Box in SAPscript-Help Needed.

Hi ,
    I want to make a box in script which it shud not hav any columns or rows. The box shud hav 4 lines of contents withan font of 10. Also i want to split the box in the centre. Kindly give some piece of code for it. It shud be helpful to me.
    Also is ther any way to assign the SAPscript windows only on last page  or windows only on first page option (i.e) option like in smartforms.
Thanks and regards,
Karthik

Hi,
It is very easy to create any BOX in script, Below is the command for same,
Create Boxes in the SAPscript using the BOX command specifying
the x,y co-ordinates and the width and the height
/: BOX XPOS '0' CM YPOS '0.5' CM WIDTH '9.2' CM HEIGHT '3.5' CM FRAME 8 TW
Try with this I know handle a BOX is difficult.
2. You can create a Static Window and can call it on Last Page.. I will work..
Edited by: Lokesh Tarey on Jul 30, 2010 8:23 AM

Similar Messages

  • How disable smartcut  section select box? Wayne help needed!

    Dear friends
    I disable smartcut section select box with Toolbar=Navigation parameter in link
    http://localhost:45000/workspace/browse/get/KursHYP2008/siyavus/BimR.bqy&user=admin&pass=password&Toolbar=Navigation
    but when I login in LoginDash and activate another section, the section select box is activated on menu again!
    regards

    Can you be a little more descriptive on what you need here and explain what exactly you want to be changed.

  • Validation of check boxes...help needed

    Hi
    I have a form in which i need to do a validation between several check boxes there are two categories fo check boxes i want a validation so that one category of the check boxes are checked at a instance
    I am using the following code ..but i think the code is all wrong
    DECLARE
    l_concat VARCHAR2(6);
    l_concat_1 VARCHAR2(6);
    BEGIN
    SELECT BULLAE_FLG||CHERRY_RED_FLG||CYANOTIC_FLG||FLUSHED_FLG||GREY_FLG||JAUNDICED_FLG ||MOTTLED_FLG ||PALE_FLG ||PINK_FLG ||PURPLE_FLG into l_concat FROM SKCOLOR;
    select normal_flg into l_concat_1 from skcolor ;
    IF l_concat IS NULL THEN
    IF l_contact_1 IS NULL THEN
    return false;
    ELSE
    RETURN TRUE;
    END IF;
    ELSE IF l_concat IS NOT NULL THEN
    IF l_contact_1 IS NOT NULL THEN
         return false;
    ELSE
         RETURN TRUE;
         END IF;
    ELSE
    RETURN TRUE;
    END IF;
    END;
    any suggestions ....thanks in advance

    HI,
    Can you eloborate your problem still more clearly.
    Morever i think you need to increase the size of the l_concat, you are concatenating more than 10 flags into a variable of just 6 which will throw an exception,

  • Help Needed - FusionFx Style - How do I remove the Dashboard Grey Box Section, so that Dashboard Background is Blank

    Help Needed - FusionFx Style - How do I remove the Dashboard Grey Box Section, so that Dashboard Background is Blank
    We like FusionFx Style but would like to keep the background white like blafp style.

    Can you be a little more descriptive on what you need here and explain what exactly you want to be changed.

  • Every time I open an app a box appears saying I need to connect to iTunes to receive push notifications. I go to iTunes and I'm already logged in,so I'm not sure what to do. Can anyone help?

    Every time I open an app a box appears saying I need to connect to iTunes to receive push notifications. I go to iTunes and I'm already logged in,so I'm not sure what to do. Can anyone help?

    Use Lion Recovery to repair the startup disk if necessary, or reinstall the Mac OS X.

  • PLEASE HELP ME.  Some important emails have gone to an archive mail box and i really need them.  Can someone please help me with how to view the archive email box and the emails that are in there?

    PLEASE HELP ME.  Some important emails have gone to an archive mail box and i really need them.  Can someone please help me with how to view the archive email box and the emails that are in there?

    http://kb.mozillazine.org/Recovering_deleted_mail_accounts

  • I am trying to buy an app (Aperture). I don't see a "buy" icon in the app store. If I go to Apple site, there is a buy icon but when I click it, I get a dialogue box saying the link needs to be opened with an application. Please help. Thanks.

    I am trying to buy an app (Aperture). I don't see a "buy" icon in the app store. If I go to Apple site, there is a buy icon but when I click it, I get a dialogue box saying the link needs to be opened with an application. Please help. Thanks.

    Hi ...
    Installing the OS X Lion Update 10.7.3 (Client Combo) will reinstall the App Store for you.
    Restart your Mac after the combo is installed then try purchasing Aperture.

  • Hi. I am reinstalling Macbook Pro OS X from the "question mark icon". During process, there is a question "select the disk where to install Mac OS X" but there is no option/selection in the box. I really need your help guys. I need it badly. :'(

    Hi. I am reinstalling Macbook Pro OS X from the "question mark icon". During process, there is a question "select the disk where to install Mac OS X" but there is no option/selection in the box. I really need your help guys. I need it badly. :'(

    If you got the question mark and you do not see any partition to install OS X to, it is not good.
    Close the OS X installer by pressing the red button at the top left corner of the Install OS X window, and open Disk Utility. Then, look at the left sidebar and tell me if you see your hard drive. You should see something like this:
    Do not worry if you do not see Macintosh HD or if the option with an arrow shows a different name. This is normal.
    If you see it, choose it, go to the Erase tab and erase the drive. Finally, close Disk Utility and reinstall OS X. You will lose everything if you do not have a backup.
    If you do not see the drive, it is damaged and it has to be replaced. You can replace the hard drive of a MacBook Pro without voiding the warranty, and any 2'5" SATA hard drive is valid. If you are not an experienced user or you do not want to go inside the MacBook, take it to an Apple Store or reseller.

  • I have a MacBook White.  Everything worked great with Snow Leopard including Mathematica, and all Pogo games. I downloaded Lion two days ago and now neither program works.  The box states that I need J/Link, and/or java runtime.  Help.

    I have a MacBook White, early 2009 model, just downloaded/installed OS X Lion.  Everything worked well with Snow Leopard - Mathematica, pogo.com games. Now, with Lion, I am getting a box that states I need J/Link, and/or java runtime.  Software update feature states all software is up to date.  Help.

    StoneComputers wrote:
    What about the incredable lag time from clicking on a program to the time it opens (or the time till the loading screen starts)? I wish I could record it and play it so I could see if thats normal from other members... the icon just sitting there for over 35 second (I just counted 36 till the loading screen popped up) at first I thought it was me not clicking hard enought cuz the mouse button I have is real stiff (any ideas on that?) but no it takes that long just to get to the app loading screen... this happens every time same amount of time with the 3 programs I use the most, prolly more but I know for a fact world of warcraft, uTorrent, and Google Chrome. I would just chalk it up to slow hardware but they load real quick in windows 7 and once this bad spot is loaded the program runs so fast and nice afterword. Maybe some tweeks? I wonder if this would happen in Snow?
    The coment "few outdated programs" Ive seen alot its not just a few its a lot and since games are not Apple's strong point I would think they would want to keep as many as they could...
    An example of the rants you will see from a lot here. Don't be put off as these problems are generally user specific, and these same old comments come out after the release of every OSX I can remember. When Lion is upgraded  to the next OSX you can gaurentee these forums will be full of people screaming about how great Lion was. Happened with Tiger, Leopard and Snow Leopard.
    So come to think of it you may be better off Googling sites that give you unbiased views on Lion, rather than expect any positive comments here. For every one complaint there are probably 100,000 people with no issues.
    Cheers

  • Help needed! Raid degraded again!

    Hi!
    Help needed! I hava made bootable RAID with two S-ATAII 250Gb HDD and its not working! Every now and then at bootup I get a message RAID -> DEGRADED... Must be seventh time! Rebuild takes its own time!
    What am I doing wrong!
    T: Ekku
    K8N Neo4 Ultra
    AMD 64 4200+
    2 Gb RAM
    2 x 250 Gb HDD (Maxtor)
    nVidia RAID (in mb)
    P.S. I wery SORRY with my poor language!

    I'm going to blame the nVRAID because I've seen issues with it in the past. If your motherboard has another non-nVidia RAID solution, use that instead. Using the nVidia SATA ports as BASE or JBOD is fine and dandy but RAIDing always had issues. It's not even a driver issue I think it's just instability. Latest drivers and even boxed drivers never helped. Granted, some will report success with their rig. But on a professional level I've seen nForce issues on different motherboards and different hard drives that had RAID disaster stories.
    Good luck and if you don't have another RAID solution, my suggestion would be to buy a dedicated RAID controller card.
    LPB

  • Help needed on CD740 ???

    Help needed on CD740 ? My CD740 is GREAT , well , it was great !!? The sound and general performance are wonderful , but , it now has a fault !!? Shock Horror !!
    What can it be ?!!? Well , the display illumination has failed , as in , there isn't any !!? Have to use a torch to read it !!? Not good. Now , here's the thing , I want a phone number (UK zone) ?to talk to an actual human and I cannot find one !!? That is soooooo annoying !!? The unit is out of warranty so I want to repair this myself , no worries , I once worked for Philips in their pro studio equipment repair workshop so I know my way around black boxes !! I would like a service manual though so that I can get the case apart without damage. So , can anyone help me with a phone number , pretty please ?!!
    Thanx.

    I tried compling servlet, but it is raising error
    that coul not find package javax.servletWhat I did not mention... you need to add those JARs in the Classpath explicitly. You will find them in %TOMCAT_HOME%\common\lib. You atleast need to add servlet-api.jar to your Classpath. :)

  • Help needed with itunes

    help needed with itunes please tryed to move my itunes libary to my external hard drive itunes move ok and runs fin but i have none of my music or apps or anything all my stuff is in the itunes folder on my external hard drive but there is nothing on ituns how do i get it back help,please

    (Make sure the Music (top left) library is selected before beginning this.)
    If you have bad song links in your library, hilite them and hit the delete button. Then locate the folder(s) where your music is located and drag and drop into the large library window in iTunes ( where your tracks show up). This will force the tunes into iTunes. Before you start, check your preferences in iTunes specifically under the"Advanced" tab, general settings. I prefer that the 1st 2 boxes are unchecked. (Keep iTunes Music folder organized & Copy files to iTunes Music folder when adding to library). They are designed to let iTunes manage your library. I prefer to manage it myself. Suit yourself. If there is a way for iTunes to restore broken links other than locating one song at a time I haven't found it yet. (I wish Apple would fix this, as I have used that feature in other apps.) This is the way I do it and I have approx. 25,000 songs and podcasts and videos at present. Hope this helps.

  • URGENT HELP NEEDED ... Tomcat Realm and JRE1.4 plug-in problem

    I have tried the Security Realm of Tomcat. Since I do not have
    an LDAP server, I decided to use the Tomcat-users.xml file in
    Tomcat\conf directory.
    I added the following lines of code in the web.xml file.
    <security-constraint>
    <web-resource-collection>
    <web-resource-name>Entire Application</web-resource-name>
    <url-pattern>/*</url-pattern>
    </web-resource-collection>
    <auth-constraint>
    <!-- NOTE: This role is not present in the default users file -->
    <role-name>webviewer</role-name>
    </auth-constraint>
    </security-constraint>
    <login-config>
    <auth-method>BASIC</auth-method>
    <realm-name>Tomcat Manager Application</realm-name>
    </login-config>
    The <role-name> "webviewer" is added into "Tomcat-Users.xml" as the following:
    <tomcat-users>
    <user name="test" password="password" roles="webviewer" />
    </tomcat-users>
    So, now when we type the url: http://localhost:8080/adbpdbre/default.htm, TOMCAT shows a dialog box asking for UserName: and Password:Now, only when we give the username and password, it shows the page. This is exactly what we want.
    But the problem now is, this default.htm page, has 5 links to 5 applets. The first time that I click on one of these links, the JRE plug of 1.4 shows a dialog again asking for the username and password. Till I dont provide the username and password the system doesnt go ahead and applet doesnt load. I do not want the JRE to ask me for the username/passwords again..How to avoid this ?
    Can you give me some more information on this. Ultimately in the production usage, we will be using LDAP and not Tomcat's memory realm.
    URGENT HELP NEEDED ... I need to get back to my client on this.
    Help would be v. much appreciated.

    In the config file, you 're essentially saying that you want Tomcat to prompt for usr/passw on every request (url-pattern = /*) made by a 'webviewer', and that's exactly what Tomcat is doing.
    Consider using specific url-patterns & roles for resources to be protected. If for now, all you need is to protect the first page, use a more specific url-pattern.
    Just an advice : if you'll be using LDAP in production, do not waste time with Tomcat's Security Realm and the BASIC authentication type, since the two have not much in common. Start reading doc on LDAP, and code a prototype, or even better, a vertical slice of the app (i.e a proof of concept).

  • URGENT HELP NEEDED - iPhone 3Gs no longer detected or charged by MacBook

    My iPhone 3Gs (3.1) has been running fine, until several hours ago today, when I plugged it to my MacBook, the iPhone is no longer detected - it doesn't show up in iTunes, nor it is charged. I tried opening iPhoto, and it wasn't there too. Not with Image Capture too. I tried charging it using the out-of-box wall charger using the same out-of-box USB cable I use for MacBook, and it can be charged without any problem. Then I put it into Recovery mode, and there iTunes can see it. I don't want to restore it before I figure out exactly what went wrong, as I don't want the restore process somehow gets stuck in the middle that the connection is lost again.
    I've tried reinstalled iTunes, including completely removal of Apple Mobile Device Support, as instructed by Apple. But still no luck.
    I've tried switching to another USB port of my MacBook. No luck.
    My iTunes is the latest 9.0.1, and my Mac OSX is 10.6.1. My iPhone is on 3.1, upgraded from 3.0.
    I've read from web that it seems I'm not the only one out there having this problem. But none of them seem having any real working solution.
    Urgent help needed & appreciated. Millions of thanks in advance.
    Gary

    1. I used both cables - theirs & mine ... and on several macs
    2. yes, same cable for wall & mac
    3. as said, i did completely remove & install itunes (incl. apple mobile device support), as instructed on the apple webpage
    anyway, did a restore just now. it seems okay now. but the problem is i have no idea what cause this, and i can't replicate the problem. so i don't know when it will happen again ... maybe a bug with os 3.1 ... others on web said os 3.1 is quite buggy ...

  • Help needed with this form in DW

    Hi, i have created this form in dreamweaver but ive got this problem.
    In the fields above the text field, the client needs to fill in some info such as name, email telephone number etc.
    But the problem is when ill get the messages. Only the text from the large text field is there.
    What did i do wrong??
    http://www.hureninparamaribo.nl/contact.html
    Thank you
    Anybody??

    Thank you for your response. So what do i have to do to fix this?
    Date: Sun, 20 Jan 2013 07:57:56 -0700
    From: [email protected]
    To: [email protected]
    Subject: Help needed with this form in DW
        Re: Help needed with this form in DW
        created by Ken Binney in Dreamweaver General - View the full discussion
    You have several duplicate "name" attributes in these rows which also appears in the first row
    Telefoon:
    Huurperiode:
    Aantal personen:
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5008247#5008247
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5008247#5008247
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5008247#5008247. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Dreamweaver General by email or at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Maybe you are looking for