Bought and installing Logic X hope to use all my Pro Tools Stuff with Logic X to reduce the learning curve

Bought and installing Logic X hope to use all my Pro Tools Stuff with Logic X to reduce the learning curve for my Wife who is not very computer savy All her music  is 96K and degitized with Pro Tools from analoge 16track tape.

mende1 wrote:
Welcome to Apple Support Communities
Apple offered a refund for users who purchased Logic Pro 9 30 days or less before the Logic Pro X launch, but they don't do it anymore, so if you want to upgrade to Logic Pro X, you have to purchase it in the Mac App Store
Part of this is incorrect...
Some App Store employee's "accidentally" (but in good faith) issued refunds to a few users who had purchased Logic 9 within 30 days prior to the mid-July release of Logic-X. Word quickly came down from Apple HQ that this was against App Store policy and the practice was immediately stopped.
To the original poster.. you never stood a chance, even if they were issuing refunds you didn't fall within the 30 day period.  There were many who purchased Logic 9 a few days before the LX release who did not get a refund.

Similar Messages

  • Bought and installed a new battery for my Mac Book Pro 5.1, intel Core 2 dual, the computer makes a lot of noise! The noise disappears in sleep mode. What can be done?

    Bought and installed a new battery for my Mac Book Pro 5.1, intel Core 2 dual, the computer makes a lot of engine noise! The noise disappears in sleep mode. What can be done?

    I bought it from Other World Computer last week for $95. 3rd party, I suppose.

  • I JUST BOUGHT AND INSTALLED A LINKSYS E1200 WIRELESS N ROUTER AT HOME. MY IPHONE CONNECTS WITH A STRONG SIGNAL BUT WHEN I TRY TO USE THE INTERNET IT JUST LOADS FOREVER. HOW CAN I FIX THIS?????!!!!

    I JUST BOUGHT AND INSTALLED A LINKSYS E1200 WIRELESS N ROUTER AT HOME. MY IPHONE CONNECTS WITH A STRONG SIGNAL BUT WHEN I TRY TO USE THE INTERNET IT JUST LOADS FOREVER. HOW CAN I FIX THIS?????!!!!

    RESET YOUR ROUTER
    No. Reset your router.

  • I just bought and installed logic pro x. and after instal it is asking for synapse audio DUNE registration.. where do I get that?

    I just bought and installed logic pro x. and after instal it is asking for synapse audio DUNE registration.. where do I get that?

    http://www.synapse-audio.com/

  • I just bought and installed the Adobe Illustrator. I would like to know how long can I use the product before an extension is needed?

    I just bought and installed the Adobe Illustrator. I would like to know how long can I use the product before an extension is needed?  And on how many computers can I install this product? Thanks.

    What version exactly did you buy? If you bought CS6, then the license is perpetual and doesn't need any extension. If you bought CC, then you need to renew your plan every year. You can install each Adobe software on 2 machines with a single license for non-concurrent use.
    Mylenium

  • I'm a new user and learning, I bought and installed Premiere Pro cs6.  I got a nice video clip but has a baby cried in the background and very annoying.  My question is, is this noise remover is separate from the cs6 or I need to get this software downloa

    I'm a new user and learning, I bought and installed Premiere Pro cs6.  I got a nice video clip but has a baby cried in the background and very annoying.  I have tried all of the sounds in Prem cs6 but didn't work. My question is, do I need to get a separate sound software download and install to be able to use it?

    In the CS versions, there was some audio capability in PrPro but you needed to get a separate audio program for major work. Lessening a baby definitely qualifies as major work. That's lessening, i dont mean eliminating. Adobe's audio program is Audition. There are others "out there'. In the CC versions one just downloads Audution also.
    Neil

  • Why does the charger not charge my battery?  I just bought and installed a new battery from Apple (direct) today

    Why does the charger not charge my battery?  I just bought and installed a new battery from Apple (direct) today

    yes, the charger was working before. 
    so far i have:
    1.  updated my software
    2.  updated to battery 1.2
    3.  took off the "duck" plug and used the macbook pro cord that was provided
    4.  checked and cleaned the pins on the magsafe
    5. checked and cleaned the magsafe port
    any ideas?  i appreciate your response!

  • I own two i macs. I bought and installed Lion on one computer. How can I install Lion on the other computer without additional charge?

    I own two I macs. I bought and installed Lion on one computer. How can I install Lion on the other compute without additional charge?

    If it's the same email address Apple registration on both, use the 2nd computer and go to the App Store and find Lion. If different, use the second computer but log in to the App store with the address you used on the first go round. The buy button should instead say install. Then go through the same process again.

  • I have recently purchased a macbook pro and i gave my macbook to my wife, how can she recover the apps i bought and paid for so she can use the Pages, Numbers and Keynote

    i have recently purchased a macbook pro and i gave my macbook to my wife, how can she recover the apps i bought and paid for so she can use the Pages, Numbers and Keynote

    If you bought/paid for them in the Mac App Store, you would just need to sign in to the MAS with the Apple ID you used to purchase them, go to purchases, and click install.
    As for the limited licensing that Bordy brought up, the TOS for the MAS states:
    "Apps from the Mac App Store may be used on any Macs that you own or control for your personal use."
    If you installed them from an iWork disc, just pop the disc back in and reinstall.
    Regards,
    Gnomish8

  • My e-mail has changed, but I purchashed some songs in iTunes using my old e-mail address as my account name... so when I try to play the sonngs I bought and paid for - it keeps asking me to authorize my PC first, but I don't remember the password!

    My e-mail has changed, but I purchashed some songs in iTunes using my old e-mail address as my account name... so when I try to play the sonngs I bought and paid for - it keeps asking me to authorize my PC first, but I don't remember the password! And since the old e-mail address is no longer active, I can't even chenge the password- becasue it's sends the link to do so via e-mail!  Even when I use the "ask personal questions" option to verify and it asks me for my date of birth, I put it in and it still won't acccept.

    Hello there, loupar.
    The following Knowledge Base article offers up just how to change your Apple ID for the App Store on your iOS device:
    iOS: Sign in with a different Apple ID in the iTunes Store, App Store, and iBooks Store
    http://support.apple.com/kb/ht1311
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • I am running Yosemite and have just bought Pro Tools Express with the intent to Upgrade to Pro Tools 11. Pro Tools Express is not compatible with Yosemite and will not install. How can I get this done?

    I am running Yosemite and have just bought Pro Tools Express with the intent to Upgrade to Pro Tools 11. Pro Tools Express is not compatible with Yosemite and will not install. How can I get this done?

    I have had this problem for close to a year. I have an Extreme base station, two Airport Express's and multiple G4 Mac's with up to date software. I have spent a huge amount of time trouble shooting, resetting, reapplying software and finally calling Applecare without any help. It would be great to get this problem solved.
    Powerbook G4   Mac OS X (10.4.7)  

  • How do i get rid of the annoying pop up for the adobe trial after i have bought and installed adobe pro?

    How do I get rid of the annoying pop up from the adobe trial after I have bought and installed adobe pro?

    This isn't an annoying pop-up. Rather, it is seriously telling you that it doesn't know that you have licensed the software, and it will continue to be a trial, and will stop when the 30 days are up.
    So you must tell it that you have licensed the software.

  • Just bought and installed update for elements but app won't take my serial #

    Just bought and installed udate for elements mut app wont accept serial #

    Hi [email protected],
    Please refer the kb: http://helpx.adobe.com/x-productkb/global/my-serial-number-doesnt-work.html .
    Regards,
    Romit Sinha

  • I just bought and installed mountain lion, and I can't get to sign in to hotmail.Can I get some help please. Thanks.

    I just bought and installed mountain lion, and I can't get to sign in to hotmail after several trials. I need help please. Thanks.

    so its in a forum, which I didn't stumble upon because it wasn't anywhere in the adobe troubleshooting steps for Windows 8 that automatically came up for me when I clicked that I couldn't see the test flash movie on their site. I guess if I spent another half a day googling I might have found it.
    BTW, unchecking Active X filtering in IE10, was NOT the fix. I had to go into the security tab, and change the custom active X setting I listed above. So this link you provided which mentions unchecking Active X filtering was not the fix that worked in my scenario.

  • After erase and installing when i try to use classic it says not installrd

    I have tried to open classic in system preferences/system. It said that i do not have a version of mac os 9 installed.I have tried the imac software install and restore disk, followed the instructions. When I get to the install it says to put in the disk I am already using in. So I eject it and put it back in, and nothing happens. Just in case I have tried the hardware test disk as well, however the only file on inserting this disk is, read me first. so i am at a loss any help would be great.

    If you have an external hard disk drive, formatted for use
    with Mac OS (HFS+) you could attach even a USB 2.0
    unit to a computer and have a Classic OS9.2.2 system
    installed on there; and direct OS X system 9 preference
    to look there to find it. If you can get a copy of OS 9.2
    on such a drive, it will work adequately and that should
    also have an Applications 9 folder with it.
    Since you can drag/drop an OS 9.2.2 system (unlike X)
    an external drive installation can be done from any Mac
    with an OS 9 system folder. However, that may not be
    a correctly licensed copy (unless a backup of original)
    and from someone else's computer, it may have extra
    OS9 apps and unneeded stuff cluttering it up.
    You should be able to put the second original installer
    disc into the computer and have the OS9 Classic system
    install into your computer from there. The system is
    small and for the most part takes little room on a hard
    disk drive; be that an external or an internal one. I have
    an OS9.2.2 system and Applications-9 folder on a small
    external USB 2.0 HDD and my iBook G4 can see & use it.
    (My iBook came with the OS 9.2.2 installer on second disc
    but it was not installed on my computer; so I never put it in.)
    With a system on an external hard disk drive, you have to
    be sure it is properly unmounted and the icon representing
    it which appears on the desktop when it is mounted, is not
    there; you can 'eject' such a disk, or drag it to trash; after
    quitting whatever you were running from said disk drive. At
    some point, if it will not unmount, (as I found) you may have
    to mess around and be sure to try to quit whatever app or
    system - this may involve relaunching it again - to make sure.
    {You have to unmount the external drive before turning it off
    or unplugging it, to not damage the directory or contents on it.}
    If you install direct to the computer's own internal hard disk
    drive, and it is not partitioned, you should not worry about this.
    On first-run of System Preference's 9 Classic start, your
    system may have a dialog box saying something to the
    effect that your Classic system needs an update, and do
    you want it to do that? (not exact words) Click yes. And
    then also, when you run Disk Utility to repair your OS X
    system's 'repair disk permissions' notice under one of
    the main Disk Utility menu bars, you can Repair OS9
    Permissions. Do that, too. This can be done separate.
    Good luck & happy computing!
    edited.
    PS: There may be another source for drivers so you
    won't have to install Classic OS9 to just use a basic
    scanner. There are third-party drivers out there and
    some of them are free. Sometimes, one from a similar
    model number, at times, a few model numbers removed
    may work fine in a slightly older model scanner or printer.
    Some of the scanner drivers may cost a small fee and
    are downloaded from a site online.
    (Since Tiger is the last OS X system to support Classic,
    if you still need most of Classic beyond peripheral drivers
    weigh this before upgrade considerations to Leopard.)

Maybe you are looking for

  • Remote and keynoteRemote connection problems

    Hello I have installed the Remote App, and bought KeynoteRemote, but I cannot make any of them talk to my Macbook correctly. IpodTouch (2G, fw2.2.1), Remote.app (1.2.1), Macbook alu (10.5.6), Itunes (8.1.1). Ipod and Macbook are on the same Wifi netw

  • Gfx card problems

    Ok some of you might have seen my post on the problems with raid that i am having. well this morning i went to boot up my system and it says that the power connecter is disconnected from my gfx card but it isn't??? i tried using different cables etc

  • How to display % in the report results

    Hi Experts I my BW report i am calculacting % using Calculacted KF. I want to display "%" in the report Ex: 2.5 should be displayed as 2.5% How can i achieve this

  • Installing kb2992611 - error message "the update is not applicable".

    Hi, When installing offline patch for kb2992611 on my windows server 2008 R2 enterprise server, I get the error message stating that the update is not applicable to my computer. On another windows server 2008 R2 enterprise server I am able to install

  • OTA update for iPad1

    Can you update the iPad1 to iOS5 OTA and if so, where do you start?  I can't find "software update" in "Settings".