BP that has multiple "ship" to addresses
For a BP that has multiple u201Cship tou201D addresses in their BP u201Cmaster datau201D, how do we select the correct address at the point of sales order entry? The only way we can do it at present is to alter the u201Cset as defaultu201D address in the BP master data prior to entering the sales orderu2026.Surely there is a way we can select from the u201Cship tou201D addresses without altering the default address all the time?
Would you be able to advise how B1 would work for the following please: create purchase orders for items that need to be u201Cshipped tou201D different locations from the same BP (supplier)?
For a BP that has multiple u201Cship tou201D addresses in their BP u201Cmaster datau201D, how do we select the correct address at the purchase order entry? The only way we can do it at present is to alter the u201Cset as defaultu201D address in the BP master data prior to entering the sales orderu2026.Surely there is a way we can select from the u201Cship tou201D addresses without altering the default address all the time? Pls advise.
Similar Messages
-
Sending an email to one contact that has multiple e-mail addresses?
This has to be really simple, but I can't find the answer....One person(contact) that has multiple e-mail addresses...can I not send to all their addresses at once?
This has to be really simple, but I can't find the answer....One person(contact) that has multiple e-mail addresses...can I not send to all their addresses at once?
-
I have a form that has multiple fields but has 5 sections. I have used mail merge to insert information but I can't get Excel to recognize that I need different names and addresses for each section. Please help.
Thanks for your response. I do believe I have the information needed for each form on a separate line in Excel. There is a first name, middle name, last name, city, and zip column. And field is entered on a different line for all the information. I'm really stuck.
-
Can anybody help please How do I Format address panel in iCal to show Department from the address book. At the moment it is showing 'Job Title' even though that has been removed in Address Book.
I have a similar problem. I actually spoke with a Paypal customer Representative a few months back who informed me that they had deleted all of my previous *Hidden* Address but when I just purchased an item today on a online merchant's site that I had never been to before and checked out using their Paypal option, I noticed that my default shipping address was in fact my old address and when I went to change the address to my current address, I noticed all of the old addresses I ever used were still there. I've just spoken with 2 separate paypal representatives who confirmed on their end that all of the old address have been deleted and the only one they have on file is my current address. Can anyone provide me an explanation as to why the old hidden address can still be showing up when I check out on merchant's sites using paypal even after they've seemingly been deleted? The last Representative suggested clearing out my browser's cache, but I don't believe that will resolve my issue. Thank you in advance.
-
How do I delete and iCloud account that has a former email address and I can't remember the password. All attempts to recover the password have failed!!
Hello there, Gary7023.
The following Knowledge Base article made prove useful for you with the issue you're having:
iOS 7: If you're asked for the password to your previous Apple ID when signing out of iCloud
http://support.apple.com/kb/TS5223
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D. -
Can you link a folder that has multiple files
I have DW CS4. Is it possilbe to do a link to a folder that has multiple files. What I'm trying to accomplish is a link that will have multiple chocies of what months results people will be able to choose.
This is not something that is the simplest thing to do and will require some server side programming. With Godaddy there are 2 hosting plans that they offer, one for Windows and one for Linux. If you got the Windows plan you will need the script in ASP, which I admit I am not well versed in which is why I asked the question earlier. If you have the Linux plan with PHP I could help you out a little. To be honest if you do not have a lot of experience with programming I would probably recommend that you use the Jump menu in Dreamweaver (under the forms tab of the insert toolbar). That will allow you to have a link to a page from one month's results.
Otherwise what you end up needing is a form that stores the results as an array and then you run a loop on the display page to include files based on what is stored in the array.
It can be done, but from the sounds of your experience I would recommend taking it one step at a time and learning along the way. -
How to I upload a folder that has multiple files in it?
How do I upload a folder that has multiple files in it? I need to upload an entire folder onto a web page but when I choose the folder it opens it up and becomes individual files instead of just the one folder.
You generally can't upload a folder to a website, but some sites allow you to select multiple files. You'll have to refer to the specific website instructions to see if that's possible.
Alternatively, it might be appropriate to first compress the folder in the Finder using rightclick, then "Compress", which creates a single .ZIP file - then upload this file.
Matt -
I am trying to hook up a airport express from a work server that has a assigned ip address. the airport works but no internet
Encryption wouldn't matter except for Wifi.
While 10.2 might help, there's not much you can do on the Internet these days with less than 10.4.11
Tiger Requirements...
To use Mac OS X 10.4 Tiger, your Macintosh needs:
* A PowerPC G3, G4, or G5 processor
* Built-in FireWire
* At least 256 MB of RAM (I recommend 1GB minimum)
* DVD drive (DVD-ROM), Combo (CD-RW/DVD-ROM) or SuperDrive (DVD-R) for installation
* At least 3 GB of free disk space; 4 GB if you install the XCode 2 Developer Tools (I recommend 20GB minimum)
http://support.apple.com/kb/HT1514
http://www.ebay.com/sch/i.html?_nkw=mac+os+x+tiger+retail+10.4
See Tom's, (Texas Mac Man), great info on where/how to find/get Tiger...
https://discussions.apple.com/message/15305521#15305521
Or Ali Brown's great info on where/how to find/get Tiger...
http://discussions.apple.com/thread.jspa?messageID=10381710#10381710
As far as Memory, that's sort of easy, find your eMac here...
http://eshop.macsales.com/MyOWC/Models.cfm?Family=emac&sType=Memory
As far as Hard Drive, it's not easy to replace the Internal drive, I'd maybe suggest an external Firewire drive to boot from...
http://eshop.macsales.com/item/Other%20World%20Computing/MAU4S7500G16/ -
Just don't want to find out Wednesday that my order was cancelled or delayed because the credit card has a different billing address than the account. If they check the validity of the card at the time you pre-order I don't see it being a problem.
Oh, should mention I ordered right at 3AM (EST) on the 12th and got a Confirmation email with a Deliver by: 9/19/14 but when you try the "Check Status page" it spits out "Expected Ship Date: Not available at this time."
-
First of all I'm wiling to buy as many apple TV's as needed, so my question is not about how to do everything with one Apple TV device...but rather how to get multiple Apple TV devices in the same general location of the house to work without interfearing with one another. We bought a new (2nd) TV for the entertainment room so that our kids could use the 2nd TV for putting stuff up (via Apple TV airplay) from their phones and ipads...and still watch TV on the other TV.
Well, it turns out they often don't want to watch TV but rather use airplay from different devices on BOTH TV'S. Currently, we have one (2nd or 3rd generation) apple TV already and one problem/issue I have noticed was that if someone (Watcher #1) was already streaming to the Apple TV via airplay...a second person (Watcher #2) using a different device (iphone, ipad, etc) could send something via airplay to the same Apple TV which would automatically "override" and cause Watcher #1''s program/video/pic to stop and thus allow Watcher #2 to start watching...much to the annoyance of Watcher #1. (With 2 kids you can just imagine the arguing and fighting that goes on)
So, besides trying to eliminate this "battle of the airplays"...I'm curious if we buy a second Apple TV for the same room...how can we hook it up so there is no conflict...and how will which apple TV know which device is trying to to send airplay to it. I get the feeling that that we will end up with 2 TV's playing the same feed from one device...unless there is a better and more proper way.
Also, I would like to add a3rd Apple TV device to the TV in our home office so that I can use as well...but because of the close proximity to the entertainment room...I fear that if I try to send a feed to the apple TV in the office it will start to play on the TV's in the entertainment room.You can have as many ATV's as you want, but I STRONGLY STRONGLY STRONGLY encourage you to use wired connections on all of them. AirPlay is a god awful bug ridden failure prone feature under the best of circumstances. Using it over WiFi is much worse. And the band width load of three different devices connection to your WiFi access point to three different ATV's (total of six concurrent connections) will very likely over whelm your WiFi hardware.
I actually encourage people to always use a wired connection with ATV in general. It saves a LOT of head ache and frustration. With three it is even more important. As far as controlling which one you connect to. They are three separate devices. You select which one you want to send something too. So if you want to send something to the one in your office then just select that ATV. It would probably be good to setup their names to be the location. So something like "Office Apple TV".
As far as kids being brats and intentionally interrupting each others AirPlay connections... Well there is only so much Apple can fix. If someone else on the network that has access is deturnomand to be a jerk and interrupt someone else content they would be able to. -
Multiple Ship To Address in a Purchase Order
Can we have multiple ship to adresses in a Purchase Order in SAP Business one.
SAP does not give you an option to select different ship to addresses in purchase orders unless you are using a drop ship warehouse.
Thanks
Murtuza -
Query create on Master Data for the items that has not shipped
Hi all,
Is it possible to report/query on Items on Master Data that has not inoviced or has not been shipped?
Running query on Sales overview cube will not bring the right data since that cube only captures the items that was invoiced. Please help!
Thanks in advance,
BW
P:S Points will be assigned.Hi,
if u are using BI-7 for scenarios like this they have designed info set to include 2 cubes,
as info set brings intersection data u can opt for infoset, build info set on cube and ur master data then u will get the result this will be better as per performance issue.
if u are using BW then if data flow is from ODS -> CUBE then u can build infoset on ODS and master data it will be good.
if u want replacement path then u have to use RRI that is report to report interface. build char variable on ur info object in cube query so that it will brings orders which are shipped.
then build another char variable in master data query and processing type as replacement path to char var built on first query. and exclude those values which first var brings.
assign points if it helps,
thanks,
pavan. -
How do I select a section that has multiple layers?
I cannot figure out how to do this.
I work with large city maps. What I need to do is select a rectangular portion of the map, cut it and paste it into a new file. From there I edit that section as needed. I can use the selection tool and select an area, but what it does is selects the area and any joined lines. This map is over 11 layers thick.
Every help manual online has only pertained to working with a single layer.
Is it possible to cut out a rectangular section from a multiple layer project?
Any help would be appreciated.
Thank you in advance.You can make an artboard to the rectangle shape ( you do this by holdog the shift key down as you drag the artboard tool to make the new artboard within an artboard) you need then select the artbord tool while holding the option key down to drag a duplicate of the artboard and its contents to a portion of the canvas not being used by the orignial document.
Now some of the items that extend beyond the artboard will be copied as well
now you can draw a rectangle to match the artbaords dimensions and while it is still selected go to Object>Path>Divide Objects Below.
the delete the objects out side of the rectangles dimensions including any part of the rectangle youse to divide the objects below with.
One problem with this method any open path will not be divided so you have to manually scissor them and then delete.
The good thing about this is that the layers remain intact and all layers are copied.
Once deleted the extraneous art you can marques select the cropped art and either copy and paste or cut and paste.
Or just leave it in the document as a separate artboard -
Insert a field twice (that has multiple values) onto same row in report
I am new to design so hopefully this is an easy question...
I have three tables in my report that are linked.
Table 1 "TMDE"
Mfg
Model
Type_Id (Linked to "FEE(PRICE)"
Table 2 "FEE"
Price
Service_ID (Linked to "SERVICE(ID)"
Table 3 "SERVICE"
ID
Service_Type
What I am trying to do is create a report that displays two different prices based on two diffent Service "ID"'s on the same row.
My report keeps creating a second row for the second Service "ID"
Example:
MFG MODEL TYPE PRICE
Fluke 87 Calibration $40.00
Fluke 87 Calibration w/data $60.00
What I woiuld like to see is:
MFG MODEL Calibration $ Calibration w/data $
Fluke 87 40.00 60.00
Can you help?Thanks Noel but I don't think that is the answer.
Let me try to explain a little further...
My TMDE table has a field called "Type_ID". Let's say that record 1 has a "Type_ID" field value of 27. The "Typer_ID" field is linked to the PRICE table. The linked field in the PRICE table is called "ID" "ID" may have several 27 valuies for the different prices. These prices are based on the PRICE"Service_ID" field.
Hopefully, this will explain it better...
TABLE:TMDE
MFG:Fluke; MOIDEL:87; TYPE_ID:27 (linked to PRICE:ID)
TABLE:PRICE
ID:27; FEE:40; SERVICE_ID:1 (linked to SERVICE:ID
ID:27; FEE:50; SERVICE_ID:2 (linked to SERVICE:ID
ID:27; FEE:60; SERVICE_ID:3 (linked to SERVICE:ID
TABLE:SERVICE
ID:1; TYPE:Calibration
ID:2; TYPE:Calibration w/data
ID:3; TYPE:Calibration-Accredtied
What I would like to see is:
MFG MODEL Calbration price Calibration w/Data Price
Fluke 87 40 50
Thanks -
Hi,
We're looking for a solution where a PDF can be created and distributed to multiple people - each with their own username/password to open - and also when opened created a user based water mark on the document. Is this something that can be done inside Acrobat Pro or is there a higher end product that does this?
Thanks!If the list of people who and only who you want to be able to open this PDF is predefined, then you can use Certificate Encryption in Acrobat. For this method to work each of possible recipients of the encrypted PDF needs to procure a digital certificate with a private key enabled for encryption and send you the public key version of this certificate. Then you encrypt this PDF with public key certificates (there may be many of them) of all recipients you want to be able to open this PDF. Then you distribute this PDF to all recipients and each of them can then open this PDF with their private key certificates.
You can also create PDFs with Optional Content which contains different watermarks with the selector for a watermark based on user ID or some other identification of the user. I do not know, though how to create such Optional Content using just Acrobat Pro. You may need to write a plugin to Acrobat to do that.
Maybe you are looking for
-
I've got a work ipad. I have 3 or 4 different email accounts on my ipad. I have several documents in pages which email in to work easily. If I add any pictures into the document in pages ir refuses point blank to email them in to myself via any emai
-
I'm stuck at the sent messages display and I need to see my inbox
When I start my computer and click on the Thunderbird icon the screen that is displayed is the list of sent messages. I am unable to change this screen. I did touch the GO at the top of the page and from there I saw the in box and trash but could not
-
F4 Help for Classical ALV Grid ( REUSE_ALV_GRID_DISPLAY_LVC)
Hi All, We have an ABAP program that displays data using REUSE_ALV_GRID_DISPLAY_LVC. There is an editable column in the report for which we need to display F4 help. The functionality of the F4 help will completely user-defined. Please let me know how
-
[SOLVED] Not all Dvorak Keybourd Layouts work!
Hi everyone, I hope this is the right place to ask that question. I am using a Dvorak keyboard layout for about a year now. However, as I am native German and I do use Emacs a lot, I adjusted the Classic Dvorak Keyboard with some additional feature
-
Problems downloading Hotmail messages in Mail
I am having difficulty downloading my Hotmail email messages into Mail. I have just started using my MBP for this purpose and find that email messages until May this year have been downloaded, but past that it appears that there are 210 messages to