BPEL worklist with Psft 9

It seems there is a tight integreation between BPEL and Psft 9.
How are the users and roles setup for the BPEL worklist??
Thanks
Rgs
JO

I have the same Problem. Please Help me.
Thanks

Similar Messages

BPEL worklist 11g as portlet

Hi,
We have to build a custom BPEL worklist with OID and SSO in SOA suite 11g and deploy it as a portlet on Oracle Portal (10.1.4). Am not able to find any help on deploying worklist application as portlet for 11g. Any pointers/documents for this will be very helpful.

I have the same Problem. Please Help me.
Thanks

Problem getting custom workflow to work with BPEL Worklist

I am currently working through the DocumentReviewWorklow custom workflow example in the Oracle Content Services 10g Custom Workflows document and cannot get the workflow to prompt approvers through the BPEL Worklist application that an action must be taken.
When I run the workflow, the process gets to the point of calling the TaskActionHandler and the approver is told that a process is pending their approval in the Content Services Console.
The following appears in the BPEL Process Manager when I Audit the workflow:
onMessage (137) - pending
[2006/03/20 08:57:42] Waiting for message from "TaskManagerService", operation is "onTaskSuspended".
onMessage (126) - pending
[2006/03/20 08:57:42] Waiting for message from "TaskManagerService", operation is "onTaskUpdated".
onMessage (118) - pending
[2006/03/20 08:57:42] Waiting for message from "TaskManagerService", operation is "onTaskErrored".
onMessage (110) - pending
[2006/03/20 08:57:42] Waiting for message from "TaskManagerService", operation is "onTaskWithdrawn".
onMessage (102) - pending
[2006/03/20 08:57:42] Waiting for message from "TaskManagerService", operation is "onTaskCompleted".
onAlarm (161) - pending
[2006/03/20 08:57:42] Alarm started. Alarm will go off at time "2006/03/22 08:57:42".
onAlarm (156) - pending
[2006/03/20 08:57:42] Alarm started. Alarm will go off at time "never".
onAlarm (151) - pending
[2006/03/20 08:57:42] Alarm started. Alarm will go off at time "never".
After a period of time, the workflow eventually times-out because it is neither approved or disapproved. I have got the other non-blocking custom workflow examples to work without any problems.

Thanks bnainani, you solved my problem!
Despite the fact that the approver's username is in the Oracle Collabortion Suite OID as all lower case letters (and you can still login to worklist with lower case letters), you were right in saying that you have to use all upper case letters when logging into the worklist application in order to see the pending tasks.
Just out of curiousity, do you have any idea why worklist requires upper case letters for the username?
Message was edited by:
middaymag
Message was edited by:
middaymag

Integrate SSO with BPEL Worklist

Hi!
I'm trying to integrate Oracle Single Sign On 10.1.4 with BPEL Worklist for Human Tasks on SOA Suite 11g. Does anybody knows any link or tutorial to this?
Thanks in advance

Hello Taylor,
Thanks for writing back.
Yes OBIEE can invoke web services!
Response back from BPEL is not intended but the issue is to pass values to BPEL from OBIEE.
Could you let us know how we achieve this with a JMS/MQ/AQ queue?
Thanks,
Abhishek

Strange behavior of textareas in BPEL Worklist (10.1.2)

I have a very strange behavior with linebreaks in all my <textarea>s in the BPEL-Worklist-jsps: (they work fine as <INPUT>s
Example:
Default-text:
line1
I update the textarea to:
line1
line2
-> hit update
line1
*** (second line is completly missing)
-> hitting update again (no change in text)
line2line1
*** (all on one line with the new line in front)
As Value I use:
<%=PayloadFormGenerator.selectNodeValue(payload, "/ns0:task/ns0:payload/ns1:abstract", form.getNamespaceMap(),"string", context.getLocale())%>
and as mentioned: It works fine for <INPUT>.
What do I do wrong? Is this a bug?
Daniel
Message was edited by:
user552073

Had the same problem, could not get it to be consistent. I would say this is a bug, but decided to edit payloads via the database in the end...

Oracle BPEL Worklist application as a remote portlet in ALUI portal

Hi,
I am integrating the Oracle BPEL sample worklist application as a remote portlet in ALUI in a community page.
I have 2 urgent queries...and desperate to look for a resolution...
1) On opening the page where the remote portlet is placed ,it is very very slow to open the firt login screen in IE6.However the page is loading fast in IE7 or netscape.Every time the login page is hit we need to refresh the page to load it quickly..
2)on thewebservice configuration section for portlet -- > http Configuration ,I have created a gateway and added our Oracle BPEL worklist context to gateway the request.There is a option like Inline refresh..
a)If inline refresh is unchecked ,the BPEL worklist is not retaining the portlet nature like minimize ,maximize and the top community navigation is lost.
b)however if inline refesh is checked..The portlet nature is retained ,however there is javascript error coming in the page which is not allowing some of the vanilla features of BPEL worklist is working properly like clicking some buttons and taking actions...
Is this some configuration to be made in the ALUI side or some thing else...Please let me know if there is any solution to this...
Regards
Ashif

Now I am able to display the initial page of the remote portlet. However, when I try to do some operations I m running into one more issue:
[WSRP-Consumer:420733]No markup received from the producer [oraclePortal_producer] for portlet with portletHandle[E:3:default].
Is there anything futher I need to do?
regards,
Ansuman

Generate new user in Oracle BPEL Worklist

Hello,
how can I put on in the Oracle BPEL Worklist a new user? I have already read the tutorials in addition. Or if one can work only with the preset users like jstein and jcooper.
Thank
Greeting Cathleen

add a new user in jazn-data.xml (..\integration\orabpel\system\appserver/j2ee/home/config) in your enviroment (if you use developer install) - or if you use OID there .. add additional properties and relations in user-properties.xml (..\integration\orabpel\system\services\config)
hth clemens

Configuring BPEL PM with Oracle XE database

Hi,
I have been using my BPEL PM with default olite db quite a days ago and it was running fine. Now I have changed the dehydration to Oracle XE database and chnaged the corresponding data-source.xml files.
I can access the default domain from BPEL console and I can see the processes.
But I am getting the error when am creating an instance of the process and also I am not able to login to the worklist application.
The error I got is shown below.
<2005-12-26 12:38:57,375> <ERROR> <default.collaxa.cube> <BaseCubeSessionBean::logError> Error while invoking bean "cu
be delivery": Cannot fetch a datasource connection.
The process domain was unable to establish a connection with the datasource with the connection URL "loc/BPELServerDat
aSource". The exception reported is: Cannot fetch a datasource connection.
The process domain was unable to establish a connection with the datasource with the connection URL "loc/BPELServerDat
aSource". The exception reported is: Listener refused the connection with the following error:
ORA-12519, TNS:no appropriate service handler found
The Connection descriptor used by the client was:
152.69.213.27:1521:xe
Please check that the machine hosting the datasource is physically connected to the network. Otherwise, check that th
e datasource connection parameters (user/password) is currently valid.
Please check that the machine hosting the datasource is physically connected to the network. Otherwise, check that th
e datasource connection parameters (user/password) is currently valid.
<2005-12-26 12:38:57,515> <ERROR> <default.collaxa.cube.engine.dispatch> <BaseScheduledWorker::process> Failed to hand
le dispatch message ... exception ORABPEL-05002
Message handle error.
An exception occurred while attempting to process the message "com.collaxa.cube.engine.dispatch.message.invoke.InvokeI
nstanceMessage"; the exception is: Cannot fetch a datasource connection.
The process domain was unable to establish a connection with the datasource with the connection URL "loc/BPELServerDataSource". The exception reported is: Cannot fetch a datasource connection.
The process domain was unable to establish a connection with the datasource with the connection URL "loc/BPELServerDataSource". The exception reported is: Listener refused the connection with the following error:
ORA-12519, TNS:no appropriate service handler found
The Connection descriptor used by the client was:
152.69.213.27:1521:xe
Please check that the machine hosting the datasource is physically connected to the network. Otherwise, check that th
e datasource connection parameters (user/password) is currently valid.
Please check that the machine hosting the datasource is physically connected to the network. Otherwise, check that th
e datasource connection parameters (user/password) is currently valid.
Waiting for any idea to solve this issue.
Thanks in advance
Aki

Similar problems, in my case I was trying out the DatabaseServer on an Oracle XE database using the Embedded OC4J A/S bundled with RC3; this combination turns out explosive :)
The service was simply doing a select statement and the number of connections kept growing and growing during my tests; you can see them from the command line when typing `netstat -t` - eventually it just stopped working while I was testing; in the web service it reported:
ORA-12519, TNS:no appropriate service handler found
But my listner was running !!! I tried the connection from JDS and it complained about the same thing - then eventually I tried it from sqlplus and it showed:
ORA-00020: maximum number of processes (%s) exceeded
So now finally we're getting somewhere - after googling I found this web site; a good laugh:
http://it.newinstance.it/2007/06/01/ora-12519-tnsno-appropriate-service-handler-found/
So basically I did from the command line the following:
lsnrctl stop;
sqlplus "/as sysdba"
shutdown immediate;
startup;
alter system set processes=150 scope=spfile;
shutdown immediate;
startup;
lsnrctl start;
Now hopefully this will solve it; I'd still like to know how to change the OC4J connection pool settings for the SOA stuff - is this possible at all or does it have some kind of minimum requirement ?
After restarting and testing a few times; my service is actually working so I'm very pleased :)
Regards

BPEL Worklist Portlet returns 500 Internal Server Error

We have the following environment:
Windows Server 2003
OracleAS10g 10.1.2.0.2 (infrastructure and midtier).
Then I upgraded to portal 10.1.4.0.0.
Oracle BPEL Process Manager 10.1.2.0.2 is installed in the Midtier-home and integrated/connected to OID/single sign-on.
All BPEL components work OK.
I have deployed BPELPortlet.ear using dcmctl and I have registered the provider with Oracle Portal.
The administration/console BPEL portlets work OK.
But, both the BPEL Worklist Portlet and the BPEL Worklist Analysis Portlet return the error:
"Error: The listener returned the following Message: 500 Internal Server Error"
Does anyone know what is wrong here?
Is this a privilege problem?
Thanks and regards
Frank

Frank, I'd recomment checking the opmn log for the oc4j_portal container.. this should shed some light what's going (wr)on(g)...
thx clemens

BPEL worklist and matrix organization

We are using 11g oracle bpel worklist. We are using the active directory(AD) provider for our users. In our AD each user has a manager.
Here is the problem:
- in most of our bpel human tasks we need to use a manager hiearchy that is different from the one in AD. We have not been able to find any way of doing this in BPEL (worklist).
-The BPEL worklist seems to only support one security provider. We are therefore not able to have different manager hiearchy for different human tasks.
- Is it at all possible to solve this problem with the current BPEL worklist.

Hi Pucha,
In the file system-jazn-data.xml, I can find the new realm added by me.
I reset the new realm to orabpel / hw_services / ruleauthor / ccore/ .......
Then, I restart the server, create new AS and IS connection.
However, I still cannot find the new realm name in the dropdown list of Human task in Jdeveloper.
How to find the new realm in Jdeveloper? Did I miss something?
I also create a new instance, new realm, new roles, new users, new AS connection, and IS connection. But I still cannot find the new realm in the dropdown list in the human task of Jdeveloper.
Thanks.
Edited by: [email protected] on Mar 16, 2009 3:43 PM

BPEL Worklist Performance

I have a requirement for which worklist application fits pretty well. But I am wondering the kind of load this can take. I designed a sample bpel process with Human task and noticed that the process remain in - in-flight state till any action is not taken on it.
So I am bit concerned how BPEL server will handle if we have few thousands of such human tasks are pending. Any experience around this will greatly help me in deciding whether to use worklist or not.

Even in in-flight status, BPEL dehydrate the task details. I have a server where more than couple of thousands instances are always in in-flight status.

How to cosume BPEL worklist as a portlet in webcenter application

Hi,
Can someone guide me how to consume a BPEL worklist application as portlet in webcenter application. I have a BPEL process and have deployed it on BPEL Integration server installed on oracle apllication server. But how to proceed from here? The portlet should show all the tasks exactly as it appears in the worklist applction.
Thanks
Anand

Thanks a lot Cappa. Those links were really helpful and I have completed the POC successfully by integrating my existing ADF application with WebCenter by following the steps mentioned in http://www.oracle.com/technetwork/developer-tools/jdev/ccset62-all-100884.html.
Apart from the links you mentioned, Andrejus pointed to one of his blog entry on the same topic. Please find the same at http://andrejusb.blogspot.com/2009/12/producing-jsr-168-portlets-directly.html
Now, the issue is it's very very slow and it's getting timeout most of the time. I'm getting concurrent modification exception also some times. Both the applications are running on the embedded server that comes with JDev. Have you ever come across it?
Regards,
Antony.

Cannot deploy BPEL process with SSO to BPELConsole activated

I cannot deploy BPEL process with SSO to BPELConsole activated. Here is the error I get from JDeveloper (sorry for the french error message):
Problème détecté lors de la connexion au serveur "ssdvoiagu.dev.local.csst.qc.ca" sur le port "7781" : java.security.AccessControlException: access denied (com.collaxa.security.DomainPermission generique read)
at java.security.AccessControlContext.checkPermission(AccessControlContext.java:264)
at java.security.AccessController.checkPermission(AccessController.java:427)
at com.collaxa.security.OC4JSecurityService.checkAccess(OC4JSecurityService.java:16)
at com.collaxa.security.SecurityService.checkDomainAccess(SecurityService.java:26)
at com.collaxa.cube.fe.util.ServletUtils.getLocatorWithoutUrlRewrite(ServletUtils.java:162)
at deployHttpClientProcess.jspService(_deployHttpClientProcess.java:332)
at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:462)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
at oracle.security.jazn.oc4j.JAZNFilter$1.run(JAZNFilter.java:396)
at java.security.AccessController.doPrivileged(Native Method)
at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:410)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:623)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:302)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:190)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)
Target BPEL process manager runs under SOA 10.1.3.3. When the SSO to BPELConsole is disabled, the deployment works just fine. Is there any way to make it work with SSO?

Please check:
http://blog.jpoot.com/category/oracle-appserver/oid-ldap/
We had some issues with SSO and SSL but everything is running now.
Marc

Issue about Invoking a BPEL Process with the Generic Java API

I Invoking a BPEL Process with the Generic Java API and apache axis or axis2
it turn up a error as follow:
org.apache.axis2.AxisFault: ORABPEL-08021
Cannot find partner wsdl.
parnterLink "BPELProcess1" is not found in process "BPELProcess1" (revision "v2008_11_17__38943").
Please check the deployment descriptor of the process to find the correct partnerLink name.
     at org.apache.axis2.util.Utils.getInboundFaultFromMessageContext(Utils.java:512)
     at org.apache.axis2.description.OutInAxisOperationClient.handleResponse(OutInAxisOperation.java:370)
     at org.apache.axis2.description.OutInAxisOperationClient.send(OutInAxisOperation.java:416)
     at org.apache.axis2.description.OutInAxisOperationClient.executeImpl(OutInAxisOperation.java:228)
     at org.apache.axis2.client.OperationClient.execute(OperationClient.java:163)
     at org.apache.axis2.client.ServiceClient.sendReceive(ServiceClient.java:548)
     at org.apache.axis2.client.ServiceClient.sendReceive(ServiceClient.java:528)
     at wf.Test_axis2_callws.main(Test_axis2_callws.java:41)
i can't solve it !
what's problem ???
anyone use java code to invoke bpel process successfully..can show me some example?
thanks
chan

Hi,
Check below link may help you solve your problem.
http://www.activevos.com/cec/samples/content/sample-invoke/doc/index.html
Regards

How to start BPEL process with publishing initiation form designed in ADF

Hii All,
Can Anyone please tell me how to Start my BPEL process with publishing initiation forms designed in ADF fusion.
I am using JDevloper 11g and Oracle SOASuite 11g toolset in windows platform.
Thankx in Advance,
Deekay.

Hi,
I assume you mean the JMS example under the $OH BPEL examples area. Unfortunately, this only shows how to get a BPEL process kicked off by awaiting a JMS message - but there is no test code there! There are specific examples which show off the testing framework facilities but it appears that all the examples which use async type of interactions are in the middle of a process which is kicked off by a normal synchronous client interaction.
Any further help much appreciated.
Colin.

BPEL worklist with Psft 9

Similar Messages

Maybe you are looking for