BPM error after PI 7.31 SP12 upgrade

We have a bpm scenario where we send a request to a web server and it sends a response message if successful request is sucessfuly processed (synchronous) or else sends us a fault message saying the server is busy at that time.
Now this scenario was working fine before the upgarde, however in the upgarded environment we get an error message:

Opened message with SAP.
SAP's response:
Thanks for XPI inspector traces. We have analyzed and found that
NPE(NullPointerException) is happening while converting the SOAP fault
into an Application fault. We have also gone through the
implementation part. It looks like the variable 'xer' is not properly
handled. Hence we are planning to fix it. So we will get back to you
with an update on this soon. Hope this is fine with you.
Will keep you all posted with SAP's response.
Thanks.

Similar Messages

Error after update installation Method Method 'Upgrade' in type ...

Hi guys after the install of some upgrade i can t access to my SharePoint site and i recive this error
Method 'Upgrade' in type
'Microsoft.SharePoint.WorkflowServices.WorkflowServiceApplicationProxy' from
assembly 'Microsoft.SharePoint.WorkflowServices, Version=15.0.0.0,
Culture=neutral, PublicKeyToken=71e9bce111e9429c' does not have an
implementation.
Any idea?

Microsoft has started pushing security updates for SharePoint along with windows update. If you are using automated patching tool , then you should be aware of this. Same thing happened to me. Our automated tool pushed through patches for share point security
update that needed SP1 as pre-requisite and our environment didnt have that. So it broke everything in all farms, 5 farms broken all together. What you can do is try to install any new security update . This will restart all the process of patching and make
your farm accessible.
I opened up a support ticket with microsoft so August security update broke my farm so just to fix it i had to install may security update for the shake of restarting the whole prcoess. If fixed the farm. I eventually ended up installing SP1 any way
since security update introduces office 365 tab in central admin and it was broken due to lack of SP1.
hope this helps.
sachin

BPM error after transport

hi all,
i get the following error after transport on Q system:
"No object type found for this message; check the activation of the corresponding process"
the trace gives me this explanation:
"could not create BPE proxy for message, no XML object definition found for message 48C56A8CD7D615EEE10000000A9E014F"
In SXI_CACHE the business process has status zero, business process and everythng else in transport is active.
So what else can i do to fix that bug?
Thanks
Stefan

HI,
Then check the error log carefully. Problem might be some else. If not try to reimport the transport with the help of BASIS.
Also check the status of check table in quality. Is it active?
All ur objects are in single TR? If not the u have to move check table TR first and then later objects TR.
If nothing works then include all the objects in another TR and transport. make sure all are active.
Thanks,
Vinod.

BPM error after SP 14

Hi,
I have a strange problem. Since we upgrade to SP14 we have porblems with BPMs including a Message Switch like this example: SQLResponse./p1:MT_SQL_QUERY_response/StmName_response/row/VORGANGS_SCHLUESSEL = 300
on XI side everything works fine (test and activate) but on R3 side of XI (transaction SXI_CACHE) this BPMs result with error: 'VORGANGS_SCHLUESSEL' is not a component of data object 'PAYLOAD' - I have the similiar BPM on SP13 and it works fine...
Any idea or same problem?
THX Matt
--> I solve it on my own --> with SAP Note 890760
Message was edited by: Matthias Boettger

Hi Michal
The transport mechanisim is file import/export. We imported repository objects at namespace level and directory objects at scenario level. Just give some more input on this issue, before transport of all our objects (around 170) we did a sample tranport of only one interface object (both directory and repository objects)that worked perfectly.
Then we imported rest of all our objects and at this point we got cache refresh error in SXI_CACHE (communication error). We set the "No Timeout" option in the RFC destination INTEGRATION_DIRECTORY_HMI and all cache contents got re-freshed. After this we found only some BPM's are in status 0 but most of them in status 99.
I verified the container elements are present in my Dev BPM it is present and it works correctly. Hope this might give some clue on where the issue could be.
Regards
Prahllad

Kernel Power error after Win 7 and RAM upgrade

Hello,
I posted earlier on the subject of win7 and ram upgrades. I did both and it seemed to go fine. I did the ram first ... replaced a 667Mhz 1gb with a 800Mhz 2gb. A couple of days later the computer just shut itself down and restarted. Since then it has done it another 5 times, seemingly at random. Yesterday I decided to spend some time looking into it and found the 'event log'. All the shutdowns are recorded as 'critical'. A search on the web/here showed other occurences of the fault associated with drivers as much as anything.
After I did the win update I did update almost every driver with ones from this site.
Other than the shutdowns the only issues I have which are of very mild concern are the length of time the fingerprint reader takes to be present and that occasionally the cursor is unavailable for about a minute after logging on. When you try and control it it jumps about anywhere but where you want it to go. I rolled back the alps driver and that seems to have sorted the cursor issue.
So, details of the shutdown from the event log are as follows.
Log Name:      System
Source:        Microsoft-Windows-Kernel-Power
Date:          16/01/2011 16:21:31
Event ID:      41
Task Category: (63)
Level:         Critical
Keywords:      (2)
User:          SYSTEM
Computer:      (removed by me)
Description:
The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly."
There's more (I've shown it all below) but it's not that important. When I looked into it I found details of the problem on the microsoft knowledge base. Its described here http://support.microsoft.com/kb/2028504.
I believe I fit into scenario 3 for cause and resolution.
So, it seems that win7 and mixed speed ram may be a problem on some computers ... probably only a tiny number, but it looks like the HP3507 is one of them. I did see somewhere that I could down speed from 667 to 266 which might help with memory compatability but I can't see anywhere on the the insydeH20 bios where to do it. BIOS is version F18 .... upgraded from F15 as part of the Win7/RAM ugrade.
Before I swap back to the 'old' memory I'll see if anybody here can come up with any ideas. It may be that I have to sell off the expensive 2gb memory (ddr2 800mhz 200 pin) for £39.99 from maplin at a bargain price and get 2gb of 667Mhz from somewhere.
The full 'detail' regarding the fault is below.
Bye for now.
Phil
Log Name:      SystemSource:        Microsoft-Windows-Kernel-Power
Date:          16/01/2011 16:21:31
Event ID:      41
Task Category: (63)
Level:         Critical
Keywords:      (2)
User:          SYSTEM
Computer:      (removed by me)
Description:
The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly."
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-Kernel-Power" Guid="{331C3B3A-2005-44C2-AC5E-77220C37D6B4}" />
    <EventID>41</EventID>
    <Version>2</Version>
    <Level>1</Level>
    <Task>63</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8000000000000002</Keywords>
    <TimeCreated SystemTime="2011-01-16T16:21:31.187617000Z" />
    <EventRecordID>194889</EventRecordID>
    <Correlation />
    <Execution ProcessID="4" ThreadID="8" />
    <Channel>System</Channel>
    <Computer>Home_Laptop</Computer>
    <Security UserID="S-1-5-18" />
</System>
<EventData>
    <Data Name="BugcheckCode">0</Data>
    <Data Name="BugcheckParameter1">0x0</Data>
    <Data Name="BugcheckParameter2">0x0</Data>
    <Data Name="BugcheckParameter3">0x0</Data>
    <Data Name="BugcheckParameter4">0x0</Data>
    <Data Name="SleepInProgress">false</Data>
    <Data Name="PowerButtonTimestamp">0</Data>
</EventData>
</Event>

Hi DWeiland and Schwede,
Thanks for your replies. Yes I did the runtime engine registry change and also mass compiled the LV7.1 folder and my sourcecode. I still see the problem as I have set the LV adapter as Lv 7.1.1 runtime engine. Now I have changed it to LV7.1 development system. With this setting, it is not giving any error. Thus I don’t see any problem now. The older version of the code had the adapter as the runtime engine for some reason, now I have changed the setting to the development system. I hope that it shouldn’t be a problem.
Thanks again!
Thank you,
Sasi

BPM error After transports

Hi
We have trasported all our objects from Dev to QA, after a cache refresh in QA server we found that some BPM's are in state 0 and some are in status 99. There are no cache refresh error in SXI_CACHE "cache contents are up-to-date" and there are no errors when checked through SLD cache notifications.
The BPM's which are having status 99 giving following error
S     --- Translating step type 'RECEIVE' with ID '3' ---
E     No container definition available
S     --- Translating step type 'SWITCH' with ID '7' ---
E     Syntax error in expression Line1 Ext. ID64788F0009A411DAC1A5D943C2C9A7A9
E     The exception occurred (program: CL_SAI_SWF_RULE
E     Container element 'GEN_NRQ' does not exist
S     --- Translating step type 'TRANSFORM' with ID '5' ---
S     --- Translating step type 'SEND' with ID '17' ---
S     --- Translating step type 'SEND' with ID '24' ---
I     Language not set. Using system default E
All these BPM's are working fine in dev environments.
Any idea , inputs on how to resolve this.
Regards
Prahllad

Hi Michal
The transport mechanisim is file import/export. We imported repository objects at namespace level and directory objects at scenario level. Just give some more input on this issue, before transport of all our objects (around 170) we did a sample tranport of only one interface object (both directory and repository objects)that worked perfectly.
Then we imported rest of all our objects and at this point we got cache refresh error in SXI_CACHE (communication error). We set the "No Timeout" option in the RFC destination INTEGRATION_DIRECTORY_HMI and all cache contents got re-freshed. After this we found only some BPM's are in status 0 but most of them in status 99.
I verified the container elements are present in my Dev BPM it is present and it works correctly. Hope this might give some clue on where the issue could be.
Regards
Prahllad

-18002 error after Labview 7.1.1 upgrade

Hi All,
It seems like LV 7.1.1 upgrade is very dangerous when you use with Teststand. The existing system runs fine with LV 7.0 and TS 3.1. Now we have upgraded to LV 7.1.1. The LabVIEW adapter was set as LV 7.0 runtime engine previously. Now I could see only LV 7.0 and LV 7.1 even after I upgraded to LV 7.1.1. I have mass compiled my source code folder and also LV 7.1 folder. But I couldn’t see LV 7.1.1 listed in the runtime engine adapter list.
I could see some support link which explains about the registry changes (copying LV 7.1 (runtime) key to LV 7.1.1 (runtime)). After doing so, I could see LV 7.1.1 in the adapter list. But then it is of No use. As even if I select the LV 7.1.1 runtime engine as my adapter, it changes back to LV 7.1 run time engine (when I check the adapter option again). It gives error when we run with LV 7.1 runtime engine.
I have attached the sample error message!
Thank you,
Sasi

Hi DWeiland and Schwede,
Thanks for your replies. Yes I did the runtime engine registry change and also mass compiled the LV7.1 folder and my sourcecode. I still see the problem as I have set the LV adapter as Lv 7.1.1 runtime engine. Now I have changed it to LV7.1 development system. With this setting, it is not giving any error. Thus I don’t see any problem now. The older version of the code had the adapter as the runtime engine for some reason, now I have changed the setting to the development system. I hope that it shouldn’t be a problem.
Thanks again!
Thank you,
Sasi

Netflix Silverlight 2103 error after Firefox 3.6.15 upgrade, but IE remains fine, reinstall of Silverlight made no difference

Within the last week, Firefox automatically upgraded itself to v. 3.6.15. Netflix started reporting a Silverlight 2103 error. I followed the Netflix instructions to uninstall Silverlight, then let Netflix reinstall Silverlight, which it did according to the Netflix instructions. MSIE continues to be able to play Netflix instant-view movies, even after the uninstall/reinstall of Silverlight.
Did something break as of 3.6.15?
Netflix reports that this particular combo is not a known issue and they have opened a case based on my report. I wonder if other users are silently switching to a different browser without reporting it...?
Thanks for any ideas or solutions.

The Netflix supervisor I spoke to today finally confirmed that it is a known condition. But he said Netflix can't contact Mozilla, only Microsoft since Silverlight is Microsoft's product (even though it seems to be a Firefox change at issue, not Silverlight breakage).
The suggestion from Netflix is to switch to an earlier (and less secure) version of Firefox, or change browsers entirely to MSIE or Chrome. Please someone on the Firefox dev team check into this so Firefox doesn't lose market share to other browsers over this.

AveConnect driver error after SQL Server service pack upgrade

I am currently testing aveConnect 3.0 (connection optimized) for SQL Server 2000 on a machine we have here.We updated SQL Server with Service Pack 2 & 3 this morning and since then we've been getting the exception below.This is only since we added the service packs to SQL Server,before it worked fine.
java.sql.SQLException: [Avenir][JDBC SQL Server Driver] Connection refused: connect
I also tested it with the older version of AveConnect (2.2) which we've been using until recently,and it returned the same error.
I am currently testing aveConnect 3.0 for SQL Server 2000 on a machine we have here.We updated SQL Server with Service Pack 2 & 3 this morning and since then we've been getting the exception below.This is only since we added the service packs to SQL Server,before it worked fine.If anyonecould provide any advice I would be very grateful,as this is pretty urgent.

Hi,
I just contacted the driver vendor (Atinav Inc).heard that aveconnect jdbc driver is now updated to work with latest SQL server fixes from microsoft.
FYI, aveconnect jdbc driver link http://www.atinav.com/products/aveconnect/aveconnect.htm
HTH,
-ashraff.

HT5167 Error after 10.7.4 upgrade..."computer's local hostname ........is already in use on this network. The name has been changed to...... What to do now to get it back to status before 10.7.4 upgrade?

Error after 10.7.4 Lion Upgrade to iMac
Computer's local host name .......is already in use on this network. the name has been changed to........
and it keeps adding up the number each time I wake the iMac.
What to do to get it back before upgrade error?

Ok worth repeating, hope this works. Finally spoke to AppleCare Support and walked me thru following...restart computer holding down "command" and "option" keys at the same time with letters "P" and "R" when computer turns on. This is what he called a PR restart, clears out discrepancies in memory (if that is what the error message actually is). Then went to Systems Preferences/Network/Sharing and deleted the number that kept increasing every time MAC would wake up.
Even tho this was just done, I am hopeful that error pop-up won't happen again. Fingers crossed!

Error after update : "Method 'Upgrade' does not have an implementation"

Hello,
After installing the last Updates for my SharePoint Farm 2013, I ran into an issue. When I try to connect to the site, I get this error :
Method 'Upgrade' in type 'Microsoft.SharePoint.WorkflowServices.WorkflowServiceApplicationProxy'
from assembly 'Microsoft.SharePoint.WorkflowServices, Version=15.0.0.0, Culture=neutral,
PublicKeyToken=71e9bce111e9429c' does not have an implementation.
And there is a lot of strange behaviours within my farm. I cannot run a psconfig, the services FIMService
and FIMSynchronizationService cannot start, I can see the category "Office 365" in Central Administration but I have a SharePoint Server 2013, not online or any 365 thing... And I cannot uninstall previous SharePoint Updates...
Any idea ?
Thanks in advance for your answer.
Mike

Hi Mike,
If you are using SharePoint 2013 Server edition, please re-download the
SharePoint Server 2013 SP1(KB2880552) instead of SharePoint Foundation version, then install it on the server and check results again, here is another post with similar
issue you can take a look.
http://social.technet.microsoft.com/Forums/sharepoint/en-US/ee5c9cee-2b8c-473a-adc6-05d74aac9511/error-after-update-installation-method-method-upgrade-in-type-?forum=sharepointadmin
http://blogs.technet.com/b/stefan_gossner/archive/2014/04/22/sp1-for-sharepoint-2013-has-been-rereleased.aspx
http://thesharepointfarm.com/2014/05/ms14-022-known-issues/
Thanks
Daniel Yang
TechNet Community Support

IPod touch is not recognized by Windows (with a connect to iTune screen) after OS 5.1.1 upgrade and received an 1602 error

My iPod touch is not recognized by Windows 7 and will not appear on My Computer as a storage device after OS 5.1.1 upgrade and received an 1602 error. My iPod is now having a connect to iTune screen.

Error 1600, 1601, 1602: Try the following steps to resolve this error:
Ensure proper USB isolation troubleshooting has been performed, and test with a known-good cable.
Follow the steps listed for Error 1604.
This error may be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.
http://support.apple.com/kb/TS3694#error1602

Startup open ORA_12514 error after Shutdown, just upgraded 9i to 10g

Hi,
Noobe here, again! Cheers and happy New Year to all!
How should I edit script to start db that has been shutdown prior to backup?
We are having a problem with backups, failure is occurring executing SQL*Plus startup after shutdown. I successfully upgraded our 9i to 10g, 10.2.0.5.0 on Windows server 2003, 32-bit. We have a back_script.bat that runs all this, the only edits that I had to make within this were the names for the new Oracle services, but that is not a problem. When I run through the actions in the batch file, it fails at the sql>startup open; action, throws the error "ORA-12514 TNS:listener does not currently nkow of service requested in connect descriptor" What is different here between 9i and 10g that now this doesn't work? By commenting out the line calling our oracle_stop_start.sql I am getting successful >exp dumps, but there could be processes running 'cause I'm not stopping everything before proceeding with the export.
I have a complete image of the physical server running in a virtual that I am able to test on. Hopefully I'll not put too much info in here, but here is some background! Both the batch file and little stop_start script predate my involvement.
Here are the pertinent statements in our backup_script.bat:
SET NLS_LANG=AMERICAN_AMERICA.UTF8
SET ORACLE_SID=wind
net stop Windchill3_MethodServer (the third party application that uses the database wind)
sqlplus "system/manager@wind as sysdba" @D:\ptc\windchill\backups\oracle_stop_start
exp system/manager@wind owner=guest file=......\oracle_backup.dmp.....etc, etc, etc
Here is oracle_stop_start.sql
shutdown immediate;
startup open;
quit
As stated earlier, this has worked at least since 2007 when the last edits were made to the batch file. Now it fails at the sql>startup open; throwing the error ORA-12514. I can duplicate this executing each statement in a dos shell. The shutdown command closes, dismounts and shuts down the database. I have tried changing the startup statement to sql>STARTUP OPEN wind; but that makes no difference. I have found that if I exit sql*plus and log back in /nolog (in the same shell window) then I can restart the instance, what I do is:
sqlplus /nologsql>connect sys/* as sysdba;
sql>startup open wind;
This does successfully start the Oracle instance, mount and open the database. How else might I do this? I can certainly duplicate these actions, adding the necessary lines to oracle_start_stop.sql, but is there a better & cleaner way to do this? Right now I just want to make these existing scripts work. Once that is done, then I'm going to investigate and learn more about RMAN and datapump export/import and update our backup procedures.
Any thoughts & suggestions?
Thank you,
Tom

It might be a difference in behaviour between 9i and 10g. It looks like you are connecting through sql*net (sqlplus "system/manager@wind as sysdba), so the ORACLE_SID setting is not part of your connection. When the database is shutdown you are no longer connected to any database. When you issue the startup command the ORACLE_SID is not set so there is no service specified.
If you are running this on the database server, try setting the ORACLE_SID then running your script like:
{code}sqlplus "system/manager as sysdba" @D:\ptc\windchill\backups\oracle_stop_start{code}
and you should still have the service set for your connection.
John

Strange Data Mapping Errors after SEM 6 Upgrade. Please assist.

Hi All, I encountered these sudden Mapping errors after I tried to do Testing in Post Upgrade Sand Box. Here I am trying to to perform Collected Reported Financial Data under Data Collection Method for a particular Company Code 3040. Kindly help me with some quick responses as this is kind of high priority. The errors and the Diagnosis Notes I am unable to follow as I do not where I shall write those Mapping Rules they are referring to. I do not even know if that need to apply any SAP Notes as such. Once again Highly appreciate your quick response and Many Thanks in Advance.
Regards, BIP
Input conversion for field Period Value LC has invalid format Message no. UCT8210 Diagnosis The mapping rule for target field Period Value LC contains a move with a selected Input Conversion indicator. Therefore, the system performs an input conversion prior to creating the target data. However, an error in the input conversion occurred while moving the source key figure to the target key figure Period Value LC. This means that the format used for the input conversion is incompatible with the target data. System Response The system will not perform the move. Procedure Examine the mapping rule for field Period Value LC. Either select the Conversion Exit indicator or deselect the Input Conversion indicator. Execute the method again. -
3040 is incompatible with input format for field /1FB/COMPANY Message no. UCT8258 Diagnosis During execution, the method derives the source selection for source field /1FB/COMPANY from the mapping rule for the target field. 3040 is one of the values that were derived for the source selection. The system requires that this value is in the correct SAP-internal format because the Conversion Exit indicator has been selected in the move operator for field /1FB/COMPANY. However, the value 3040 is incompatible with the SAP-internal format. System Response The system attempts to interpret value 3040 as an external format and convert it to the internal format. If this fails, the system is unable to restrict the source selection using source field /1FB/COMPANY. In this case, the system may read more source data than was originally intended, which can affect performance. Procedure In the log, choose the Source button to display the source selections that are used to read the source data. When this appears, examine values selected for field /1FB/COMPANY. If the correct values were selected, you can ignore this message. To prevent this message from being issued, you can select the indicator in the mapping rule used by source field /1FB/COMPANY. If incorrect values were selected, make sure that the mapping rule used by source field /1FB/COMPANY has been defined correctly. If the mapping rule is correct and value (3040) derived for the source selection does not affect the overall result, you can ignore this message. If the source selection does not contain the value 3040 for field /1FB/COMPANY and, because of this, source data that is supposed to be read is not being read, make sure that the mapping rule has been defined correctly. If the source selection does not contain any value for field /1FB/COMPANY, make an estimation as to how much excess source data is being read and whether this might affect system performance. If you do not expect any performance problems, you can ignore this message. In any event, you have the following alternatives if the mapping rule is defined correctly, but the source selection on field /1FB/COMPANY is unsatisfactory: You can define a source selection for field /1FB/COMPANY in the Customizing settings for the method on the Selection tab page. Then the method uses this source selection instead of the source selection derived from inverse interpretation of the mapping rule. You can implement the Business Add-In (BAdI) UC_DATATRANSFER and use the method INVERT to determine the source selection on field /1FB/COMPANY. Then the method uses the result of the INVERT method for the source selection instead of the source selection derived from inverse interpretation of the mapping rule. -
Cannot derive the source selection from target field Version Message no. UCT8252 Diagnosis Field Version has one of the following roles: Consolidation unit Group currency key Fiscal year Posting period Version To delimit the volume of the source data to be read, the system usually derives the source selection from the target selection of such a field. However, the system cannot derive a source selection from field Version. System Response It is possible that a greater volume of source data is being read than is necessary. This can lead to performance issues. Procedure Check whether a mapping rule is defined for field Version. If a mapping rule is defined, you can disregard this warning message. However, if you discover after method execution that the system did not process a large amount of data, and that system performance was not satisfactory, you may want to examine the source selection by choosing the Source button in the log. If the reason for the disregarded data is that too much source data was read because of the unrestricted selection on the source field (which is linked with target field Versionthrough mapping), choose one of the alternatives below: Change the mapping rule for field Version so that the system can derive a delimiting source selection. Implement the Business Add-In (BAdI) UC_DATATRANSFER with the method INVERT to delimit the selection for the source field that is linked via mapping to the target field Version. -
Cannot derive the source selection from target field Group Currency Message no. UCT8252 Diagnosis Field Group Currency has one of the following roles: Consolidation unit Group currency key Fiscal year Posting period Version To delimit the volume of the source data to be read, the system usually derives the source selection from the target selection of such a field. However, the system cannot derive a source selection from field Group Currency. System Response It is possible that a greater volume of source data is being read than is necessary. This can lead to performance issues. Procedure Check whether a mapping rule is defined for field Group Currency. If a mapping rule is defined, you can disregard this warning message. However, if you discover after method execution that the system did not process a large amount of data, and that system performance was not satisfactory, you may want to examine the source selection by choosing the Source button in the log. If the reason for the disregarded data is that too much source data was read because of the unrestricted selection on the source field (which is linked with target field Group Currency through mapping), choose one of the alternatives below: Change the mapping rule for field Group Currency so that the system can derive a delimiting source selection. Implement the Business Add-In (BAdI) UC_DATATRANSFER with the method INVERT to delimit the selection for the source field that is linked via mapping to the target field Group Currency
1 is incompatible with input format for field FISCPERIOD Message no. UCT8258 Diagnosis During execution, the method derives the source selection for source field FISCPERIOD from the mapping rule for the target field. 1 is one of the values that were derived for the source selection. The system requires that this value is in the correct SAP-internal format because the Conversion Exit indicator has been selected in the move operator for field FISCPERIOD. However, the value 1 is incompatible with the SAP-internal format. System Response The system attempts to interpret value 1 as an external format and convert it to the internal format. If this fails, the system is unable to restrict the source selection using source field FISCPERIOD. In this case, the system may read more source data than was originally intended, which can affect performance. Procedure In the log, choose the Source button to display the source selections that are used to read the source data. When this appears, examine values selected for field FISCPERIOD. If the correct values were selected, you can ignore this message. To prevent this message from being issued, you can select the indicator in the mapping rule used by source field FISCPERIOD. If incorrect values were selected, make sure that the mapping rule used by source field FISCPERIOD has been defined correctly. If the mapping rule is correct and value (1) derived for the source selection does not affect the overall result, you can ignore this message. If the source selection does not contain the value 1 for field FISCPERIOD and, because of this, source data that is supposed to be read is not being read, make sure that the mapping rule has been defined correctly. If the source selection does not contain any value for field FISCPERIOD, make an estimation as to how much excess source data is being read and whether this might affect system performance. If you do not expect any performance problems, you can ignore this message. In any event, you have the following alternatives if the mapping rule is defined correctly, but the source selection on field FISCPERIOD is unsatisfactory: You can define a source selection for field FISCPERIOD in the Customizing settings for the method on the Selection tab page. Then the method uses this source selection instead of the source selection derived from inverse interpretation of the mapping rule. You can implement the Business Add-In (BAdI) UC_DATATRANSFER and use the method INVERT to determine the source selection on field FISCPERIOD. Then the method uses the result of the INVERT method for the source selection instead of the source selection derived from inverse interpretation of the mapping rule
Input must be in the format ___,___,__~ Message no. 00088 Diagnosis Your entry does not match the specified input format. System Response The entry in this field was rejected. Procedure The entry must comply with the edit format. The following edit format characters have a special meaning: "_" (underscore) There should be an input character at this point; this should be a number for numeric fields. "." (decimal point) (applies to numeric fields) The decimal point occurs here (setting in the user master record). "," (thousands separator) (applies to numeric fields) This separator occurs (optionally) for more than three figures. Depending on the setting in the user master record, it can be a period or a comma. "V" (applies to numeric fields) The operational sign appears here. If used, it must by at the right margin of the field. The sign is either "-" or " "(space). "~" (tilde) (applies to numeric fields) As of and including this character, leading zeros must also be entered. Otherwise, this character has the same meaning as an underscore. Leading zeros need not be entered on the left of the tilde. They are not output at this position. All other characters have their normal meanings and must be entered in the same position as in the edit format.

Hi Dan,
Could you Kiindly advise me where we need to write the Mapping Rules in Consolidation Monitor? All he time the errors refering to Mapping Rules. The only Tab I seen "Mapping" is in Data Basis But as per my Understanding Iwe do not have much to do there as it is system generated Mapping Tab.
Where we actually go and select/deselct those Input Conversion Indicator/ Conversion exit Indicator.
Highly appreciate your advise.
Thanks and Regards,
BIP

Time machine fails backing up with a "backup disk not found" error after upgrade to Lion 10.7.2

Time machine fails backing up with a "backup disk not found" error after upgrade to Lion 10.7.2. I've erased and reformatted the drive; reconnected Time Machine(it saw it) and began a new backup. The backup starts again but fails before completing with backup drive not found error. I used the 10.7.2 combo update. Any help on how to fix this problem would be appreciated.

Arghhhhhhhhhhhhhhhhhhh!!!!!!
After waiting since October for a fix, I have now upgraded the firmware on the Time Capsule and installed the new Airport Utility, released yesterday, and the situation is even worse.
Up until now, the Airport Utility had an option to disconnect all drives manually and the Time Capsule would then work until the next reboot – a temporary (?) work-around.
Now that option does not exist in the new-look Airport Utility. And the Airport Utility installation can’t be rolled back and the old utility won’t restore.
The sparesbundle is still not accessible. Anyone worked out a work-around in the new environment yet?
I have another Time Machine backup working fine to a trusty old Lacie Drive so erased the one on my Time Capsule to see if that works. I have renamed the Capsule and the Time Capsule Drive. But to build another full backup will take at least two days and I shall be away from tomorrow and am reluctant to leave the Capsule and computer up and running for a week. And I’ll bet the sparsbundle will still be nowhere to be found.
How can Apple screw up so badly when they are to become the richest company in the entire world and – soon – will have more cash in the bank than the entire United States? Can’t they afford someone who really can sort this out? Especially when a Firewire connected hard drive – my trusty and simple LaCie – works fine.
Words, almost, fail me.

BPM error after PI 7.31 SP12 upgrade

Similar Messages

Maybe you are looking for