Booting Solaris10 x86

I've just installed Solaris10 x86 in my PC.
I have two disks: No. 1 with WIN_XP and a lot of data.
No.2 with only Solaris10 just installed but I can't boot to it. When I reboot the PC it goes directly to WIN_XP. I suppose that it may be because when I installed Solaris, I deselected the 1st disk to avoid that the program installation would damage or erase anything on it. (Got a notice about needing to enter the BIOS because of it, but I don't know what to do there).
The installation went quite OK; not the slightest problem.
( I used a Personalized Installation, not the Predetermined one)
The question is: If I reinstall Solaris 10 on the same 2nd disk and I don't deselect the 1st disk, will the program leave alone my WIN_XP and all the data in this disk allowing me to make a choice when rebooting the PC?

Sir,
I have installed both operating systems on one disk and have Solaris set as the primary operating system.
In this way Solaris rightfully recognises Windows as an existing operating system and shows it to you in its boot-menu. You can make your choice which operating system you want to boot from at boot-time.
I haven't tried it (yet) but I suspect that, when you configure your Solaris disk as the primary boot disk, Windows will be recognised as an optional disk to boot from

Similar Messages

  • Unable to run ./runInstaller for oracle 10.2.0.2 on solaris10 x86

    Hi,
    Below is the error i m getting when i m trying to install oracle 10.2.0.2 on solaris10 x86
    # xhost +
    access control disabled, clients can connect from any host
    # su - oracle
    Sun Microsystems Inc.   SunOS 5.10      Generic January 2005
    $ DISPLAY=prod3:0.0; export DISPLAY
    $ echo $DISPLAY
    prod3:0.0
    $ cd /Desktop/data*
    $ ls -ltr
    total 22
    -rwxrw-rw-   1 oracle   oinstall    5115 Jun 21  2006 welcome.html
    -rwxrw-rw-   1 oracle   oinstall    1331 Jun 27  2006 runInstaller
    drwxrwxrwx   5 oracle   oinstall     512 Oct 22 21:58 install
    drwxrwxrwx   9 oracle   oinstall     512 Oct 22 21:58 doc
    drwxrwxrwx   3 oracle   oinstall     512 Oct 22 21:58 stage
    drwxrwxrwx   2 oracle   oinstall     512 Oct 22 21:58 response
    $ ./runInstaller
    Starting Oracle Universal Installer...
    Checking installer requirements...
    Checking operating system version: must be 5.10.    Actual 5.10
                                          Passed
    Checking Temp space: must be greater than 250 MB.   Actual 5136 MB    Passed
    Checking swap space: must be greater than 500 MB.   Actual 5868 MB    Passed
    Checking monitor: must be configured to display at least 256 colors
        >>> Could not execute auto check for display colors using command /usr/openwin/bin/xdpyinfo. Check if the DISPLAY variable is set.    Failed <<<<
    Some requirement checks failed. You must fulfill these requirements before
    continuing with the installation,at which time they will be rechecked.
    Continue? (y/n) [n] n
    User Selected: No
    Exiting Oracle Universal Installer, log for this session can be found at /tmp/OraInstall2012-10-22_10-18-22PM/installActions2012-10-22_10-18-22PM.log

    913410 wrote:
    Below is the O/P as Oracle user
    # su - oracle
    Sun Microsystems Inc.   SunOS 5.10      Generic January 2005
    $ xclock
    ksh: xclock:  not found
    $ finger
    Login       Name               TTY         Idle    When    Where
    root     Super-User            console          Mon 22:58  :0
    root     Super-User            pts/3            Mon 22:59  :0.0
    OUI fails when you su - oracle.
    X-Windows software must be installed as part of DB Server OS packages
    You must log onto DB Server by doing as below
    ssh -X oracle@db_server
    or functional equivalent to above

  • Realtek PCIe GBE network card driver for Solaris10 x86

    Hi Gurus,
    My laptop has a Realtek PCIe GBE network card but I could not find the driver for Solaris10 x86 anywhere, can anybody help me with this issue?
    Thanks

    how about this?
    http://homepage2.nifty.com/mrym3/taiyodo/eng/
    other google hits indicate that there is a realtek driver in OpenSolaris.

  • Operating System on x64 can be deployed with boot image x86

    Hi,
    I want to know if there is any limitation to deploy Operating System and Wim image on x64 (64 bit) using a boot image x86 (32 bits)
    Thanks

    Hi, 
    That is what I'm trying to accomplish because during the years with SCCM 2007 we were available to deploy x64 OS
    (windows 7, 8, 8.1) using x86 boot image without any problem. Since we migrated to SCCM 2012 R2 CU 2 we have experimenting different and
    intermittent issues:
    we are using x86 boot image to deploy x64 OS and
    x64 drivers package. When the system reboot to start the setup, we get a black screen with a movable cursor (but nothing to click on!).
    when I change the task sequence to use x64 boot image (note: using the same x64 OS and same drivers package) the process continue with success.
    I'm searching any technical documentation from Microsoft to better understand this issue. What can be the reason why it work fine with x64 boot image and not with x86.

  • WDS Windows Server 2008 R2 network boot PXE x86 UEFI support?

    Hi,
    WDS Windows Server 2008 R2 network boot  PXE x86 UEFI support?
    -I have an SCCM 2012 SP1 site on Windows server 2008 R2.
    -I have an HP ElitePAD 900 with Atom x86 processor, and I have some problem to deploy an OSD image to the ElitePAD.
    Do I need WDS on an Server 2012 to get PXE x86 UEFI support with KB2817245?
    http://support.microsoft.com/kb/2817245/en-us
    /Per Sai
    /SaiTech

    Is this why I get this error with 2008R2?
    Windows failed to start.  A recent hardware or software change might be the cause.  To fix it... <blahblah>
    File:\Windows\System32\boot\winload.efi
    Status: 0xc0000359
    Thanks,
    Jason

  • Solaris10/x86 date screwed up after rtc cronjob

    Hello,
    I'm having problems with solaris10/x86 03/05 w/o patches since two days.
    From sunday to monday night, at about 2am the clock jumped to 11pm of 31.12.1969. I suspect the rtc cronjob which is to be run at 2:01 am. This affected two of my three x86 sun servers. The same happened right now, (monday to tuesday night) and affected only one of the three servers. I want you to know, that we had switched to summertime from saturday to sunday night, so this happens since 1 day after switching to summer time (that worked fine on saturday night).
    Setting the date doesn't work, it will always reset to 1.1.1970 automatically:
    server:~#date -u 010100302005 && sleep 5 && date
    Sat Jan 1 00:30:00 GMT 2005
    Thu Jan 1 00:00:04 CET 1970
    ntpdate doesn't work as well.
    I use these steps to get it working:
    1) set date to something useful (gets automatically reset to 1.1.1970)
    2) reboot
    3) set date again to something useful
    4) try ntpdate (doesn't work at this step)
    5) reboot
    6) set date again to something useful
    7) ntpdate (works this time)
    I'm very curious about this issue, where can I find out if can contact sun support regarding this problem?

    Today it happened again on one of the three servers (v40z) :(
    This is what I tried after I got it running again:
    # date
    Sat Jan 1 01:30:46 CET 2005
    # ./ntpdate clock.redhat.com
    29 Mar 02:29:30 ntpdate[334]: step time server 66.187.233.4 offset 39052701.743699 sec
    # date
    Wed Mar 29 02:29:31 CEST 2006
    # [ -x /usr/sbin/rtc ] && /usr/sbin/rtc -c
    # date
    Wed Dec 31 23:00:01 CET 1969
    I also noticed on an x4100 server:
    # date
    Sun Jan 29 01:55:50 CET 2006
    # date -u 032902302006
    Wed Mar 29 02:30:00 GMT 2006
    # date
    Wed Dec 31 23:00:02 CET 1969
    /etc/rtc_config shows:
    zone_info=Europe/Malta
    zone_lag=-3600
    I'm trying to get the reason for this, any hints how to chase the problem?

  • Boot Camp: x86 Windows drivers

    So I installed Windows using Boot Camp. Support drivers were moved to my USB stick.
    I started up driver installer, and it says that this type of file is not supported by this version of Windows. This is probably because I'm using Windows 7 Ultimate 32-bit (x86). I didn't find any x86 support drivers anywhere.

    That's because you have downloaded the Boot Camp 5 drivers. Boot Camp 5 drivers are only compatible with 64-bit Windows 7 and Windows 8 versions. In order to get the correct Boot Camp version for your 32-bit Windows, download them from the Apple website > http://support.apple.com/downloads
    Another option you have is to upgrade to a 64-bit Windows version

  • Solaris10 x86 lot of  "driver not attached"

    I downloaded and installed Solaris10 on my x86 system. Installation process occured without any error. But my ethernet adapter does not work.
    After prtconf there was a lot of devices without driver attached to it. In fact, there was attached driver only to display adapter, IDEcontroller, FDcontroller, USB UHCI controller(I use USB keyboard and mouse).
    How can I attach driver to device and how/where can I found proper one? All my hardware I found in HCL, some of it only in part "reported to work"
    I have no experience with Solaris.
    Any suggestions? Thank You!

    Hello,
    Thanks for the very helpful suggestions. But I need to know why I see os error 49 as below.
    SQL> ORA-01034: ORACLE not available
    ORA-27123: unable to attach to shared memory segment
    Linux-x86_64 Error: 49: Protocol driver not attached
    Additional information: 393227
    Additional information: 69
    Additional information: 10
    The document provided shows us the error may be accompanied by one of the following. Error 49 is not mentioned.
       A) SVR4 error 12: not enough space
       B) SVR4 error 22: Invalid argument (you are trying to increase SGA and
                                           SHMMAX is large enough)
       C) SVR4 error 22: Invalid argument
       D) SVR4 error 22: Invalid argument
       E) UNIX error 13 (Permission Denied)
       F) SVR4 error 24 - too many open files.
    What does potentially cause shmat() to be failed with os error 49, "Protocol driver not attached"?
    Please suggest.
    Thanks.

  • /sbin/init not found after Solaris10-x86 first reboot

    Hello all,
    I just installed Solaris 10 on a x86. Nothing seemed to go awry, AFAIK.
    After the very first reboot it fails to boot with this:
    WARNING: exec(/sbin/init) file not found
    (Could not start init)
    Press any key to reboot.
    So I'm stuck, it seems.
    It does not seem that the / slice is missing as I guess I'd have a totally different error message, something like "could not mount root fs", I dunno.
    I'm sure that if I could boot the install DVD in single mode I'd be able to go and really check if /sbin/init really exists.
    Except that... I'm used to Sparc with its OPB, dunno how to get x86's equivalent to OpenBoot.
    Anyway, anyone came across the same "missing file" problem after initial install, and if so, how did you get out of it ?
    Bonus question, is there an equivalent to OpenBoot on x86 and how to reach it ?
    Before you ask.. this PC ran on Solaris 9/x86 a looooong time ago, no hardware changes, so no need to send me to the HCL :)
    Thanks,
    Jeff

    WARNING: exec(/sbin/init) file not foundSorry, can't help you with this since I never encountered such an error.
    Except that... I'm used to Sparc with its OPB, dunno
    how to get x86's equivalent to OpenBoot.That would be the configuration manager. Its the question you get in the beginning where it asks you what image to boot ('press b or enter to boot normally'). If you press escape there you get into the section where you can determine the default boot device and add new hardware drivers when needed.

  • Install 10g RAC on solaris10(x86) in VMware,but failed on crs's root.sh

    VMware server 1.0.4 build-56528
    bash-3.00# uname -a
    SunOS rac02 5.10 Generic_118855-33 i86pc i386 i86pc
    disk information:
    format->partition->print,this is the result
    Current partition table (original):
    Total disk cylinders available: 3580 + 2 (reserved cylinders)
    Part Tag Flag Cylinders Size Blocks
    0 usr wm 3 - 5 6.00MB (3/0/0) 12288
    1 usr wm 76 - 95 40.00MB (20/0/0) 81920
    2 backup wu 0 - 3579 6.99GB (3580/0/0) 14663680
    3 usr wm 96 - 2000 3.72GB (1905/0/0) 7802880
    4 usr wm 2001 - 3579 3.08GB (1579/0/0) 6467584
    5 usr wm 6 - 75 140.00MB (70/0/0) 286720
    6 unassigned wm 0 0 (0/0/0) 0
    7 unassigned wm 0 0 (0/0/0) 0
    8 boot wu 0 - 0 2.00MB (1/0/0) 4096
    9 unassigned wm 0 0 (0/0/0) 0
    i want to save ocr and voting on raw partition,ocr on 5(140m) and vot on 1(40m)
    then,i do as this,
    bash-3.00# ln -s /dev/rdsk/c2t0d0s5 /orac/ora_ocr
    bash-3.00# ln -s /dev/rdsk/c2t0d0s1 /orac/ora_vot
    bash-3.00# chown -RL root:oinstall /orac/ora_ocr
    bash-3.00# chown -RL oracle:oinstall /orac/ora_vot
    bash-3.00# chmod 777 /orac/ora_ocr
    bash-3.00# chmod 777 /orac/ora_vot
    this is the error message:
    bash-3.00# /orac/crs/product/10.2.0/root.sh
    WARNING: directory '/orac/crs/product' is not owned by root
    Checking to see if Oracle CRS stack is already configured
    Setting the permissions on OCR backup directory
    Setting up NS directories
    Oracle Cluster Registry configuration upgraded successfully
    WARNING: directory '/orac/crs/product' is not owned by root
    Successfully accumulated necessary OCR keys.
    Using ports: CSS=49895 CRS=49896 EVMC=49898 and EVMR=49897.
    node <nodenumber>: <nodename> <private interconnect name> <hostname>
    node 1: rac01 node1 rac01
    node 2: rac02 node2 rac02
    Creating OCR keys for user 'root', privgrp 'root'..
    Operation successful.
    Now formatting voting device: /orac/ora_vot
    CLSFMT returned with error [4].
    Failed to initialize Oracle Cluster Registry for cluster
    0
    What is wrong?
    I have other questions,
    A.Before install CRS,do i need some packages?SUNWarc SUNWbtool SUNWhea SUNWlibm SUNWlibms SUNWsprot SUNWtoo SUNWi1of SUNWi1cs SUNWi15cs SUNWxwfnt,install guide told me these packages is necessary,but someone told me it wrote for solaris 9
    B.How can i use the raw device?
    C.Do i need the sun cluster?

    These machines are in vmware server,and I use "vmware-vdiskmanager -c -s 250Mb -a lsilogic -t 2 "D:\10gRAC\votedisk.vmdk"" to create the shared storage.
    -thanks

  • DB 10gR1 in a zone on solaris10/x86

    Hi,
    i'm trying to install Oracle10g R1 on solaris 10 ( 6/06 ) x86 ( 32 bit ) -- thus i can't load R2 on it. ( only x86-64 supported ). Moreover i'm trying to install in a dedicated zone with inherited /usr,/var, /opt etc. there aren't any resource pools created ( pooladm )
    i've already figured that i had to update some ini file to support 5.10 OS version ( only 5.6-5.9 were listed )
    the DB server is not running Xserver, but i've setup environiment to connect to remote Xserver -- my workstation -- this works -- xterm/xload/xlogo are all working. but when i launch runInstaller:
    oracle@db:/ora-install/Disk1$ sh runInstaller
    Starting Oracle Universal Installer...
    Checking installer requirements...
    Checking operating system version: must be 5.6, 5.7, 5.8, 5.9 or 5.10. Actual 5.10
    Passed
    All installer requirements met.
    Preparing to launch Oracle Universal Installer from /var/tmp/OraInstall2006-08-23_03-53-47PM. Please wait ...oracle@db:/ora-install/Disk1$ Oracle Universal Installer, Version 10.1.0.3.0 Production
    Copyright (C) 1999, 2004, Oracle. All rights reserved.
    Warning: Cannot convert string "MetaCtrl<Key>Insert" to type VirtualBinding
    Warning: Cannot convert string "-monotype-arial-regular-r-normal--*-140-*-*-p-*-iso8859-1" to type FontStruct
    and the instalator creates on my workstation single gray-filled box with nothing inside it, it is called "Oracle.sysman.oii.oiic.OiicInstaller'.
    i've figured using truss -f that the process is waiting for something ( pollsys() syscall ).
    This works also great ( no-error ):
    oracle@db:/tmp$ cat Test.java
    import java.awt.*;
    public class Test {
    public static void main(String[] args) {
    // This code will force AWT to connect to the X server
    java.awt.GraphicsEnvironment.getLocalGraphicsEnvironment();
    oracle@db:/tmp$ javac Test.java
    oracle@db:/tmp$ java Test
    oracle@db:/tmp$

    add-on:
    [root@db ~]# /usr/ucb/ps auxwwwww | grep ^oracle
    oracle 2070 0.2 2.86748028996 ? S 16:01:36 0:04 /var/tmp/OraInstall2006-08-23_04-01-30PM/jre/1.4.2/bin/java -Doracle.installer.library_loc=/var/tmp/OraInstall2006-08-23_04-01-30PM/oui/lib/solaris -Doracle.installer.oui_loc=/var/tmp/OraInstall2006-08-23_04-01-30PM/oui -Doracle.installer.bootstrap=TRUE -Doracle.installer.startup_location=/ora-install/Disk1/install -Doracle.installer.jre_loc=/var/tmp/OraInstall2006-08-23_04-01-30PM/jre/1.4.2 -Doracle.installer.nlsEnabled="TRUE" -Doracle.installer.prereqConfigLoc= -Doracle.installer.unixVersion=5.10 -mx96m -cp /var/tmp/OraInstall2006-08-23_04-01-30PM:/var/tmp/OraInstall2006-08-23_04-01-30PM/oui/jlib/OraInstaller.jar:/var/tmp/OraInstall2006-08-23_04-01-30PM/oui/jlib/xmlparserv2.jar:/var/tmp/OraInstall2006-08-23_04-01-30PM/oui/jlib/srvm.jar:/var/tmp/OraInstall2006-08-23_04-01-30PM/oui/jlib/share.jar:/var/tmp/OraInstall2006-08-23_04-01-30PM/oui/jlib/OraInstallerNet.jar:/var/tmp/OraInstall2006-08-23_04-01-30PM/oui/jlib/InstImages.jar:/var/tmp/OraInstall2006-08-23_04-01-30PM/oui/jlib/InstHelp.jar:/var/tmp/OraInstall2006-08-23_04-01-30PM/oui/jlib/oracle_ice.jar:/var/tmp/OraInstall2006-08-23_04-01-30PM/oui/jlib/help4.jar:/var/tmp/OraInstall2006-08-23_04-01-30PM/oui/jlib/help4-nls.jar:/var/tmp/OraInstall2006-08-23_04-01-30PM/oui/jlib/ewt3.jar:/var/tmp/OraInstall2006-08-23_04-01-30PM/oui/jlib/ewt3-swingaccess.jar:/var/tmp/OraInstall2006-08-23_04-01-30PM/oui/jlib/ewt3-nls.jar:/var/tmp/OraInstall2006-08-23_04-01-30PM/oui/jlib/swingaccess.jar:/var/tmp/OraInstall2006-08-23_04-01-30PM/oui/jlib/classes12.jar::/var/tmp/OraInstall2006-08-23_04-01-30PM/oui/jlib/prereq.jar:/var/tmp/OraInstall2006-08-23_04-01-30PM/oui/jlib/jewt4.jar:/var/tmp/OraInstall2006-08-23_04-01-30PM/oui/jlib/jewt4-nls.jar oracle.sysman.oii.oiic.OiicInstaller -scratchPath /var/tmp/OraInstall2006-08-23_04-01-30PM -sourceLoc /ora-install/Disk1/install/../stage/products.xml -sourceType network -timestamp 2006-08-23_04-01-30PM -DTRACING.ENABLED=TRUE -DTRACING.LEVEL=2

  • Help in compiling/linking a DEVICE DRIVER in SOLARIS10 x86

    hello!
    PROBLEM:
    ++++++++++++++++++++++++++++++++++
    i need assistance in compiling/linking a video capture
    driver (bt848x) (http://bt848x.sourceforge.net/) for
    solaris 10 x86.
    the driver uses the /usr/lib/libc.a (specifically the _xtoll.o)
    which, if im not mistaken, is not available in solaris 10
    anymore. so how am i going to compile it?
    BACKGROUND:
    ++++++++++++++++++++++++++++++++++
    the original compile/link code in the makefile is:
    /usr/ccs/bin/ld -o bt848x -r bt848-cards.o bt848-driver.o
    bt848-kern.o i2c.o tuner.o sound-tda9875.o
    sound-msp3400.o _xtoll.o
    i modified it to:
    /usr/ccs/bin/ld -o bt848x bt848-cards.o bt848-driver.o
    bt848-kern.o i2c.o tuner.o sound-tda9875.o
    sound-msp3400.o -L/usr/lib -lc
    (NOTE: i removed the -r and _xtoll.o; and added
    -L/usr/lib -lc)
    the output was:
    Undefined ____________ first referenced
    symbol ______________ in file
    mod_install bt848-kern.o
    delay bt848-cards.o
    ddi_get_instance bt848-kern.o
    nodev bt848-kern.o
    ddi_create_minor_node bt848-kern.o
    ddi_regs_map_free bt848-kern.o
    pci_config_getw bt848-driver.o
    pci_config_getb bt848-driver.o
    ddi_soft_state_zalloc bt848-kern.o
    ddi_dma_unbind_handle bt848-kern.o
    kmem_alloc i2c.o
    cv_broadcast bt848-driver.o
    ddi_remove_intr bt848-kern.o
    ddi_get_soft_state bt848-kern.o
    mod_driverops bt848-kern.o
    ddi_get_lbolt bt848-cards.o
    mutex_tryenter bt848-kern.o
    ddi_get_iblock_cookie bt848-kern.o
    nochpoll bt848-kern.o
    ddi_copyin bt848-kern.o
    mod_info bt848-kern.o
    ddi_remove_minor_node bt848-kern.o
    nulldev bt848-kern.o
    ddi_dma_sync bt848-driver.o
    ddi_dma_addr_bind_handle bt848-kern.o
    mod_remove bt848-kern.o
    ddi_prop_lookup_int_array bt848-cards.o
    _pagesize                           bt848-driver.o
    ddi_prop_op bt848-kern.o
    ddi_dma_free_handle bt848-kern.o
    ddi_set_driver_private bt848-kern.o
    cv_wait_sig bt848-kern.o
    ddi_intr_hilevel bt848-kern.o
    ddi_regs_map_setup bt848-kern.o
    pci_config_teardown bt848-driver.o
    ddi_dma_mem_alloc bt848-kern.o
    ddi_copyout bt848-kern.o
    cmn_err bt848-cards.o
    ddi_dma_alloc_handle bt848-kern.o
    ddi_prop_exists bt848-cards.o
    cv_init bt848-kern.o
    pci_config_setup bt848-driver.o
    cv_destroy bt848-kern.o
    timeout sound-msp3400.o
    untimeout sound-msp3400.o
    devmap_umem_setup bt848-kern.o
    ddi_prop_get_int bt848-kern.o
    uiomove bt848-kern.o
    kmem_free i2c.o
    ddi_add_intr bt848-kern.o
    ddi_report_dev bt848-kern.o
    getminor bt848-kern.o
    mutex_exit bt848-driver.o
    ddi_prop_free bt848-cards.o
    ddi_soft_state_fini bt848-kern.o
    ddi_soft_state_free bt848-kern.o
    ddi_soft_state_init bt848-kern.o
    mutex_enter bt848-driver.o
    ddi_mem_putl bt848-cards.o
    ddi_mem_getl bt848-cards.o
    drv_usecwait bt848-cards.o
    drv_usectohz bt848-cards.o
    ddi_dma_mem_free bt848-kern.o
    ld: fatal: Symbol referencing errors. No output written to bt848x
    QUESTIONS:
    ++++++++++++++++++++++++++++++++++
    1.) What other libraries do i need to include so that
    there would no more "symbol referencing errors" ???
    2.) Is my linking code correct?
    /usr/ccs/bin/ld -o bt848x bt848-cards.o bt848-driver.o
    bt848-kern.o i2c.o tuner.o sound-tda9875.o
    sound-msp3400.o -L/usr/lib -lc
    i mean, is it ok to build a driver with dynamic libraries?
    or the device driver should always be statically linked?
    COMPUTER SPECS:
    ++++++++++++++++++++++++++++++++++
    Solaris 10 (6/06 release)
    SunOS 5.10 Generic_118844-26 i86pc i386 i86pc
    Pentium 4 - 1.4GHz
    1GB RDRAM
    32 BIT
    Video Capture Card: PixelView PV-BT878P+FM.RC (rev.9F)
    thanks!!!
    -kllc

    i think i already found the answers to my questions
    (i partially read SUN docs WRITING DEVICE DRIVER in
    http://docs.sun.com/app/docs/doc/816-4854 specifically
    the BUILDING A DEVICE DRIVER) =)
    i used:
    /usr/ccs/bin/ld -o bt848x -dy -r bt848-cards.o bt848-driver.o
    bt848-kern.o i2c.o tuner.o sound-tda9875.o sound-msp3400.o
    -L/usr/lib -lc
    (NOTE: i used the flags -dy -r -L/usr/lib -lc)
    so far, the TV-TUNER is working hehehehe!!
    any comments/suggestions/tips from other people are still welcome!
    thanks!!
    -kllc

  • I need to download 11g for Solaris10 x86

    sorry for easy question.
    I hope to install Oracle 11g on Soalris 10 x86 with VMware.
    but I can't finding for a 11g x86.
    Where can I do that?

    user3531902 wrote:
    sorry for easy question.
    I hope to install Oracle 11g on Soalris 10 x86 with VMware.
    but I can't finding for a 11g x86.
    Where can I do that?You can not find it because it is not available. And, apparently it will not become available.
    According to information, you will need to wait until Oracle releases 11gR2 for Solaris x86. Unfortunately we have no date for that.

  • Mounting Solaris 8 formated disk to solaris10 X86

    I had purchased a 1 TB SATA hard disk and used a special adaptor from Acard to plug it into my scsi bus on a Pinnacle Data System computer (Sun Clone) and succeeded in making 137 GB partitions (slices) and suceeded in using 959Gb which is probably all of the disk anyway. I then had to loan my adaptor to a friend. Unfortunately before I could get it back I had to fly to Germany from California for an emergency sw issue. I then went to Scotland and used a SATA to USB adaptor to plug the hard disk into my E250. I had no problem mounting all the partitions and filling them up. Now my problem (finally) is that I loaded a spare disk for my Lenova T60 with Solaris 10 X86. Why won't the system mount any of the partitions of the TB disk?
    The system sees the device in the /dev/dsk directory but keeps telling me the device is already in use or the mount point is busy......I created the mount point. The system sees my 8GB corsair memory stick perfectly. I went into some other points and it seems the disk is an unknown format............what?
    Anybody got any ideas, let me know,
    Thanks, Mike
    ps: Sorry I was so long winded

    Hello Mike,
    Solaris x86 and Solaris SPARC ufs aren't interchangeable due to big-endian and small-endian dependance.
    http://forum.java.sun.com/thread.jspa?threadID=5088476&messageID=9307743
    http://mail.opensolaris.org/pipermail/ufs-discuss/2007-April/000857.html
    ZFS filesystems are interchangable between x86/x64 and SPARC.
    Michael
    Edited by: MAAL on Oct 9, 2007 8:42 PM
    Added a later google search hit.

  • Zones on Solaris10 x86

    I don't understand the licensing, support and platforms zones run on.
    1) Are zones supported on X86 Solaris?
    2) Are they available in OpenSolaris x86?
    3) I saw a demonstration of a really nice gui tool to configure and move zones, (Container Manager?), is that an additional product?
    Thank you,
    Hank

    1) Are zones supported on X86 Solaris?Yes
    2) Are they available in OpenSolaris x86?Yes
    3) I saw a demonstration of a really nice gui tool to
    configure and move zones, (Container Manager?), is
    that an additional product?You're probably thinking of Solaris Container Manager, which is an add-on product to Sun Management Center. Both of these are licensed seperately from Solaris. They do come with the Solaris 10 media kit (2 CDs with yellow labels) or can be downloaded at http://www.sun.com/software/solaris/sunmanagementcenter/.
    From the website:
    Note: Sun Management Center software can be downloaded free of charge, however a license needs to be purchased in order to use.

Maybe you are looking for

  • How to do disable the touchpad in windows 7?

    hi, i am using thinkpad edge 14, and i want to disable the touchpad, i think use mouse is enough for me. thanks. Glo.

  • How do I get Widgets back on my Dock and Flash Mcaromedia Problem

    I took off Widgets from my Dock last week, now I want it back. Could someone please tell me how to do so? I have done a search on the Macromedia Problem and I just cant figure it out! When I go on the Forums I get "The page "All things iPod, iTunes a

  • Pages to iweb

    Hi, I am wondering if it is possible to export pages created files and put them on to my website using iweb whilst still maintaing the pages format? Thanks

  • Error in delta

    Hello All. I have run a delta load from an ODS to a CUBE without PSA. Now I need to rerun that delta. How can I do it? Thanks all.

  • How can i pass the PROPERTY_FALSE  as string

    Hi, How can i pass the PROPERTY_FALSE & PROPERTY_TRUE as string to      Set_Item_Property('MY_BLOCK.MY_ITEM',ENABLED,PROPERTY_FALSE); my requirement is to write a procedure like enable_fields(P_PROERTY_VALUE ..) that enable or disable many items base