BPM Studio Task Send XML to Client Actions

After I do the Send XML to Client from the exeucte tab of an action...instead of
marking the task as done on the call back actions...i try to mark the same task
as done in the next task after a decision box....it doesnt seem to work?
any ideas? should you always mark a task as done on the same task?

Hi Sudhar.
I don't think your workflow will execute the next node before you mark the current
node as done. Conseqently setting the done in the decision box isn't possible.
Giora
"Sudhar" <[email protected]> wrote:
>
After I do the Send XML to Client from the exeucte tab of an action...instead
of
marking the task as done on the call back actions...i try to mark the
same task
as done in the next task after a decision box....it doesnt seem to work?
any ideas? should you always mark a task as done on the same task?

Similar Messages

Send XML to client: message box

Hi,
In a BPM workflow I'm putting together, I need to open a message box for information
(title, message, OK button). In the documentation, I found that I should send
an XML document to a client that looks like this:
<message-box title="title" style="information" options="ok">
<actionid>"1013679664318"</actionid>
</message-box>
Which I did: I added a "Send XML to client" action in the "True" part of a decision
node with a message-box element and its attributes, and actionid as a nested element.
When I trigger the workflow, it goes through all the expected steps but the window
does not pop up at all. I could not find the reason why anywhere. So has anyone
experienced the same problem ? If yes, how did you solve it ?
Cheers,
Yann

Hi Sudhar.
I don't think your workflow will execute the next node before you mark the current
node as done. Conseqently setting the done in the decision box isn't possible.
Giora
"Sudhar" <[email protected]> wrote:
>
After I do the Send XML to Client from the exeucte tab of an action...instead
of
marking the task as done on the call back actions...i try to mark the
same task
as done in the next task after a decision box....it doesnt seem to work?
any ideas? should you always mark a task as done on the same task?

Jsp worklist in 7.02 - send xml to client

Does the worklist web application in 7.02 support messages with the "Send
XML To Client" action? There appears to be some JSP code related to
displaying message boxes or setting variables (message.jsp,
setvariables.jsp) but I don't see any reference to how it works in the
documentation. If anyone has gotten it to work, I would like to hear about
it.
If it's not supported, I would like to know if and when it will be
supported. If it is supported, I would also like to know where the
documentation is or when it will be documented. The current documentation
for Send XML to Client refers to the deprecated swing task list application.
Thanks, Hal

A co-worker of mine got the sendxmlclient to work with the worklist web
application. It works the same way it does for the swing tasklist
application, it just wasn't in the documentation that I could find. I must
have missed a step the first time I tried it. Anyway, it appears to work.
Maybe the query.jsp you mention that the docs refer to should actually be
the setvariables.jsp.
Hal
"Alex Thomas" <[email protected]> wrote in message
news:[email protected]..
My guess is that it's not quite there yet. As you say, message.jsp isthere
and the docs(http://e-docs.bea.com/wli/docs70/devclient/intro.htm#1052730)
refer to a query.jsp but it isn't in 7.02. We're currently using the
lightweight client sample for an equivalent mechanism but can't really
recommend this as it's deprecated and disappearing in 8.1
cheers
Alex
On Fri, 28 Mar 2003 18:22:12 -0500, "Hal Deadman" <[email protected]>
wrote:
Does the worklist web application in 7.02 support messages with the "Send
XML To Client" action? There appears to be some JSP code related to
displaying message boxes or setting variables (message.jsp,
setvariables.jsp) but I don't see any reference to how it works in the
documentation. If anyone has gotten it to work, I would like to hear
about
it.
If it's not supported, I would like to know if and when it will be
supported. If it is supported, I would also like to know where the
documentation is or when it will be documented. The current documentation
for Send XML to Client refers to the deprecated swing task listapplication.
>>
Thanks, Hal

Worklist send-xml-to-client functionality

Hi there
Quick question on wli 8.1. I have made extensive use in the past of the
send xml to client business operation in WLI 7. Is there any sort of
equivalent/how would this be achieved. Does the new worklist actually
support this kind of functionality?
Regards

A co-worker of mine got the sendxmlclient to work with the worklist web
application. It works the same way it does for the swing tasklist
application, it just wasn't in the documentation that I could find. I must
have missed a step the first time I tried it. Anyway, it appears to work.
Maybe the query.jsp you mention that the docs refer to should actually be
the setvariables.jsp.
Hal
"Alex Thomas" <[email protected]> wrote in message
news:[email protected]..
My guess is that it's not quite there yet. As you say, message.jsp isthere
and the docs(http://e-docs.bea.com/wli/docs70/devclient/intro.htm#1052730)
refer to a query.jsp but it isn't in 7.02. We're currently using the
lightweight client sample for an equivalent mechanism but can't really
recommend this as it's deprecated and disappearing in 8.1
cheers
Alex
On Fri, 28 Mar 2003 18:22:12 -0500, "Hal Deadman" <[email protected]>
wrote:
Does the worklist web application in 7.02 support messages with the "Send
XML To Client" action? There appears to be some JSP code related to
displaying message boxes or setting variables (message.jsp,
setvariables.jsp) but I don't see any reference to how it works in the
documentation. If anyone has gotten it to work, I would like to hear
about
it.
If it's not supported, I would like to know if and when it will be
supported. If it is supported, I would also like to know where the
documentation is or when it will be documented. The current documentation
for Send XML to Client refers to the deprecated swing task listapplication.
>>
Thanks, Hal

Struggling with Send XML to client

Hi,
I am using WL Process Integrator 2.1 with WL 6.1.
I am trying to do do an example of the "Client Call Addin Response DTD" i.e. pass
an XML document to an external java
program.
As given in docs :
http://e-docs.bea.com/wli/docs70/devclient/appa.htm#1120726
1. I have created a template definition
2. Defined a XML doc. (as per the Client Callin Request DTD) and attached to ActionSendXMLToClient
event as shown below.
<call-addin name="mywlpi.addinimpl" mode="async">
<actionid>959395846210</actionid>
<parm>itemNumber</parm>
</call-addin>
3. "mywlpi.addinimpl" is a java program I created
4. Now, the problem I run into is when I run from Worklist (Swing client program),
it errors out saying it cannot find this
class file:
ClassNotFoundException: mywlpi.AddInImpl
java.lang.ClassNotFoundException: mywlpi.AddInImpl
at java.net.URLClassLoader$1.run(URLClassLoader.java:200)
5. I have included the class file in a .jar and included in the
SVRCP of startWebLogic.cmd file. Also, when I create a Business
Operation from Studio, I can locate this Java class. So, I am
not sure what is missing. The strange part is when I run from the
Worklist JSP page, it errors out saying :
"Cannot execute this task, because it is already done." The task
is not yet done.
Is there someone who can help me here? Any suggestions
appreciated!!
Thanks,
SLN

Hi Sudhar.
I don't think your workflow will execute the next node before you mark the current
node as done. Conseqently setting the done in the decision box isn't possible.
Giora
"Sudhar" <[email protected]> wrote:
>
After I do the Send XML to Client from the exeucte tab of an action...instead
of
marking the task as done on the call back actions...i try to mark the
same task
as done in the next task after a decision box....it doesnt seem to work?
any ideas? should you always mark a task as done on the same task?

Send XML to Client: call-program cannot pass ampersand in parameter

In WLI Studio, I have tried to use the action "Send XML to Client" with
following information:
<call-program mode="async" name="IEXPLORE.EXE">
<actionid>1027425345078</actionid>
<parm>http://pttserver:7001/pttWebApp/Test.jsp?First=a&Second=b&Third=c</par
m>
</call-program>
The problem is that the ampersand (&) of call-program parameter will always
shift three character right on any program (e.g., IE, Notepad, etc.).
From the above example, IE can be called correctly, but its parameter -- a
string
"http://pttserver:7001/pttWebApp/Test.jsp?First=a&Second=b&Third=c", will be
passed as
"http://pttserver:7001/pttWebApp/Test.jsp?First=aSec&ond=bThi&rd=c".
I have also tried to use the string "&" instead of an ampersand, and the
parameter was passed as
"http://pttserver:7001/pttWebApp/Test.jsp?First=aamp&;Second=bamp&;Third=c".
What should be used in order to pass the ampersand character correctly?
If it is a bug, can any one suggest the workaround?
Thankyou in advance,
Suwanee Suwanapong

If you think you're encountering URL length issues make sure you are using POST and not GET, although it looks like there may be additional issues: http://www.javaworld.com/community/node/2307

Xml to client call in bpm

Hi
i have a client application which starts the bpm workflow i need to pass
back an xml using xml to client action , need to know how dopes bpm do it in
a synchronous mode and what all does the client need to have to accept the
xml and retrun a response back
replies appreciated
Ravi

Hi Sudhar.
I don't think your workflow will execute the next node before you mark the current
node as done. Conseqently setting the done in the decision box isn't possible.
Giora
"Sudhar" <[email protected]> wrote:
>
After I do the Send XML to Client from the exeucte tab of an action...instead
of
marking the task as done on the call back actions...i try to mark the
same task
as done in the next task after a decision box....it doesnt seem to work?
any ideas? should you always mark a task as done on the same task?

How to send XML files through Business Connector to client URL

Dear ALL
I am new to SAP BC. We have setup BC 4.8 and would like to send out a XML file from BC to Client URL. Could someone please guide me.
Please suggest solutions.
Thanks
Ahmed

Hello Mickael
Thanks for your reply. No, we do not have PI. This BC will be used for point to point communication with client.
Scenario:
R/3 server to send XML files to BC. BC will load these files ( using pub.getfile service), this file is to be parsed using pub.loaddocument service and then sent to client in XML format wrapped with digital signature. As i am new to BC i am unable to parse this file and wrap it with the digital signaature to send it.
Kindly advise on how best can we perform this action.
Thanks
Ahmed

Sending xml file from client to servlet

Hi,
I am writing the server component of an applcation, such that it will receive xml files from the clients(standalone application similar to javaSwing stuff but it's coded in C#), and the servlet will have to extract the data from the xml file and update the mySql database. it will also fulfill the client's request for xmlFiles (and extract data from DB, format to xml file and send back to client)
I'm new to implementing the servlet receiving files from clients so would need some help.
I've got 3 questions to ask:
1) How does the servlet receive/returns the xml file from the client as a series of httpPost request/response. Do i send a File or the file's contents as a String to/from the client?
2) Is it also a must to use socket for the file transfers? I have read in other posts about sockets as well as HttpURLConnection but i don't quite understand.
3) When I send a file back to the client(client is standalone application written in C# whereas server is coded in java), what do i specify for the HttpResponse.setContentType() in my servlet? (i'm returning the xml file to client)
Would really appreciate for any help rendered. If you have any useful links, would appreciate them too. Thanks a lot.
Karen

I've got 3 questions to ask:
1) How does the servlet receive/returns the xml file
from the client as a series of httpPost
request/response. Do i send a File or the file's
contents as a String to/from the client?The server will listen on some port for requests. The client has to open a socket to this server to send the file as string to the server.
see http://java.sun.com/docs/books/tutorial/networking/index.html
>
2) Is it also a must to use socket for the file
transfers? I have read in other posts about sockets as
well as HttpURLConnection but i don't quite
understand.You use HttpURLConnection to make a request using the http protocol, instead of opening a socket and then writing the html headers yourself.
3) When I send a file back to the client(client is
standalone application written in C# whereas server is
coded in java), what do i specify for the
HttpResponse.setContentType() in my servlet? (i'm
returning the xml file to client)Its up to your receiving program how to interpret this though, so you probably dont need this.

How do I Send a xml to client?

Hi friends:
It is possible to send a xml to client without a xml file in the server?
I create a Document in the server and the code is :
                                                               DocumentBuilderFactory df=DocumentBuilderFactory.newInstance();
               DocumentBuilder db=df.newDocumentBuilder();
               Document doc=db.newDocument();
               Element el=doc.createElement("root");
               doc.appendChild(el);
               Comment co=doc.createComment("This is a comment");
               el.appendChild(co);I want to write the Document to a Stream and send the XML stream to client ,so the client can display a xml.
The code is:
                                                               resp.setContentType("text/xml");
               resp.setContentLength(200);
               resp.setHeader("Content-Disposition","inline;filename=address.xml");
               ServletOutputStream so=resp.getOutputStream();
               PrintStream ps=new PrintStream(so);
               System.out.println(doc);
               ps.print(doc);
               so.flush();
               ps.close();I don't want to create a xml in the server so I can do this only use stream .But what client get is a momery address! It is org.dom.xml....@sd7fs87d What wrong with my code ? How to send the xml to client without create the xml file in server?
Thks in advanced!

Yashnoo,
What XML package that you used?
It should have a class for outputing xml
example using JDOM
XMLOutputter writer = new XMLOutputter(Format.getPrettyFormat());
OutputStream out = new FileOutputStream("dummy.txt");
writer.output(doc, out);
//this case it write to a file but in your case you can pass in ServletOutputStream
or ByteArrayOutPutStream then use method writeTo() to send it to ServletOutputStream
another thing, make sure to set your content length corretly,
resp.setContentLength(200);
how do you know its length is 200
if you are going to use ByteArrayOutPutStream, it will give you the correct length
for instance
ByteArrayOutPutStream out = new ByteArrayOutPutStream ();
XMLOutputter writer = new XMLOutputter(Format.getPrettyFormat());
writer.output(doc, out);
int len = out.size();
now you can do this
resp.setContentLength(len);
finally,
out.writeTo(resp.getOutputStream());
it should send a stream out to the client.
bottom line is, find out your package API or you can post the package you use, I can take a look
here is a sample of using JDOM to create a document then output it out to System.out
good luck
public static void createXMLFile()
          Element root = null;
          Document doc = new Document();
          try
               String[] arr = {"MainElement ","SubElement1","SubElement2","SubElement2"};
               String[] arr1 = {"MainElement ","SubElement111","SubElement22","SubElement332"};
               root = new Element("root");
               doc.setRootElement(root);
               //for each array do the following
               Element e = new Element(arr[0].trim());
               root.addContent(e);     //<MainElement>
               for (int i = 1; i < arr.length; i++)
                    e.addContent(new Element(arr.trim()));     //<SubElement1>
               //finally output to a file as your choice
               XMLOutputter writer = new XMLOutputter(Format.getPrettyFormat());
//               OutputStream out = new FileOutputStream("dummy.txt");
               writer.output(doc, System.out);
//               out.flush();
//               out.close();
          catch (Exception e)
               e.printStackTrace();

Server to Rich Client sending XML over Http

I need to send XML data from a Servlet to a rich client over http.
Currently I am using HttpURLConnection and SaxTransformerFactory to do this.
Is it better to use SOAP or XML-RPC in this scenario?
Are there any good online tutorials comparing SOAP, XML-RPC and AXP-Java Net API?
What are the factors that I need to consider for choosing between these alternatives?
Please advice. Thanks in advance.

XML-RPC and SOAP use XML as a way to communicate, but they are used to invoke certain function calls in an application independend manner, not to be used to send XML data. So I'd say it depends on:
a) what do you do with the XML data?
b) will you be expanding the application?
c) how difficult is it to rework the current implementation?

Xml to client call from bpm

Hi ,
how does the client application receive the xml to client data from the
bpm.Does the bpm use an internal jms queue or is there a direct call to the
application .and what all does the client need to implement for the same .
does the client need to have an event listener
regds
Ravi

Hi ,
how does the client application receive the xml to client data from the
bpm.Does the bpm use an internal jms queue or is there a direct call to the
application .and what all does the client need to implement for the same .
does the client need to have an event listener
regds
Ravi

Authentication error using PAPI-WS for BPM Studio 10.3

I followed the steps laid out in the material from this thread using SOAP UI:
PAPI Web Service (PAPI-WS) Example for Oracle BPM Studio
It seems that BPM Studio does not recognize the default credentials user: "test" and password: "test"
I receive the following error when I try to make any call:
<S:Envelope xmlns:S="http://schemas.xmlsoap.org/soap/envelope/">
<S:Body>
<S:Fault xmlns:ns3="http://www.w3.org/2003/05/soap-envelope">
<faultcode>S:Client</faultcode>
<faultstring>Participant could not be authenticated. A wrong username or password might have been specified.</faultstring>
<detail>
<oens:OperationException xmlns:oens="http://bea.com/albpm/PapiWebService">
<exceptionName>fuego.papi.webservice.handlers.AuthenticationException</exceptionName>
<message>Participant could not be authenticated. A wrong username or password might have been specified.</message>
<technicalInfo>fuego.papi.webservice.handlers.AuthenticationException: Participant could not be authenticated. A wrong username or password might have been specified.
     at fuego.papi.webservice.handlers.AuthenticationHandler.processAuthentication(AuthenticationHandler.java:144)
     at fuego.papi.webservice.handlers.AuthenticationHandler.handleMessage(AuthenticationHandler.java:74)
     at fuego.papi.webservice.handlers.AuthenticationHandler.handleMessage(AuthenticationHandler.java:46)
     at com.sun.xml.ws.handler.HandlerProcessor.callHandleMessage(HandlerProcessor.java:292)
     at com.sun.xml.ws.handler.HandlerProcessor.callHandlersRequest(HandlerProcessor.java:135)
     at com.sun.xml.ws.handler.ServerSOAPHandlerTube.callHandlersOnRequest(ServerSOAPHandlerTube.java:133)
     at com.sun.xml.ws.handler.HandlerTube.processRequest(HandlerTube.java:116)
     at com.sun.xml.ws.api.pipe.Fiber.__doRun(Fiber.java:595)
     at com.sun.xml.ws.api.pipe.Fiber._doRun(Fiber.java:554)
     at com.sun.xml.ws.api.pipe.Fiber.doRun(Fiber.java:539)
     at com.sun.xml.ws.api.pipe.Fiber.runSync(Fiber.java:436)
     at com.sun.xml.ws.server.WSEndpointImpl$2.process(WSEndpointImpl.java:243)
     at com.sun.xml.ws.transport.http.HttpAdapter$HttpToolkit.handle(HttpAdapter.java:444)
     at com.sun.xml.ws.transport.http.HttpAdapter.handle(HttpAdapter.java:244)
     at com.sun.xml.ws.transport.http.servlet.ServletAdapter.handle(ServletAdapter.java:135)
     at com.sun.xml.ws.transport.http.servlet.WSServletDelegate.doGet(WSServletDelegate.java:129)
     at com.sun.xml.ws.transport.http.servlet.WSServletDelegate.doPost(WSServletDelegate.java:160)
     at com.sun.xml.ws.transport.http.servlet.WSServlet.doPost(WSServlet.java:75)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:709)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:243)
     at java.security.AccessController.doPrivileged(Native Method)
     at javax.security.auth.Subject.doAsPrivileged(Unknown Source)
     at org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:275)
     at org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:161)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:245)
     at org.apache.catalina.core.ApplicationFilterChain.access$000(ApplicationFilterChain.java:50)
     at org.apache.catalina.core.ApplicationFilterChain$1.run(ApplicationFilterChain.java:156)
     at java.security.AccessController.doPrivileged(Native Method)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:152)
     at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:213)
     at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:178)
     at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:126)
     at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:105)
     at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:107)
     at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:148)
     at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:869)
     at org.apache.coyote.http11.Http11BaseProtocol$Http11ConnectionHandler.processConnection(Http11BaseProtocol.java:667)
     at org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:527)
     at org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFollowerWorkerThread.java:80)
     at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:684)
     at java.lang.Thread.run(Unknown Source)
Caused by: fuego.papi.exception.AuthenticationException: Cannot authenticate participant 'test'.
     at fuego.papi.impl.ProcessServiceImpl.authenticatePassport(ProcessServiceImpl.java:297)
     at fuego.papi.webservice.pool.ProcessServiceSessionPoolManager.getSession(ProcessServiceSessionPoolManager.java:185)
     at fuego.papi.webservice.WebServiceManager.getProcessServiceSession(WebServiceManager.java:156)
     at fuego.papi.webservice.handlers.AuthenticationHandler.processAuthentication(AuthenticationHandler.java:141)
     ... 45 more
Caused by: fuego.directory.AuthenticationException: Login incorrect.
Detail:Verify that the information provided is correct.
If you cannot solve the problem, check with your administrator.
ID [default] PARTICIPANT [test] REASON [Login incorrect.
Detail:Verify that the information provided is correct.
If you cannot solve the problem, check with your administrator.
ID [Project:Test] PARTICIPANT [test] REASON [invalid username or password].
     at fuego.directory.AuthenticationException.wrap(AuthenticationException.java:104)
     at fuego.directory.project.engine.EmbeddedEngineAuthenticationAccessor.connect(EmbeddedEngineAuthenticationAccessor.java:69)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at fuego.directory.provider.DirectorySessionImpl$AccessorProxy.invoke(DirectorySessionImpl.java:756)
     at $Proxy12.connect(Unknown Source)
     at fuego.directory.provider.DirectorySessionImpl.connect(DirectorySessionImpl.java:250)
     at fuego.directory.provider.Factory.startSession(Factory.java:405)
     at fuego.directory.Directory.startSession(Directory.java:268)
     at fuego.papi.impl.ProcessServiceImpl.authenticatePassport(ProcessServiceImpl.java:287)
     ... 48 more
Caused by: fuego.directory.AuthenticationException: Login incorrect.
Detail:Verify that the information provided is correct.
If you cannot solve the problem, check with your administrator.
ID [Project:Test] PARTICIPANT [test] REASON [invalid username or password].
     at fuego.directory.project.engine.ProjectFullParticipantsAccessor.fetchHumanParticipant(ProjectFullParticipantsAccessor.java:82)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at fuego.directory.provider.DirectorySessionImpl$AccessorProxy.invoke(DirectorySessionImpl.java:756)
     at $Proxy15.fetchHumanParticipant(Unknown Source)
     at fuego.directory.project.engine.EmbeddedEngineAuthenticationAccessor.connect(EmbeddedEngineAuthenticationAccessor.java:66)
     ... 58 more</technicalInfo>
</oens:OperationException>
</detail>
</S:Fault>
</S:Body>
</S:Envelope>
Like I said above, it seems that BPM Studio does not recognize the default credentials user: "test" and password: "test"
Is there anyway to change these default credentials?
Thanks!
Edited by: user9001687 on Feb 10, 2010 2:14 PM
Edited by: user9001687 on Feb 10, 2010 2:16 PM

Thanks so much Dan. I changed as you mentioned and then added WSS-Username Token as while processing BPM process as web service I have used the same opetion. Still I am getting the same error for Authorization Failure.
SOAP Requests look like :
<soapenv:Envelope xmlns:pps="http://bea.com/albpm/ProLogisBPM/PPSFTProcess" xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
<soapenv:Header>
<wsse:Security soapenv:mustUnderstand="1" xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd">
<wsse:UsernameToken wsu:Id="UsernameToken-2" xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">
<wsse:Username>Paul</wsse:Username>
<wsse:Password Type="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#PasswordText">Paul</wsse:Password>
<wsse:Nonce EncodingType="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-soap-message-security-1.0#Base64Binary">AlmoI4QkO2hp9z10BQGA0A==</wsse:Nonce>
<wsu:Created>2010-03-17T15:48:04.843Z</wsu:Created>
</wsse:UsernameToken>
</wsse:Security>
</soapenv:Header>
<soapenv:Body>
Adter
<ns1:stackTrace xmlns:ns1="http://xml.apache.org/axis/">fuego.webservices.security.AuthorizationException: Authorization Failed.
     at fuego.soaptype.ProcessWebServiceAuthorization.authorize(ProcessWebServiceAuthorization.java:57)
     at fuego.soaptype.AxisSoapService$HttpBasicAuthentitcationHandler.invoke(AxisSoapService.java:888)
     at org.apache.axis.strategies.InvocationStrategy.visit(InvocationStrategy.java:32)
     at org.apache.axis.SimpleChain.doVisiting(SimpleChain.java:118)
     at org.apache.axis.SimpleChain.invoke(SimpleChain.java:83)
     at org.apache.axis.strategies.InvocationStrategy.visit(InvocationStrategy.java:32)
     at org.apache.axis.SimpleChain.doVisiting(SimpleChain.java:118)
     at org.apache.axis.SimpleChain.invoke(SimpleChain.java:83)
     at org.apache.axis.strategies.InvocationStrategy.visit(InvocationStrategy.java:32)
     at org.apache.axis.SimpleChain.doVisiting(SimpleChain.java:118)
     at org.apache.axis.SimpleChain.invoke(SimpleChain.java:83)
     at org.apache.axis.handlers.soap.SOAPService.invoke(SOAPService.java:453)
     at org.apache.axis.server.AxisServer.invoke(AxisServer.java:281)
     at fuego.soaptype.AxisSoapService.invoke(AxisSoapService.java:357)
     at fuego.soaptype.AxisSoapService.invoke(AxisSoapService.java:122)
     at fuego.webservices.HttpSoapListener.process(HttpSoapListener.java:206)
     at fuego.http.HttpExecution$1.run(HttpExecution.java:71)
     at fuego.component.Message.process(Message.java:576)
     at fuego.component.ExecutionThread.processMessage(ExecutionThread.java:780)
     at fuego.component.ExecutionThread.processBatch(ExecutionThread.java:755)
     at fuego.component.ExecutionThread.doProcessBatch(ExecutionThread.java:142)
     at fuego.component.ExecutionThread.doProcessBatch(ExecutionThread.java:134)
     at fuego.http.HttpExecution$HttpPrincipal.processBatch(HttpExecution.java:190)
     at fuego.component.ExecutionThread.work(ExecutionThread.java:839)
     at fuego.component.ExecutionThread.run(ExecutionThread.java:408)
Caused by: java.lang.IllegalArgumentException: user: null
     at fuego.components.WebServiceSessionManager.createSession(WebServiceSessionManager.java:88)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at fuego.lang.JavaClass.invokeMethod(JavaClass.java:1410)
     at fuego.lang.JavaObject.invoke(JavaObject.java:227)
     at fuego.lang.Invokeable.invokeImpl(Invokeable.java:234)
     at fuego.lang.Invokeable.invokeDynamic(Invokeable.java:188)
     at fuego.lang.Invokeable.invoke(Invokeable.java:160)
     at fuego.fengine.FEngineWebServiceExecutor$2.execute(FEngineWebServiceExecutor.java:133)
     at fuego.server.execution.DefaultEngineExecution$AtomicExecutionTA.runTransaction(DefaultEngineExecution.java:304)
     at fuego.transaction.TransactionAction.startBaseTransaction(TransactionAction.java:470)
     at fuego.transaction.TransactionAction.startTransaction(TransactionAction.java:551)
     at fuego.transaction.TransactionAction.start(TransactionAction.java:212)
     at fuego.server.execution.DefaultEngineExecution.executeImmediate(DefaultEngineExecution.java:123)
     at fuego.server.execution.EngineExecution.executeImmediate(EngineExecution.java:66)
     at fuego.fengine.FEngineWebServiceExecutor$1.run(FEngineWebServiceExecutor.java:65)
     at fuego.component.Message.process(Message.java:576)
     at fuego.component.ExecutionThread.processMessage(ExecutionThread.java:780)
     at fuego.component.ExecutionThread.processBatch(ExecutionThread.java:755)
     at fuego.component.ExecutionThread.doProcessBatch(ExecutionThread.java:142)
     at fuego.component.ExecutionThread.doProcessBatch(ExecutionThread.java:134)
     at fuego.fengine.FEngineProcessBean.processBatch(FEngineProcessBean.java:244)
     at fuego.fengine.FEngineWebServiceExecutor$WebServiceExecutorPrincipal.processBatch(FEngineWebServiceExecutor.java:168)
     ... 2 more
Caused by: fuego.directory.AuthenticationException: Login incorrect.
Detail:Verify that the information provided is correct.
If you cannot solve the problem, check with your administrator.
ID [default] PARTICIPANT [null] REASON [participant is empty].
     at fuego.directory.AuthenticationException.error(AuthenticationException.java:50)
     at fuego.directory.AuthenticationException.participantIdIsWrong(AuthenticationException.java:94)
     at fuego.components.WebServiceSessionManager$SessionImpl.<init>(WebServiceSessionManager.java:220)
     at fuego.components.WebServiceSessionManager.createSession(WebServiceSessionManager.java:79)
     ... 26 more</ns1:stackTrace>
Any help or guiding pointer would be deeply appreciated. TIA

Error in jdevelper 11g when opening a project exported from bpm studio 10.3

Hello I hope someone can help me with this error, thanks in advance.
I installed soa suite 11G (including ps2) but when i open a project exported from bpm studio 10.3 i have the following error.
"An unexpected severe error has ocurred in jdeveloper"
Performing action JDeveloper Forum[ from oracle.ide.log.MessagePage ]
Performing action About[ from oracle.ide.log.MessagePage ]
Invoking command: [ from oracle.ide.log.MessagePage ]
Performing action Open...[ from oracle.ide.log.MessagePage ]
Performing action Open...[ from oracle.bpm.fusion.ui.editor.FusionEditor ]
Performing action Open...[ from oracle.ide.ceditor.CodeEditor ]
Performing action Close All[ from oracle.ide.ceditor.CodeEditor ]
Performing action Import...[ from oracle.ide.navigator.ApplicationNavigatorWindow ]
Jul 15, 2010 1:36:03 PM oracle.bpm.project.io.serializers.model.bpmn.BPMN20Loader load
SEVERE: unexpected element (uri:"http://www.wfmc.org/2004/XPDL2.0alpha", local:"Package"). Expected elements are <{http://xmlns.oracle.com/bpm/OracleExtensions}Annotations>,<{http://xmlns.oracle.com/bpm/OracleExtensions}AttributeExpression>,<{http://xmlns.oracle.com/bpm/OracleExtensions}BooleanFeature>,
......................... .... >
javax.xml.bind.UnmarshalException: unexpected element (uri:"http://www.wfmc.org/2004/XPDL2.0alpha", local:"Package"). Expected elements are <{http://xmlns.oracle.com/bpm/OracleExtensions}Annotations>,<{http://xmlns.oracle.com/bpm/OracleExtensions}AttributeExpression>,<{http://xmlns.oracle.com/bpm/OracleExtensions}BooleanFeature>,
<{http://www.omg.org/bpmn20}userTask>

Hi,
I have the same error. Please if you have the solution or any workaround, i 'll very appreciate if you post it here
Thanks in advance!

How to kill an instance process in BPM studio 6.0

Hi i'm Fabio.
I'm working on BPM Studio 6.0 and i need to complete a task.
I have an instance id process, and i need to create a new process in order to kill this istance id.
I read how to create a PAPI client (http://download.oracle.com/docs/cd/E13154_01/bpm/docs65/papi/index.html?t=modules/papi/c_Writing_Your_First_Java_PAPI_Program.html) but it doesn't work for my purpose.
First of all, i understood that i have to follow these step:
* Import the required libraries.
* Create a process service.
* Create a process service session.
* Perform operations with PAPI.
* Close the process service.
Now, i'm working on my xpdl file and i'm using the Standard Module "Fuego" and my plan is to create a process servcie, a process service session and then operate with PAPI.
But using the PAPI module include in the BPM studio 6.0 i'm no able to load the library for the session import fuego.papi.ProcessServiceSession;
so i'm worng something. Could you tell me how can menage this problem? Really do i need a session? Is possible to abort an istance process in BPM studio or i need to load my ear project in Enterprise environment and then kill my instance process? Thanks, regards Fabio.

Thanks Dan, i read your suggestion but my boss was to implement a different solution:
package hp.abort.process;
import fuego.boot.*;
import fuego.papi.CommunicationException;
import fuego.papi.InstanceInfo;
import fuego.papi.InstanceId;
import fuego.papi.ProcessService;
import fuego.papi.ProcessServiceSession;
import fuego.papi.OperationException;
import java.util.Properties;
import javax.transaction.*;
import java.lang.Exception;
public class AbortProcess {
public static void main(String[] args) {
/////////////////// API Initialization ///////////////////
Properties configuration = new Properties();
configuration.setProperty(ProcessService.DIRECTORY_ID, "default");
configuration.setProperty(ProcessService.PROJECT_PATH, "C:/Documents and Settings/Administrator/AlbpmWorkspace/EarOMatic");
configuration.setProperty(ProcessService.WORKING_FOLDER, "C:/tmp");
try {
ProcessService processService = ProcessService.create(configuration);
/////////////////// Establish a session ///////////////////
ProcessServiceSession session = processService.createSession("adminEarOMatic", "adminEarOMatic", "localhost");
/////////////////// Operate with PAPI ///////////////////
for (String processId : session.processesGetIds()) {
System.out.println("\n Process: " + processId);
for (InstanceInfo instance : session.processGetInstances(processId) ) {
System.out.println(" -> " + instance.getId());
System.out.println("ActivityName -> " + instance.getActivityName());
System.out.println("ActivityId -> "+ instance.getActivityId());
//Problema: nn vuole ActivityId ma Process Id
session.activityAbort("/CreateEurekaSRService#Default-1.0/eomWait","/CreateEurekaSRService#Default-1.0/1/0@EarOMatic");
/////////////////// Close the session ///////////////////
session.close();
/////////////////// Release API Resources ///////////////////
processService.close();
} catch (CommunicationException e) {
System.out.println("Could not connect to Directory Service");
e.printStackTrace();
} catch (OperationException e) {
System.out.println("Could not perform the requested operation");
e.printStackTrace();
Now, i got the following exception:
Local folder C:/tmp\system\Schema-4154784351820594721\catalogs found.
Loading catalogs from local folder: C:/tmp\system\Schema-4154784351820594721\catalogs
0 jars found locally.
[CatalogMgrCache] =======================
Registering CatalogMgr [EarOMatic] ...CatalogManagerCache 10390580:
Managers:
Counters:
[CatalogMgrCache] =======================
CatalogMgr [EarOMatic] REGISTERED!CatalogManagerCache 10390580:
Managers:
{EarOMatic=fuego.util.LocalCatalogManager@106df95}
Counters:
Process: /AbortInstanceProcessService#Default-1.0
Unreachable Engine Tolerance (seconds):
by default: 0
to be used: 0
This papi client will not cache exceptions which imply that an engine could not be reached.
Changing InstanceCache Entry[processId=/AbortInstanceProcessService#Default-1.0, state=0] to 3
Changing InstanceCache Entry[processId=/AbortInstanceProcessService#Default-1.0, state=3] to 2
Process: /CreateEurekaSRService#Default-1.0
Changing InstanceCache Entry[processId=/CreateEurekaSRService#Default-1.0, state=0] to 3
Changing InstanceCache Entry[processId=/CreateEurekaSRService#Default-1.0, state=3] to 2
-> /CreateEurekaSRService#Default-1.0/1/0
ActivityName -> eomWait
Adding local catalog for project: 1
ActivityId -> /CreateEurekaSRService#Default-1.0/eomWait
Exception in thread "main" fuego.server.exception.InvalidIdRuntimeException: Invalid identification.
Detail:Invalid identification (Identification value: /CreateEurekaSRService#Default-1.0/eomWait)
     at fuego.server.ActiveProcessImpl.getActivity(ActiveProcessImpl.java:632)
     at fuego.server.execution.microactivity.AbstractProcessExecutionHandler.getExecutableActivity(AbstractProcessExecutionHandler.java:58)
     at fuego.server.AbstractProcessBean.abortActivity(AbstractProcessBean.java:3262)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at fuego.lang.JavaClass.invokeMethod(JavaClass.java:1410)
     at fuego.lang.JavaObject.invoke(JavaObject.java:227)
     at fuego.component.Message.process(Message.java:587)
     at fuego.component.ExecutionThread.processMessage(ExecutionThread.java:778)
     at fuego.component.ExecutionThread.processBatch(ExecutionThread.java:753)
     at fuego.component.ExecutionThread.doProcessBatch(ExecutionThread.java:142)
     at fuego.component.ExecutionThread.doProcessBatch(ExecutionThread.java:134)
     at fuego.fengine.FEngineProcessBean.processBatch(FEngineProcessBean.java:248)
     at fuego.component.ExecutionThread.work(ExecutionThread.java:837)
     at fuego.component.ExecutionThread.run(ExecutionThread.java:408)
     at fuego.component.CustomExecution.next(CustomExecution.java:172)
     at fuego.component.ExecutorClient.invoke(ExecutorClient.java:118)
     at fuego.papi.impl.rmi.ProcessControlProxy.abortActivity(ProcessControlProxy.java:407)
     at fuego.papi.impl.rmi.ProcessControlProxyWrapper.abortActivity(ProcessControlProxyWrapper.java:683)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at fuego.papi.impl.AbstractProcessControlHandler.invokeInternal(AbstractProcessControlHandler.java:72)
     at fuego.papi.impl.rmi.RMIProcessControlHandler.invoke(RMIProcessControlHandler.java:165)
     at $Proxy23.abortActivity(Unknown Source)
     at fuego.papi.impl.ProcessInstanceOperation.abortActivity(ProcessInstanceOperation.java:726)
     at fuego.papi.impl.ProcessServiceSessionImpl.activityAbort(ProcessServiceSessionImpl.java:184)
     at hp.abort.process.AbortProcess.main(AbortProcess.java:45)
Caused by: fuego.metadata.exception.InvalidIdException: Activity '/CreateEurekaSRService#Default-1.0/eomWait' was not found in process '/CreateEurekaSRService#Default-1.0'.
     at fuego.metadata.Process.getActivity(Process.java:261)
     at fuego.server.ActiveProcessImpl.getActivity(ActiveProcessImpl.java:629)
     at fuego.server.execution.microactivity.AbstractProcessExecutionHandler.getExecutableActivity(AbstractProcessExecutionHandler.java:58)
     at fuego.server.AbstractProcessBean.abortActivity(AbstractProcessBean.java:3262)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at fuego.lang.JavaClass.invokeMethod(JavaClass.java:1410)
     at fuego.lang.JavaObject.invoke(JavaObject.java:227)
     at fuego.component.Message.process(Message.java:587)
     at fuego.component.ExecutionThread.processMessage(ExecutionThread.java:778)
     at fuego.component.ExecutionThread.processBatch(ExecutionThread.java:753)
     at fuego.component.ExecutionThread.doProcessBatch(ExecutionThread.java:142)
     at fuego.component.ExecutionThread.doProcessBatch(ExecutionThread.java:134)
     at fuego.fengine.FEngineProcessBean.processBatch(FEngineProcessBean.java:248)
     at fuego.component.ExecutionThread.work(ExecutionThread.java:837)
     at fuego.component.ExecutionThread.run(ExecutionThread.java:408)
I understood that tha activity id's format is not valid, but i obtained it just using the following function: instance.getActivityId()
Are you abel to give me some suggestion? Is it good this method to kill instance?
Thanks a lot, regard Fabio.

BPM Studio Task Send XML to Client Actions

Similar Messages

Maybe you are looking for