BPM configurable parameters
Hello *,
I would like to ask 2 questions regarding BPM:
1) Is there a way to use BPM configurable parameters in order to configure the timeout of a block?
2) Where can I find a blog explaining the use of BPM configurable parameters?
Kind regards,
Heiko
check this blog- this might give u information to start....
http://wiki.sdn.sap.com/wiki/display/XI/UserDecisionstepinSAPPI7.1-Part+I
chirag
Similar Messages
-
Hi
We need to configure some settings for VM using vCloudDirector REST API other wise which can be down in 2 following ways.
1. On VCenter -> select VM ( in Power Off Mode ) -> Edit Settings -> Options -> Advanced -> General -> Configuration Parameters
Add row with values like below
ethernet0.ctxPerDev = 1
2. -OR- directly login to Esxi Shell .. Open VMX file ( of the VM - which can be located in /etc/vmware/hostd/vmInventory.xml ) and add entries manually.
Follow this KB http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1714
for editing VMX file.
We would like to know how this can be achieved using vCloud Director REST. We are using 5.5 versions for both VCD and VCenter.
Thanks for help.
Regards,
Murali G DThis level of modification is not available via vCloud Director's API afaik. A similar question came up recently about modifying the amount of Video Memory on a VM, which you have to create some sort of custom workflow directly to vCenter/ESXi about.
-
Which driver to use in the BPM Configuration Steps?
Hi,
I´m in the BPM configuration steps and we will use BPM on a Weblogic Server, I´m in the step when you need to create to JDBC Data Sources for the Enterprise and Directory Databases, do you know which driver shoul I use? should it be XA o Non-XA?
Thanx in Advanced!
Kind Regards,
Gerardo JSince there are no drivers, you can create your own, request one, use the Instrument I/O Assistant, or hope someone has one and posts it here. For help on creating one or requesting one, see the main Instrument Driver Network page. As long as you are familiar with the instrument and have the manual, creating a driver is not that hard.
-
BPM Configuration Error on Weblogic Configuration
Hi,
I try to configure BPM Directory and always get error on wlst.sh command
weblogic.common.resourcepool.ResourceSystemException: Cannot load driver class: weblogic.jdbcx.oracle.OracleDataSource
My system spec:
- Solaris SPARC 64
- Weblogic 10.3.0.0 using JRockit 1.6.0_16
- BPM 10gR3
The configuration error in weblogic configuration.
Really need help here..
Thanks
Regards,
Eric WijayaHi Eric,
Just checking: Are you using BPM 10.3.2?
Do you mean the BPM Directory Configuration?Yes, I'm talking about the directory configuration and the engine configuration too.
I've configure the BPM Directory to use BPM's Oracle Driver Version:10,11 which is selected by default by the BPM Configuration Wizard but still got the jdbc driver error. If you are using 10.3.2, you will see that there is another driver called: "Oracle Driver Version:10,11" (without BPM!!). You must use that driver. (if you install the latest 10.3.2 HF, that driver is the default one).
If you don't have that driver, then you are using an older version than 10.3.2. Please migrate to 10.3.2.
Hope this helps,
Ariel -
JSF 1.2 web.xml configuration parameters
Actually, I know these JSF 1.2 web.xml configuration parameters:
javax.faces.CONFIG_FILES
javax.faces.DEFAULT_SUFFIX
javax.faces.LIFECYCLE_ID
javax.faces.STATE_SAVING_METHOD
Are there any more available?
(I have to study its performance implications in conjunction with RichFaces ones).The JSF 1.2 specification document would contain the information you're looking for.
-
Syntax error in profile relation while retreiving configuration parameters
Trying to get our Directory Services properly functioning after an IP change. Running
# kadmin.local -q listprincs
yesterday revealed that all service principals weren't set up properly. Dig dig dig... found that I might (since this server was originally 10.3--now it's 10.4.4) try
# slapconfig -kerberize diradmin
That pointed me in the direction of using Workgroup Manager to fix a couple things with the KerberosClient record for the server. Did that. Reran the command. It complained about an improperly formatted configuration file because it wiped the contents of edu.mit.Kerberos (took out the DNS bits). Then ran
# kerberosautoconfig -u
which resulted in
MergeLoggingInfo: creating default logging info
At this point, edu.mit.Kerberos looked good. Then I tried
# /usr/sbin/kdcsetup -f /LDAPv3/127.0.0.1 -w -a diradmin -p ** -v 1 REALM
which resulted in
Contacting the Directory Server
Authenticating to the Directory Server
Creating Kerberos directory
Creating KDC Config File
Creating Admin ACL File
Creating Kerberos Master Key
Creating Kerberos Database
Syntax error in profile relation while retreiving configuration parameters
SendInteractiveCommand: failed to get pattern
Creating Kerberos Admin user
kadmin.local: Syntax error in profile relation while initializing kadmin.local interface
Adding kerberos auth authority to admin user
Creating keytab for the admin tools
kadmin.local: Syntax error in profile relation while initializing kadmin.local interface
Adding KDC & kadmind to launchd
Adding the new KDC into the KerberosClient config record
edu.mit.kadmind: Already loaded
com.apple.kdcmond: Already loaded
Finished
Now when I try
# kadmin.local -q listprincs
I get
Authenticating as principal root/admin@REALM with password.
kadmin.local: Syntax error in profile relation while initializing kadmin.local interface
And now I'm getting this in kdc.log
Feb 07 09:41:26 od.master.fqdn krb5kdc[21234](info): AS_REQ (7 etypes {18 17 16 23 1 3 2}) xx.xx.xx.xx: LOOKINGUPCLIENT: diradmin@REALM for krbtgt/REALM@REALM, Database is locked or in use--try again later
Feb 07 09:41:26 od.master.fqdn krb5kdc[21234](info): DISPATCH: repeated (retransmitted?) request from xx.xx.xx.xx, resending previous response
Help!
Thanks,
Rich
ps. The typo in the error message is MIT's, not mine. I guess their engineering departments are better than their English department.
Xserve G5 Mac OS X (10.4.4)Look at the two config files:
/Library/Preferences/edu.mit.Kerberos
/var/db/krb5kdc/kdc.log
the Database is locked or in use message is due to a missing lock file.
Look in /var/db/krb5kdc/ for principal.kadm5.lock
Hope this gets you started
- Leland -
Report program to find the configuration parameters of the system?
Hi,
Is there any standard program in SAP to find out the configuration parameters or the configuration settings of the system and any program to find the configuration settings across systems?
thanks & regards,
siddhartha.
P.S : Points will be rewarded.Can you concretize your question ? For what purposes ? The "system" is the front-end or server where sap are installed? Chek the RZ20 and ST06. Regards.
-
Showing RMAN configuration parameters 8.1.7
Hi group
What is the RMAN command in 8.1.7 to show RMAN configuration parameters, I know (SHOW ALL;) command is used in 9i version but it doesn't work on 8.1.7.
Thanks you very muchIf I remember correctly, you could NOT configure and preserve parameters in 8.1.7 (so CONFIGURE and SHOW are not present in 8.1.7 RMAN).
You could create scripts with all the required commands and save them to the OS or to the Catalog -- preferably at the OS level so that they can be viewed and edited if the Catalog becomes unavailable.
Hemant K Chitale -
Problem with BPM Configuration
Hi,
I'm not able to get the process of BPM Configuration.
My Scenario is
File->R/3(BAPI)->File(Response),through BPM
1.Do i need 2 Business Service?
Is the flow like this?
File->IP->SAP->IP->File.
If it is correct then why do I need Business Service?
Correct me if i am wrong.
I'm very much confused with BPM,Need Help.
Regards,
Prashanth K.R,Hi Prashanth,
>>1.Do i need 2 Business Service?
no you don't need 2 one is enough
but in fact sometimes it's good to have two...
let's say one folder ackts as a foderl for storing XML files on one server for CRM data
the second on is for txt data for EDI
if you use two then you know which folder is responsible for what...
BTW
use can define Business Service in less then 20 seconds
>>>File->IP->SAP->IP->File.
If it is correct then why do I need Business Service?
you use business services to define that file adapter
is not connected to any other application
if you just use a file folder on ftp then you have to create a business service to define the sender/receiver
Regards,
michal
Message was edited by: Michal Krawczyk -
NEW 9I RMAN: PERSISTENT CONFIGURATION PARAMETERS - INTRODUCTION
제품 : RMAN
작성날짜 : 2001-11-09
NEW 9I RMAN: PERSISTENT CONFIGURATION PARAMETERS - INTRODUCTION
===============================================================
오라클 9i 부터는 RMAN 에서 항상 사용되는 파라미터 세팅을 고정적으로 할 수 있게
되어 매번 파라미터를 주어야 하는 수고를 하지 않아도 된다.
Persistent Configuration Parameters 기능은 RMA 에 다음과 같은 변화를 주었다:
* RMAN 에서 파라미터의 디폴트를 DBA 가 커스터마이징 할 수 있게 되어 사용이 편리해졌다.
* 한번 커스터마이징한 파라미터는 모든 Job 에 적용이 된다.
* DBA 는 'BACKUP DATABASE' 명령어 하나만으로 RMAN 에서 데이터베이스 백업을 수행
할 수 있게 되었다.
* 오라클 9i 의 CONFIGURE 명령어는 RMAN 의 default setting 을 영구적으로 바꾸어 준다.
* 파라미터의 값은 컨트롤파일에 저장이 되며 필요한 경우에는 리커버리 카다로그와 맞추어
주는 과정이 필요하다.
오라클 9i RMAN 에서는는 'show' 명령어로 현재의 파라미터 세팅을 확인 할 수 있다.
SHOW show_operand [,show_operand ...];
show_operand: RETENTION POLICY |
EXCLUDE |
BACKUP COPIES |
CHANNEL |
DEFAULT DEVICE TYPE |
DEVICE TYPE |
SNAPSHOT CONTROLFILE |
ALL
'show all' 명령어로 현재의 모든 세팅을 확인 한다.
RMAN> show all;
using target database controlfile instead of recovery catalog
RMAN configuration parameters are:
CONFIGURE RETENTION POLICY TO REDUNDANCY 1; # default
CONFIGURE BACKUP OPTIMIZATION OFF; # default
CONFIGURE DEFAULT DEVICE TYPE TO DISK; # default
CONFIGURE CONTROLFILE AUTOBACKUP OFF; # default
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '%F'; # default
CONFIGURE DEVICE TYPE DISK PARALLELISM 1; # default
CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE MAXSETSIZE TO UNLIMITED; # default
CONFIGURE SNAPSHOT CONTROLFILE NAME TO '/beta/app/oracle/product/9.0.1/dbs/snapc
f_V901.f'; # default
이렇게 Persistent Configuration Parameters 를 세팅하기 위해서는 스크립트를 만들어
수행 하는 것이 좋다:
run {
# Use the configure commands to create your backup policy.
# When complete these will be the new persistent
# configuration parameters for RMAN in the controlfile
# of the target datbase.
CONFIGURE RETENTION POLICY TO REDUNDANCY 3;
CONFIGURE BACKUP OPTIMIZATION OFF;
CONFIGURE DEFAULT DEVICE TYPE TO DISK;
CONFIGURE CONTROLFILE AUTOBACKUP ON;
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO
'/proj/SME9i/backup/%F';
CONFIGURE DEVICE TYPE DISK PARALLELISM 2;
CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE DISK TO 1;
CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE DISK TO 1;
CONFIGURE MAXSETSIZE TO UNLIMITED;
CONFIGURE SNAPSHOT CONTROLFILE NAME TO '/proj/SME9i/backup/snapf_prod9.f';
이렇게 스크립트를 수행 한 후에 결과를 확인 하기 위해서는:
RMAN> show all;
RMAN configuration parameters are:
CONFIGURE RETENTION POLICY TO REDUNDANCY 3;
CONFIGURE BACKUP OPTIMIZATION OFF;
CONFIGURE DEFAULT DEVICE TYPE TO DISK;
CONFIGURE CONTROLFILE AUTOBACKUP ON;
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO
'/proj/SME9i/backup/%F';
CONFIGURE DEVICE TYPE DISK PARALLELISM 2;
CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE DISK TO 1;
CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE DISK TO 1;
CONFIGURE MAXSETSIZE TO UNLIMITED;
CONFIGURE SNAPSHOT CONTROLFILE NAME TO '/proj/SME9i/backup/snapf_prod9.f';
결과는 위와 같다.
--------------THE END------------------------------------------------------Search button?!?!
Re: seek some good documents on Recovery MANager to start with
Aron -
The configuration parameters of 'BAPI_CUSTOMERCONTRACT_CHANGE'
Hi experts,
I want to use 'BAPI_CUSTOMERCONTRACT_CHANGE' to delete item 000020 in contract 12345678.But alway failed.Please reference below data.
Contract : 12345678
Item Material High level Item
000010 HA001
000020 HA002 000010
I guess it's the configuration problem.But I don't know how to maintain related configuration parameters in 'BAPI_CUSTOMERCONTRACT_CHANGE'.So who can give me some similar sample or help?Many thanks.
Thanks & RegardsUsing this method, you can change or delete contracts.
You can change header data, item data, schedule line data, contract data and configuration data.
In general the following applies:
1. Only enter fields that you want to change.
2. Mark the fields you want to change with an X.
3. Fill in the UPDATEFLAG field with a U.
4. Always enter the key fields when making changes, including in the checkbox list.
5. An exception is configuration. If you change this, you must fill it in completely.
6. Enter quantities and dates under schedule line data.
7. Possible update flags: U = change
D = delete
I = insert
Example
1. Delete complete contract
2. Delete contract item
3. Changes to contract
4. Change configuration
Notes
1. Minimum entries required:
You MUST enter the contract number in the SALESDOCUMENT structure.
You must always enter key fields when you make a change.
You must always enter the update indicator in the INQUIRY_HEADER_INX.
2. Commitment control
The BAPI does not carry out a database commit. This means that the calling application must leave the commit in order to have changes made to the database. BAPI_TRANSACTION_COMMIT is available for this purpose. -
BAPI_SALESORDER_CREATEFROMDAT2
Can some one tell me what the fields mean, I know they are related to the configuration parameters in VA01... but what i want to know is what are the values to be passed into these structures and how...
if possible can some one also specifically tell me the meaning of config_id root_id inst_id.... what is the concept SAP has used to design these configuration parameters screens etc... what are the classes etc fs it related to PP module)
ORDER_CFGS_REF
ORDER_CFGS_INST
ORDER_CFGS_PART_OF
ORDER_CFGS_VALUE
ORDER_CFGS_BLOB
ORDER_CFGS_VK
ORDER_CFGS_REFINST
Thank you.
Points awarded.These flds are for config materials related....
-
Change hardcodes for "configuration parameters"
Hi all,
my app WD has some hardcodes (i.e: GP process ID, URLs etc) and i would like to convert these ones in a some "configuration parameters" to make the code more flexible. Is it possible? if yes, please, give me an example how to do that!
Thanks all,
Dougyou can put them on configuration or properties file, as set of key-value, and maintain that configuration file from visual administrator
check [Configuration Service|http://help.sap.com/saphelp_nw04/helpdata/en/b8/aa343e32ff1033e10000000a114084/frameset.htm] on help:
http://help.sap.com/saphelp_nw04/helpdata/en/b8/aa343e32ff1033e10000000a114084/frameset.htm
firs this:
Property File in Webdynpro
else/as complements:
URGENT** Can not read Configuration properties file
How to create property file
Also you can place them on a Ztable on R3 and load them from within a BAPI -
VLD-1124: Schema and/or Database link physical configuration parameters
Hi!
The warning message:
VLD-1124: Schema and/or Database link physical configuration parameters should not be set for Table1.
Is it possible to eliminate this warning message ? Anyway , Thanks for your response!
Bye!Hi guys,
I am facing a strange problem. The code generated for my mapping has NOT used the dblinks. My OWB version is 10.1.0.4
This is my problem in brief.
I have installed OWB newly and started to do a sample task. I created a very simple one to one table population mapping from source to the target schema. Both are in the same database.
When i generated the code for the mapping, it gave a warning 'VLD-2771: System privileges may not allow extraction from source EMP'.
When i checked the code which was generated, i couldnot see any dblinks associated with my source table( which seems strange)
CURSOR "INGRP_c" IS
SELECT
"EMP_SRC_TRG_CONN"."EMPNO" "EMPNO",
"EMP_SRC_TRG_CONN"."ENAME" "ENAME",
"EMP_SRC_TRG_CONN"."JOB" "JOB",
"EMP_SRC_TRG_CONN"."MGR" "MGR",
"EMP_SRC_TRG_CONN"."HIREDATE" "HIREDATE",
"EMP_SRC_TRG_CONN"."SAL" "SAL",
"EMP_SRC_TRG_CONN"."COMM" "COMM",
"DEPT_SRC_TRG_CONN"."DEPTNO" "DEPTNO_1",
"DEPT_SRC_TRG_CONN"."DNAME" "DNAME",
"EMP_SRC_TRG_CONN"."DEPTNO" "DEPTNO",
"DEPT_SRC_TRG_CONN"."LOC" "LOC"
FROM "SCOTT"."EMP" "EMP_SRC_TRG_CONN" ;
In brief this is the process i have done.
Source schema : SCOTT & Target schema : TRG_SCHEMA
1) I have created source (for SCOTT) and target(for TRG_SCHEMA) modules.
2) I have also created DBLinks, Locations and Connector from source to the target locations.
3) I registered both the source location and target locations.
4) Validated, Generated and Deployed the Connector from source to the target.
I was unable to trace the error. Did i miss anything in the configuration? or during the installation of OWB.
Though it is a very old post, i hope someone can help me out here.
Thanks in Advance,
Sri -
Documentation of Configuration Parameters
Just upgrading to ASE 15.7 from 15.5 and looking at the the configuration parameters.
Anyone have any good documents for these configuration parameters - the online documentation isn't very good.
aggresive task stealing - aggressive task stealing sets the SAP ASE scheduler task stealing policy to aggressive.
auto query tuning - not in the manual
enable plan sharing - enable plan sharing enables or disables SAP ASE to use shared query plans.
( I can guess what it does - any reason not to enable it ?)
enable plan sharing - enable plan sharing enables or disables SAP ASE to use shared query plans.
enforce dump configuration - not in the manual
engine local cache percent - not in the manual
optimise dump for faster load - not in the manual
streamlined dynamic SQL - streamlined dynamic SQL enables the statement cache to store dynamic SQL statements
(I can guess what it does - any reason not to enable it?)Dump configuration is described in SAP Note 1588316
Also have a look at procedure sp_config_dump in Sybooks ASE 16
Unfortunately not much info what's actually enforced with parameter
enforce dump configuration
Maybe you are looking for
-
For the Primary Key Field with the combination of other fields
Hai I Have a problem in creating trigger for the following the problem goes like this.. i have a table with the fields fld1 (varchar2(6) fld2(varchar2(20)) fld3 (number) the fld1 is a primary key. here in this table i am inserting the values .. At th
-
IPad "notes" not findable on iCloud
Altho I do supposedly save to iCloud, I cannot find my Ipad "Notes" these when I log on to my iCloud account from my laptop. Any ideas? Thanks, James Old iPad version 5.1.1 - supposedly this is fine iCloud is indeed enabled for "notes" as well as "do
-
Does it all have to be in 1 Flash document?
i'm doing a flash home page with a simple animated intro, which ends in a static page with links to html pages. so when i test the movie in flash everything goes right. so i publish. then i open the html file in my browser that the publish created. t
-
how can i make sure 10.9.2 installs?
-
Upload [Flat File]
Hi I'm using oracle apps R12.. in oracle apps R12 is there any possibility to upload flat file into oracle apps? from client side? plzz help