BPM Message Split in Block par for Each: Just last message is sent n-times

Hello everybody,
we got BPM with a message split. In a par-for-each block the message is send.
Asuming I have 3 lines in the multiline container element, I can see in SXMB_MONI that that message is send 3 times.
The error is, that 3 times the last message is send.
<u>Sample Error:</u>
Message incoming in BPM:
<root>
  <mymessage>M1</mymessage>
  <mymessage>M2</mymessage>
  <mymessage>M3</mymessage>
</root>
Messages outgoing:
<root>
  <mymessage><b>M3</b></mymessage>
</root>
<root>
  <mymessage><b>M3</b></mymessage>
</root>
<root>
  <mymessage><b>M3</b></mymessage>
</root>
--> As you can see, just the last message M3 is send 3 times!
What can I do?
Regards Mario

If I take the payload from SXMB_MONI an try to test, I get an syntax error when I copy&paste the data into the message mapping.
This is very strange, because
a) the message mapping is done on basis of imported IDOCs!
b) the BPM works without throwing a mapping error
So what should I do?

Similar Messages

  • BPM - Par for each

    I am having some issues with my Par for Each block in my BPM.
    My scenario is File(CSV format) --> BPM --> IDOC.
    The BPM will receive the file and it will convert the incoming message into IDOC and in the Parforeach Block I am sending the IDOC to R/3.
    Currently in my file I am having around 1300 Records.
    I am seeing the following error message in the Message Monitoring
    Work Item  000000015782 :Object Flowitem method cannot be executed
    Error When Processing Node 00000000023 (Parforeach index 00000000)
    Parforeach  table element contains  1268 entries
    Error when creating  a component  of type "dynamischer paraller  abschint"
    Error When Processing Node 00000000023 (Parforeach index 00000000)
    Error during result  processing of work  item  00000015784
    Question
    Whats the problem ? Previously when I ran for few records it ran fine? so the Parforeach is unable to handle the load? Where to increase the limit.
    thanks for your help.

    Hi Jenni,
    Check this...
    A ParForEach is recommended if:
    ·        The number of parallel processing branches is less than 999 (the multiline table element that is processed in the ParForEach contains less than 999 lines).
    http://help.sap.com/saphelp_nw04/helpdata/en/ce/bb2c421f3fda2ce10000000a1550b0/content.htm
    Regards
    Anand

  • Par For each/ForEach

    All,
    Here s my situation:
    I have performed a transformation step 1:N: where i split my messages N times.
    After which i am sending my N messages one by one to the receiver.
    Now should i use a Parfor each or a ForEach for this scenario???
    In either way how should i define my parameters.My source is OrderRequest and my target is OrderResponse(N)
    in my container step i defined these msg types
    SingleOrderResponse TYPE: OrderResponse_ABS and MultiOrderResponse TYPE: OrderResponse_ABS and  now i tried Parforeach in the trasformation step of my BPM:i specified my interface mapping gave source msg as OrderRequest
    and target msg as MultiOrderResponse checked the multiline container element,and next is my send step which i included in ParForEachBlock, where i specified my multiline element as MultiOrderResponse and in the currentline i specified singleOrderResponse and in the stpe step i used the singleOrderResponse Msg type.
    But in my tranformation step, i have this error msg saying cannot define multiline element....
    Can anyone suggest me on what i should do?
    Thanks in advance

    Hi Aarthi,
    Let me first make sure that I have your requirements right.
    What you want to do is perfrom a 1:N transformation and then send each of your response to the receiver.
    For this , in your BPM,
    1. the first step will be receive step where you receive your request message.
    2. the next step will be your Transformation step, where you perfrom 1:N mapping.
    3. Finally, you will have to define a block with a send step. the bloack can be par for each or for each.
    From what I understood of your definition of the problem, i think you have put your transformation step within the block and that should not be done.
    Also, with the transformation step, the containder element for the reponse should be a MULTILINE element as the mapping will produces N messages.
    DO let me know if i have understood your requirements well and if this solution does help you.
    Regards,
    Bhavesh

  • How can I DISABLE the pop up 'Would you like to copy it to Library', preventing this message from bothering for each and every book, again and again, time after time? (Windows 7 64bit US).

    How can I DISABLE the pop up 'Would you like to copy it to Library', preventing this message from bothering for each and every book, again and again , time after time? (Windows 7 64bit US).
    I guess this may be a feature request. Adobe may think this is a good message for every new eBook.
    I sure would like to decide about that myself.
    Thanks in advance if this will be changed.

    singmk wrote:
    Decided to setup the mail for exchange on my N8 so I could see my work emails. Worked like a charm but after a couple of hours decided I didn't like being that contactable so deleted the mailbox.
    Now to the problem, during setup I was forced to enable the phone lock and had to pick a 7 digit alphanumeric code. Fair enough I thought and went ahead. When I removed the mailbox however the lock remained in place with the default auto time of 30 minutes. When I checked in Phone management there is no option to disable this lock so I thought I could at least change the default time to something bigger but when you try, it remains at 30 mins. You also can't disable the auto time as it pops up an error message saying can't unlock phone.
    Does anyone know if I'm missing something obvious here or is this something which can't be disabled once it's switched on? I've done a soft reset back to factory settings with no luck and the only other thing I can think of is re installing the firmware which seems a bit extreme.
    Would like to hope there is some way to have control over this. Can someone help?
    Which firmware your N8 having now? You can check firmware by choosing Call, then type *#0000#.
    My N8 works fine on security setting and able to define Phone auto lock period, by choosing Menu>Settings>Phone>Phone management>Security settings>Phone and SIM card>Phone auto lock period>User defined>Lock after(minutes)
    You will prompt to enter Lock code each time u define auto lock priod or enable/disable auto lock.
    Hope this can help you.
    If you find this post helpful, please show your appreciation by clicking the Kudos star at the left. If it provides you the solution, please click on the GREEN Accept as Solution button at below

  • Assign payment block Reasen for each Tolerance key

    Dears experts ,
    hi , could you help me to check is it available to assign payment block Reason for each Tolerance key

    Hi,
    Please provide Details of your exactly requirement --
    as per my observation - above mentioned Tolerance key in QM Quality Management -- Payment block we can't assigned
    Thanking you
    Mahesh

  • Message split on adapter engine for the java based IDoc adapter

    Hi Guys,
    Do you know if message split on adapter engine is available for the java based IDoc adapter on the single stack (PI 7.31)?
    I'm getting such exception when I try to post 3 IDocs
    Transmitting the message to endpoint <local> using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.idoc.exception.IDOCAdapterException: Error before sending due to idoc parsing error: (7) IDOC_ERROR_PARSE_FAILURE: Invalid XML 1.0 character encountered within IDocXML for type <ns0:Messages>:
    state=EXPECTING_IMMEDIATE_TAG_END, charPosition=68, lineNumber=1, columnNumber=69, invalidChar=U+0078,
    sourceSnippet=...UTF-8" standalone="no"?><ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge"><ns0:Message1><...
    ^
    Mapping is one to many.
    Each IDoc content has been compared manually against the xsd schema and it was fine.  
    I know that old way of modifying xsd is still possible.
    Best regards,
    Wojciech

    Did you find a solution to this? Having a similar error right now.
    Thanks and kind regards
    Jens

  • How can I turn off an alert for each txt when message app is open?

    I think this is a simple problem but I can't find a solution! I want to receive an alert (either vibration or sound, depending on the position of the silence switch) when I get a new txt. This is how I am set up now. However, once I open the messages app and am engaged in a discussion, I no longer want to receive an alert for each message. So basically: If message app is open, no alert... otherwise, alert! Is this possible?

    Latest update on 'Network Lost' Message. I have tried all the suggestions, ie, Setting my carrier to Automatic and resetting my Network settings but nothing works. I had a long conversation with someone at Apple this morning and he said there was no way to stop this from happening. Gutted! My husband and I went through the settings on both our iPhones earlier and discovered that he has a different software version to mine, He hasn't updated his and he never gets the message. Now I am wondering if it's possible to go back to an earlier version and if so how? Can anyone tell me please?

  • How do you get the display message to appear only one for each case?

    Hi Friends,
    I am here with another question....
    I have built a VI that should contain 6 checkboxes, when a particular checkbox is selected by the user it should display a message to the user of which checkbox is checked.
    My problem is:  when I select one of the checkboxes the display message appears continously one after the other, even when the OK button is pressed.
    Can anyone help me please??
    Solved!
    Go to Solution.
    Attachments:
    checkbox - clusters Folder.zip ‏14 KB

    Try this:
    LabVIEW Champion . Do more with less code and in less time .
    Attachments:
    checkbox - clusters_MOD.vi ‏23 KB

  • How do I stop the message "user name or password for iCloud is incorrect" from popping up 2 times in a row when i try to get mail from other accounts? thank you in advance

    How do I stop the message "Cannot get mail. The user name or password for iCloud is incorrect" from popping up 2-4 times consecutively every time I choose MAIL on my iPhone 4,  7.1.1  I have to select "OK" 2-4 times each time before I can read other email accounts.  I used to have an "@me.com" account which I think was automatically changed to an "@icloud.com account."  I opened a new iCloud.com account yesterday because I could not figure out how to get in the old ones.  I want to delete the original @me & original iCloud account.  When I try to delete the account, they tell me my DOB is wrong. I just want those pop ups to stop.  Thanks in advance for your help.

    Hi Suzanne,
    It sounds like you’re running into a password issue with an older Apple ID that’s setup on your iPhone, which is preventing you from removing an iCloud account from your device. Take a look at the article linked below, it outlines all of the possible ways to change an Apple ID password.
    If you forgot your Apple ID password - Apple Support
    After you enter your Apple ID, there are three ways you can change your password:
    Answer your security questions. Use these steps if you know the answers to your security questions.
    Use email authentication. We'll send you an email that you can use to change your password.
    Use two-step verification. If you set up two-step verification, you can use it to change your password. You just need your recovery key and a trusted device.
    So long,
    -Jason

  • When using spotlight search on my 5s it will not show past text messages that haven't even been deleted even if I type a specific word that I know is in a message I want to search for. I have message search turned on in the spotlight settings.

    When using spotlight search my phone will not show all text messages with a common word even though I have not deleted any messages from my phone and I have the message search turned on in settings under spotlight search. The search only shows the messages that are recent within the past day or so. Why won't it show the other messages when I search for them even using a specific word that I know was in the message I'm searching for.

    Hello ChiomaM,
    It sounds like you are not getting notifications for new text messages that are coming in, and you must manually check the app. I recommend checking the Notification settings to see if they are configured correctly:
    iOS: Understanding notifications
    http://support.apple.com/kb/ht3576
    iOS apps can provide three types of notifications:
    Sounds: An audible alert plays.
    Alerts/Banners: An alert or banner appears on the screen.
    Badges: An image or number appears on the application icon.
    You can view which apps provide notifications and adjust notification settings using Settings > Notification Center. For additional information, refer to the user guide for your device.
    Thank you for using Apple Support Communities.
    Regards,
    Sterling

  • When using Verizon message +; is there a setting for delaying sending text message?

    I switched from GO SMS Pro to Verizon message +. However, I liked the ability to delay sending the text (in case of bad finger). I have not found a setting to delay sending. Has anyone found a way?

        prr284
    I understand how important it is to have the feature you need from your messaging service! At this time, there is not a way to set up a delayed message from Verizon Messages. I'm sorry about any inconvenience this causes! I can lift this up as a suggestion for improvement. Thanks for the idea!
    RuthW_VZW
    Follow us on twitter @VZWSupport

  • How to block Keynote for iPad (just allowing people to watch)

    Hi, I wonder if it was possible to "block" Keynote on a presentation, just allowing people to watch it. I want to make impossible to double click and quit the "play mode". I want to make the power button AND the home button out of use as well.
    ANY IDEA??
    Thanx a lot

    This isn't possible to do in Keynote. You could export the presentation as QuickTime movie (on a Mac).

  • Firefox 4.01 with multiple tabs/windows open will close with the following dialoog boxes appearing, one for each window, evidently, "invalid preferences extensions.bprivacy.timer check that is listed in defaults/prefs.js"

    The cause of the need to revert to the last known good operating condition was trying to download a file from a Yahoo discussion group. The download froze the machine. When Firefox was restarted, it froze on loading, at first step of loading multiple windows and tabs. Many reboots to the same frozen state led to revert to the last restore point. That produced equivalent results on startup of Firefox, the option of F8 and revert to last known good operating condition was done. Everything seemingly operate OK, with the exception of the pop-up dialog boxes on shutdown of Firefox .
    Began Thursday 5/26/11
    I know locations and dates of all files "prefs.js" but don't know what to do with them, if anything.

    I removed add-on BetterPrivacy. No problems since then anymore.
    Regards,
    HABSBURGER

  • Do i need to download Face Time to use this app? How come i was able to use this for free just last week? Now the same iPad FaceTime cannot connect to mine?

    Last week, I was in the same country as the Ipad I connected to through Face Time and it worked. Now, I am in another country and we cannot connect to each other. It just keeps ringing. Is this country related? I don't really know.
    When I looked for answers, I found that i had to download Face Time for a fee. I thought it was free. Is that why I cannot connect?

    What you can do instead of the partition is create a new user for your son on (YOUR partition).
    Transfer all purchases from the device to iTunes Back up the iPad , restore the device , synchronize the device.
    Erase your son's partition after you are sure everything works .

  • Message Splitting in ABAP Mapping

    Hi Everybody,
    I have Implemented ABAP mapping in  my Scenario and have used message splitting. That is for each header node of source corresponding number of target nodes should be created.I have a source node under which i have 5 subnodes and when this source node repeats again i need to generate two target nodes with 5 subnodes in each of the target header node.
    I have tested the scenario in SXI_MAPPING_TEST by making the following changes in IR and ID.
    1. Changed the cardinality to 0 to unbounded in Interface mapping.
    2. Have kept the Interface determination type to Enchanced.
    I am getting the ERROR" split mapping created no messages" in sxi_mapping_test.
    Can anyone help me out on this.Good answers will be rewarded.
    Thanks all,
    Zabiulla

    Prabhu,
    what needs to rely on Java stack is the adapter, not the mapping.
    Mohammed,
    make sure you create Messages/MessageX tags (with proper namespace) in your multimapping. Also, expect these tags in your input mapping.
    You can get the exact Messages/Message1 tags (with the namespace) in a message mapping with multiple input or output messages. Create it and go to test tab, just to check the tags you should read/create in your abap mapping.
    Regards,
    Henrique.

Maybe you are looking for