BPC unable to merge cells and fill the required colour in EVDRE report
Hi BPC folks,
We are developing an EVDRE report.In that we are trying to merge some cells and fill the required colour.
after saving the BPC excel we are clicking on "expand all" button.It is going back to it's original format.ie without merging and keeping it's original colour.
Please help us out on this issue.Answers will be appreciated.
Thanks and Regards,
Sudhakar.
Hi,
Once you expand your template, the manual formatting done on the template will be gone. You need to use formatrange in your EVDRE.
Hope this helps.
Similar Messages
-
Merging cells and using the fill handle to copy the merge in subsequent...
My problem can be best illustrated by me by explaining how I could achieve it in Excel.
In Excel, this is how it would be done for example:
I select two horizontal cells and click on the merge button to merge them. They are now one cell, with the fill handle (small circle) on the bottom right corner. Clicking on that circle and dragging it down will merge both cells in each row into a single cell. i.e. each subsequent row will look like the row above until I stop dragging.
How can I do this in Numbers. Obviously I don't want both columns to become one wider column, but just a certain selection of rows within the two columns.doktor_florian wrote:
Either this answer does not have anything to do with the original question or I just don't get the link.
If I select 20 rows with two columns and press "merge" I get one cell with the content of 20 rows. This is utterly useless.
Hi,
1.) I think you do not entirely understand my poing. Unfortunately, I cannot upload images of what I am trying to illustrate in words.
I am not trying to merge 2 columns and their 20 rows into one cell. What I want to do is to merge two cells horizontally.
Open Numbers and open a blank spread sheet. You have numerous columns and rows, but for simplicity, concentrate on columns A and B and rows 1-5.
The illustrations below show what it is I want to achieve. You start of with (1), two columns with 5 rows making a total of 10 cells. For what ever reasons, I need to merge the 2nd row (A2+B2) into a single cell. I select them, click on merge and that's it. [Illustration (2)] However, I also need the 2nd and 3rd row merged. In Excel. I would click on the bottom-right corner of the 2nd row which was recently merged and drag down. This would copy the merged cell onto the rows below and the result is shown in illustration (3). Now, I could just repeat the procedure that I did the first time I merged the two cells in row 2, but imagine if you need to do this for 10 or 20 rows. That's extremely time consuming and certainly there must be an easier way.
(1) (2) (3)
A B A B A B
1 l___l___l 1 l___l___l 1 l___l___l
2 l___l___l 2 l_______l 2 l_______l
3 l___l___l 3 l___l___l 3 l_______l
4 l___l___l 4 l___l___l 4 l_______l
5 l___l___l 5 l___l___l 5 l___l___l
2.) +"If I select 20 rows with two columns and press "merge" I get one cell with the content of 20 rows. This is utterly useless."+
I think this is a very patronizing comment. How can you know what needs I or other Numbers users have? Perhaps it is very useless to you, in which case you should have said so, but it is not objectively useless.
P.S. I apology for the messiness of the illustrations. It's the best I can do. -
I need to convert PDF to Excel, however, columns and tabs make many merged cells and many blank columns. In addition to not separate the columns correctly, I see many not separate lines together in the same cell. I'm even thinking that Adobe Acrobat Pro DC has limitations. There is no way to define what points in columns to force break column? Nor create many columns that are useless? How does text to column in Excel, fixed size when we import text, and define where the breaks have columns?
Google Tradutor para empresas:Google Toolkit de tradução para appsTradutor de sitesGlobal Market Finder
Desativar tradução instantâneaSobre o Google TradutorCelularComunidadePrivacidade e TermosAjudaEnviar feedbackPDF does not contain columns, rows, formats, styles, or other aspects of word processing or spreadsheet file formats.
This is because PDF is decidedly not a word processing or spreadsheet file format or something "like" one of those.
(see ISO 32000 for what PDF "is")
What can optimize the export of PDF page content is to start with a well-formed tagged PDF (ISO 14289-1, PDF/UA-1 compliant).
Without that export is what it is and one performs whatever content cleanup is needed using the native application for the export file (MS Word or Excel).
Be well... -
Acrobat 9 - we are unable to merge word and excel files into a pdf.
Acrobat 9 - we are unable to merge word and excel files into
a pdf. Any advice?To be expected if you are working in a contemporary OS and contemporary MS Office suite.
The Acrobat 9.x product family passed into End of Support mid-year of 2013.
The product isn't compatible with contemporary OSs or Office suite.
You may have to step up into the Acrobat XI product family.
Be well... -
Document indesign in xml – stroke and fill the information content in a tag
I want stroke and fill the information contented in a tag. Inside this tag, could be several paragraphs with different styles in paragraph or character.
I want stroke and fill the information contented in a tag. Inside this tag, could be several paragraphs with different styles in paragraph or character.
-
In iphoto '09, Ihave 2 or 3 copies of the same picture. Is there a way to merge them and delete the extra pictures?
For dealing with duplicates in iPhoto check out Duplicate Annihilator
-
If I buy iTunes gift card and fill the form, do I still need to fill credit card information and will I be able to access iTunes and apple store?
Look for a None option in the Payment Methods;
If you do not have one you will have to supply a bank card or redeem an iTunes Gift Card. -
Hi I Run Windows 7. Since upgrading to Firefox 4.0 I am unable to "clear history" and get the message "QuickTime failed to initialize". I can delete history when in safe mode with plug-ins disabled. Re-installing quick time fails to resolve the issue. Any ideas or suggestions?
i have that quicktime problem too
-
I have a work to do, in ssrs we are using server reports in our project. i am looking for dynamically generating the ssrs dataset and filling the data into the dataset and binding the dataset to ssrs report(RDL) dynamically.
Getting the dataset dynamically has a solution by using Report Definition Customization Extension (RDCE), but the problem is binding that dataset to the report(RDL) dynamically was not there.
Here is the reference for RDCE http://www.codeproject.com/Articles/355461/Dynamically-Pointing-to-Shared-Data-Sources-on-SQL#6
I looked for binding the dataset to the report(RDL) dynamically and searched many sites but i did not get the solution. Can anyone help me here.
Is there any custom assemblies or any Custom data processing extensions to work around. Please help.
Thanks in advanceHi Prabha2233,
Thank you for your question.
I am trying to involve someone more familiar with this topic for a further look at this issue. Sometime delay might be expected from the job transferring. Your patience is greatly appreciated.
Thank you for your understanding and support.
Regards,
Vicky Liu
Vicky Liu
TechNet Community Support -
I can't use air play mirroring with the new upgrade on my imac (mountain lion) because my mac 21.5-inch is a Mid 2010... is there any way I can full fill the requirements and be able to use it? an upgrade or something??
Welcome to Apple Support Communities
http://www.airparrot.com -
I can't use air play mirroring because my mac 21.5-inch is a Mid 2010... is there any way I can full fill the requirements and being able to use it? an upgrade or something??
No. There is a 3rd party software, Airparrot.
-
I am trying to download a free trial of photoshop for my macbook pro and it says there is an error and that the requirements for the new version is not supported for the mac I have. I have looked at the list of requirements but have no idea how to tell what I do and do not have?
Apple Menu --> About this Mac.
Mylenium -
Unable to merge cells in Table(WAD)
HI Gurus,
I am working on BI7.0,
I am trying to create Web Templates to display reports in portal for that
I have selected Table (rows and coloms), When I try to merge first two cells
(to write descritpion of query) it is not allowing me to merge.
Can anybody suggest me how to merge two cells in table.
Thanks in advance.
Maruthi
Edited by: maruthi k on Dec 15, 2008 2:04 PMIf you're talking simply about merging the cells in an HTML table, then you use the COLSPAN or ROWSPAN options in HTML.
Check out the following
<html>
<body>
<table border="1" cellpadding="2" cellspacing="0">
<tr>
<td>
Heading 1</td>
<td>
Heading 2</td>
<td>
Heading 3</td>
</tr>
<tr>
<td colspan="2">
Text covering 2 cells</td>
<td>
Last cell</td>
</tr>
<tr>
<td rowspan="2">
Text covering 2 cells across 2 rows</td>
<td>
Text in cell 2 row 2</td>
<td>
Text in cell 3 row 2</td>
</tr>
<tr>
<td>
Text in cell 2 row 3</td>
<td>
Text in cell 3 row 3</td>
</tr>
</table>
</body>
</html>
Take the above code and put it in a simple HTML file and run that file in your browser, you should then be able to see how COLSPAN and ROWSPAN work.
COLSPAN=2 means that the cell spans 2 columns. Similary, COLSPAN=3 would then span 3 columns.
Remember though that when you set COLSPAN=2, you will need 1 less TD in that row, otherwise you end up with an extra cell in that row which makes your table look all messy.
Now, in your template, get into the XHTML view, find the table, and set the COLSPAN / ROWSPAN accordingly.
Hope this helps.
Cheers,
Andrew -
Need a formula to calulate multiple cells and add the sum total to a cell in a other table
Im a chef and my monthly inventory is a time consuming task. I get invoices from multiple suppliers on each day of the week. I enter them into a spread sheet and then need to add the sum total for all the invoices for say MONDAY. That total needs to be entered into a cell in another table called "daily spend". Is there a formula to automatically add say all the invoices from monday and input the daily spend cell on that table. Here is an example
I created a column B-to give each day a number(sometimes multiple invoices come from the same supplier for each day)<GREEN>..If there was a way to do this differently...Im happy to change the layout of the spreadsheet. I want to add the total $ (column F) for each day together(all the blue fields) and then insert the total into another cell seen in the next table . So in this example its F4+F16+F17=?, ? inserted into N2 of the next table
Thanks so much"I ve finally has a play with the advice you gave me but I have realized that the formula you gave me is for a week....and like I mentioned in my reply to you, one table is weekly the other is monthly....is there a way to overcome this? (my answer to you explains it)"
Hi Gavin,
Unfortunately, the scale of your illustrations in that reply made them difficult (or impossible) to read, even on the Retina screen.
The first formula, used to fill column B, extracts the Weekday number for each date. Since these numbers should be equivalent to the day of the month, You'll need to replace this with a formula that returns the Day value of each date:
Old:
B2: =WEEKDAY(A,2)
New:
B2: =DAY(A)
Fill down to end of column.
Because of the arrangeent of your Data table, you will need to repeat this formula in column H (with references to column G), etc. for each set of dates in the table.
The SUMIF formula in column F is fine as is, except that it assumes all condition data will be in column B of Data, and all data to be summed will be in column F of Data. Since this is obviously not the case for your Data table, you will need a separate iteration of the formula for each week in the table, with the four SUMIF statements enclosed in a SUM statement:
E2: =SUM(SUMIF(Data :: $B,A2,Data :: $F),SUMIF(Data :: $H,A2,Data :: $L),SUMIF(Data :: $N,A2,Data :: $R),SUMIF(Data :: $T,A2,Data :: $X))
Fill down for as many rows as there are days in the month being summarized.
Column references in the formula assume that six columns are used for each week, and that there is no gap in the table between weeks.
Note that the formula does not distinguish between transactions on July 7 and those on June 7 or August 7. Because of this, the Data table must be limited to transactions in a single calendar month.
Regards,
Barry -
EPM Formatting Sheet Issue - Right click on the cell and lock the cell
Dear Experts,
I have come across an issue. Earlier I worked on BPC NW 10 integrated with Ms Excel 2007. I applied a feature of locking the cell linked with specific member in Input Template and Report by going to EPM Formatting Sheet, selecting dimension member (Which I want to lock in Input Sheet and Report), right clicking on the cell under Data Column and selecting the option "Lock the Cell". As I protect my Input sheet and Report, and do refresh, the cell linked with specific dimension member get locked. Hope everyone has used this feature.
Now I have Ms Excel 2013 installed in system. I am not able to find this feature. if anyone has tried this feature in BPC NW 10 with Ms Excel 2013. Please help me out. As this was good feature by BPC.
Regards,
DavidHi Andy,
I am using Excel 2013, When I checked, I did not find "Lock Option". When I was using Excel 2007, then I had this locking option. below are the details that you asked for...
When I right click on cell in EPM formatting sheet, I get options as shown below in screen shot, but there is no "Lock Option"
Regards,
David
Maybe you are looking for
-
Do i install an anti virus on my MacBook Air ??
I just want to know that whether it is necessary to install an anti virus for my Mac ?? If yes then which one is recommended ?
-
Firefox was unable to open google, and I saw there was an update for that problem, but I am unable to install the update (or any update for that matter) as well as removing Firefox. Every time I try to do so, I get a message that I must close Firefox
-
Browser does not ask to accept a certificate for an applet
I wanted to write an applet that enables the user to access the local file system. On the internet i found the following resource: [http://www.captain.at/programming/java/] which actually is great. So i followed the instructions on the page an everyt
-
We just implemented ISE 802.1x in couple of our Cisco 4507 switches and we are seeing the following error in the log. %HA_EM-3-LOG: NAC-RADIUS-FAIL-OPEN-DEAD: All RADIUS servers are dead changing the nac-enforcement ACL to permit all I paste it in
-
IDVD issues when dvd is close to being saturated
I work at filming weddings parties etc. so when i have everything edited and ready i burn the video to a dvd using idvd.But if the video lasts about 2 hours when i play the video there are parts that can last from 5 secs to 4 min that the quality of