BPM : Message interface is not used by this process

Hi,
In BPM : to pass the message facing error as below.
Messages not reflecting in BPM monitor.
I have configured Recveiver - transformation - sender in BPM.
In recvier in BPM is configured with Abstract Type as same in the message mapping.
Is there any thing i am missing?
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!--  Call Adapter
  -->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
  <SAP:Category>XIAdapter</SAP:Category>
  <SAP:Code area="BPE_ADAPTER">MESSAGE_NOT_USED</SAP:Code>
  <SAP:P1 />
  <SAP:P2 />
  <SAP:P3 />
  <SAP:P4 />
  <SAP:AdditionalText />
  <SAP:ApplicationFaultMessage namespace="" />
  <SAP:Stack>Message interface is not used by this process</SAP:Stack>
  <SAP:Retry>M</SAP:Retry>
  </SAP:Error>
I have refered links but not able to get the clue for this error as its from the Call adapter.
error: Message interface is not used by this process Netweaver PI 7.0
BPE_ADAPTER: MESSAGE_NOT_USED
Regards,

Hi,
I just saw your IP design and from this I can see that you have message mapping between Sender(as in Outbound interface MIOASY) and abstract interface (as in MIAASY) and then in that you have used transformation step to utilise Interface mapping which is between same abstract interface which is not required at all as message type for both the interfaces is same. For me, what your configuration would be is
1. Sender agreement to fetch the message from outbound interface(MIOASY) utilising communication channel with whatever adapter you have used
2. Receiver Determination with Sender and sender interface as MIOASY while receiver as IP(Integration process)
3. Interface determination between
    a. Sender and Outbound interface and Abstract interface with interface mapping IM_Sender
    b. IP as sender with abstract interface MIAASY and receiver interface MIIASY with no interface mapping being used as it must be of same type as receiver interface is
4. Receiver agreement with MIIASY being used as receiver interface and communication channel utlililsed to convert it into receiver format.
If I am assuming it correct then if you see then inside BPM we are not using receiver interface MIIASY which is why I feel this error is coming.
However, if you design it something like this then I feel the error would get resolved
Design
1. Make one abstract interface (MIAASY_Sen) of same type as sender, and create another abstract interface (MIAASY_Rec) of same type as your receiver message type
2. Create message mapping between sender message type and receiver message type, Interface mapping IM_ABS - (MM_ABS_ABS) between sender abstract interface (MIAASY_Sen)  and receiver abstract interface (MIAASY_Rec)
3. BPM should be something like this
   Container:*
rec Abstract Interface MIAASY_Sen
send Abstract Interface MIAASY_Rec
Receiver (rec) - Transformation (IM_ABS) -  sender (send)
Configuration
1. Sender agreement to fetch the message from outbound interface(MIOASY) utilising communication channel with whatever adapter you have used
2. Receiver Determination with Sender and sender interface as MIOASY while receiver as IP(Integration process)
3. Interface determination between
    a. Sender,Outbound interface MIOASY and Abstract interface MIAASY_Sen with no interface mapping
   b. IP as sender with abstract interface MIAASY_Rec and receiver interface MIIASY with no interface mapping being used as it is of same type as receiver interface is
4. Receiver agreement with MIIASY being used as receiver interface and communication channel utlililsed to convert it into receiver format.
Let me know if it works.
Regards,
Amit

Similar Messages

  • Error: Message interface is not used by this process Netweaver PI 7.0

    Hi All,
    I am receiving this error in file to idoc scenario. The file is being picked up by communication channel. Then through an interface mapping IM_MET_ROUTE is being forwarded to a BPM MET_FILE_ROUTE. The MET_FILE_ROUTE forwards it to different BPM depending on file type. whenever I am posting a file it is not reaching IM_MET_ROUTE and giving an error  as shown below.
    <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--
    Call Adapter
      -->
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
      <SAP:Category>XIAdapter</SAP:Category>
      <SAP:Code area="BPE_ADAPTER">MESSAGE_NOT_USED</SAP:Code>
      <SAP:P1 />
      <SAP:P2 />
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText />
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>Message interface is not used by this process</SAP:Stack>
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error>
    Can you please suggest any solution to remove the error.

    Hi All,
    Thanks a lot Vikrant for your suggestion. The error is resolved. This was not a configuration problem. This was a design problem. Initially I also looked for configuration changes but that was correct hence I came to conclusion that this might be a design isuue.
       These are the steps that we should follow to resolve the errors
    1. First Check your configuration again and again with test tool and payload to find where exactly your configuration is failing.
    2. The above step will not be successful since we are already receiving the error.
    3. The above test will fail in interface determination step.
    4. Please go through the interface determination in Integration repository(PI 7.0).
    5. Check whether all interface mapping,source and target message interface are proper or not.
    6. if receiver or sender of message is an BPM please look into their receiver and sender element message type.This must match with the one specified in Interface mapping defined within Integration directory( in the interface deterination step).
       In my case the sixth step above was the solution.

  • Message interface is not used by this process

    Hi,
    I´ve  created a process to get a txt file in the O.S., verify this file and create another file. This verify I´m using BPM but there is an error message:
    "SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30"           xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
      <SAP:Category>XIAdapter</SAP:Category>
      <SAP:Code area="BPE_ADAPTER">MESSAGE_NOT_USED</SAP:Code>
      <SAP:P1 />
      <SAP:P2 />
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText />
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>Message interface is not used by this process</SAP:Stack>
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error>"
    Could you help me,
    thanks,
    Renato

    Hi Renato,
    Can you please elaborate what you did you do to eliminate the problem. I am facing the same one now.
    A file is received followed by FCC and then a interface mapping is to be called. somehow the system is unable to find the necessary mapping and giving this error.

  • Getting message.. accessory not supported by this ipad...trying to use Seagate external hard drive

    I recently bought a Seagate Backup slim bundle to use with my ipad. I am getting a message saying "accessory not supported by this ipad". What do I need to do?

    Howdy pbfrost,
    You should first check to make sure that your device is compatible with the iPad. See this article -
    If you need help with iPhone, iPad, or iPod touch accessories - Apple Support
    According to the Apple's store requirements for the Seagate Backup, it needs to be used with a computer. See this page -
    Seagate 2TB Backup Plus Slim for Mac Portable Hard Drive - Apple Store (U.S.)
    If you are trying to back up your iPad, you can use either iTunes while connected to a computer, or iCloud. See this article -
    Back up and restore your iPhone, iPad, or iPod touch using iCloud or iTunes - Apple Support
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

  • BPE adapter : message not used by any process

    hi frnds,
    I've created 2 scenarios using BPM
    1) merge scenario: 2 msgs ==> BPM ==> 1 msg
    1st msg is going without any problem. but 2nd msg is giving error saying 'BPE ADAPTER ERROR: message not used by any process'. i checked in sxi_cache and found that return code for Intg'n process is 0 only. but still i tried reactivating. but no use
    2) split scenario: 1 msg ==> BPM ==> 2 msgs
    sender msg is going without any problem,but not receiving 2 rcvr msgs to the target directory. return code of IP is 0 and no other errors.
    after installing PI on my system, for the first time i'm trying BPM scenarios. simple file to file working properly. BPE adapter has to be activated manually or i missed any initial configuration??? pls help me to resolve this.
    thanks.

    abhishek,
    I have used the following steps in BPM for this scenario xml file ==> BPM ==>xml file
    1) data types: a)send_dt
                            b) rcv_dt
    2) msg types  a) send_mt
                            b)rcv_mt
    3) interfaces   : send_ob_im
                              send_abs_im
                              rcv_abs_im
                              rcv_ib_im
    in integration process,
    start ==> receive ==> send ==> stop
    so in general its like,
    send CC ==> send OB I/F ==> send ABS I/F ==> rcv ABS I/F ==> rcv IB I/F ==> rcv CC
    when i'm not using BPM, outbound queue SMQ1 is empty and messages are not stickking up there. but if i use BPM, SMQ1 is having entry saying 'SYSFAIL'. for the first time i'm doing  the BPM scenarios.
    thanks.

  • BPE_ADAPTER MESSAGE_NOT_USED Message is not used by any processes

    We need some help on BPM flow. We are at it for last 3 days without much progress. We are able to make sync call to same BAPIs and get data without any issue. However, with BPM we have this issue
    I am creating the simplest integration scenario as
    1.       HTML/HTTP-->BPM (Async)
    2.       BPM-->R/3 (Sync)
    3.       BPM-->File (Async)
    Created all required interfaces and mapping. I have some dummy mapping for first 2 cases. I am able to activate the integration scenario and Integration Process without any error. I am able to import it in integration directory successfully without any error. When I am executing the first async request from HTML client I am invariably end up with an error from sxmb_moni as
    <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--
    Call Adapter
      -->
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
      <SAP:Category>XIAdapter</SAP:Category>
      <SAP:Code area="BPE_ADAPTER">MESSAGE_NOT_USED</SAP:Code>
      <SAP:P1 />
      <SAP:P2 />
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText />
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>Message is not used by any processes</SAP:Stack>
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error>
    The BPM is not getting invoked. Looking at the trace it shows that there is an error after creating BPE proxy for message as
    <Trace level="3" type="T">created BPE proxy for message DE5FB5802F33D3F19373005056A12466</Trace>
      </Trace>
      </Trace>
    - <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">
      <Trace level="3" type="T">Persisting message after plsrv call</Trace>
      <Trace level="3" type="T">Message-Version = 007</Trace>
      <Trace level="3" type="T">Message version 007</Trace>
      <Trace level="3" type="T">Pipeline CENTRAL</Trace>
      </Trace>
      <Trace level="3" type="System_Error">Error exception return from pipeline processing!</Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
    What I have checked so far:
    1.    I have checked that the developer key is assigned to my user id
    2.    Used SWF_XI_CUSTOMIZING to make sure that all the process are green
    3.    Used sxi_cache to make sure that the BPM process has return code 0 and also reactivated it numerous times. Also checked activation log and no error there
    4.    Used SXMP_ADM_BPEAutomatic BPM Customizing to check all the entries are green
    5. There are not any message in sxmb_moni_bpe for my interface shows no message
    Input call has:
    1.    Sender Service: MFG_BPM_BusinessSystem
    2.    Sender Interface: MI_Outbound_Async
    3.    Quality Of Service: EO
    4.    Sender Name space: Name space
    5.    Input XML:
    <?xml version="1.0" encoding="UTF-8"?>
    <ns0:BAPI_SALESORDER_GETLIST xmlns:ns0="urn:sap-com:document:sap:rfc:functions">
       <CUSTOMER_NUMBER>0000001000</CUSTOMER_NUMBER>
       <DOCUMENT_DATE/>
       <DOCUMENT_DATE_TO/>
       <MATERIAL/>
       <MATERIAL_EVG>
          <MATERIAL_EXT/>
          <MATERIAL_VERS/>
          <MATERIAL_GUID/>
       </MATERIAL_EVG>
       <PURCHASE_ORDER/>
       <PURCHASE_ORDER_NUMBER/>
       <SALES_ORGANIZATION>1000</SALES_ORGANIZATION>
       <TRANSACTION_GROUP/>
       <SALES_ORDERS>
          <item>
          </item>
       </SALES_ORDERS>
    </ns0:BAPI_SALESORDER_GETLIST>
    Any clue, help pointer will be of great help. Just beats me, what is wrong!!
    Version:
    SAP R/3 ECC 6.0
    XI 7.0

    Hi,
    Please check these threads where they have the same issue:
    Message is not used by any processes
    Error: Message is not used by any processes
    Error: BPE_ADAPTER Message not used in any process
    Message is not used by any processes
    ---Satish

  • Error: BPE_ADAPTER Message not used in any process

    Please help me fix this error.
    My scenario is i have a bpm process for merging three files.
    and i configured in this way..
    merge the three files into one and send into SAP
    i have three communication channels (file adapter) for three files
    one communication channel xi adapter for a proxy into sap.
    using these files as input to BPM process
    then using BPM process as sender to the proxy reciever
    I am getting error from sxmb_moni in xi box
    as error category:BPE_ADAPTER
    error id: message_not_used.
    it says message not used in any process.
    please help me correct this problem..
    thanks
    jp

    JP,
    Are u sure there is nothing wrong in your design part? Also Are u using Fork to receive 3 files parallely, If yes then all the 3 files has been checked for start process? Can u confirm this.
    Also in the Inerface determinations did u gave abstract interfaces that BPM is recieving?
    Best regards,
    raj.

  • Message Interface does not exist in IR u0096 but it does!

    Hi, well again i have a problem. I am still trying to get the XI-demo Checkflight…. to run but there are some obstacles on my way.
    I just wanted to check a MI given in the ID to check the attributes and picked it in the ID to get linked to the IR but a pop-up appears saying
    “Message Interface does not exists in Integration Repository”
    What’s the reason for this because obviously it is there, still existing.
    I tried to refresh the cache of all XI-components, did a server restart but nothing seems to be working.
    On the other hand I have some other questions:
    -     Why is it not possible to delete an object (business system) from the ID? I know because of the dependencies of the different channels but it should be possible because of re-generation of the communication-channels (this was also my approach for solving the problem mentioned above!)
    -     When do I have to refresh the cache in general? Is it indefinite whenever I want to or it seems to be the right time because something is not running the way it should and it seems a little odd

    Hi Carsten Heinrich,
    This will help you,
    1)     Cache Connectivity Test
    In RWB component monitoring, we now have the option of checking whether the cache-connectivity is functioning correctly. This is useful when we are experiencing problems when updating the runtime cache. The system displays a separate window in which we perform the test. If no previous tests have been performed, the system displays a corresponding message. Otherwise, the system shows when and by whom the last test run was started, together with the result of this test.
      To start a new test run, choose Start Test.
    The system displays the first results of the test run. Since the whole test takes some time, we can update the displayed results if necessary.
    To Update the displayed results, choose Refresh Display.
    The overall result for each component is displayed as a green, yellow, red, or gray symbol. A green symbol is only displayed if both update steps for the runtime cache were successful, that is, they both have a green symbol.
    2)     Cache notification status
    a)     Start the Integration Repository.
    b)     Select Environment ® Cache notification.
    c)   Have a look at the entries for the relevant user and date.
    d)   Have a look at the entries for the relevant cache instance, user and date.
                   3)    Cache update and resend the message
    a)Start transaction SXI_CACHE.
    b)From the context menu XI Runtime Cache select Start Complete Cache Refresh.
    c)     Call transaction SM58 to check the status of the refresh process.If no entry for function module SAI_CACHE3_REFRESH_BACKROUND is Present any more the cache update is finished.        
             4)     Deleting the SLD Cache
      Many actions require  to access System Landscape Directory content from the Integration Builder. To optimize performance, this content is loaded into a cache so that the System Landscape Directory does not have to be accessed directly each time that System Landscape Directory content is required.
    However, this cache is not automatically updated if changes are made to the content of the System Landscape Directory. For this reason we delete the System Landscape Directory cache if changes have been made to content in the System Landscape Directory. The cache is then filled each time that the System Landscape Directory is accessed. If we log on to the Integration Builder after we have made a change in the SLD, we do not need to delete the SLD cache.
    To clear the SLD cache, from the Integration Builder main menu, choose Environment  ®  Delete Cache for SLD Data.
    Once we have deleted the cache for SLD data, accessing objects in the SLD may take longer than usual initially.
    Regards
    Agasthuri Doss

  • Message interface does not exist in any software components installed on th

    Message interface does not exist in any software components installed on this business system.
    hello,
    When I check the interfaces on the business systems of 1 technical system, none of them have sender or receiver interfaces, hance I can't use them. The interfaces should ofcourse be on the Directory.
    I have deleted the business systems and the technical system and created them again, but no result.
    The product and software componets are in the technical sytem and business systems.
    Any help would be usefull.
    thanks,
    Job

    Hello!
    If someone will search in the future for this error, here is the solution:
    The error occurs if the GUID of the software component at the SLD is different to the one at the repository. Please compare the GUID at the SLD -> Administration -> Content Maintenance -> Dropdown "Component Version" -> Dropdown "Software Component Version". At the Integration Repository you select the Software Component Version at at the tab "Keys" you find the related GUID.
    The error occured because the Software component has been created manually at the system. The repository content came from another system via import with own SLD (and because of that with another GUID for the software component).
    Kind regards,
    Klaus

  • Message is not used by any processes

    Hi,
    I've made a BPM and in sxmb_moni I get this:
    <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
      <SAP:Category>XIAdapter</SAP:Category>
      <SAP:Code area="BPE_ADAPTER">MESSAGE_NOT_USED</SAP:Code>
      <SAP:P1 />
      <SAP:P2 />
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText />
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>Message is not used by any processes</SAP:Stack>
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error>
    I check my return code in sxi_cache and it's not 0 after activating.
    How could I resolve this error?
    Thanks in advance,
    Samantha.

    Hi,
    I don't understand "Is the BPM instance being created in the first place?". I've created the BPM for the first time, I don't know if you refer to this.
    When I click on PE, I get: "the action is not valid for the selected message", so I can do nothing.
    I think my user has developper key, although I'm going to make sure of it.
    Thanks,
    Samantha.
    Message was edited by:
            Samantha Núñez

  • My iPhone 5s won't turn off or on it keeps flashing the apple screen on off.  When I tried to connect to iTunes on windows 8 computer, it comes up with an error message: iTunes could not connect to this phone.  An unknown error occurred OxE8000084

    Can anyone help me?  My iPhone 5s is flashing the apple screen on and off and I can turn the phone on properly or off.  When I connected it to iTunes on my windows 8 computer I got the following message: iTunes could not connect to this phone.  An unknown error occurred OxE8000084.  Can anyone help me correct this so I can start using my phone again.
    Thank you

    http://support.apple.com/kb/TS3221

  • Message interface does not exist in any software components

    Hi masters,
    I'm having problems with this message in my repository when I try to create an Interface determination with two interfaces mapping: "Message interface does not exist in any software components installed on this business system".
    note: I have read all the posts about this problem but nothing has solved it.
    I will describe more or less how is my SLD.
    First all, my Technical System is an Web AS ABAP (non a third party).
    I have created two receivers determination, with out problems, then, created the interface determination, with two Inbound interface, BUT, when I create a condition, the message appears, and the XPath doesn't shows the nodes for do the condition..
    I have checked the GUID, and that's good.
    NOTE: I have a second SWC but this is a third party... and when I test to do the same in this system, I have NO problems... so.. what is wrong with the Web As ABAP?
    Regards and thanks

    did you mean:
    SLD -> Technical System->Technical System Type: WebAsAbap-> Installed Products->Add New Product and add my Software Component???
    if is this, I have already done this, and still doesn't works.
    Thanks

  • Message interface does not exist in any software components installed

    "Message interface does not exist in any software components installed on this business system"
    Essa é a mensagem de erro que estou tendo ao tentar configurar o XPath Receiver Determination do cenário SRVSC_WebAS_Outbound_ServiceStatusCheck.
    Já notei que a mensagem dá porque o meu BS da NFe não está com o SWCV SAP SLL-NFE 1.0. Mas isso só no ID porque no SLD ele aparece. Não sei mais o que fazer pra ele aparecer no ID. Já eliminei o BS, executei um refresh do cache do SLD, depois executei um refresh full e nada! Quando eu crio o BS novamente, ele vem sem o SWCV SAP SLL-NFE 1.0.
    Tive que configurar o XPath na mão para todas as SEFAZes!!!
    Já li vários threads a respeito desse erro e executei vários procedimentos sugeridos, mas nada.
    Alguém já possou por isso?!?

    para ser mais preciso, verifique no payload de envio e recebimento da mensagem de verificacao de status do servico se estao correspondentes ao que estao abaixo, essa mensagem é de verificacao do SEFAZ de SP (35) para o ambiente de homologacao
    (SENDER)
    <?xml version="1.0" encoding="utf-8"?><n0:nfeStatusServicoNF xmlns:n0="http://sap.com/xi/NFE/005a" xmlns:prx="urn:sap.com:proxy:PID:/1SAI/TASE95D30ADB76F1544C2D5:700:2009/02/10" xmlns:n1="http://www.portalfiscal.inf.br/nfe"><n0:cUF>35</n0:cUF><n0:tpEmis>1</n0:tpEmis><n0:tpAmb>2</n0:tpAmb><n0:nfeCabecMsg><n1:cabecMsg versao="1.02"><n1:versaoDados>1.07</n1:versaoDados></n1:cabecMsg></n0:nfeCabecMsg><n0:nfeDadosMsg><n1:consStatServ versao="1.07"><n1:tpAmb>2</n1:tpAmb><n1:cUF>35</n1:cUF><n1:xServ>STATUS</n1:xServ></n1:consStatServ></n0:nfeDadosMsg></n0:nfeStatusServicoNF>
    (RECEIVER)
    <?xml version="1.0" encoding="UTF-8"?>
    <nfeStatusServicoNFResponse xmlns="http://sap.com/xi/NFE/005a"><nfeStatusServicoNFResult><retConsStatServ xmlns="http://www.portalfiscal.inf.br/nfe" versao="1.07"><tpAmb>2</tpAmb><verAplic>SP_NFE_PL_005e</verAplic><cStat>107</cStat><xMotivo>Serviço em Operação</xMotivo><cUF>35</cUF><dhRecbto>2010-05-26T09:37:22</dhRecbto><tMed>1</tMed></retConsStatServ></nfeStatusServicoNFResult></nfeStatusServicoNFResponse>

  • When I connect my iPad to my iMac I get a repetitive flashing error message "iTunes could not connect to this iPhone. This device is no longer connected."

    When I connect my iPad to my iMac I get a repetitive flashing error message "iTunes could not connect to this iPhone. This device is no longer connected." iPhoto eventually launches but iTunes will not launch iTunes.  iPad will not charge.  Restarted iMac and rebooted iPad and no difference.

    Hi GJ374,
    Thanks for using Apple Support Communities.  This article has steps you can take for issues with your iPad not being correctly recognized in iTunes:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Cheers,
    - Ari

  • Error - "Message Interface does not exist in any software components"

    HI
    This is an Idoc sender - SOAP receiver scenario.
    When I try to create the receiver determination, I get a warning message -
    " Message interface does not exist in any software components installed on this business system"
    I checked all the usual things & also reimported the IDoc metadata.
    Any suggestions are appreciated!
    Thanks
    Rachana

    Hi Rachana !!
    You should also check  if the given idoc type in mapping is the same that in the WE20.
    Also try to reactivate your integration directory objects by making any dummy changes.
    Check your receiver business system (I mean XI), that the logical systems are ok.
    Check this document (page 31):
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/2f2a9fa2-0a01-0010-32ac-d281db722b86
    Regards,
    Matias.
    Message was edited by:
            Matias Denker
    Message was edited by:
            Matias Denker

Maybe you are looking for

  • Burning bluray disks on Macbook Pro 17"

    I have a 1080p camcorder and I wanted to burn my movies on a bluray disc so I was just wondering is there any way to play and burn bluray discs on a mac book pro 17". I tried to find some external drives and I found this two external drives: http://f

  • Restrict a t.code VK11 using Site as authorization object

    Hi all, We want to restrict VK11 t.code using Site as one of the authorizations. By default it has only Sales Org, Distr channel and division. I've added one more field for "Site" manually. We have defined specific values for Site in authorization ob

  • Aaa authentication for https access

    I have several Catalyst 3750 switches that I'm running Tacacs on. I set the switch up to be an http server so that some of our admins could administer the switches through the web gui. Is it possible to login to the web console via your Tacacs login

  • Is it possible to "lock" a folder?

    Does anyone know if there is there a way to configure a standard folder so that a password is always required to open it, regardless of privileges of the current user? G5   Mac OS X (10.4.6)  

  • Lightroom Memory Issues

    Here's what I am getting: Lightroom version: 3.4.1 [749592] Operating system: Windows Vista Home Edition Service Pack 2 (Build 6002) Version: 6.0 [6002] Application architecture: x86 System architecture: x86 Physical processor count: 4 Processor spee