BPE adapter : message not used by any process

hi frnds,
I've created 2 scenarios using BPM
1) merge scenario: 2 msgs ==> BPM ==> 1 msg
1st msg is going without any problem. but 2nd msg is giving error saying 'BPE ADAPTER ERROR: message not used by any process'. i checked in sxi_cache and found that return code for Intg'n process is 0 only. but still i tried reactivating. but no use
2) split scenario: 1 msg ==> BPM ==> 2 msgs
sender msg is going without any problem,but not receiving 2 rcvr msgs to the target directory. return code of IP is 0 and no other errors.
after installing PI on my system, for the first time i'm trying BPM scenarios. simple file to file working properly. BPE adapter has to be activated manually or i missed any initial configuration??? pls help me to resolve this.
thanks.

abhishek,
I have used the following steps in BPM for this scenario xml file ==> BPM ==>xml file
1) data types: a)send_dt
                        b) rcv_dt
2) msg types  a) send_mt
                        b)rcv_mt
3) interfaces   : send_ob_im
                          send_abs_im
                          rcv_abs_im
                          rcv_ib_im
in integration process,
start ==> receive ==> send ==> stop
so in general its like,
send CC ==> send OB I/F ==> send ABS I/F ==> rcv ABS I/F ==> rcv IB I/F ==> rcv CC
when i'm not using BPM, outbound queue SMQ1 is empty and messages are not stickking up there. but if i use BPM, SMQ1 is having entry saying 'SYSFAIL'. for the first time i'm doing  the BPM scenarios.
thanks.

Similar Messages

  • Error: BPE_ADAPTER Message not used in any process

    Please help me fix this error.
    My scenario is i have a bpm process for merging three files.
    and i configured in this way..
    merge the three files into one and send into SAP
    i have three communication channels (file adapter) for three files
    one communication channel xi adapter for a proxy into sap.
    using these files as input to BPM process
    then using BPM process as sender to the proxy reciever
    I am getting error from sxmb_moni in xi box
    as error category:BPE_ADAPTER
    error id: message_not_used.
    it says message not used in any process.
    please help me correct this problem..
    thanks
    jp

    JP,
    Are u sure there is nothing wrong in your design part? Also Are u using Fork to receive 3 files parallely, If yes then all the 3 files has been checked for start process? Can u confirm this.
    Also in the Inerface determinations did u gave abstract interfaces that BPM is recieving?
    Best regards,
    raj.

  • BPE_ADAPTER MESSAGE_NOT_USED Message is not used by any processes

    We need some help on BPM flow. We are at it for last 3 days without much progress. We are able to make sync call to same BAPIs and get data without any issue. However, with BPM we have this issue
    I am creating the simplest integration scenario as
    1.       HTML/HTTP-->BPM (Async)
    2.       BPM-->R/3 (Sync)
    3.       BPM-->File (Async)
    Created all required interfaces and mapping. I have some dummy mapping for first 2 cases. I am able to activate the integration scenario and Integration Process without any error. I am able to import it in integration directory successfully without any error. When I am executing the first async request from HTML client I am invariably end up with an error from sxmb_moni as
    <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--
    Call Adapter
      -->
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
      <SAP:Category>XIAdapter</SAP:Category>
      <SAP:Code area="BPE_ADAPTER">MESSAGE_NOT_USED</SAP:Code>
      <SAP:P1 />
      <SAP:P2 />
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText />
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>Message is not used by any processes</SAP:Stack>
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error>
    The BPM is not getting invoked. Looking at the trace it shows that there is an error after creating BPE proxy for message as
    <Trace level="3" type="T">created BPE proxy for message DE5FB5802F33D3F19373005056A12466</Trace>
      </Trace>
      </Trace>
    - <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">
      <Trace level="3" type="T">Persisting message after plsrv call</Trace>
      <Trace level="3" type="T">Message-Version = 007</Trace>
      <Trace level="3" type="T">Message version 007</Trace>
      <Trace level="3" type="T">Pipeline CENTRAL</Trace>
      </Trace>
      <Trace level="3" type="System_Error">Error exception return from pipeline processing!</Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
    What I have checked so far:
    1.    I have checked that the developer key is assigned to my user id
    2.    Used SWF_XI_CUSTOMIZING to make sure that all the process are green
    3.    Used sxi_cache to make sure that the BPM process has return code 0 and also reactivated it numerous times. Also checked activation log and no error there
    4.    Used SXMP_ADM_BPEAutomatic BPM Customizing to check all the entries are green
    5. There are not any message in sxmb_moni_bpe for my interface shows no message
    Input call has:
    1.    Sender Service: MFG_BPM_BusinessSystem
    2.    Sender Interface: MI_Outbound_Async
    3.    Quality Of Service: EO
    4.    Sender Name space: Name space
    5.    Input XML:
    <?xml version="1.0" encoding="UTF-8"?>
    <ns0:BAPI_SALESORDER_GETLIST xmlns:ns0="urn:sap-com:document:sap:rfc:functions">
       <CUSTOMER_NUMBER>0000001000</CUSTOMER_NUMBER>
       <DOCUMENT_DATE/>
       <DOCUMENT_DATE_TO/>
       <MATERIAL/>
       <MATERIAL_EVG>
          <MATERIAL_EXT/>
          <MATERIAL_VERS/>
          <MATERIAL_GUID/>
       </MATERIAL_EVG>
       <PURCHASE_ORDER/>
       <PURCHASE_ORDER_NUMBER/>
       <SALES_ORGANIZATION>1000</SALES_ORGANIZATION>
       <TRANSACTION_GROUP/>
       <SALES_ORDERS>
          <item>
          </item>
       </SALES_ORDERS>
    </ns0:BAPI_SALESORDER_GETLIST>
    Any clue, help pointer will be of great help. Just beats me, what is wrong!!
    Version:
    SAP R/3 ECC 6.0
    XI 7.0

    Hi,
    Please check these threads where they have the same issue:
    Message is not used by any processes
    Error: Message is not used by any processes
    Error: BPE_ADAPTER Message not used in any process
    Message is not used by any processes
    ---Satish

  • Message is not used by any processes

    Hi,
    I've made a BPM and in sxmb_moni I get this:
    <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
      <SAP:Category>XIAdapter</SAP:Category>
      <SAP:Code area="BPE_ADAPTER">MESSAGE_NOT_USED</SAP:Code>
      <SAP:P1 />
      <SAP:P2 />
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText />
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>Message is not used by any processes</SAP:Stack>
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error>
    I check my return code in sxi_cache and it's not 0 after activating.
    How could I resolve this error?
    Thanks in advance,
    Samantha.

    Hi,
    I don't understand "Is the BPM instance being created in the first place?". I've created the BPM for the first time, I don't know if you refer to this.
    When I click on PE, I get: "the action is not valid for the selected message", so I can do nothing.
    I think my user has developper key, although I'm going to make sure of it.
    Thanks,
    Samantha.
    Message was edited by:
            Samantha Núñez

  • Error: Message interface is not used by this process Netweaver PI 7.0

    Hi All,
    I am receiving this error in file to idoc scenario. The file is being picked up by communication channel. Then through an interface mapping IM_MET_ROUTE is being forwarded to a BPM MET_FILE_ROUTE. The MET_FILE_ROUTE forwards it to different BPM depending on file type. whenever I am posting a file it is not reaching IM_MET_ROUTE and giving an error  as shown below.
    <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--
    Call Adapter
      -->
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
      <SAP:Category>XIAdapter</SAP:Category>
      <SAP:Code area="BPE_ADAPTER">MESSAGE_NOT_USED</SAP:Code>
      <SAP:P1 />
      <SAP:P2 />
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText />
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>Message interface is not used by this process</SAP:Stack>
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error>
    Can you please suggest any solution to remove the error.

    Hi All,
    Thanks a lot Vikrant for your suggestion. The error is resolved. This was not a configuration problem. This was a design problem. Initially I also looked for configuration changes but that was correct hence I came to conclusion that this might be a design isuue.
       These are the steps that we should follow to resolve the errors
    1. First Check your configuration again and again with test tool and payload to find where exactly your configuration is failing.
    2. The above step will not be successful since we are already receiving the error.
    3. The above test will fail in interface determination step.
    4. Please go through the interface determination in Integration repository(PI 7.0).
    5. Check whether all interface mapping,source and target message interface are proper or not.
    6. if receiver or sender of message is an BPM please look into their receiver and sender element message type.This must match with the one specified in Interface mapping defined within Integration directory( in the interface deterination step).
       In my case the sixth step above was the solution.

  • BPM : Message interface is not used by this process

    Hi,
    In BPM : to pass the message facing error as below.
    Messages not reflecting in BPM monitor.
    I have configured Recveiver - transformation - sender in BPM.
    In recvier in BPM is configured with Abstract Type as same in the message mapping.
    Is there any thing i am missing?
    <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Call Adapter
      -->
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
      <SAP:Category>XIAdapter</SAP:Category>
      <SAP:Code area="BPE_ADAPTER">MESSAGE_NOT_USED</SAP:Code>
      <SAP:P1 />
      <SAP:P2 />
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText />
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>Message interface is not used by this process</SAP:Stack>
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error>
    I have refered links but not able to get the clue for this error as its from the Call adapter.
    error: Message interface is not used by this process Netweaver PI 7.0
    BPE_ADAPTER: MESSAGE_NOT_USED
    Regards,

    Hi,
    I just saw your IP design and from this I can see that you have message mapping between Sender(as in Outbound interface MIOASY) and abstract interface (as in MIAASY) and then in that you have used transformation step to utilise Interface mapping which is between same abstract interface which is not required at all as message type for both the interfaces is same. For me, what your configuration would be is
    1. Sender agreement to fetch the message from outbound interface(MIOASY) utilising communication channel with whatever adapter you have used
    2. Receiver Determination with Sender and sender interface as MIOASY while receiver as IP(Integration process)
    3. Interface determination between
        a. Sender and Outbound interface and Abstract interface with interface mapping IM_Sender
        b. IP as sender with abstract interface MIAASY and receiver interface MIIASY with no interface mapping being used as it must be of same type as receiver interface is
    4. Receiver agreement with MIIASY being used as receiver interface and communication channel utlililsed to convert it into receiver format.
    If I am assuming it correct then if you see then inside BPM we are not using receiver interface MIIASY which is why I feel this error is coming.
    However, if you design it something like this then I feel the error would get resolved
    Design
    1. Make one abstract interface (MIAASY_Sen) of same type as sender, and create another abstract interface (MIAASY_Rec) of same type as your receiver message type
    2. Create message mapping between sender message type and receiver message type, Interface mapping IM_ABS - (MM_ABS_ABS) between sender abstract interface (MIAASY_Sen)  and receiver abstract interface (MIAASY_Rec)
    3. BPM should be something like this
       Container:*
    rec Abstract Interface MIAASY_Sen
    send Abstract Interface MIAASY_Rec
    Receiver (rec) - Transformation (IM_ABS) -  sender (send)
    Configuration
    1. Sender agreement to fetch the message from outbound interface(MIOASY) utilising communication channel with whatever adapter you have used
    2. Receiver Determination with Sender and sender interface as MIOASY while receiver as IP(Integration process)
    3. Interface determination between
        a. Sender,Outbound interface MIOASY and Abstract interface MIAASY_Sen with no interface mapping
       b. IP as sender with abstract interface MIAASY_Rec and receiver interface MIIASY with no interface mapping being used as it is of same type as receiver interface is
    4. Receiver agreement with MIIASY being used as receiver interface and communication channel utlililsed to convert it into receiver format.
    Let me know if it works.
    Regards,
    Amit

  • I am having troubles, when I open LR I get a message that there is an error and it will try to fix the error next time it opens, but I get the error next time it opens, and this is going on and on where I can not use LR, any suggestions?

    I am having troubles, when I open LR I get a message that there is an error and it will try to fix the error next time it opens. LR closes on it's own, I reopen it and get that same message next time it opens, and this is going on and on where I can not use LR, any suggestions? If I click on a different set of photos in the libary before I get that message I might or might not get the message next time it oipens, but I still can not get to those photos, and it is not just one or two but most of my photos. HELP!!!!
    Thanks
    Carol

    The first thing I would suggest is for you to go to the folder containing your catalog, using your system browser. There will be a folder that has the extension .lrdata. Delete that folder, and then try to start Lightroom. If that doesn't work, replace your catalog with your most recent backup.

  • Message interface is not used by this process

    Hi,
    I´ve  created a process to get a txt file in the O.S., verify this file and create another file. This verify I´m using BPM but there is an error message:
    "SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30"           xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
      <SAP:Category>XIAdapter</SAP:Category>
      <SAP:Code area="BPE_ADAPTER">MESSAGE_NOT_USED</SAP:Code>
      <SAP:P1 />
      <SAP:P2 />
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText />
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>Message interface is not used by this process</SAP:Stack>
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error>"
    Could you help me,
    thanks,
    Renato

    Hi Renato,
    Can you please elaborate what you did you do to eliminate the problem. I am facing the same one now.
    A file is received followed by FCC and then a interface mapping is to be called. somehow the system is unable to find the necessary mapping and giving this error.

  • Adobe FLME Error Message "Please check if video devices are connected properly and are not used by any other application."

    Hello, I'm trying to use my MAC Book Pro with Adobe FMLE. Once I select either my internal or external camera and microphone, in the live encoder I get this error message. "Please check if video devices are connected properly and are not used by any other application." The Facetime HD camera works in Photo Booth. Can someone assist me in what to do please, Thanks in advance!

    Hi all ,
    We found the solution for this issue .
    We have installed the crypto library in global executable directory and any way it will replicate those binaries to individual application servers.
    But the parameters are still looking for global executable directory for loading crypto library during time.
    So all application servers are trying to load crypto library files from global "exe" instead of local directory, which was clustered .Sometimes during  heavy network load it may cause some delays to load the libraries to individual application servers and in turn is causing the license key issues.
    Note 982056 - The license key library has not been initialized yet..
    SAP Recommend option for all SSF parameters should be instance profile parameters not in default parameters..This was mentioned in below note:
    Note 662340 - SSF Encryption Using the SAPCryptolib --- .
    But in our Environment SSF and SEC parameter were set in DEFAULT profile instead Instance profile.
    Recommendations:
    o     ssf/ssfapi_lib  = <Path and file name of SAPCRYPTOLIB>
    o     sec/libsapsecu  = <Path and file name of SAPCRYPTOLIB>
    This was mentioned in the below SAP HELP.
    http://help.sap.com/saphelp_nw04/helpdata/en/3d/bf463c6796e61ce10000000a114084/frameset.htm.

  • The payment method R in country SM is not used in any company code

    Hello.
    In transaction FBZP I choose "Payment Method/Country overview"
    I open SM (San Marino) and I choose "Use in company code" I obtain the message:
    The payment method R in country SM is not used in any company code
    What have I to do?
    Thanks.
    Mario
    Edited by: Ferruccio Galli on May 7, 2009 10:41 AM
    No news for me, please?

    Hi ,
    Go through below path for confiquration patteren
    Path: SPRO  Financial Accounting  Accounts receivable and accounts payable  Business transactions  out going payments  Automatic out going payments  Payment method/ bank  selection for payment program (Transactions code: FBZP)
    set up payments method per country for payment transactions
    Set up Payment methods for company code for payment transactions
    Set up All Company codes for payment transactions:
    Set up paying company code for payment transactions:
    Bank determination:
    Regards
    Surya

  • How to delete layers not used in any layer comp?

    I have a psd with multiple layers and multiple layer comps. Many of the layers are not used in any layer comp. I need to import this file into flash, but I don't want to import anything I don't need. So, I need to delete any layer (particularly text layers) that aren't used in any of the layer comps. I know I could go through and turn on each individual layer comp and manually delete, but the way this file is laid out, that could take years and cost millions of lives.
    Is there a more automated way to do this?

    You could export the layer comps to files and then re-import them to a fresh file.

  • Identify tables which are not used in any access seq.

    Hi
    Need to identify those tables (A500 - A999) which are NOT used in any access sequence (table T682I).
    Not sure how to do this.
    Thanks for the help

    Hi Karen,
    if you don't want to use SE11 and see it on one glance, you could use the following coding:
    DATA: it_t682i TYPE TABLE OF t682i,
          wa_t682i TYPE t682i,
          it_missing TYPE TABLE OF t682i,
          wa_count TYPE kotabnr VALUE 499.
    SELECT * FROM t682i INTO TABLE it_t682i
                  WHERE kvewe = 'A'
                  AND  kotabnr BETWEEN 500 AND 999.
    DO.
      ADD 1 TO wa_count.
      READ TABLE it_t682i INTO wa_t682i
                 WITH KEY kotabnr = wa_count.
      IF sy-subrc <> 0.
        CLEAR wa_t682i.
        MOVE wa_count TO wa_t682i-kotabnr.
        APPEND wa_t682i TO it_missing.
      ENDIF.
      IF wa_count = 999.
        EXIT.
      ENDIF.
    ENDDO.
    BREAK 'your user'.
    The table it_missing is just a quicky solution, you could use a table with just one field or use write to print the result.
    Hope that helps!
    Regards
    Nicola

  • The following mapped Topic IDs were not used in any topic:

    Hi, I just start my Help File - RH8. One topic only. If it's writing in english "NewTopic1" compiling OK.  If it's writing in Portuguese "NovoTópico1", when compile get this Note.
    "The following mapped Topic IDs were not used in any topic:"
    Nothing at the "Remoe Unused MAP IDs..." can you help? Thanks.

    Hi,
    What happens if you use a find and replace to replace all characters with umlauts in the topics before importing them? (Backup your files first though)
    Greet,
    Willam

  • My iphone 4s was stolen. How could I destroy it so that the guy can not use it any more?

    My iphone 4s was stolen. How could I destroy it so that the guy can not use it any more? system IOS 6
    or just lock the phone forever?
    Could it be possible?
    Thanks

    if you want to erase all data in the phone do this
    If the phone is connected to the Internet and contains your account you can erase the phone by
    1 Going to ( www.icloud.com) and sign in With your account (the account you use in the stolen phone)
    2 go to Find My iPhone
    3 if the phone connected to internet you will see the phone on the map
    4 choose the phone and click  (erase everything)
    i wish this help you  
      Brother

  • Message not passed to Business Process Engine

    Hi,
    I have a simple test scenario:
    File --> Integration Process --> File
    The process only has a reveive and a send step and sends the message further using the File adapter (this is just for testing purpose and no real-life scenario).
    This works correctly until the message needs to be passed to the Business Process - in message monitoring I can see that the receiver and interface determination worked successfully and that the message needs to be passed to the Integration Process and that's it. No active process, no obvious error message...
    Any hints what I could do to analyze what's happening? Where can I find more information on what the problem could be (any additional logs, monitoring, etc.)? What can go wrong when a message is passed from the Integration Engine to the BPE?
    Thanks for your help,
    regards,
    Peter

    OK Im trying to understand you....
    Your saying that it works correctly until the BPM...
    Well this is not possible as the first step would be the sending from the source Business system to the Integration Process so in essence you would have not done anything....
    Basically the flow is Comm channel to Pipeline which then sends to BPM which then sends back to the pipeline and to the target system. So in SXMB Moni no receiver would of been foun if you are saying that it doesn't get to the BPM....
    Maybe im not understanding properly....
    In fact now that I think about it... Have you specified the message in BPM... (Abstract Interface etc)
    Message was edited by:
            Alex Ong

Maybe you are looking for