BPC: Changes to comments allowed although worstatus set to CLOSED

Hallo Community,
I have a problem concerning the use of comments in combination with the workstatus functionality.
------ Setup is as follows:
We have defined two workstatus:
OPEN = All rights given (data entry, comments, etc.); controlled by owner and manager
CLOSED = No rights given (data entry, comments, etc.); controlled by owner and manager
The workstatus is driven by three of eight dimensions of the cube:
a user defined dimension with the owner attribute
another user defined dimension
time dimension
We use a planning layout with comments enabled as Excel comments.
The users have a Data Access Profile with both rights from the comments section:
allow comment administration
allow editing comments
------ Problem is as follows:
When the workstatus is set to CLOSED the users are still able to manipulate comments and save them (data entries will be denied correctly).
I first thought the error would only come up on admin users while they (somehow) cancel the workstatus check but it Comes up on every type of user who have the Task "allow editing comments".
As I understand BPC this should not be possible with a workstate set to CLOSED.
Any help on that would be really appreciated!
Many thanks in advance,
Gernot

Hi Vadim,
I tried to reduce the Task Access Profile to the minimum:
analysis and data collection >> use layouts and save data
comments >> edit comments
Still the same problem.
There is one aspect I am not sure about: We only use the attribute OWNER and all elements are owned by only one user group. Could it be that the owner is always allowed to edit the comment because in our case owner = manager? And the workstatus says "controlled by manager and owner"?
I am not sure how the system reacts on that!
Cheers,
Gernot

Similar Messages

  • Although I set the on/off switch to ON with "change with buttons," the alerts will not change individually.  Any suggestions?

    I'm having issues with the alerts volume control.
    Although I set the on/off switch in settings to ON with "change with buttons", the alerts volume will not change individually.  Any suggestions?

    I don't mean to be rude or anything but did you check to see if it's on hold? I had the same problem, I nearly worked myself to tears trying to figure out why it wouldn't turn off! hope you fix you're problem.
    P.S.-Maybe you should just let the batery run out till it goes dead, hey, then it will be off right?

  • My classic video ipod won't switch back to regular video mode after using it on an elliptical. The port still allows me to charge and works on the elliptical and treadmill but it will no longer change modes to allow me to watch my shows on the ipod screen

    My classic video ipod won't switch back to regular video mode after using it on an elliptical. The port still allows me to charge and works on the elliptical and treadmill but it will no longer change modes to allow me to watch my shows on the ipod screen

    From the iPod's Main Menu choose Videos -> Settings and make sure TV Out is set to Off.
    Otherwise, try a hard reset as well.  To do this, press and hold both the Select (Center) and Menu buttons together long enough for the Apple logo to appear.
    B-rock

  • Property List error: Unexpected character b at line 1 / JSON error: JSON text did not start with array or object and option to allow fragments not set.

    Hi,
    I have a MBP 13' Late 2011 and Yosemite 10.10.2 (14C1514).
    Until yesterday, I was using Garmin ConnectIQ SDK and all was working fine.
    Yesterday, I've updated my system with latest security updates and Xcode updates too (Version 6.2 (6C131e)).
    Since, I can't launch the ConnectIQ simulator app, I have this message in console :
    8/04/2015 15:19:04,103 mds[38]: There was an error parsing the Info.plist for the bundle at URL Info.plist -- file:///Volumes/Leto/connectiq-sdk-mac-1.1.0_2/ios/ConnectIQ.bundle/
    The data couldn’t be read because it isn’t in the correct format.
    <CFBasicHash 0x7fa64f44e9a0 [0x7fff7dfc7cf0]>{type = immutable dict, count = 2,
    entries =>
      0 : <CFString 0x7fff7df92580 [0x7fff7dfc7cf0]>{contents = "NSDebugDescription"} = <CFString 0x7fa64f44f0a0 [0x7fff7dfc7cf0]>{contents = "Unexpected character b at line 1"}
      1 : <CFString 0x7fff7df9f5e0 [0x7fff7dfc7cf0]>{contents = "kCFPropertyListOldStyleParsingError"} = Error Domain=NSCocoaErrorDomain Code=3840 "The data couldn’t be read because it isn’t in the correct format." (Conversion of string failed.) UserInfo=0x7fa64f44eda0 {NSDebugDescription=Conversion of string failed.}
    I have looked at this file and it looks like a binary plist
    bplist00ß^P^V^A^B^C^D^E^F^G^H
    ^K^L^M^N^O^P^Q^R^S^T^U^V^W^X^Y^Z^[^\^]^^^_ !"$%&'()'+,^[\CFBundleNameWDTXcodeYDTSDKName_^P^XNSHumanReadableCopyrightZDTSDKBuild_^P^YCFBundleDevelopmentRegion_^P^OCFBundleVersi    on_^P^SBuildMachineOSBuild^DTPlatformName_^P^SCFBundlePackageType_^P^ZCFBundleShortVersionString_^P^ZCFBundleSupportedPlatforms_^P^]CFBundleInfoDictionaryVersion_^P^RCFBundleE    xecutableZDTCompiler_^P^PMinimumOSVersion_^P^RCFBundleIdentifier^UIDeviceFamily_^P^QDTPlatformVersion\DTXcodeBuild_^P^QCFBundleSignature_^P^ODTPlatformBuildYConnectIQT0611[iph    oneos8.1o^P-^@C^@o^@p^@y^@r^@i^@g^@h^@t^@ ^@©^@ ^@2^@0^@1^@5^@ ^@G^@a^@r^@m^@i^@n^@.^@ ^@A^@l^@l^@ ^@r^@i^@g^@h^@t^@s^@ ^@r^@e^@s^@e^@r^@v^@e^@d^@.V12B411RenQ1V14C109Xiphoneos    TBNDLS1.0¡#XiPhoneOSS6.0YConnectIQ_^P"com.apple.compilers.llvm.clang.1_0S8.1_^P^Tcom.garmin.ConnectIQ¡*^P^AW6A2008aT????^@^H^@7^@D^@L^@V^@q^@|^@<98>^@ª^@À^@Ï^@å^A^B^A^_^A?^AT^    A_^Ar^A<87>^A<96>^Aª^A·^AË^AÝ^Aç^Aì^Aø^BU^B\^B_^Ba^Bh^Bq^Bv^Bz^B|^B<85>^B<89>^B<93>^B¸^B¼^BÓ^BÕ^B×^Bß^@^@^@^@^@^@^B^A^@^@^@^@^@^@^@-^@^@^@^@^@^@^@^@^@^@^@^@^@^@^Bä
    I guess it is a normal format but my system seems to be unable to read binary plist ?
    I tried some stuff with plutil
    plutil -lint Info.plist
    Info.plist: Unexpected character b at line 1
    Same for convert
    plutil -convert xml1 Info.plist
    Info.plist: Property List error: Unexpected character b at line 1 / JSON error: JSON text did not start with array or object and option to allow fragments not set.
    I also try to download a fresh version of the connectIQ SDK and no changes.
    Any idea ?
    Thanks

    Step by step, how did you arrive at seeing this agreement?

  • The operation is not allowed for result set type FORWARD_ONLY

    Hi,
    I am trying to use scroll insensitive resultset in following manner-
    Statement stmt = con.createStatement(ResultSet.TYPE_SCROLL_SENSITIVE, ResultSet.CONCUR_READ_ONLY);
    ResultSet rs = stmt.executeQuery("some sql here");
    rs.last();
    but the rs.last() throws this exception-
    com.sap.dbtech.jdbc.exceptions.SQLExceptionSapDB: The operation is not allowed for result set type FORWARD_ONLY.
         at com.sap.dbtech.jdbc.ResultSetSapDB.assertNotForwardOnly(ResultSetSapDB.java:2725)
         at com.sap.dbtech.jdbc.ResultSetSapDB.last(ResultSetSapDB.java:557)
    Database version: Kernel    7.5.0    Build 019-121-082-363
    Driver Version: MaxDB JDBC Driver, MySQL MaxDB, 7.6.0    Build 030-000-005-567
    This used to work with 7.5 version driver. Why this is failing with 7.6 driver, any clues?
    Thanks,
    Vinod

    Hi Vinod,
    due to performance improvement when using forward only cursor we changed the default for the resultset type from TYPE_SCROLL_SENSITIVE to TYPE_FORWARD_ONLY starting with JDBC driver version 7.6. So I guess the exception comes from a statement where you didn't set the resultset type while creating it. Please check if all of the statements that you want to be scrollable have set the correct resultset type.
    Regards,
    Marco

  • How do you have Google searches appear in new tab? This was previously not a problem, but it changed and I cannot return the setting. Any ideas?

    How do you have Google searches appear in new tab? This was previously not a problem, but it changed and I cannot return the setting. Any ideas?

    I recently purchased a second hand new macbook air, although it was second hand to me the previous owner had never actually turned it on.
    Something doesn't make sense here, though I'm not saying the previous owner is lying....
    Time to send your serial # to iTS and let them see what's happening here.
    iTunes Store Support
    http://www.apple.com/emea/support/itunes/contact.html

  • I want to change the type of a Result Set

    Hello all,
    I was using a ResultSet object to store the results of a query, and when i attempted to use the ResultSet function "last()", i had a SQL exception saying that I cannot use this function on a ResultSet of type TYPE_FORWARD_ONLY. How can I change the type of a ResultSet to be for example TYPE_SCROLL_SENSITIVE, so that i can use the 'last()' function? I can only find a function caleed getType() but i want a function to allow me to set the type of the ResultSet.....
    Thanks a lot

    The type is determined when you create the Statement or PreparedStatement object. See the documention for Connection.createStatement or Connection.prepareStatement.

  • Allow only one set of parameter values for all worksheets

    I would like to " Allow only one set of parameter values for all worksheets ", but prompt before executing the worksheet. This function is a great time saver, but the users on occasion would like to change at the least one of the parameters. Is this possible? What setting do I use? I've tried various combinations of the " After opening a workbook: " on the options page. " Run query automatically", " Don't run query (leave sheet empty) ", and " Ask for comformation ". I would have thought that "Ask for comformation " was the trick, but no. I'm considering putting a do nothing parameter that has the setting of " Allow different parameter values for each worksheet. " so that it will keep all the others, default this one, but prompt for a possible change.
    Any thoughts...
    Thanks,
    Jamie

    Hi Jamie
    Even though you have the same parameter for all worksheets a user can still choose what to use on a worksheet. Its just that if they click to another worksheet then that parameter will be applied.
    Which version of Discoverer are you using?
    Best wishes
    Michael

  • Cookie permissions change back to allow every time Firefox is started

    OK, here's the deal. Recently I noticed that cookies were being allowed despite having them disallowed. After messing around I discovered that despite having cookies unchecked, every time I launch FF, the cookies automatically become enabled (both accept cookies & cookies from 3rd party sites is checked). I removed Cookie Monster & the same thing happened. I already deleted the prefs.js file and this did no good. At the time, I have Toggle Cookies installed, which I have to click every time FF launches. When launched, It starts out as denied, and then it changes to allowed. Once I click the icon & set it to deny, then the check marks in the boxes go away. So, why are cookie settings automatically being set to allow each time I launch FF?
    I wonder if DoNotTrack had something to do with this? I have removed it from FF. I also have Ghostery, but up until a week ago, Ghostery & Cookie Monster played well together.
    Anyone have any ideas? Has the browser been infected with something? Also noted today, launching FF in safe mode shows that the settings for the cookies do not change back to allowed. Apparently something running in regular mode is causing the problem. Other plug ins present on the browser are: NoScript, Foxy Proxy, AdBlock plus, Quick Java, & Norton toolbar.

    Do not use "Clear Recent History" to clear the "Cookies" and the "Site Preferences"
    *Tools > Options > Privacy: History: [X] Clear history when Firefox closes > Settings
    *https://support.mozilla.org/kb/Clear+Recent+History
    Clearing "Site Preferences" clears all exceptions for cookies, images, pop-up windows, software installation, and passwords.
    *http://kb.mozillazine.org/Cookies

  • [svn] 2862: Change a comment on SkinnableComponent.as

    Revision: 2862
    Author: [email protected]
    Date: 2008-08-15 18:18:35 -0700 (Fri, 15 Aug 2008)
    Log Message:
    Change a comment on SkinnableComponent.as
    Fixed an issue on UIComponent where initially setting the state of a component would slow down runtime performance by quite a lot (proportional to how many total components are on the screen). This affected Halo as well, but it affects Gumbo a lot because the default state of a component usually needs to be set. For the case of 2000 Gumbo buttons, this speeds up creation time by about 50%.
    QE: Yes
    Doc: No
    Bugs: -
    Reviewer: Glenn and Corey
    Modified Paths:
    flex/sdk/trunk/frameworks/projects/flex4/src/flex/core/SkinnableComponent.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/core/UIComponent.as

    Thank You for reporting this issue.
    As part of the rollup update, I see the KB2845626 which is related to a password change issue with cached credential: http://support.microsoft.com/kb/2845626
    By uninstalling the KB, you need to be aware about the potential password change issue with the cached credentials that was reported.
    Usually, it is recommended to do testing of new updates to identify potential issues and decide if you need to go with them in the production environment or not.
    What is good is that you highlighted the problem with the identified KB. I hope that this will be escalated soon to MS developers.
    This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.
    Get Active Directory User Last Logon
    Create an Active Directory test domain similar to the production one
    Management of test accounts in an Active Directory production domain - Part I
    Management of test accounts in an Active Directory production domain - Part II
    Management of test accounts in an Active Directory production domain - Part III
    Reset Active Directory user password

  • How to change a phone number that was set-up when ipad was being set-up. It was my wife's and not mine. want my number as the main number.

    How to change a phone number that was set-up when you first set Ipad up. Took wife's number instead of mine. Her number is on i-cloud and messaging, face time.

    Goto -settings-iCloud-delete account u will then have to set up a new iCloud account.if u do this it will delete anything u may have backed up in  iCloud on your old account.

  • Photos will not allow me to set the key picture for the album or event

    Photos will not allow me to set the key picture for the album or event - it is set to grey !
    Anyone else had this and found why ?
    new PHOTO app replacing iPhoto bugs/ Problems OTHER PROBLEMS :
    - no longer has a five star rating system
    - my keywords for selecting albums are gone.
    - cannot copy location of one photo to another
    - cannot have an album with  keywords AND rating > a value
    - cannot set key photo of album/event
    - multi parameter search feature gone
    Anyone got any ideas how to get around this terrible downgrade of the software ?
    BTW I have just discovered that iPhoto and its' libraries are still there, so I can go back but be left behind and frozen in time on this version if I do.
    Photos now take up 700Gb whereas it was 350Gb  #@!$#@!@#!@#
    Thanks

    That are all good points - but Photos is a completely new application. and it is only version 1.
    Continue to use iPhoto, girraween; the next update to Photos will probably add a few more features.
    iPhoto 9.6.1 is working very well with MacOS X 10.10.3.
    The migration let iPhoto installed and also your iPhoto Library will still work with iPhoto.
    If you did not uninstall iPhoto, it will still be there in your Applications folder.  And if you had updated to the latest version iPhoto 9.6.1 before you upgraded to MacOS X 10.10.3,  you can simply drag iPhoto back to the Dock from your Applications folder and continue to use it. Double click iPhoto and confirm, that you want to open iPhoto and not Photos.   It is not compulsory to use Photos, while it it still the first release. When you launch iPhoto, you will see a warning, that the iPhoto Library has been migrated to Photos, but simply click the "Open iPhoto" button.The library will still work with iPhoto. ()see: If Photos won't open a library that you already migrated - Apple Support
    If your iPhoto version is not iPhoto 9.6.1, you need to update it.
    See this User Tip:
    Usually it will work to reinstall instead of updating:
    Get iPhoto 9.6.1 if you didn't update before OS... | Apple Support Communities
    The main idea is to move the iPhoto app to the Trash, so Spotlight does not see it as installed, reload the AppStore, and then to try to download again from the App Store - from your Purchases tab, not from the main page, since you can neither buy iPhoto nor update it, but you can reinstall, if your AppleID is associated with it.
    Meanwhile you may want to send a feature request to Apple using the feedback form. Apple - Photos - Feedback
    I hope, Apple will listen and add more features to Photos to make it usable for large Photo Libraries.

  • Transfer changes from Document to the Document Set [Sharepoint bug?]

    I I have Document Set, 1 Document inside and, for example,
    1 general field.
    Task: when I change Document I need to copy value of the general field to the Document Set.
    Problem: I made Workflow on Document that calls when I change it, this Workflow copies data to the Document Set.
    But it doesn't work, because when I change Document inside Document Set there are 2 events: "Document was changed" and "Document Set was changed". And the event "Document Set was changed" called first and it copies all general
    fields to all documents inside. That's why when my Workflow starts, field in Document has value from Document Set not the one that user typed.
    Any solutions to solve the task or problem (e.g. to increase the priority for Workflow on documents inside)?

    Hi ,
    According to your description, my understanding is that you want to copy the value of a field for a document inside a document set to the associated column for document set.
    How did you design your workflow?
    I did a test based on your description, and I used the ID (in my testing, the ID of the document set is 2)to find the associated document set, and the testAA is the column.
    My workflow is:
    In my testing, everything was ok. Please have a try as the above workflow, compare the result.
    Best Regards,
    Wendy
    Wendy Li
    TechNet Community Support

  • I have a new macbook pro and an LG w2361v monitor.  The max resolution the mac is allowing me to set is 1400x1050, why can't I get to the max resolution the monitor can accept (1900x1080)

    I have a new macbook pro and an LG w2361v monitor.  The max resolution the mac is allowing me to set is 1400x1050, why can't I get to the max resolution the monitor can accept (1900x1080)?  I know that the monitor is able to accept this resolution but It can't seem to find it.  Is it something to do with the new thunderbolt port? or the fact that I'm utilizing the VGA adaptor?  I could go HDMI if that works better.

    Use DVI or HDMI.
    VGA runs out of steam after a while.

  • Note Board web part to display comments for explicit Document Set

    I guess my question falls under 'Other customization' hence my post here.
    Scenario:
    I have a Document Set content type enabled for a library. At the moment I have a few "folders" [document sets] that contain their respective documents.
    I edited a Document Set welcome page to include a Note Board web part. I edited the Note Board web part by adding a 'URL for note' to be a URL of a random Document Set welcome page while in edit mode.
    (Basically, I went to a 'ABC' document set page, clicked edit page, copied URL from address bar, closed that page, went to 'Customize Welcome Page' for all document sets in that library, edited Note Board web part by pasting the link into its 'URL for note'
    field) 
    Problem:
    Currently, all comments are shared between all document sets (folders). When I go to 'ABC' document set and post a comment, I can see my ABC specific comments in e.g. 'XYZ' document set.
    I want to have comments specific to each document set displayed on a respective page for that document set.
    Solution?
    I realize that I must have gotten an URL for a Note Board web part wrong and it does not filter comments explicit to each document set but fetches the comments from whole the library. My url is currently:
    https://intranet.domain/sitecollection/library/Forms/Machine%20Process%20Pack/docsethomepage.aspx?ID=2&FolderCTID=0x0120D520009EDF2E3A3112B041AC6EC1D4133D77550000C297D6CB32E349A435E04924DC6C58&List=7b052f9c-7e35-4251-b66d-3bcdd2950014&RootFolder=%2Fuk%5Fqhse%2FProcess%20Packs%2FSigma%202345&RecSrc=%2Fuk%5Fqhse%2FProcess%20Packs%2FSigma%202345&PageView=Shared&InitialTabId=Ribbon.WebPartPage&Visi
    I know I have to strip this URL from some parameters, presumably leaving just ID, FolderCTID, List and RootFolder.
    Could someone actually tell me exactly how my URL should look like if I want to display comments only for a given document set on its welcome page?
    Thanks!

    Hi,
    According to your post, my understanding is that you wanted to display comments only for a given document set on its welcome page, not display for all the document sets.
    If so, you should not set the “URL for note” field in the Note Board web part, you can just leave it blank, then when you post a comment in one document set, the others would not display the comment.
    Thanks & Regards,
    Jason
    Jason Guo
    TechNet Community Support

Maybe you are looking for

  • Pixelated images on iPhone Apps?

    My iPhone pictures on apps like Facebook, Instagram, etc.. are appearing pixelated/low quality or in blocks?? I've never had this happen before and it's really annoying me. My network is usually on E or 3G and I barely use wi-fi? Is it my connection

  • Satellite C660 - Touchpad highlighting everything it goes over

    I have a problem with my Satellite C660 with the Synaptics touchpad V7.2 sensitivity. The cursor keeps highlighting everything it goes over and dragging the files or programmes or opening them. It's driving me mad and restoring it to a previous date

  • Voice rather than Music recording

    Back again for a new lesson on Mac stuff. I would like to record a Pastoral Sermon and put it on a CD for use by shut-ins and house bound members. The only method available at the moment is from a fixed audio output on the Master Amplifier. Is it pos

  • Problem opening xcelcius 4.5 file

    Hello, I wrote an xcelcius file in version 4.5 and then I tried opening it in a different computer which also had 4.5 and I got the following error:  "Invalid Version found PK.  Crystal Expects version 1.1.0.2" How do I make it work? Thanks, Isaac

  • Hi there, I forget my security questions. and we dont have  in my country apple contact number . any one can helpe ?

    Hi there, I forget my security questions. and we dont have  in my country apple contact number . any one can helpe ?