BPM Error Permanent Error in BPE inbound processing

Hi
I require some urgent help on this BPM issue.
We are trying to integrate SRM PO being directly sent to Vendors using HTTP. We are getting an error saying Permanent Error in BPE inbound processing. The scenario works like this.
SRM system would sent PO using the SRM Standard interface PurchaseOrderRequest_Out. We need to transform the message into cXML format and send it to the vendors using HTTP adapter. Using the HTTP response we need to trigger an email to the business process team.
The SRM interface is under the software component SAP SRM Server 5.5 and our mapping is being done in a common software component and for the vendor interface we have another software component. We have created a relationship in the SLD by making the common SWC as dependent software component to SAP SRM Server and Vendor Software Component. So in the integration repository we are able to get the interfaces for the SAP SRM Server and Vendor Software Component under the common software component. The receive step for this BPM is a copy of the standard SRM interface PurchaseOrderRequest_Out(as the standard interface is an asynchronous interface) and we would require an abstract interface for the BPM. We have checked the semantics for the BPM and its fine. The related ID development is in place. When the message is being triggered, it gives us this above mentioned error. When we go to the QRFC monitor we are able to check the details.
Regards,
Indranil

Hi Indranil,
     You don't see you BPM....
First go to SXI_CACHE and check that your BPM is listed there and that the compilation has been completed succesfully.
Is this the first time the BPM is being used? If so check if has been configured. For example, go to RWB->Component Monitoring->BPE in <SYSID>
and check if any error is listed there.
In order to check what is going on in your BPM you can trace it:
                  SXMB_MONI_BPE->Diagnosis Processes with Errors
                  SXMB_MONI->Process, get your msg and click on 'PE'. You should see the workitems and see if there is any error.
         Hope this helps you....
         Regards,
            Encinas.

Similar Messages

Permanent error in BPE inbound processing for BPM Mesg Split

Hi Friends,
i have done the below scenario. i had done everything what theys mentioned in the blog but i am getting the error in smq2 as "Permanent error in BPE inbound processing" sysfail please helpme on this issue.
Illustration of Multi-Mapping and Message Split using BPM in SAP Exchange Infrastructure

Hi Uday,
Please check this blog for your error, This is really interesting. Permanent solution for your question.
Delivery Modes in BPM.
Thanks!

BPM workflow "In Process"-Queue "Permanent error in BPE inbound processing"

Hi All,
I am trying to collect messages from 2 different interfaces into BPM( Integration Process).
when I checked in sxmb_moni , i found the error on outbound status & BPM workflow has stuck with status "In Process".
it is not showing any error in Workflow, how to solve the issue.
due to the above error, other messages are stuck in Queue stating "Permanent error in BPE inbound processing".
Please help.
-Jyoti

Hi Jyoti,
Goto T.Code swwl, in that clear all fields and choose from date as 1 month ago and try to execute. Then, delete all entries there. And re-execute your scenario.
In this case, please see SAP Note 1126656.
Please see the below blog, it might be helpful to you.
/people/henrike.kaiser/blog/2009/02/03/how-to-analyze-stopped-queues-in-xi-ccbpm
Regards,
Rajesh

BPM: Permanent error in BPE inbound processing

Hi guys...
i am having a problem in my scenario which is involving BPM.
The problem is when i execute the interface it is showing green flag aginst PE in sxmb_moni and in smq2 one queue is showing with sysfail and BPM: Permanent error in BPE inbound processing error.
yes..i searched on SDN and found resources like Note number 1126656
i checked al the steps which were earlier mentioned posts like:
SWWL: there are no entries existing
SMQ2: cleared the queues ,regenerated but still no luck.
My undertsanding is no work is being generated at all .
I checked BPM with F7 : its correct no errors
BPM has return code of 0 in sxi_cache
In ID BPM is latest and refreshed.
Is there any way i can overcome this problem.
Your inputs will be of real help.
Thanks in advance.
Regards,
Kiran.

My undertsanding is no work is being generated at all .
If you are getting the error for Source ---> BPM flow then there is a possibility that the ID objects (RD, Interface determination) are to be blamed.
1) Recreate these particular ID objects/ make some dummy changes
2) Activate and ensure that Cache is refreshed
3) Delete the entry in the queue (or delete the queue)....do this only if the XI system is not of Quality, production
4) some times the BPM cannot be triggered from sending a test message from RWB .... so make a testing from the source application .... this particular case has heppened to me and hence suggesting to you.
Regards,
Abhishek.

IDoc to Soap, with BPM - Permanent error in BPE inbound processing

Hi Experts,
IDoc to Soap, with BPM - > Permanent error in BPE inbound processing
How to rectify this any issue???
Thanks-
sk

Hi,
The inbound processing encountered a permanent error and the queue therefore stopped.
The error message "Permanent error in BPE inbound processing" may be caused by the following:
- At the start or when you process a process instance, the inbound processing encounters an exception that was not handled. This exception is triggered, for example, by a transformation step, a synchronous send step or a control step but it was not caught in an exception handler branch. If the exception that was not handled occurs in the first transaction of the started process instance, the system does not write the process instance to the database but it sets the queue that has this error message to the error status.
Refer to the help in Note 1082099
- The inbound processing triggers this error if the correlation evaluation shows that a message should be delivered to a process instance that has the status "error". Since delivery to process instances that contain errors is not permitted, the queue is stopped.
Use the simulation of the message delivery in the detail view of the relevant queue LUW to determine the relevant process instance for the affected message and use transaction SXMB_MONI_BPE "Continue Process Following Error" (or transaction SWF_XI_SWPR) to continue. If you cannot continue the process instance, check whether you can logically delete the instance. In this case, use the method that is described in Note 807906 to logically delete a process instance.
Check whether your system contains other process instances that have errors in order to detect similar problems. Use transaction SXMB_MONI_BPE "Continue Process Following Error" or transaction SWF_XI_SWPR.
Use the report RSWF_CRL_MAINTAIN to check all of the correlation instances in question or the relevant process instances that you can reach using "Display Work Item".
- Messages that cannot be delivered because no correlation instance can be found may lead to the error that is mentioned here. Check whether the causes that are outlined in Note 1094028 affect your case.
Hope this will help you.
Regards
Aashish Sinha
PS : reward points if helpful.

Permanent error in BPE inbound processing

Hi all,
We have recently migrated are XI scenarios to a new server.
In one of the file to rfc scenario whenver a file is processed i get the error in smq2: Permanent error in BPE inbound processing.
The chances of BPM and mapping error are less as the BPM is working live in another server.
What could be the other problems.
REgards
Edited by: Vinithra Iyangar on Feb 26, 2009 10:36 AM

Dear Vinithra,
Its highly improbable for this error to occur because of transports going wrong. There is one more case which i am sure is the cause why you are getting this error.
"This behavior is when we place the files in the respective folders both the files are picked up by the file adapter. Process instance is generated for BPM. First receive step is encountered and the file is received by it. But due to the wait step the second receive step is not open and hence the second file cannot be delivered to it. Unlike the first case, in this case as the buffering is deactivated the file is not buffered and hence the inbound processing of BPM fails for the second receive step."
Please check if something like this is happening.
Refer : /people/milan.thaker/blog/2008/07/04/delivery-modes-in-bpm
Rgds
joel

Permanent error in BPE inbound processing error

Hi guys...
i am having a problem in my scenario which is involving BPM.
The problem is when i execute the interface it is showing green flag aginst PE in sxmb_moni and in smq2 one queue is showing with sysfail and BPM: Permanent error in BPE inbound processing error.
yes..i searched on SDN and found resources like Note number 1126656
i checked al the steps which were earlier mentioned posts like:
SWWL: there are no entries existing
SMQ2: cleared the queues ,regenerated but still no luck.
My undertsanding is no work is being generated at all .
I checked BPM with F7 : its correct no errors
BPM has return code of 0 in sxi_cache
In ID BPM is latest and refreshed.
Is there any way i can overcome this problem.
Your inputs will be of real help.
Thanks in advance.
Regards,
Seshagiri.

Hi Praveen,
If the BPM goes in error due to "The incoming payload structure is incorrect (not matching message type structure of abstract interface)" , is there any work around?
Currently in my scenario BPM goes into error due to incorrect structure , error show up in SMQ2 . And the subsequent message also get stuck. What I have to do is to delete the queue in error and reactivate the queue manually.
Is there any way we can avoid this situation.
Thanks,
Pankaj

Error : Pre Settings for IDoc inbound processing are missing error

Hi Experts,
There is a CRM job which executes LSMW and I am facing a strange problem during the IDOC posting the error "Pre Settings for IDoc inbound processing are missing error". Can anyone please tell me how to correct this error?
Thanks in advance.
Madhurima.

I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
[iTunes for Windows: "Registry settings" warning when opening iTunes|http://support.apple.com/kb/TS3299]

BPM error "Permanent error in BPE inbound processing " for 1.3 MB file ?

Hi
I have scenario that using ccBPM (file -
> IDOC). this scenario is working fine for small file but it will error stuck at SMQ2 Queue for big file around 1.3 MB.
I think 1.3 MB file is no that big file, why ccBPM cannot handle this transaction, Please advise
Thank you and Best Regards
Fernand

Hi Fernad,
Check the detail error in workflow engine.
There is a possibility that error is in data and hence mapping step must be throwing the error.
-Supriya.

Auto delete sysfail (Permanent error in BPE inbound processing)

Hi,
We have a few BPE processes that get stuck in the queues for various reasons. Since these are only sent EOIO, they will be stuck in the queue. We would like to be able to delete these automatically and reactivate/unlock the queue so these errors can be fixed the next business day. We are monitoring the queue and receive a page when it gets stuck, but this requires manual intervention. We really would like a way to handle this automatically.
Any suggestions will be greatly appreciated.
Best Regards,
Rick

Hi Rick,
This scenario could to fixed using Archive/Delete functionality. If all corresponding jobs are successfully running, then i would suggest to go through below SAP notes
1042379 "BPE-HT: Deleting messages that are no longer used" (each step of the description has to be executed)
Also you should implement the following notes
1147377 "BPE-RUN: Messages not picked up by reorganisation"
1157044 "BPE-RUN: All message proxies set as deletable"
1421003 "BPE-RUN: Synchronous message proxies cannot be deleted"
You may refer to below SAP link that helps in checking if you have setup all required periodic jobs
http://help.sap.com/saphelp_nwpi71/helpdata/EN/cd/20bc3ff6beeb0ce10000000a114084/frameset.htm
Regards
Sekhar

IDOC Error handling using workflow for Inbound process.

I have a custom idoc which I am processing using a custom inbound function module with the help of a custom process code. I have made the config in BD51/bd67/We42/We57and doing the coding in the inbound function module to handle workflow. But i am still unable to get the workflow item in my inbox. I have set my userid in the partner profile as the agent to receieve the workflow.
Is there any other config that needs to be done vis-a-vis workflow ? like..assignement of some standard task,etc etc ? The message type I am using for the IDoc is zWMMBXY .
Pls advice..thanks

Seetha,
I have this already..
IDOCPACKET
Object type                         IDPKWMMBXY
End event                           MASSINPUTFINISHED
IDOC
Object type                         IDOCWMMBXY
Start event                         INPUTERROROCCURRED
End event                           INPUTFINISHED
Application object
Object type                         BUS2017
Start event

Permanant Error in Inbound Processing in BPM

Hi All,
i have done a File1->JDBC(Synch)->File2 scenario using BPM.
It works fine when i have data in input file ie File1. However when my input file empty my scenario shows green flag in "OutboundStatus" and in queue gives error "Permanant error in Inbound Processing". When i tried to see the error in details got exception in START_PROCESS....
After deleting this entry from queue and sending file with data it works fine.....
I just want to know why it happens....? My input file can be empty as i am using it for triggering the scenario.
Do i need to do any settings in BPM or scenario to handle this?
Thanks,
Atul

hi atul,
in the rec step where u set the start process check box, you give the message. it is this message that is used to start the BPM process and not ur input file... the input file is used to trigger ur scenario not ur process. therefore u have exception in 'start process'.
hope it helps.
regards,
latika.

Permenant error in bpm inbound processing error in inbound queue of pi7.1

Hi Experts,
In E filling scenario in SAPPI7.1, iam facing a problem. i.e In sxmb_moni message monitoring, the message was schedule at outbound side.when i extend that, the message was stuck in smq2 with "permenant error in bpm inbound processing".can any one please tell me how to relove this issue.
Thanks & Regards,
Giri.

Hello
Check the note #1126656 BPE-TS: Permanent errors in the BPE inbound processing. This describes some possible causes and solutions for this error.
Regards
Mark

Permanent error in BPE

Hi
When I trigger messages using BPM, the sxmb_moni shows chequered flag for all the three sender files. BPM has to merge it. When I click on PE, it goes to queues and the queues are in " SYSFAIL ', with an error messsage " Permanent error in BPE inbound processing ".
How do I find out why BPM is not triggering ?
Harish

Hi
Go to SXMB_Moni_BPE or click on the redflag at the outbound side in sxmb_moni . after going there you wwill have a work flow view where in you will come to know which step has error say mapping or fork ..
Go to transaction SWWL delete your process work item which is in error state . and then re run the scenario.
Let me know if this helps .
Regards
Ninad

RFC_ERROR_SYSTEM_FAILURE during inbound processing

Hi,
I am getting below error while using startrfc for inbound processing.
RFC Call/Exception: SYSTEM_FAILURE
Group       Error group 104
Key         RFC_ERROR_SYSTEM_FAILURE
Message     Port 'SAPCC4' does not exist in the table of port descriptions
I already have port SAPCC4 defined in my SAP system.
Please help.
Thanks & Regards,

HI ,
go to Idoc -number which is error generated..
see the control record..in EDIDC table..
see the Partner and go to we20 and see the partner and open inbound and see the message and open
details..
see whether the same port assigned to the Message type or ,,,if not assign..
if the port is TCP/IP or R/3 connection..go to t-code sm58 and see the error details for the RFC
destination assigned in the port..
Prabhudas

BPM Error Permanent Error in BPE inbound processing

Similar Messages

Maybe you are looking for