BPM: skip a permanent error in a sequential ForEach ? Possible ?

In a BPM, i split a message with 100 records in 100 individual records (1..n mapping).
Then i use a ForEach Block (sequential) to send those 100 records using a synchronous Send step.
The Send step is a call on a partner Web Service.
Sometimes i receive a SOAP Fault.
This SOAP fault can be:
a) a temporary problem on the remote system... for example a database is down
b) a permanent problem... for example something's wrong in a XML structure
But i don't know in advance what kind of unexpected problem this is.
So i have to stop the process and someone must determine if it's a case a) or b), using the BP Monitor.
In case of a), i just have to wait the problem is solved and restart the BP exactly where it was stopped
In case of b), there's no chance to solve the problem. The BP must skip this Send step N and continue with the Send step N+1 in the ForEach loop.
I'm not allowed to resend the whole 100 records in case of a problem with the record 50 for example....
If a set "Start new transaction" everywhere, the BP will be able to restart exactly where it was stopped.
Now my questions:
Is is possible to manually force the BP to:
- restart exactly where it was stopped ?
- skip the error and continue to the next step ?
- restart from the beginning ?
How ?
Thank you
Edited by: Thierry Genoud on Feb 5, 2009 2:14 PM

Hi Indranil,
     You don't see you BPM....
First go to SXI_CACHE and check that your BPM is listed there and that the compilation has been completed succesfully.
Is this the first time the BPM is being used? If so check if has been configured. For example, go to RWB->Component Monitoring->BPE in <SYSID>
and check if any error is listed there.
In order to check what is going on in your BPM you can trace it:
                  SXMB_MONI_BPE->Diagnosis Processes with Errors
                  SXMB_MONI->Process, get your msg and click on 'PE'. You should see the workitems and see if there is any error.
         Hope this helps you....
         Regards,
            Encinas.

Similar Messages

BPM Error Permanent Error in BPE inbound processing

Hi
I require some urgent help on this BPM issue.
We are trying to integrate SRM PO being directly sent to Vendors using HTTP. We are getting an error saying Permanent Error in BPE inbound processing. The scenario works like this.
SRM system would sent PO using the SRM Standard interface PurchaseOrderRequest_Out. We need to transform the message into cXML format and send it to the vendors using HTTP adapter. Using the HTTP response we need to trigger an email to the business process team.
The SRM interface is under the software component SAP SRM Server 5.5 and our mapping is being done in a common software component and for the vendor interface we have another software component. We have created a relationship in the SLD by making the common SWC as dependent software component to SAP SRM Server and Vendor Software Component. So in the integration repository we are able to get the interfaces for the SAP SRM Server and Vendor Software Component under the common software component. The receive step for this BPM is a copy of the standard SRM interface PurchaseOrderRequest_Out(as the standard interface is an asynchronous interface) and we would require an abstract interface for the BPM. We have checked the semantics for the BPM and its fine. The related ID development is in place. When the message is being triggered, it gives us this above mentioned error. When we go to the QRFC monitor we are able to check the details.
Regards,
Indranil

Hi Indranil,
     You don't see you BPM....
First go to SXI_CACHE and check that your BPM is listed there and that the compilation has been completed succesfully.
Is this the first time the BPM is being used? If so check if has been configured. For example, go to RWB->Component Monitoring->BPE in <SYSID>
and check if any error is listed there.
In order to check what is going on in your BPM you can trace it:
                  SXMB_MONI_BPE->Diagnosis Processes with Errors
                  SXMB_MONI->Process, get your msg and click on 'PE'. You should see the workitems and see if there is any error.
         Hope this helps you....
         Regards,
            Encinas.

Permanent error in BPE inbound processing for BPM Mesg Split

Hi Friends,
i have done the below scenario. i had done everything what theys mentioned in the blog but i am getting the error in smq2 as "Permanent error in BPE inbound processing" sysfail please helpme on this issue.
Illustration of Multi-Mapping and Message Split using BPM in SAP Exchange Infrastructure

Hi Uday,
Please check this blog for your error, This is really interesting. Permanent solution for your question.
Delivery Modes in BPM.
Thanks!

BPM workflow "In Process"-Queue "Permanent error in BPE inbound processing"

Hi All,
I am trying to collect messages from 2 different interfaces into BPM( Integration Process).
when I checked in sxmb_moni , i found the error on outbound status & BPM workflow has stuck with status "In Process".
it is not showing any error in Workflow, how to solve the issue.
due to the above error, other messages are stuck in Queue stating "Permanent error in BPE inbound processing".
Please help.
-Jyoti

Hi Jyoti,
Goto T.Code swwl, in that clear all fields and choose from date as 1 month ago and try to execute. Then, delete all entries there. And re-execute your scenario.
In this case, please see SAP Note 1126656.
Please see the below blog, it might be helpful to you.
/people/henrike.kaiser/blog/2009/02/03/how-to-analyze-stopped-queues-in-xi-ccbpm
Regards,
Rajesh

BPM: Permanent error in BPE inbound processing

Hi guys...
i am having a problem in my scenario which is involving BPM.
The problem is when i execute the interface it is showing green flag aginst PE in sxmb_moni and in smq2 one queue is showing with sysfail and BPM: Permanent error in BPE inbound processing error.
yes..i searched on SDN and found resources like Note number 1126656
i checked al the steps which were earlier mentioned posts like:
SWWL: there are no entries existing
SMQ2: cleared the queues ,regenerated but still no luck.
My undertsanding is no work is being generated at all .
I checked BPM with F7 : its correct no errors
BPM has return code of 0 in sxi_cache
In ID BPM is latest and refreshed.
Is there any way i can overcome this problem.
Your inputs will be of real help.
Thanks in advance.
Regards,
Kiran.

My undertsanding is no work is being generated at all .
If you are getting the error for Source ---> BPM flow then there is a possibility that the ID objects (RD, Interface determination) are to be blamed.
1) Recreate these particular ID objects/ make some dummy changes
2) Activate and ensure that Cache is refreshed
3) Delete the entry in the queue (or delete the queue)....do this only if the XI system is not of Quality, production
4) some times the BPM cannot be triggered from sending a test message from RWB .... so make a testing from the source application .... this particular case has heppened to me and hence suggesting to you.
Regards,
Abhishek.

IDoc to Soap, with BPM - Permanent error in BPE inbound processing

Hi Experts,
IDoc to Soap, with BPM - > Permanent error in BPE inbound processing
How to rectify this any issue???
Thanks-
sk

Hi,
The inbound processing encountered a permanent error and the queue therefore stopped.
The error message "Permanent error in BPE inbound processing" may be caused by the following:
- At the start or when you process a process instance, the inbound processing encounters an exception that was not handled. This exception is triggered, for example, by a transformation step, a synchronous send step or a control step but it was not caught in an exception handler branch. If the exception that was not handled occurs in the first transaction of the started process instance, the system does not write the process instance to the database but it sets the queue that has this error message to the error status.
Refer to the help in Note 1082099
- The inbound processing triggers this error if the correlation evaluation shows that a message should be delivered to a process instance that has the status "error". Since delivery to process instances that contain errors is not permitted, the queue is stopped.
Use the simulation of the message delivery in the detail view of the relevant queue LUW to determine the relevant process instance for the affected message and use transaction SXMB_MONI_BPE "Continue Process Following Error" (or transaction SWF_XI_SWPR) to continue. If you cannot continue the process instance, check whether you can logically delete the instance. In this case, use the method that is described in Note 807906 to logically delete a process instance.
Check whether your system contains other process instances that have errors in order to detect similar problems. Use transaction SXMB_MONI_BPE "Continue Process Following Error" or transaction SWF_XI_SWPR.
Use the report RSWF_CRL_MAINTAIN to check all of the correlation instances in question or the relevant process instances that you can reach using "Display Work Item".
- Messages that cannot be delivered because no correlation instance can be found may lead to the error that is mentioned here. Check whether the causes that are outlined in Note 1094028 affect your case.
Hope this will help you.
Regards
Aashish Sinha
PS : reward points if helpful.

Permanant Error in Inbound Processing in BPM

Hi All,
i have done a File1->JDBC(Synch)->File2 scenario using BPM.
It works fine when i have data in input file ie File1. However when my input file empty my scenario shows green flag in "OutboundStatus" and in queue gives error "Permanant error in Inbound Processing". When i tried to see the error in details got exception in START_PROCESS....
After deleting this entry from queue and sending file with data it works fine.....
I just want to know why it happens....? My input file can be empty as i am using it for triggering the scenario.
Do i need to do any settings in BPM or scenario to handle this?
Thanks,
Atul

hi atul,
in the rec step where u set the start process check box, you give the message. it is this message that is used to start the BPM process and not ur input file... the input file is used to trigger ur scenario not ur process. therefore u have exception in 'start process'.
hope it helps.
regards,
latika.

Permanent error in BPE inbound processing

Hi all,
We have recently migrated are XI scenarios to a new server.
In one of the file to rfc scenario whenver a file is processed i get the error in smq2: Permanent error in BPE inbound processing.
The chances of BPM and mapping error are less as the BPM is working live in another server.
What could be the other problems.
REgards
Edited by: Vinithra Iyangar on Feb 26, 2009 10:36 AM

Dear Vinithra,
Its highly improbable for this error to occur because of transports going wrong. There is one more case which i am sure is the cause why you are getting this error.
"This behavior is when we place the files in the respective folders both the files are picked up by the file adapter. Process instance is generated for BPM. First receive step is encountered and the file is received by it. But due to the wait step the second receive step is not open and hence the second file cannot be delivered to it. Unlike the first case, in this case as the buffering is deactivated the file is not buffered and hence the inbound processing of BPM fails for the second receive step."
Please check if something like this is happening.
Refer : /people/milan.thaker/blog/2008/07/04/delivery-modes-in-bpm
Rgds
joel

"Permanent Error in BPE inboubd Processing" if payload is incomplete

hi all,
I have an BPM scenario and when payload is wrong or some field in the payload is missing i am getting "Permanent Error in BPE inboubd Processing" error. I have searched on SDN for same and found two blogs which might be helpful
/people/henrike.kaiser/blog/2009/02/03/how-to-analyze-stopped-queues-in-xi-ccbpm
/people/shabarish.vijayakumar/blog/2005/12/07/transformation-error-and-still-stuck
As per blog : /people/henrike.kaiser/blog/2009/02/03/how-to-analyze-stopped-queues-in-xi-ccbpm,
when i execute the function u2018Display Traceu2019
Data is coming as: 16 31 21.04.2010 - 12:06:37.0810000 DATA SWF_INB EXCEPTIONS WF-BATCH X Error during start of process of type WS90100001 by message 0050569F4A4E1DDF93A20375C360F54F WS90100001 XBQO$PE_WS90100001 0050569F4A4E1DDF93A20375C360F54F
when i execute the function u2018Simulate Message Delivery' it is coming as: Result of simulation: Message starts a new process
What is the meaning of this?
I have a transformation step in BPM only. Is there any validation of data performed before message is passed to BPM?
Thanks,
Mayank

Hi Maynak,
Whenever you will put incorrect data or missed any mandatory field to be created on target side then this error will occur .
Take the input and chek in the mapping test of IR and correct your source message.
In this situation we can do these two things if we are not in Production server.
1. Delete the errored queue and re trigger the message after correcting the source XML
2. Even if correcting the mapping error also again its not working then go to SWWL and delete all the process instaces and again re trigger the message .
It will work. As per my knowledge in PI7.0 the XML validation option is not available .
Regards,
Saurabh

Permanent error in BPE inbound processing error

Hi guys...
i am having a problem in my scenario which is involving BPM.
The problem is when i execute the interface it is showing green flag aginst PE in sxmb_moni and in smq2 one queue is showing with sysfail and BPM: Permanent error in BPE inbound processing error.
yes..i searched on SDN and found resources like Note number 1126656
i checked al the steps which were earlier mentioned posts like:
SWWL: there are no entries existing
SMQ2: cleared the queues ,regenerated but still no luck.
My undertsanding is no work is being generated at all .
I checked BPM with F7 : its correct no errors
BPM has return code of 0 in sxi_cache
In ID BPM is latest and refreshed.
Is there any way i can overcome this problem.
Your inputs will be of real help.
Thanks in advance.
Regards,
Seshagiri.

Hi Praveen,
If the BPM goes in error due to "The incoming payload structure is incorrect (not matching message type structure of abstract interface)" , is there any work around?
Currently in my scenario BPM goes into error due to incorrect structure , error show up in SMQ2 . And the subsequent message also get stuck. What I have to do is to delete the queue in error and reactivate the queue manually.
Is there any way we can avoid this situation.
Thanks,
Pankaj

Permanent error in BPE

Hi
When I trigger messages using BPM, the sxmb_moni shows chequered flag for all the three sender files. BPM has to merge it. When I click on PE, it goes to queues and the queues are in " SYSFAIL ', with an error messsage " Permanent error in BPE inbound processing ".
How do I find out why BPM is not triggering ?
Harish

Hi
Go to SXMB_Moni_BPE or click on the redflag at the outbound side in sxmb_moni . after going there you wwill have a work flow view where in you will come to know which step has error say mapping or fork ..
Go to transaction SWWL delete your process work item which is in error state . and then re run the scenario.
Let me know if this helps .
Regards
Ninad

File does not exist, SMTP permanent error

Hi All,
I got stuck with this error, please help me on this.
Mine is windows OS, apps 11.5.10.2
I have a cocncurrent program out file (.out) in out directory and also the same file with naming convention 'name_concurrenrequestid_1.EXCEL' extension in the same directoy. I need to send this EXCEL file as attachment to email id in windows environment. Whenver submit the request is giving the error.
File Does Not Exist
Error in Send Mail: ORA-29279: SMTP permanent error: 501 5.5.4 Invalid Address.
I verified the file , it is already existed in the directory. Why did it not recognized the file. I tried the below query in toad,, but got the 'FALSE' for %APPLCSF, and got the TRUE for custom directory which has the same file
declare
v_boolean BOOLEAN;
v_Len NUMBER;
v_Block NUMBER;
BEGIN
utl_file.fgetattr('%APPLCSF%\%APPLOUT', 'name_concurrentreuestid_1.EXCEL', v_boolean, v_Len, v_Block);
if v_boolean then
dbms_output.put_line('v_boolean: TRUE');
dbms_output.put_line('L:' || to_char(v_Len));
dbms_output.put_line('B:' || to_char(v_Block));
else
dbms_output.put_line('EX: FALSE');
end if;
END;
I do have full access on this folder. Once it recognizes the file I can send the mail.
Appreciate any help on this. Plz...........
Thanks,
JP

Thank you for the quick reply Srini.
But my email program is working fine if I change the path from %APPLCSF%APPLOUT to Customtop\out directory to identify the file. It was sent the attachment also to my email id.
But my requirement is I need to send the file from Out directory not from customtop out . Even it is not recognized the .out file using this UTL_File.fgetattr() in out directory.
Appreciate any furthur assistance.
Thanks,
JP

BPM dont return (catch) error occured in Adapter

Guys,
I created my scenario with BPM.
Details:
Design:
MI_TESTE_SEND_outb - Outbound, Sync
MI_TESTE_outb - Abstract, Sync
MI_TESTE_ABS - Abstract, Async
MI_TESTE_inb - Inbound, Async
BPM
Send1 - Open Bridge,
mesage - MI_TESTE_ABS
sync message - MI_TESTE_outb
Receive1 - Async
message - MI_TESTE_ABS, create new transaction
Receive2 - Close Bridge of Receive1
message - MI_TESTE_ABS
Configuration:
No errors in configurations, i create SOAP Adapter Receiver for use in Receive1 from BPM
The send is a RFC Sender.
When i launch the process, in SOAP Adapter occurs errors (url invalid), but in SXI_MONITOR dont show errors, otherwise, my process is completed and ok.
That occurs because the error found in Adapter and my BPM dont catch the error.
Can anybody tell me, how can i catch the error from Adapter in my BPM? How can i return from RFC the that error?

João,
Could you explain the scenario plz? Coz the steps which u've given is confusing a lot.
raj.

ORA-29279: SMTP permanent error: 501 5.5.2

im getting the error
ORA-29279: SMTP permanent error: 501 5.5.2 Syntax error in parameters scanning "FROM"
kindly help . What is the problem exactly?

I'm having this same issue now.
This doesn't happen to my other databases on another server.
Basically, I have a startup trigger that sends out mail, and I'm finding on database on a particular (new) server, UTL_SMTP is getting this error.
Have you figured out your root cause?

ORA-29279: SMTP permanent error: 554 5.5.1 Error: no valid recipients

Hi ,
Following error msg coming when notification was sending to mail .
ORA-29279: SMTP permanent error: 554 5.5.1 Error: no valid recipients
Please advise how to clear this error.
Thanks&Regards
Ranganath Konikineni

It's not related to oracle. Check How you made the connection with SMTP server and to whom you are sending the mail.
Post your code with tag like {noformat} Your lines of code {noformat}

BPM: skip a permanent error in a sequential ForEach ? Possible ?

Similar Messages

Maybe you are looking for