BPM_DATA_COLLECTION fails with (Output device "" not known) error

Hi all,
I have an issue with Output BPM_DATA_COLLECTION_1 job in the satellite system failing with 'Output device "" not known error. Since it is collecting data for Solution Manager system why does is it trying to find an output device.
It did not fail before and now I added another key figure (custom one) which is done the same way the other custom monitors are done in "Z_BPM_ECU_COLLECTOR" report and then in /SSA/EXM program, but the collector job started to fail.
Also, for some reason there are two BPM_DATA_COLLECTION jobs, one is BPM_DATA_COLLECTION_1 and the other is BPM_DATA_COLLECTION_2. _1 runs every 5 min and _2 is less frequent. They both seem to runt the same job which is /SSA/EXS. Why are there two jobs scheduled from solution manager in my satellite system?
Thank you very much for your help!

I am experiencing this same issue in our ECC 6.0 system. We currently have ST-A/PI release 01M_ECC600 level 0001 applied to our system. These jobs finish successfully in SM37, but I'm seeing the same error messages in our system logs (SM21).
When I try to update the output device that is associated with these jobs, the user ID running the jobs is not valid since it's user type is Communication Data.
Does anyone know if it ok to change the user for this job? Should it be run by DDIC? I believe the jobs were created automatically when we applied ST-A/PI release 01M_ECC600 level 0001.

Similar Messages

Output device "" not known

Hi Expert,
I try to execute SWU3 for automatic customizing workflow on ECC 6.0.
I have got error Output device "" not known and no background job is executing in my system .
This error I am getting for this activities
Schedule Background Job for Missed Deadlines
Schedule Background Job for Work Items with Errors
Schedule Background Job for Condition Evaluation
Schedule Background Job for Deadline Monitoring
I search in other topic, it mention that basis guy do something bot not clear how to solve it.
Please help me.
Thanks in advance.

Hi Karri,
Thanks for the reply.
Yes I do have authorization for execute SWU3. My user ID have same authorization as sap*.
WF-Batch User Exist, RFC for workflow localXXX also set.
From thread : Error activating SWU3 - output device "" unknown
I see this issue solve by basis, they adding some parameters to start and instance profile.
But I have no idea which parameters.

Output device not defined error while saving the quotation

Hi all,
We have some custom output types (ZGEN, ZSSO, ZQTO, ZJT)configured in the nace transaction for Application V1. Whenever i am creating / saving a quotation one of the output type(ZQTO) is not processing for mail (External Send) and it is displaying an error as 'Output device not defined'. If i remove all the output types while changing the quotation in VA22 from header, it is processing.
I checked with all other output types combination. The error is trigerred only when we have ZJT output type along with ZQTO.
We are not able to recognise the error. Please help out to solve this issue. Its very urgent.
Thanks.

Hi Remi
Thanks for your reply. As per your reply I followed procedure and it allowed me to save Basic Pay Infotype (0008)
Thanks a ton.
Regards
Prakash Bhave

Content Browser (0BCT_CB_1) load fails with conversation id not found error

Hi,
I am suddenly experiencing a problem with loading data to the content browser cube using infosource 0BCT_CB_1. The load fails with an error saying: "Conversation 76635612 not found / CPIC-CALL: 'ThSA". Does anybody know how to solve this?

Hi,
Were you able to get this fixed?
I am getting same issue while loading to BI 7.0 technical content.
Thanks
SA

Powershell import-spweb fails with "parent does not exist" error.

So, I have a sp 2010 site at http://myfarm/sites/it/d22 and I want to copy the contents to
http://myfarm/sites/bb/d62 .
I perform
Export-SPWeb -Identity http://myfarm/sites/it/d22  -Path d:\temp\d22
-IncludeUserSecurity –IncludeVersions All -NoFileCompression –Verbose
and then I perform
import-spweb -identity http://myfarm/sites/bb/d62 -path d:\temp\d22   -includeusersecurity -nofilecompression -verbose -force
It runs for 4-5 minutes and then produces the error:
[Folder] []   Error: The file cannot be imported because its parent /sites/bb/d22/ADMIN does not exist.
[Folder] []   Error: The file cannot be imported because its parent /sites/bb/d22/ADMIN does not exist.
FatalError: The file cannot be imported because its parent /sites/bb/d22/ADMIN does not exist.
Progress: Import did not complete.
Finish Time: 6/11/2014 8:59:23 AM.
Duration: 00:03:40
Finished with 0 warnings.
Finished with 3 errors.
Log file generated:
        d:\temp\d22\import.log
Import-SPWeb : The file cannot be imported because its parent /sites/bb/d22/ADMIN does not exist.
At line:1 char:13
+ import-spweb <<<< -identity
http://myfarm/sites/bb/d62 -path d:\temp\d22   -includeusersecurity
-nofilecompression -verbose -force
    + CategoryInfo          : InvalidData: (Microsoft.Share...CmdletImportWeb:SPCmdletImportWeb) [Import-SPW
   eb], SPException
    + FullyQualifiedErrorId : Microsoft.SharePoint.PowerShell.SPCmdletImportWeb
Of course bb/d22/ADMIN does not exist - d22 exists under sites/it . And Admin should be part of the export of d22 that should be created if the process completes.
Anyone have any idea what is going on here?

http://www.livingonthecloud.net/2010/05/exporting-and-importing-sharepoint.html
This error is not helpful and for us the problem was permission related. We had used users (albeit domain admin accounts) to export and import the data that were different from the site collection administrators. To fix we had to do the following:
Make sure the site collection administrator is the same on both the source and destination servers.
When running the export and import, make sure you are running the stsadm commands as the site collection administrator. This ensures the permissions are aligned and the import should work.
stsadm Import error: The 'ASPXPageIndexMode' attribute is not declared
Not sure what the cause of this error is, but we found a fix online:
To get round it I edited C:\Program Files\Common Files\Microsoft Shared\web server extensions\12\TEMPLATE\XML\DeploymentManifest.xsd on the destination server:
under section
   
I added the following.
<xs:attribute name="ASPXPageIndexMode" type="xs:string" use="optional"></xs:attribute>
<xs:attribute name="NoCrawl" type="xs:boolean" use="optional"></xs:attribute>
<xs:attribute name="CacheAllSchema" type="xs:boolean" use="optional"> </xs:attribute>
<xs:attribute name="AllowAutomaticASPXPageIndexing" type="xs:boolean" use="optional"></xs:attribute>

Boot Device Not Found Error Message

I've had my laptop since May 2011. HP Pavilion dv6
Quad-Core AMD Phenom II 2.2 GHz
DDR3 SDRAM 8 GB
500 GB Serial ATA 7200 rpm hard drive.Originally Windows 7 64-bit upgraded to Windows 10 64-bit One morning I turned on my laptop and I received the following error. The laptop lives on my desk, hasn't undergone any major changes, and I haven't moved or dropped it. I've run every diagnostic test from the F2 menu. The hard drive and memory both passed, the system tune up passed, and I've restored the BIOS to the default settings with no changes. If I hold the power button and restart the laptop usually on the 2nd or 3rd attempt the system will start normally with no issues and continue on as if nothing is wrong. This is a helpful work around but it doesn't solve the problem which is a bit of an annoyance and leaves me worried that eventually it might refuse to start at all. Thinking that a system restore might help I ran a recovery and brought it to an "out of the box" state. After that failed I decided to go ahead and upgrade from Windows 7 to Windows 10. I performed a clean install keeping none of my programs or personal files. Despite a successful Windows 10 install I still receive the same error every time I restart. The short version:When I turn on my laptop I encounter a Boot Device Not Found Error Message.My hard drive passes diagnostic tests.My laptop will start eventually if I continue to power cycle it.

@pkharel ,
Hello and thank you for posting on the HP support forums. So that I can better help you here with this hard drive issue . Can you explain what diagnostic you ran on the hard drive.
Did you run the diagnostics from the BIOS?
HP Notebook PCs - System Diagnostics (F2)
HP PC Hardware Diagnostics
If you have attempted the diagnostics from the BIOS and are not finding the Hard drive. See if you can find the hard drive in another computer. If you can not find it using another computer replace the drive. If you can and it is not located on your notebook then you have a possible issue with the motherboard.
First thing I would do is try and restore your BIOS first.
Restoring the BIOS
After attempting this and you still can not find the Hard drive and you can see it in another system please contact HP phone support for repair options.
Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
If the hard drive is not detected in another system then replace hard drive.
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
D5GR
I work on behalf of HP

ISE upgrade failing with "% Manifest file not found in the bundle"

Hello
I am trying to upgrade a brand new ISE 3395 from 1.0.3.337 to 1.0.4 (latest). It keeps failing with
% Manifest file not found in the bundle
Here is the output:
company-ise-01/admin# application upgrade ise-appbundle-1.0.4.573.i386.tar.gpg ftp
Save the current ADE-OS running configuration? (yes/no) [yes] ?
Generating configuration...
Saved the ADE-OS running configuration to startup successfully
Initiating Application Upgrade...
% Manifest file not found in the bundle
fusd-ise-01/admin# sh application version ise
Cisco Identity Services Engine
Version      : 1.0.3.377
Build Date   : Fri May 6 19:30:37 2011
Install Date : Wed Oct 12 22:18:26 2011
I can't find anything about this for ISE, although there are a lot of topics for the same error for ACS. Thanks in advance.
Saro

Same problem with 1.1.2 and 1.1.1 patch 5:
ISEcdemo/admin# sh ver
Cisco Application Deployment Engine OS Release: 2.0
ADE-OS Build Version: 2.0.4.018
ADE-OS System Architecture: i386
Copyright (c) 2005-2011 by Cisco Systems, Inc.
All rights reserved.
Hostname: ISEcdemo
Version information of installed applications
Cisco Identity Services Engine
Version      : 1.1.1.268
Build Date   : Mon Jun 25 05:49:23 2012
Install Date : Wed Sep 12 09:12:53 2012
Cisco Identity Services Engine Patch
Version      : 1
Install Date : Wed Sep 12 10:01:22 2012
Cisco Identity Services Engine Patch
Version      : 2
Install Date : Wed Sep 12 13:10:36 2012
Cisco Identity Services Engine Patch
Version      : 3
Install Date : Tue Nov 27 12:33:19 2012
Cisco Identity Services Engine Patch
Version      : 4
Install Date : Tue Nov 27 12:52:50 2012
ISEcdemo/admin# patch install ise-patchbundle-1.1.1.268-5-68046.i386.tar.gz my2
Save the current ADE-OS running configuration? (yes/no) [yes] ? yes
Generating configuration...
Saved the ADE-OS running configuration to startup successfully
Initiating Application Patch installation...
% Manifest file not found in the bundle
ISEcdemo/admin#
ISEcdemo/admin# application upgrade ise-appbundle-1.1.2.145.i386.tar.gz my2
Save the current ADE-OS running configuration? (yes/no) [yes] ? yes
Generating configuration...
Saved the ADE-OS running configuration to startup successfully
Initiating Application Upgrade...
% Manifest file not found in the bundle
Can someone verify the downloaded file details? They are different from cisco.com values:
-bash-4.1$ /usr/bin/md5sum.exe /cygdrive/c/munka-unenc/tftp/ise-appbundle-1.1.2.145.i386.tar.gz
2aa9b75ef5d7c1662a1a51844f178b77 */cygdrive/c/munka-unenc/tftp/ise-appbundle-1.1.2.145.i386.tar.gz
-bash-4.1$ /usr/bin/ls -lAp /cygdrive/c/munka-unenc/tftp/ise-appbundle-1.1.2.145.i386.tar.gz
-rwx------+ 1 Administrators Domain Users 1583851520 Nov 29 00:14 /cygdrive/c/munka-unenc/tftp/ise-appbundle-1.1.2.145.i386.tar.gz

HP Device Not Found Error when trying to print or scan wireless- HP Officejet Pro L7590

Have had HP Officejet Pro L7590 All-In-One Printer for years. Always worked fine and I had no issues printing via wireless connection. Several months ago.. Possibly after a Windows 8 update. From Windows 8 to Windows 8.1 I have not been able to use the printers wireless feature. When I try to print or scan it shows the printer as offline. Also get an error message that tells me "HP Imaging device is not found". I can still print when connected to USB. Cannot scan or use features of the HP software suite. I have tried several times to correct. Reloading the software and drivers several times, but no success. I just tried again and was able to print the test page wireless, so got all excited and thought I fixed it. Then tried to print something and got the same error message I have seen in the past. I have talked to certain supports saying that it may be a firewall setting within Windows. Any other suggestions? Thanks

Hi @rfjones002,
Welcome to the HP Support Forums! I see you are not able to print or scan wirelessly to your HP Officejet L7590 and your computer running the Windows 8.1 Operating system. You get a 'Printer offline' or 'HP Imaging device not found' errors.
I would like you to start with the steps listed below:
Hold down the Windows Logo key () on the keyboard and the 'R' to open the run box, type %temp%
Delete all files and folders from the temp folder. Choose skip if any pop ups appear saying any of the files could not be deleted
Uninstall the software again - Uninstall the Printer Software Instructions
When the uninstall has completed restart the computer
Follow these steps to reset the registry settings and options for Windows Installer.
Hold down the Windows Logo key on the keyboard and the 'R' to open the run box
In the Open box, type
msiexec /unregister
and then click OK.
Hold down the Windows Logo key on the keyboard and the 'R' to open the run box
In the Open box, type
msiexec /regserver
and then click OK
*Note: there is a space between the c and the /
If you have any difficulty with this step, please use this link to perform it another way. Restarting Windows Installer
Run Disk cleanup from Accessories\ System Tool < How to Delete files using Disk Cleanup
Download and install the latest version of Adobe flash player http://www.adobe.com/support/flashplayerflashplayer/downloads.html
Perform a clean boot > How to perform a clean boot in Windows
Download the following SP40669 File Download - if this does not download and or install please proceed to the next step.
Turn off the Real-Time Scanning and Firewalls; The image below is a McAfee example, if you have a different antivirus program and need help disabling Real-Time Scanning and Firewalls let me know.
- Image source
Now you can go ahead and download and install the software here >
HP Officejet Pro Full Feature Software and Driver
If you are unable to print a test page, please run the HP Print and Scan Doctor- It was designed by HP to provide users with the troubleshooting and problem solving features needed to resolve many common problems experienced with HP print and scan products connected to Windows-based computers.
Please let me know if this was successful! I will watch for your reply.
Thank you,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Object variable or With block variable not set (Error 91)

I am not a developer, however i have to help to run a VB program.
when using a local administrator to run this program there will be error :
Object variable or With block variable not set (Error 91)
however using a DOMAIN Administrator to run without problem.
any idea

Do you have the source code? The error itself is a nullreference error. It means the code is trying to use some object to access a property of method of that object, but the object is currently null so it fails. The fact that it runs different when you run
as a domain admin versus local admin could mean that it does something via a network location or resource, and when running as a domain admin, it has access to that resource and succeeds, but the local admin doesn't have access to the needed resource, and
the code doesn't check to see if the object is null before using it. If you don't have the source code, then it will be difficult to fix, other than giving the local admin the ability to access whatever it is the program is looking to access.
Matt Kleinwaks - MSMVP MSDN Forums Moderator - www.zerosandtheone.com

Output device not listed.

What if my sound output device not listed? Trying to connect my MacBookPro 17" (mid 2010) to my tv. Video plays. I have connected digital audio cable to both tv n Mac. When I go to sound in system preference (after cord was plugged in) nothing listed.

Very well stated. And, sometimes I do forget that there is still such a thing as celluloid. Not to mention all the new "K"s that RED is coming up with (aren't they working on something like 27 or 28k now?) When I look at it from that point of view, what you say makes perfect sense.
But then why does preferences>video preview in After Effects give me the "output device" option of IEEE 1394 at NTSC 720x480? This leads me to believe that I could plug a deck into 1394 and get a video preview. If this is the case, then my way of thinking says it should offer other options for "output device".
When I first set up Premiere Pro CS4, the playback settings did not list the HDMI HDTV as an external monitor option. It wasn't until I fooled around with the system's display settings and turned the HDTV into an extention of the desktop that suddenly Premiere Pro listed it as a possible external monitor. So, my history there (and my goofy sense of logic that makes perfect sense to me) has me wondering if a similar sequence of messing with the display options is suddenly going to make AE see the HDTV as an "output device". I am not interested in realtime playback, merely the closest reference possible as to what my video image looks like in HD on an external monitor. I ask "why do I need a separate video card like my old Matrox card, when standard graphics cards these days can handle HD & even have HDMI out?"
Admittedly, I know next to nothing about the complexity & inner workings of software and computer components. Why, I was ready to throw a party just because I successfully installed an additional hard drive in my new computer. I must be like one of my own clients who don't understand why we can't easily separate a voice track from a music track when it's been rendered as one .mp3 file...or why we can't quickly cut a person out of a video layer and make them seamlessly interact with footage of JFK, Zemekis-style.

Output device not detected

My Mac Air is in mute mode with no output device detected and I cannot move it out of that mode in system prefs.

I just realized I posted this in the wrong place. I moved it here. http://answers.microsoft.com/en-us/insider/forum/insider_wintp-insider_devices/monitor-on-secondary-display-output-device-not/2dd93e8b-4d29-42dd-9a6f-189992074ae8?tm=1430617069126

ORA-27369: job of type EXECUTABLE failed with exit code: Not owner

Hi
I created a backup RAC database job using DBMS_SCHEDULER under RMANTEST schema (a DBA account) and I got the error as subject.
begin
dbms_scheduler.create_job(
job_name => 'scheduler_backup',
job_type => 'EXECUTABLE',
number_of_arguments => 2,
job_action => '/opt/oracle/admin/bin/rman_fullbackup_RAC_TEST_test.sh',
comments => 'backup via scheduler'
dbms_scheduler.SET_JOB_ARGUMENT_VALUE('scheduler_backup', 1, 'TEST');
dbms_scheduler.SET_JOB_ARGUMENT_VALUE('scheduler_backup', 2, 'TEST2');
dbms_scheduler.enable('scheduler_backup');
end;
Thanks,
Kevin

Hi Ravi
Thanks for your input.
"ORA-27369: job of type EXECUTABLE failed with exit code: Not owner" is what I copied from ADDITIONAL_INFO of USER_SCHEDULER_JOB_RUB_DETAILS.
One thing I don't understand of your words is that
"On 10gR1 and 10gR2 you can redirect the stdout/stderr within your script and take a look at those log files."
In my script, I have log files but I cannot see it. I guess the job fails directly without hitting the redirection line in the script. Do you mean I shall write something like this
dbms_scheduler.create_job (
job_action => '/opt/oracle/admin/bin/backup.sh > backup.log'
Another one is
"make sure that the user that external jobs run as must be able to run your script"
But OS user and database user are two different accounts at different level.
I am using 10.2.0.2 RAC. The Unix script runs successfully every night. I just want to take advantage of DBMS_SCHEDULER to avoid host dependency.
Thanks,
Kevin

Ipad 1 showing as "Device not known" in WIndows 7 ultimate

Hi Folks!!!!
Am struggling here.
I have read a number of articles and tried everything but still no joy.
My computer does not recognise my Ipad 1, in device management it shows under USB as "device not known". I have tried all the suggested steps but no joy.
Any help would be welcomed.

WOW with the help from Apple's Web Site I figured it out.
This URL was very helpful
http://support.apple.com/kb/TS3125
I disabled 'Online Armour' then
and this one even more so...
http://support.apple.com/kb/HT1923
I found out that there is a whole raft of Apple software packages that are interrelated, they needed to be uninstalled in a certain order with the broswer closed.
In some rare instances, it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
Use the Control Panel to uninstall iTunes and related software components in the following order:
1. iTunes
2. QuickTime
3. Apple Software Update
4. Apple Mobile Device Support
5. Bonjour
6. Apple Application Support (iTunes 9 or later)
After they were all uninstalled I restarted windows to make sure the registery was updated properly.
Then all you have to do is reinstall iTunes which will add all of the above back all over again in the proper order.
Then I had to go into Win 7 SERVICES and STOP the new Apple Mobile Service and then restart it again so it would take effect.
Started iTunes, plugged in the iPad and every thing began working as expected.
Thanks Apple.

Device not recognized error

When I try to connect my Ipad1 to PC, I get the "device not recognized error". I tried to connect the Ipad to my Macbook Pro, I get no reaction, the computer does not see the Ipad, does not give a message either.
I re-tried with different cables, different PC's, latest version of itunes etc.
I can charge the Ipad through the wall outlet, no problem for that.
Do you think it is a hardware problem with the USB interface of the Ipad, or a software issue? If so, what can I do to solve this?
Thank you

Here's some relevant information:
http://support.apple.com/kb/ts1591

"USB Device Not Recognized" error when I connect iPod to my PC

I have a brand new 5th gen (I think) iPod.
I have been able to connect it successfully to my home laptop, download music to it and play it so I know the iPod works per se and the cable is ok too.
Now at work (where tons of my music is) when I connect it to my PC here and I get a "USB Device Not Recognized" error pops up from my taskbar. When I click on the message it pops up a "USB Device Not Recognized" window which displays a list of USB ports, and shows "Unknown Device" for the one where the iPod is connected.
I think its probably USB1.something as opposed to USB2.0 but from what I understand that shouldn't matter.
Can anyone suggest anything ?
I've tried the 5R's as far as I can, and I read through this thread:
http://discussions.apple.com/thread.jspa?threadID=500559&tstart=15
but there didn't seem to be anything conclusive.
Thanks for any help,
Jill

First make sure the latest iTUnes is installed on this work PC, IF your allowed to install things on it, the latest iTunes version is 6.0.4.2 and can be downloaded from the apple site (Hit iPod+iTunes tab at the very top of this web page)
Another thing is what version of windows is the work PC? Is it windows XP Windows 2000 Or windows Me 98? iTunes will only run on XP and 2000

BPM_DATA_COLLECTION fails with (Output device "" not known) error

Similar Messages

Maybe you are looking for