BPM Error:Runtime handle of object type could not be created:CX_MERGE_SPLIT
HI Guys...
I am working on a RFC to HTTP scenario:
It is a standard SAP interface ....so we created only ID objects..obviously the BPM delivered by must be correct.
in sxmb_moni_bpe it is throwing th following error texts:
Runtime handle of object type could not be created
Error executing service for node
Exception CX_MERGE_SPLIT occured
component mapping has returned an error
unmodeled exception when executing service for node
No payload found
object FLOWITEM method EXECUTE cannot be executed
I tested the mapping payload from sxmb_moni in IR and it is working fine.
Receiver is an HTTP so could not able to find exactly whats happening as no thrid party tools can be installed....struck up here.
Any iputs will be of help in this area.
Thanx in adavance.
Kiran
any inputs around this plz??
Similar Messages
-
IDoc failed with the error massaeg "Instance of object type could not be ch
Hi All
I am getting IDoc failed with the error massaeg "Instance of object type could not be changed"
Message type :PORDCR
Basic type : PORDCR05
Message no. BAPI003
Status : 51
All POs are get uploaded in SAP during Cut over activities only.
Please suggest on this.It will be a great help.
Thanks
AjitHi
After uploading POs into SAP we are changing quantity and value in PO in Legacy system, and for this all IDocs are failed, subsequently these changes are not triggering to ECC.
Please help
Thanks
Ajit -
IDoc Error -Instance of object type could not be changed
Hi All
I am getting IDoc failed with the error massaeg "Instance of object type could not be changed"
Message type :PORDCR
Basic type : PORDCR05
Message no. BAPI003
Status : 51
Please suggest on this
Thanks
AjitHi Madhu
All these POs are uploaded during the Cutover Activities only, I am not sure whether it is uploaded through LSMW or not. What I guess is If its uploaded thrugh LSMW , then we can't change any value in the PO.
Please sugest how can I process allthese IDocs.
Thanks
Ajit -
Error: Object type '' could not be generated when creating sales order
Hello Friends,
I am using a SAP standard ITS service to create sales order.
When I am creatin SO, it gives me error Object type '' could not be generated.
Can you plz suggest me what is that issue & how I can reslove it.
Regards,
Narendraany inputs around this plz??
-
Error message "The backup disk image could not be created." I have tried everything I have found online in the community from TM full reset to changing my computers name. Anything else I can try? I am using a Seagate external HD with a connection through my router. I spent an hour on the phone with seagate and everything is ok on the HD end.
TM sees it and it is mounted but cannot go any further. HELP?!!!!
Thanks
-AHow should it be connected? It has a usb port and ethernet. The USB on the ExHD looks like the port on the back of my computer, so I would need one wth the same ends? Do they make those?
I can usually fix most my comp problems myself, but this new ExHD has stumped me.
Thanks for your help.
-A -
Training & Event Management Course type ** could not be created Message no. LSO033
Dear Gurus;
I'm trying to record a Business Event Group through S_AHR_61011889 - Business Event Group , then a Business Event Type through S_AHR_61011888 - Business Event Type.
Actually when I'm recording the data of the Business Event Type then I save i get a message stating
Course type **** could not be created
Message no. LSO033
to be able to save the event type I have just to record its name and the capacity then after saving I have to select change "F6" and record each data infotype separately, something which is not logical for the users.
Even when they make change and record the remaining Infotypes like the description then they select display what they've recorded doesn't come
Does anyone know how can I fix this?
Thanks in advance.
Best Regards;
LobnaDear,
Looks like has issue in authorization access, verify and fix it.
Regards,
TG -
I am using a WD My Passport Studio external hard drive as a Time Machine. I get the error that a back up folder could not be created when my iMac has been asleep, any advice. The hard drive is set set not to go to sleep.
Were you not plugged in via USB to begin with?
I would recommend performing some resets just to be on the safe side. Unplug the external HD, and try these steps:
http://support.apple.com/kb/HT3964
http://support.apple.com/kb/HT1379 -
Time Machine error message: The backup disk image could not be created
I got a new MacBook the other weekend and Time Capsule. I have set up the time capsule, its light is green, it shows up as a device in my finder window and the printer it shares is accessible.
The problem is when I try to run time machine I get the error message "the backup disk image could not be created" I have the time capsule selected as the drive I want to back up to. I have read through all 150 help topics on the Mac Support page regarding time machine and am now turning to you the community to help!I found an answer in another place on this forum...http://discussions.apple.com/thread.jspa?threadID=1422065&tstart=330
Just have to give my computer a name under system preferences/sharing -
Error: No instance of object type PurchaseOrder has been created.
Hi:
I am using BAPI_PO_CREATE1 to create PO's using webdynpro. I get the following error message when I attempt to create a PO.
No instance of object type PurchaseOrder has been created. External reference:
Please help.
Thanks
SriramRamki:
Yes, I did. The initialization code is as follows
Bapi_Po_Create1_Input input = new Bapi_Po_Create1_Input();
input.setPoheader(new Bapimepoheader());
input.setPoheaderx(new Bapimepoheaderx());
input.addPoitem(new Bapimepoitem());
input.addPoitemx(new Bapimepoitemx());
input.addPoaccount(new Bapimepoaccount());
input.addPoaccountx(new Bapimepoaccountx());
input.addPoschedule(new Bapimeposchedule());
input.addPoschedulex(new Bapimeposchedulx());
input.addPotextheader(new Bapimepotextheader());
Thanks
Sriram -
I just set up a new time capsule. it worked fine on my first macbook. But now I cannot backup my second macbook. Getting "Time Machine Error" "The backup disk image could not be created." Do I need to change settings on my time capsule to allow the second computer, or do I need to change something on the computer to allow time machine to work right?
Try #C9 in Pondini's Time Machine Troublshooting
http://pondini.org/TM/Troubleshooting.html -
Can anyone help with the above situation??
There are a number of things that cause the problem.
http://pondini.org/TM/C17.html
Usually if you go to disk page in manual setup of the airport utility (5.6 of course as 6 is a toy), disconnect all users and it will then work ok again.
The issue is Lion (maybe contributed to by the 7.6 and later firmware). -
ORA-39083: Object type TRIGGER failed to create with error:
i m getting these two error when i import data using impdp.
ORA-39083: Object type TRIGGER failed to create with error:
ORA-00942: table or view does not exist
i have exported (expdp) data from production db, when i importing (impdp) the dump file to the test db i m geting the above two errors.
example:
ORA-39083: Object type TRIGGER failed to create with error:
ORA-00942: table or view does not exist
Failing sql is:
CREATE TRIGGER "NEEDLE"."CC_BCK_TRG" BEFORE INSERT OR UPDATE
ON NIIL.cc_bck_mgmt REFERENCING NEW AS NEW OLD AS OLD FOR EACH ROW
DECLARE
w_date DATE;
w_user VARCHAR2(10);
BEGIN
SELECT USER,SYSDATE INTO w_user,w_date FROM DUAL;
IF INSERTING THEN
:NEW.cretuser :=w_user;
:NEW.cretdate :=w_date;
END IF;
IF UPDATING THEN
:NEW.modiuser :=w_user;
:NEW.modidate :=w_date;
END IF;
END;
status of the above trigger in pro db is valid. and source table also exist even though i m getting error when i import
please suggest me...perhaps you don't have table... (impdp created trigger before create table)
check about "NIIL.cc_bck_mgmt" table.
and then create it (trigger) manual ;)
Good Luck. -
I have a Windows 7 Ultimate .iso file saved onto a "Mac OS Extended (Journal)" formatted USB flash drive. I am trying to install it with BootCamp Assistant and I keep getting the error message : Your bootable USB drive could not be created. "An error occurred while formatting the disk."
I have previously installed Windows 7 on my Mac (and it worked flawlessly - same .iso file), but I uninstalled it because I didn't partition enough space on my hard drive. I have used several flash drive to try and install and none have worked.
Some help would be greatly appreciated.The Boot Camp forum is located here: https://discussions.apple.com/community/windows_software/boot_camp
The Boot Camp Guides are located here: http://www.apple.com/support/bootcamp/ -
Archive's list of contents could not be created
Just started having this problem today after running OS updates.
When I select a folder and create archive (file menu and contextual menu) I receive this error: "Archive's list of contents could not be created" and the zip archive fails to be created.
Tested empty folders, folders with various files, etc. and searched for answers here but couldn't find any similar posts.
Any help would be most welcome.
G5 Mac OS X (10.4.8)Repair permissions with Disk Utility, restart, and see if the problem persists. If so, create another admin user account, log into it, and try to make an archive.
-
Time Capsule - "Backup disk image could not be created"
Trying to set up time machine and consistently getting this error message. I can login in to the device and see the drive and space quantity with the airport utility. Airport wireless network is working fine - just can't get past this error message when I initiate the time machine backup process. Ideas? mike
Mike,
"The Backup Disk Image Could Not Be Created"
Here are a couple possible reasons for the error message, “The Backup Disk Image Could Not Be Created”:
*Missing Computer Name*
First you might be missing a computer name in the Sharing Preference pane. Go into System Prefs. Then Sharing. In the box labeled “Computer Name” is it empty? If it is blank, you need to put in a name for your computer. Otherwise Time Machine won’t be able to link this Mac with the previous backups.
*Reselect Time Machine Backup*
Next, the link to the network drive “Backup” has been lost. Go into System Preferences --> Time Machine --> “Change Disk…” and select the the backup drive again from the list of available volumes. Do this:
Go to System Preferences --> Time Machine.
Click the "Change Disk..." button.
Select "None" and click "Stop Backing Up".
Now click "Choose Backup Disk" and reselect your drive again.
Close System Preferences and try backing-up again.
Let us know if any of the above resolved your issue.
Cheers!
Message was edited by: Glenn Carter
Maybe you are looking for
-
We have installed a new PI 7.1 system and at he moment I have the problem that I can't login into the IB tools. I found a lot of threads with this problem but I can't find a solution for my specific problem. Have a look at the well known error log: c
-
Sapinst taking long time to load
Hello experts, we are installing sapnw730 PI. we have noticed that the SAPinst taking long time to load ( near about 45 mins) for every time. Once sapinst starts we dont find any slowness during the installation and the system behaves quite normal. O
-
ERS generated document with zero value for SES
Hi, I have maintained service entry sheet. Accounting entry is generated. When I run T code MRRL, it has generated document with zero value. This is not a free goods PO. Why this is happening? Please guide on this issue. Regards, Piyush
-
Running 2 different displays on the same Mac Pro2x 2.66
Hi folks. this is the graphics card that I have:- Chipset Model: NVIDIA GeForce 7300 GT Type: Display Bus: PCIe Slot: Slot-1 PCIe Lane Width: x16 VRAM (Total): 256 MB Vendor: NVIDIA (0x10de) Device ID: 0x0393 Revision ID: 0x00a1 ROM Revision: 3008 I
-
I must find my find my iphone data for last 1 year please help me
i must find my find my iphone data for last 1 year please help me