07-23-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
    <![LOG[Cleaning up C:\MININT directory.]LOG]!><time="21:18:43.000+000" date="07-23-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
    <![LOG[Cleaning up TOOLS, SCRIPTS, and PACKAGES directories.]LOG]!><time="21:18:43.000+000" date="07-23-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
    <![LOG[Removing C:\MININT folder (final log entry)]LOG]!><time="21:18:44.000+000" date="07-23-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
    <![LOG[Not Wizard = False]LOG]!><time="00:44:05.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Property WizardComplete is now = N]LOG]!><time="00:44:07.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[ Open Control File: TaskSequences]LOG]!><time="00:44:08.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[CleanStartItems Complete]LOG]!><time="00:53:55.000+000" date="07-24-2013" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Removing C:\MININT folder (final log entry)]LOG]!><time="00:53:55.000+000" date="07-24-2013" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[ZTIUtility!GetAllFixedDrives (False)]LOG]!><time="00:53:55.000+000" date="07-24-2013" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[New ZTIDisk : \\MININT-IDKMK2C\root\cimv2:Win32_DiskDrive.DeviceID="\\\\.\\PHYSICALDRIVE0"]LOG]!><time="00:53:55.000+000" date="07-24-2013" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[New ZTIDisk : \\MININT-IDKMK2C\root\cimv2:Win32_DiskDrive.DeviceID="\\\\.\\PHYSICALDRIVE0"]LOG]!><time="00:53:55.000+000" date="07-24-2013" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[New ZTIDiskPartition : \\MININT-IDKMK2C\root\cimv2:Win32_DiskPartition.DeviceID="Disk #0, Partition #2" \\MININT-IDKMK2C\root\cimv2:Win32_LogicalDisk.DeviceID="C:"]LOG]!><time="00:53:55.000+000" date="07-24-2013" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[New ZTIDisk : \\MININT-IDKMK2C\root\cimv2:Win32_DiskDrive.DeviceID="\\\\.\\PHYSICALDRIVE0"]LOG]!><time="00:53:56.000+000" date="07-24-2013" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[New ZTIDiskPartition : \\MININT-IDKMK2C\root\cimv2:Win32_DiskPartition.DeviceID="Disk #1, Partition #0" \\MININT-IDKMK2C\root\cimv2:Win32_LogicalDisk.DeviceID="D:"]LOG]!><time="00:53:56.000+000" date="07-24-2013" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[New ZTIDisk : \\MININT-IDKMK2C\root\cimv2:Win32_DiskDrive.DeviceID="\\\\.\\PHYSICALDRIVE1"]LOG]!><time="00:53:56.000+000" date="07-24-2013" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[ZTIUtility!GetAllFixedDrives = C:]LOG]!><time="00:53:56.000+000" date="07-24-2013" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Not Wizard = False]LOG]!><time="00:54:54.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Property WizardComplete is now = N]LOG]!><time="00:54:55.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[ Open Control File: TaskSequences]LOG]!><time="00:54:56.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Property TaskSequenceID is now = CAPTURE001]LOG]!><time="00:55:00.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Found Task Sequence Item: //step[@type='BDD_InstallOS']]LOG]!><time="00:55:01.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Found Task Sequence step of type //step[@type='BDD_InstallOS'] = False]LOG]!><time="00:55:01.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Task Sequence does not contain an OS and does not contain a LTIApply.wsf step, possibly a Custom Step or a Client Replace.]LOG]!><time="00:55:01.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[DeploymentType = CUSTOM]LOG]!><time="00:55:01.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Property ImageProcessor is now = ]LOG]!><time="00:55:02.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Property OSGUID is now = ]LOG]!><time="00:55:02.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Property TaskSequenceName is now = Capture reference image]LOG]!><time="00:55:02.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Property TaskSequenceVersion is now = 1.0]LOG]!><time="00:55:02.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Property TaskSequenceTemplate is now = CaptureOnly.xml]LOG]!><time="00:55:02.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Property OSGUID is now = {9c976969-ab45-405b-82e7-d8a429228a67}]LOG]!><time="00:55:03.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Property ImageIndex is now = 1]LOG]!><time="00:55:03.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Property ImageSize is now = 7934]LOG]!><time="00:55:03.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Property ImageFlags is now = Professional]LOG]!><time="00:55:03.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Property ImageBuild is now = 6.2.9200.16384]LOG]!><time="00:55:03.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Property ImageProcessor is now = x86]LOG]!><time="00:55:04.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Property ImageLanguage001 is now = en-US]LOG]!><time="00:55:04.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[InstallFromPath: \\NCSD-WDS\Latitude10Deploy$\Operating Systems\Windows 8 Pro x86\Sources\install.wim]LOG]!><time="00:55:04.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Property InstallFromPath is now = \\ncsd-wds\latitude10deploy$\Operating Systems\Windows 8 Pro x86\sources\install.wim]LOG]!><time="00:55:04.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[SourcePath: \\NCSD-WDS\Latitude10Deploy$\Operating Systems\Windows 8 Pro x86]LOG]!><time="00:55:04.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Property SourcePath is now = \\NCSD-WDS\Latitude10Deploy$\Operating Systems\Windows 8 Pro x86]LOG]!><time="00:55:05.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Found Task Sequence Item: //step[@type='BDD_InstallRoles']]LOG]!><time="00:55:05.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Found Task Sequence step of type //step[@type='BDD_InstallRoles'] = ]LOG]!><time="00:55:05.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Found Task Sequence Item: //step[@type='BDD_InstallApplication' and ./defaultVarList/variable[@name='ApplicationGUID'] and ./defaultVarList[variable='']]]LOG]!><time="00:55:05.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Found Task Sequence step of type //step[@type='BDD_InstallApplication' and ./defaultVarList/variable[@name='ApplicationGUID'] and ./defaultVarList[variable='']] = ]LOG]!><time="00:55:06.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Found Task Sequence Item: //step[@name='Create WIM']]LOG]!><time="00:55:06.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Found Task Sequence step of type //step[@name='Create WIM'] = True]LOG]!><time="00:55:06.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Found Task Sequence Item: //step[@name='Create WIM']]LOG]!><time="00:55:19.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Found Task Sequence step of type //step[@name='Create WIM'] = True]LOG]!><time="00:55:19.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Validating connection to \\NCSD-WDS\Latitude10Deploy$\Captures]LOG]!><time="00:55:32.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Already connected to server NCSD-WDS as that is where this script is running from.]LOG]!><time="00:55:33.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Property TSGuid is now = {ed8ed1ac-ab1a-448d-97b5-0d4cb1f7ef95}]LOG]!><time="00:55:38.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Property OSGUID is now = ]LOG]!><time="00:55:39.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Property DeploymentType is now = CUSTOM]LOG]!><time="00:55:39.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[<Message containing password has been suppressed>]LOG]!><time="00:55:39.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Property DoCapture is now = YES]LOG]!><time="00:55:39.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Property ComputerBackupLocation is now = \\NCSD-WDS\Latitude10Deploy$\Captures]LOG]!><time="00:55:39.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Property BackupFile is now = CAPTURE001.wim]LOG]!><time="00:55:40.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Property WizardComplete is now = Y]LOG]!><time="00:55:40.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Setting variable ComputerBackupLocation to value \\ncsd-wds.ncsd.local\Latitude10Deploy$\Captures]LOG]!><time="00:55:45.000+000" date="07-24-2013" component="ZTISetVariable" context="" type="1" thread="" file="ZTISetVariable">
    <![LOG[Property ComputerBackupLocation is now = \\ncsd-wds.ncsd.local\Latitude10Deploy$\Captures]LOG]!><time="00:55:45.000+000" date="07-24-2013" component="ZTISetVariable" context="" type="1" thread="" file="ZTISetVariable">
    <![LOG[ZTISetVariable processing completed successfully.]LOG]!><time="00:55:45.000+000" date="07-24-2013" component="ZTISetVariable" context="" type="1" thread="" file="ZTISetVariable">
    <![LOG[Event 41001 sent: ZTISetVariable processing completed successfully.]LOG]!><time="00:55:46.000+000" date="07-24-2013" component="ZTISetVariable" context="" type="1" thread="" file="ZTISetVariable">
    <![LOG[Setting variable ImageBuild to value 6.2.9200]LOG]!><time="00:55:47.000+000" date="07-24-2013" component="ZTISetVariable" context="" type="1" thread="" file="ZTISetVariable">
    <![LOG[Property ImageBuild is now = 6.2.9200]LOG]!><time="00:55:47.000+000" date="07-24-2013" component="ZTISetVariable" context="" type="1" thread="" file="ZTISetVariable">
    <![LOG[ZTISetVariable processing completed successfully.]LOG]!><time="00:55:47.000+000" date="07-24-2013" component="ZTISetVariable" context="" type="1" thread="" file="ZTISetVariable">
    <![LOG[Event 41001 sent: ZTISetVariable processing completed successfully.]LOG]!><time="00:55:48.000+000" date="07-24-2013" component="ZTISetVariable" context="" type="1" thread="" file="ZTISetVariable">
    <![LOG[Setting variable ImageFlags to value %OSSKU%]LOG]!><time="00:55:49.000+000" date="07-24-2013" component="ZTISetVariable" context="" type="1" thread="" file="ZTISetVariable">
    <![LOG[Property ImageFlags is now = %OSSKU%]LOG]!><time="00:55:49.000+000" date="07-24-2013" component="ZTISetVariable" context="" type="1" thread="" file="ZTISetVariable">
    <![LOG[ZTISetVariable processing completed successfully.]LOG]!><time="00:55:49.000+000" date="07-24-2013" component="ZTISetVariable" context="" type="1" thread="" file="ZTISetVariable">
    <![LOG[Event 41001 sent: ZTISetVariable processing completed successfully.]LOG]!><time="00:55:50.000+000" date="07-24-2013" component="ZTISetVariable" context="" type="1" thread="" file="ZTISetVariable">
    <![LOG[Setting variable PHASE to value STATERESTORE]LOG]!><time="00:55:51.000+000" date="07-24-2013" component="ZTISetVariable" context="" type="1" thread="" file="ZTISetVariable">
    <![LOG[Property PHASE is now = STATERESTORE]LOG]!><time="00:55:51.000+000" date="07-24-2013" component="ZTISetVariable" context="" type="1" thread="" file="ZTISetVariable">
    <![LOG[ZTISetVariable processing completed successfully.]LOG]!><time="00:55:51.000+000" date="07-24-2013" component="ZTISetVariable" context="" type="1" thread="" file="ZTISetVariable">
    <![LOG[Event 41001 sent: ZTISetVariable processing completed successfully.]LOG]!><time="00:55:52.000+000" date="07-24-2013" component="ZTISetVariable" context="" type="1" thread="" file="ZTISetVariable">
    <![LOG[---------------- Initialization ----------------]LOG]!><time="00:55:53.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[Validating connection to \\NCSD-WDS\Latitude10Deploy$]LOG]!><time="00:55:53.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[Already connected to server NCSD-WDS as that is where this script is running from.]LOG]!><time="00:55:53.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[DestinationOSInstallType = BYDISKPARTITION]LOG]!><time="00:55:54.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[Found: DestinationDisk: 0]LOG]!><time="00:55:54.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[Found: DestinationPartition: 1]LOG]!><time="00:55:54.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No drive mapped to Disk Partition: \\MININT-IDKMK2C\root\cimv2:Win32_DiskPartition.DeviceID="Disk #0, Partition #0"]LOG]!><time="00:55:54.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[Unable to yield a target Partition (Special Recovery option for Litetouch).]LOG]!><time="00:55:54.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[DestinationDisk and Partition did not yield a target Partition.]LOG]!><time="00:55:54.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[Destination Logical Drive was not specificed, defaulting to #:\]LOG]!><time="00:55:54.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[Looking for Sysprep.inf in #:\sysprep\Sysprep.inf]LOG]!><time="00:55:55.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[The sysprep.inf file was not found.]LOG]!><time="00:55:55.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[Property OSDAnswerFilePathSysprep is now = ]LOG]!><time="00:55:55.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[The unattend.txt file was not found.]LOG]!><time="00:55:55.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[Found unattend.xml at \\NCSD-WDS\Latitude10Deploy$\Control\CAPTURE001\Unattend.xml, will copy to C:\MININT\Unattend.xml]LOG]!><time="00:55:55.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[Copied \\NCSD-WDS\Latitude10Deploy$\Control\CAPTURE001\Unattend.xml to C:\MININT\Unattend.xml]LOG]!><time="00:55:55.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[Property OSDAnswerFilePath is now = C:\MININT\Unattend.xml]LOG]!><time="00:55:55.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[Loaded C:\MININT\Unattend.xml]LOG]!><time="00:55:55.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for ComputerName]LOG]!><time="00:55:56.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for FullName]LOG]!><time="00:55:56.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for OrgName]LOG]!><time="00:55:56.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for ProductKey]LOG]!><time="00:55:56.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for JoinDomain]LOG]!><time="00:55:56.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for MachineObjectOU]LOG]!><time="00:55:56.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for JoinWorkgroup]LOG]!><time="00:55:56.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for DomainAdmin]LOG]!><time="00:55:56.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[<Message containing password has been suppressed>]LOG]!><time="00:55:56.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for InputLocale]LOG]!><time="00:55:56.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for Language]LOG]!><time="00:55:57.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for LanguageGroup]LOG]!><time="00:55:57.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for SystemLocale]LOG]!><time="00:55:57.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for UserLocale]LOG]!><time="00:55:57.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for TimeZone]LOG]!><time="00:55:57.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for AutoLogon]LOG]!><time="00:55:57.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for AutoLogonCount]LOG]!><time="00:55:57.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for BitsPerPel]LOG]!><time="00:55:57.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for Xresolution]LOG]!><time="00:55:57.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for Yresolution]LOG]!><time="00:55:57.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for Vrefresh]LOG]!><time="00:55:58.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for AreaCode]LOG]!><time="00:55:58.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for CountryCode]LOG]!><time="00:55:58.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for Dialing]LOG]!><time="00:55:58.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for LongDistanceAccess]LOG]!><time="00:55:58.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for Home_Page]LOG]!><time="00:55:58.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for AutoMode]LOG]!><time="00:55:58.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for AutoUsers]LOG]!><time="00:55:59.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[//settings[@pass="windowsPE"]/component[@name="Microsoft-Windows-Setup"]/UpgradeData/Upgrade not found in C:\MININT\Unattend.xml, unable to update.]LOG]!><time="00:55:59.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for OSDComputerName]LOG]!><time="00:55:59.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for ProductKey]LOG]!><time="00:55:59.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[Removed parent of //settings[@pass="windowsPE"]/component[@name="Microsoft-Windows-Setup"]/UserData/ProductKey/Key from C:\MININT\Unattend.xml because the value was blank.]LOG]!><time="00:55:59.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[Removed //settings[@pass="specialize"]/component[@name="Microsoft-Windows-Shell-Setup"]/ProductKey from C:\MININT\Unattend.xml because the value was blank.]LOG]!><time="00:55:59.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for JoinDomain]LOG]!><time="00:55:59.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[Removed //settings[@pass="specialize"]/component[@name="Microsoft-Windows-UnattendedJoin"]/Identification/MachineObjectOU from C:\MININT\Unattend.xml because the value was blank.]LOG]!><time="00:55:59.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for JoinWorkgroup]LOG]!><time="00:55:59.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for DomainAdmin]LOG]!><time="00:55:59.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for DomainAdminDomain]LOG]!><time="00:56:00.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[<Message containing password has been suppressed>]LOG]!><time="00:56:00.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[Updated C:\MININT\Unattend.xml with InstallFromPath=\\ncsd-wds\latitude10deploy$\Operating Systems\Windows 8 Pro x86\sources\install.wim (value was .\Operating Systems\Windows 8 Pro x86\Sources\install.wim)]LOG]!><time="00:56:00.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[//settings[@pass="windowsPE"]/component[@name="Microsoft-Windows-Setup"]/ImageInstall/OSImage/InstallFrom/MetaData[Key="/image/index"]/Value not found in C:\MININT\Unattend.xml, unable to update.]LOG]!><time="00:56:00.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[Updated C:\MININT\Unattend.xml with ImageIndex=1 (value was 1)]LOG]!><time="00:56:00.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[<Message containing password has been suppressed>]LOG]!><time="00:56:00.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[Updated PlainText entry to true.]LOG]!><time="00:56:00.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[<Message containing password has been suppressed>]LOG]!><time="00:56:00.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[Updated PlainText entry to true.]LOG]!><time="00:56:00.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[//settings[@pass="oobeSystem"]/component[@name="Microsoft-Windows-Shell-Setup"]/UserAccounts/LocalAccounts not found in C:\MININT\Unattend.xml, unable to update.]LOG]!><time="00:56:00.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for Organization]LOG]!><time="00:56:01.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for FullName]LOG]!><time="00:56:01.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for BitsPerPel]LOG]!><time="00:56:01.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for Xresolution]LOG]!><time="00:56:01.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for Yresolution]LOG]!><time="00:56:01.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for Vrefresh]LOG]!><time="00:56:01.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for AreaCode]LOG]!><time="00:56:01.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for CountryCode]LOG]!><time="00:56:01.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for LongDistanceAccess]LOG]!><time="00:56:01.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for LongDistanceAccess]LOG]!><time="00:56:02.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[Removed //settings[@pass="specialize"]/component[@name="Microsoft-Windows-Shell-Setup"]/TimeZone from C:\MININT\Unattend.xml because the value was blank.]LOG]!><time="00:56:02.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[Removed //settings[@pass="oobeSystem"]/component[@name="Microsoft-Windows-Shell-Setup"]/TimeZone from C:\MININT\Unattend.xml because the value was blank.]LOG]!><time="00:56:02.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for KeyboardLocale]LOG]!><time="00:56:02.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for KeyboardLocale]LOG]!><time="00:56:02.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for UserLocale]LOG]!><time="00:56:02.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for UserLocale]LOG]!><time="00:56:02.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for UserLocale]LOG]!><time="00:56:03.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for UserLocale]LOG]!><time="00:56:03.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for UILanguage]LOG]!><time="00:56:03.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for UILanguage]LOG]!><time="00:56:03.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[Updated C:\MININT\Unattend.xml with ImageLanguage001=en-US (value was en-US)]LOG]!><time="00:56:03.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[Updated C:\MININT\Unattend.xml with ImageLanguage001=en-US (value was en-US)]LOG]!><time="00:56:03.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[Updated C:\MININT\Unattend.xml with ImageLanguage001=en-US (value was en-US)]LOG]!><time="00:56:03.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for Home_Page]LOG]!><time="00:56:03.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for OrgName]LOG]!><time="00:56:03.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for OrgName]LOG]!><time="00:56:04.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for FullName]LOG]!><time="00:56:04.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for FullName]LOG]!><time="00:56:04.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[Updated C:\MININT\Unattend.xml with DestinationDisk=0 (value was 0)]LOG]!><time="00:56:04.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[Updated C:\MININT\Unattend.xml with DestinationPartition=1 (value was 1)]LOG]!><time="00:56:04.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[Rewrote C:\MININT\Unattend.xml with changes]LOG]!><time="00:56:04.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[ZTIConfigure COMPLETED. Return Value = 0]LOG]!><time="00:56:04.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[ZTIConfigure processing completed successfully.]LOG]!><time="00:56:04.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[Event 41001 sent: ZTIConfigure processing completed successfully.]LOG]!><time="00:56:05.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[Will boot into Windows PE architecture x86 to match OS being deployed.]LOG]!><time="00:56:06.000+000" date="07-24-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[DestinationOSInstallType = BYDISKPARTITION]LOG]!><time="00:56:06.000+000" date="07-24-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Found: DestinationDisk: 0]LOG]!><time="00:56:07.000+000" date="07-24-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Found: DestinationPartition: 1]LOG]!><time="00:56:07.000+000" date="07-24-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[No drive mapped to Disk Partition: \\MININT-IDKMK2C\root\cimv2:Win32_DiskPartition.DeviceID="Disk #0, Partition #0"]LOG]!><time="00:56:07.000+000" date="07-24-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Unable to yield a target Partition (Special Recovery option for Litetouch).]LOG]!><time="00:56:07.000+000" date="07-24-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[DestinationDisk and Partition did not yield a target Partition.]LOG]!><time="00:56:07.000+000" date="07-24-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[FAILURE ( 5456 ): Unable to determine Destination Disk, Partition, and/or Drive. See BDD.LOG for more information.]LOG]!><time="00:56:07.000+000" date="07-24-2013" component="LTIApply" context="" type="3" thread="" file="LTIApply">
    <![LOG[Event 41002 sent: FAILURE ( 5456 ): Unable to determine Destination Disk, Partition, and/or Drive. See BDD.LOG for more information.]LOG]!><time="00:56:08.000+000" date="07-24-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Removing AutoAdminLogon registry entries]LOG]!><time="00:56:12.000+000" date="07-24-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
    <![LOG[VSSMaxSize not specified using 5% of volume.]LOG]!><time="00:56:12.000+000" date="07-24-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
    <![LOG[Logs contained 8 errors and 0 warnings.]LOG]!><time="00:56:13.000+000" date="07-24-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
    <![LOG[No Windows PE image to delete.]LOG]!><time="00:56:13.000+000" date="07-24-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
    <![LOG[Stripping BDD commands from unattend.xml template.]LOG]!><time="00:56:13.000+000" date="07-24-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
    <![LOG[Modified unattend.xml saved to C:\windows\panther\unattend.xml]LOG]!><time="00:56:13.000+000" date="07-24-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
    <![LOG[Checking mapped network drive.]LOG]!><time="00:56:14.000+000" date="07-24-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
    <![LOG[testing drive Z: mapped to \\ncsd-wds.ncsd.local\deploymentshare$]LOG]!><time="00:56:14.000+000" date="07-24-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
    <![LOG[testing drive Y: mapped to \\NCSD-WDS\Latitude10Deploy$]LOG]!><time="00:56:14.000+000" date="07-24-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
    <![LOG[Disconnecting drive Y: mapped to \\NCSD-WDS\Latitude10Deploy$]LOG]!><time="00:56:14.000+000" date="07-24-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
    <![LOG[Cleaning up C:\MININT directory.]LOG]!><time="00:56:14.000+000" date="07-24-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
    <![LOG[Cleaning up TOOLS, SCRIPTS, and PACKAGES directories.]LOG]!><time="00:56:14.000+000" date="07-24-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
    <![LOG[Removing C:\MININT folder (final log entry)]LOG]!><time="00:56:15.000+000" date="07-24-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">

  • Can't boot from USB or DVD. HP Pavilion g6-2257sr

    My new notebook HP Pavilion g6-2257sr don't let me to boot from USB device. 
    When notebook's booting, I pressed ESC and F10. Then I set up UFEI boot order - USB-device / DVD / OS selector. 
    I use official Windows 7 disk, and several own USB devices with bootable images.
    But rebboting use hard drive's OS all the same.
    Please help. I want to delete current OS from my notebbok.
    This question was solved.
    View Solution.

    Hi:
    I would make a set of recovery disks first before proceeding.
    To boot the PC you need to go into the BIOS and enable legacy mode.
    Then you should be able to boot from another device.

  • Satellite C50-A634 wont boot from USB or DVD

    My new toshiba Satellite C50-A634 wont boot from usb, or dvd ,
    i have downloaded win 8.1 and burn image to dvd but i still get an error message "no bootable device......please restart system" .
    Can some one plz help?

    Hi
    Does Satellite C50-A634 supports internal CD/DVD drive or did you try to boot from external optical disk drive?
    You have to know that _Satellite C50 & Satellite C50D models *without* a built-in ODD_ are not able to boot from an external ODD due to a technical limitation.
    Details here:
    [Limitation of external boot media for Satellite, Satellite Pro C50 & C50D devices|http://aps2.toshiba-tro.de/kb0/TSB3B03JA0000R01.htm]
    Only USB flash drives are supported as external boot devices!
    It is necessary you can use a USB flash drive as recovery media on notebooks without a built-in ODD.

  • Hp mini will not boot from usb and USB not listed as a choice

    I have an HP mini 110-1116NR and it crashed. During a system restore it stopped working so now there is no operating system on it.
    In BIOS there is no choice to boot from USB (when my disks come in mail from HP)
    Also when it kinda starts im at the DOS screen....system32.exe???????
    I dont know what this means

    Hi cathy69:
     Thank you for your inquiry.   I am pleased to assist you!
    I hope you had a great weekend!
    I see you are looking to change the boot order on your computer. Here is a link to 'Configuring the Boot Order in the System Bios" click here. Please let me know if you require further assistance.
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • Mobo Support for booting from USB hdd

    Hi,
    I have a K8N Diamond.
    How can I check whether my mobo can support booting from USB hdd?
    I know it can boot from the USB-CDROM.
    If not, do I need a bios update?

    Quote from: Stu on 21-January-08, 00:38:45
    How to identify your BIOS and m/b version
    But please don't go flashing your BIOS just for the sake of doing so.
    Your USB HDD will be listed under Hard Disks in BIOS, there won't be a USB-HDD option
    Wow, thanks for the link and the pointer. I've found out where the USB hdd is now.
    I won't flash my bios for the sake of that thanks to you, but I'm upgrading to a Dual-Core soon and I realised my bios is w7100nms v1.0.
    So I have to flash my bios soon. Any tips regarding this?

  • Booting from new disk drive

    After copying all of my old drive onto a newer one I want to have all the computers that previously used the old drive boot into the new one. I can see the drive on my main server desktop but cannot boot from it. Any suggestions or readings you can suggest?

    Several questions.
    What application did you use to copy the files? SuperDuper! (full disk cloning is free; a very good app by the way). Carbon Copy Cloner? Both of these apps will clone a disk and make it bootable.
    Were you able to boot from this disk before?
    Is this disk an external firewire or USB? As far as I know all Mac with a firewire port can boot from a firewire bootable disk. I think only more recent Macs can boot from a USB disk.
    You mentioned server. Are you by any chance trying to do a NetBoot? After all this is the *Networking and Web* forum. If so then the Mac OS X Server forum might be a better place to ask about NetBooting.

  • Need to boot from USB device with my Portege 7020ct

    hi!
    i need help!!!
    situation: me and my girlfriend go for a long trip on tuesday. we have to work, so we bought a second hand portege 7020ct.
    it has no cd or floppy drive. win98 is installed but without drivers for the modem. the infra-red can locate other computers, but is not able to connect.
    so the onliest thing i have is one usb slot.
    i want to install win2000 or at least put some data on the hard drive.
    so i need to use my external cd drive or a usb stick. the problem is, the system (usb slot) found the external drive and the usb sticks, but i need to install some drivers to get them ready! but how???? --> no internet, no floppy, no internal cd, no infra red....
    what can i do????
    i tried to get into the bios to find out, if it is possible to boot from the usb slot, to perhaps get the external drive runnin and then install win2000.
    but i can´t find out how to enter the bios!!!! ...but i´m not sure if this will work.
    how can i get into the bios?
    do anybody has an idea what i can do? how can i get drivers into the system?
    how can i get the external drive runnin or the usb sticks`??
    please! i need very quick help, cause tomorrow is my last day...
    thanks to everybody in advance,
    deko

    Hi Deko,
    Pressing the <esc> button on power up takes you to the BIOS settings.
    Installing the drivers could be difficult. I have a 7010CT and there's no option to boot from USB (just floppy - hard disk - cdrom - lan). I don't think Windows98 supports USB sticks without extra drivers. I upgraded from Windows98 to Windows2000 by using an external PCMCIA cdrom and starting the installer from Windows98. Maybe you could try a PCMCIA network card of try to find a floppy disk for the Portege.

  • R31: how to boot from usb?

    I would like to install Linux on my thinkpad r31. Because it seems like the cdrom drive has some issues, I want to boot from usb. I have searched for how to do this, but I cannot find anything.
    These are my boot options, with my usb pen drive attached:
    https://www.dropbox.com/s/4idr9gstmt7c7b2/IMG_20140123_195710.jpg
    I read on another forum that other thinkpads (t-series or x-series) have the boot from usb option in bios, but the R series doesn't have this option?
    What can I do to be able to boot from usb?
    this is what I have concerning the bios version:
    usb floppy is on top of the boot devices. under hard disks, i only see installes hard disk, no usb drive.. i'm using bios version: 3.110 (1FETF1WW), date: 2004-11-16
    embedded controller version: 02.29.12

    From what I recall - it's been a long time since I've last touched a R31 - they will NOT boot from USB under any circumstances.
    Media drives are inexpensive nowadays, try replacing yours and install the OS from there.
    Good luck.
    Cheers,
    George
    In daily use: R60F, R500F, T61, T410
    Collecting dust: T60
    Enjoying retirement: A31p, T42p,
    Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
    Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

  • Does KT4 boot from USB Flashdisk?

    Unfortunately I don't have the KT4 board, but I could have a one.
    Have anybody experience if KT4 boots from USB Flashdisk?
    Thanks.

    presumably most modern mobos allow for booting from USB devices such as floppy drives and flash disks
    why not download the manual from here http://www.msi.com.tw/program/support/download/dld/spt_dld_list.php?kind=1&CHIP=4&NAME=Socket%20A%20(AMD%20K7) and looking through the BIOS instructions? i think there should be.

  • W541: Cannot boot from USB created with Windows 8 create recovery drive

    Hello, I have just bought a W541, and want to install the supplied Windows 8 on an m.2 SSD.I created the recovery drive on a USB following the instructions in the User Manual, but the recover image procedure under Advanced Options cannot find the USB.During the re-image step, it fails to find a drive with a valid image.I've confirmed using the command window available under the Advanced Options that the USB is mounted Searching these forums, I found the following, which describes a similar problem for a T540:https://forums.lenovo.com/t5/ThinkPad-W-Series-Laptops/Lenovo-W540-won-t-boot-from-USB-flash-drive-ThinkPad/m-p/1500902#M39097 This implies that the USB should first be formatted with FAT32 before use, which cannot work, since FAT32 only has a maximum 4 GB  partition, whereas when copied to the USB, the Windows 8 recovery drive occupies nearly 10 GB. Is it possible to specify the boot order from insde the BIOS? I could only find an entry under Security about UEFI boot enabling, nothing about the boot order. Can anyone help?Paul    

    Hello Z, thanks for the reply. I tried another USB drive, and created a recovery drive, as before.This time it was able to detect the presence of the drive when I tapped on the Enter key when starting up, followed by the F12 key.  However, there are still problems when I clicked through the options:Choose the languageChoose your keyboard layoutTroubleshootAdvanced optionsSystem Image Recovery At this point I am offered the option Windows 8.1.When I select this, it indicates it is scanning for system disks, and then displays the the pop-up window "Re-image your computer": "Windows cannot find a system image on this computer" Why does this happen if it detected that there was a Windows 8.1 installation on the USB? I've spent a whole day now on this. Luckily, if I can't solve it, the machine is new and I can send it back to Lenovo, and ask to have it re-imaged with the downgrade option to Windows 7.

Maybe you are looking for

  • What are the forensic limitations of Metadata & Exif Data+ Adobe Photoshop 3 question; e.g. Metadata

    I have some questions regarding metadata, and exif data on digital   cameras and its forensic limitations in Adobe photoshop 3; For  instance; After a picture is taken and has a metadata/exif digital   stamp of the "picture being taken day" under wha

  • N95 8GB video problem!

    whenever i turn the camera video on it just freezes for a second during filming.. but if i chabge to store the video on phone memory it never freezes.. i can't shoot long videos bc i can't use the camera while saving what i get to the mass memory.. 

  • Projector + Mac mini

    I recently bought a Toshiba MT200 projector and I'm looking at purchasing a new Mac mini (1.66GHz Intel Core Duo). The projector's native resolution is 854x480 pixels and I just wondered, when I connect the Mac mini to it via DVI, will the Mac mini s

  • Solaris 8 x86: How to install on disk connected via IDE controller

    I have a PC with a Pentium 4 processor and the following IDE disks: Disk 1 and 2 at the primary IDE bus. Disk 3 connected via Promise Ultra 133 IDE controller. I want to install Solaris 8 Intel x86 edition on Disk 3, but the installation program only

  • "Internal verification failure" in all my scripts after update to AE CC 2014

    Hi! After updating to After Effects CC 2014 I am getting the next error message in any of my javascripts now: In AE CC everything working smooth and very well. I am getting error immediately after alert("6") and before alert("The END") Can you advise